- 03 Jul, 2018 2 commits
-
-
Jerome Brunet authored
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Bard Liao authored
We are currently using power saving mode for button detection. However, it will impact the headset recording performance. This patch will switch button detection to normal mode in capture and switch to power saving mode in the end of capture. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 02 Jul, 2018 25 commits
-
-
Jerome Brunet authored
Add the VDD and AVDD power supplies to the DAPM graph as some board may need to enable a regulator to turn them on. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jerome Brunet authored
For each supported sample rate, the es7134 can work with several mclk / sample rate ratio. Check if ratio we get is actually OK. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jerome Brunet authored
64Khz is actually not supported by the es7134 according to the datasheet Fixes: 9000b59d ("ASoC: es7134: add es7134 DAC driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
The .set_pll() and .set_clkdiv() callbacks are considered legacy and should not be used anymore. In order to support PXA boards on DT platforms, remove them and let the code figure out the correct dividers and PLL base frequencies itself. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
Commit d767d3ce ("ASoC: pxa: provide PCM ops for ssp, i2s and ac97 components") created a build-time dependency to SND_PXA2XX_LIB but missed to reflect that in Kconfig. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 29 Jun, 2018 10 commits
-
-
KaiChieh Chuang authored
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
KaiChieh Chuang authored
use list_head for sub_dais, since original sub_dais array is sparsely occupied Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
This platform is no longer needed on DT boards, so let's remove them to avoid confusion. DT bindings should use the CPU DAIs (I2S/SSP/AC97) directly. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
Now that the functions are now available through pxa2xx-lib, hook them up to pxa-sspi, pxa-ac97 and pxa-i2s. This allows DT platforms to use the DAIs without a platform driver. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
While at it, also fix some indenting. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
To get rid of some intermediate platform layers, move pxa2xx_soc_pcm_new() and pxa2xx_pcm_ops in pxa2xx-lib. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
Clean up the namespace a bit and drop the __ prefix of all functions exported by pxa2xx-lib. This improves the readability of the code. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Daniel Mack authored
Now that the PXA SSP bits are ported over to generic DMA, the pxa2xx-pcm code only has a single user left. This patch folds the remaining bits into its only user and removes the unnecessary glue layer along with its header file. The include dependency to linux/dma/pxa-dma.h is also gone now. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Robert Jarzmik authored
As the pxa architecture switched towards the dmaengine slave map, the old compatibility mechanism to acquire the dma requestor line number and priority are not needed anymore. This patch simplifies the dma resource acquisition, using the more generic function dma_request_slave_channel(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 28 Jun, 2018 3 commits
-
-
Jerome Brunet authored
Extend dpcm_merge_chan to also check backend cpu dai channels capabilities. Apply the same policy as soc_pcm_init_runtime_hw() for multicodec links and only check cpu dai in this case. Cc: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
The > should be >= or we could read one element beyond the end of the port_maps[] array. Fixes: 7fa2d70f ("ASoC: qdsp6: q6afe: Add q6afe driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jerome Brunet authored
As it is, dpcm_runtime_update() performs the old path and new path update of a frontend before going on to the next frontend DAI. Depending the order of the FEs within the rtd list, the result of the update might be different. For example: * Frontend A connected to backend C, with a 48kHz playback * Frontend B connected to backend D, with a 44.1kHz playback * FE A appears before FE B in the rtd list of the card. If we reparent BE C to FE B (disconnecting BE D): * old path update of FE A will run first, and BE C will get hw_free() and shutdown() * new path update of FE B will run after and BE C, which is stopped, so it will be configured at 44.1kHz, as expected If we reparent BE D to FE A (disconnecting BE C): * new path update of FE A will run first but since BE D is still running at 44.1kHz, it won't be reconfigured (no call to startup() or hw_params()) * old path update of FE B runs after, nothing happens * In this case, we end up with a BE playing at 44.1kHz a stream which is supposed to be played at 48Khz (too slow) To improve this situation, this patch performs all the FE old paths update before going on to update the new paths. With this, the result should no longer depend on the order of the FE within the card rtd list. Please note that there might be a small performance penalty since dpcm_process_paths() is called twice per stream direction. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-