- 19 Jul, 2012 40 commits
-
-
H Hartley Sweeten authored
For aesthetic reasons, rename the function and pass the comedi_devconfig struct instead of pre-parsing out the bus/slot information. Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Consolidate the dev_err messages when a pci device is not found. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Since the pci_dev is no longer held in the provate data, we can also cleanup the detach a bit. Remove the IS_ENABLED() tests in the detach. If the pci_dev is non NULL it's a PCI device otherwise it's an ISA device. Using IS_ENABLED() to omit the code paths makes the code a bit confusing and doesn't save much. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, rename the function and pass the comedi_devconfig struct instead of pre-parsing out the bus/slot information. Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Consolidate the dev_err messages when a pci device is not found. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Since the pci_dev is no longer held in the provate data, we can also cleanup the detach a bit. Remove the IS_ENABLED() tests in the detach. If the pci_dev is non NULL it's a PCI device otherwise it's an ISA device. Using IS_ENABLED() to omit the code paths makes the code a bit confusing and doesn't save much. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, rename the function and pass the comedi_devconfig struct instead of pre-parsing out the bus/slot information. Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Consolidate the dev_err messages when a pci device is not found. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Add a couple local variables to make the tests more concise. Reorder the tests to make the for() loop checking for a matching boardtype quicker. Drop the dev_dbg for a match. It's just add noise. Reword the dev_err when no match is found. Signed-off-by:
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Add a couple local variables to make the tests more concise. Reorder the tests to make the for() loop checking for a matching boardtype quicker. Drop the dev_dbg message for a match. It's just add noise. Signed-off-by:
-
H Hartley Sweeten authored
This driver creates a linked list of all the pci devices in the system while it's looking for a match. It's only use is to determine if a device is "free" to use. The pci_is_enabled() helper can give us the same information. Use that instead and remove the linked list. Signed-off-by:
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Use pci_is_enabled() in the "find pci device" function to determine if the found pci device is not in use and move the comedi_pci_enable() call into the attach. Signed-off-by:
-
H Hartley Sweeten authored
Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Drop the printk error messages. They just add noise. Signed-off-by:
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Use pci_is_enabled() in the "find pci device" function to determine if the found pci device is not in use and move the comedi_pci_enable() call into the attach. Signed-off-by:
-
H Hartley Sweeten authored
Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Drop the printk error messages. They just add noise. Signed-off-by:
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Introduce a wrapper for to_pci_dev() to allow the comedi_pci_drivers to store the pci_dev pointer in the comedi_device hw_dev variable and retrieve it easily. Signed-off-by:
-
Toshiaki Yamane authored
The below checkpatch error was fixed, drivers/staging/cptm1217/cp_tm1217.h:5: ERROR: open brace '{' following struct go on the same line Signed-off-by:Toshiaki Yamane <yamanetoshi@gmail.com> Signed-off-by:
-
Lauri Hintsala authored
Signed-off-by:
Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by:
-
Toshiaki Yamane authored
The below checkpatch warns was fixed, drivers/staging/frontier/tranzport.c:356: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/tranzport.c:523: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/tranzport.c:696: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/alphatrack.c:336: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/alphatrack.c:497: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/alphatrack.c:568: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... Signed-off-by:
-
Toshiaki Yamane authored
The below checkpatch warns was fixed, drivers/staging/et131x/et131x.c:2556: WARNING: Prefer pr_info(... to printk(KERN_INFO, ... drivers/staging/et131x/et131x.c:2577: WARNING: Prefer pr_info(... to printk(KERN_INFO, ... drivers/staging/et131x/et131x.c:5189: WARNING: Prefer pr_info(... to printk(KERN_INFO, ... And fixed below, -added pr_fmt -fixed printk formats for dma_addr_t -converted printk to netdev_info Signed-off-by:
-
Marcos Paulo de Souza authored
This patch removes all references of "if 0" blocks in the sbe-2t3e3 driver. Signed-off-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by:
-
Duan Jiong authored
Signed-off-by:
Duan Jiong <djduanjiong@gmail.com> Signed-off-by:
-
Martyn Welch authored
The memcpy_fromio() and memcpy_toio() functions use the __memcpy() function, at least on x86. This function carries out transfers smaller than 32 bits as multiple 8 bit transfers, causing a single (aligned) 16 bit transfer to be split into 2 8 bit transfers which may not be supported by the target VME device. The commit 53059aa0 fixed this for the ca91cx42, however this was not fixed for the tsi148 at the time. This patch uses the same algorithm to fix the tsi148. Reported-by:
Daniel Lambert <daniel.lambert@clermont.in2p3.fr> Signed-off-by:
Martyn Welch <martyn.welch@ge.com> Signed-off-by:
-
