- 05 Mar, 2012 21 commits
-
-
Andrea Arcangeli authored
Dave Jones reports a few Fedora users hitting the BUG_ON(mm->nr_ptes...) in exit_mmap() recently. Quoting Hugh's discovery and explanation of the SMP race condition: "mm->nr_ptes had unusual locking: down_read mmap_sem plus page_table_lock when incrementing, down_write mmap_sem (or mm_users 0) when decrementing; whereas THP is careful to increment and decrement it under page_table_lock. Now most of those paths in THP also hold mmap_sem for read or write (with appropriate checks on mm_users), but two do not: when split_huge_page() is called by hwpoison_user_mappings(), and when called by add_to_swap(). It's conceivable that the latter case is responsible for the exit_mmap() BUG_ON mm->nr_ptes that has been reported on Fedora." The simplest way to fix it without having to alter the locking is to make split_huge_page() a noop in nr_ptes terms, so by counting the preallocated pagetables that exists for every mapped hugepage. It was an arbitrary choice not to count them and either way is not wrong or right, because they are not used but they're still allocated. Reported-by:
Dave Jones <davej@redhat.com> Reported-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Michael Cree said: : : I have noticed some user space problems (pulseaudio crashes in pthread : : code, glibc/nptl test suite failures, java compiler freezes on SMP alpha : : systems) that arise when using a 2.6.39 or later kernel on Alpha. : : Bisecting between 2.6.38 and 2.6.39 (using glibc/nptl test suite as : : criterion for good/bad kernel) eventually leads to: : : : : 8d7718aa is the first bad commit : : commit 8d7718aa : : Author: Michel Lespinasse <walken@google.com> : : Date: Thu Mar 10 18:50:58 2011 -0800 : : : : futex: Sanitize futex ops argument types : : : : Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic : : prototypes to use u32 types for the futex as this is the data type the : : futex core code uses all over the place. : : : : Looking at the commit I see there is a change of the uaddr argument in : : the Alpha architecture specific code for futexes from int to u32, but I : : don't see why this should cause a problem. Richard Henderson said: : futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, : u32 oldval, u32 newval) : ... : : "r"(uaddr), "r"((long)oldval), "r"(newval) : : : There is no 32-bit compare instruction. These are implemented by : consistently extending the values to a 64-bit type. Since the : load instruction sign-extends, we want to sign-extend the other : quantity as well (despite the fact it's logically unsigned). : : So: : : - : "r"(uaddr), "r"((long)oldval), "r"(newval) : + : "r"(uaddr), "r"((long)(int)oldval), "r"(newval) : : should do the trick. Michael said: : This fixes the glibc test suite failures and the pulseaudio related : crashes, but it does not fix the java compiiler lockups that I was (and : are still) observing. That is some other problem. Reported-by:
Michael Cree <mcree@orcon.net.nz> Tested-by:
Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Michel Lespinasse <walken@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by:
Matt Turner <mattst88@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hugh Dickins authored
When moving tasks from old memcg (with move_charge_at_immigrate on new memcg), followed by removal of old memcg, hit General Protection Fault in mem_cgroup_lru_del_list() (called from release_pages called from free_pages_and_swap_cache from tlb_flush_mmu from tlb_finish_mmu from exit_mmap from mmput from exit_mm from do_exit). Somewhat reproducible, takes a few hours: the old struct mem_cgroup has been freed and poisoned by SLAB_DEBUG, but mem_cgroup_lru_del_list() is still trying to update its stats, and take page off lru before freeing. A task, or a charge, or a page on lru: each secures a memcg against removal. In this case, the last task has been moved out of the old memcg, and it is exiting: anonymous pages are uncharged one by one from the memcg, as they are zapped from its pagetables, so the charge gets down to 0; but the pages themselves are queued in an mmu_gather for freeing. Most of those pages will be on lru (and force_empty is careful to lru_add_drain_all, to add pages from pagevec to lru first), but not necessarily all: perhaps some have been isolated for page reclaim, perhaps some isolated for other reasons. So, force_empty may find no task, no charge and no page on lru, and let the removal proceed. There would still be no problem if these pages were immediately freed; but typically (and the put_page_testzero protocol demands it) they have to be added back to lru before they are found freeable, then removed from lru and freed. We don't see the issue when adding, because the mem_cgroup_iter() loops keep their own reference to the memcg being scanned; but when it comes to mem_cgroup_lru_del_list(). I believe this was not an issue in v3.2: there, PageCgroupAcctLRU and PageCgroupUsed flags were used (like a trick with mirrors) to deflect view of pc->mem_cgroup to the stable root_mem_cgroup when neither set. 38c5d72f ("memcg: simplify LRU handling by new rule") mercifully removed those convolutions, but left this General Protection Fault. But it's surprisingly easy to restore the old behaviour: just check PageCgroupUsed in mem_cgroup_lru_add_list() (which decides on which lruvec to add), and reset pc to root_mem_cgroup if page is uncharged. A risky change? just going back to how it worked before; testing, and an audit of uses of pc->mem_cgroup, show no problem. And there's a nice bonus: with mem_cgroup_lru_add_list() itself making sure that an uncharged page goes to root lru, mem_cgroup_reset_owner() no longer has any purpose, and we can safely revert 4e5f01c2 ("memcg: clear pc->mem_cgroup if necessary"). Calling update_page_reclaim_stat() after add_page_to_lru_list() in swap.c is not strictly necessary: the lru_lock there, with RCU before memcg structures are freed, makes mem_cgroup_get_reclaim_stat_from_page safe without that; but it seems cleaner to rely on one dependency less. Signed-off-by:
-
Stephen Boyd authored
debugobjects is now printing a warning when a fixup for a NOTAVAILABLE object is run. This causes the selftest to fail like: ODEBUG: selftest warnings failed 4 != 5 We could just increase the number of warnings that the selftest is expecting to see because that is actually what has changed. But, it turns out that fixup_activate() was written with inverted logic and thus a fixup for a static object returned 1 indicating the object had been fixed, and 0 otherwise. Fix the logic to be correct and update the counts to reflect that nothing needed fixing for a static object. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Reported-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Muthu Kumar authored
Fix setting bio flags in drivers (sd_dif/floppy). Signed-off-by:
Muthukumar R <muthur@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Hugh Dickins authored
We have forgotten the rules of lock nesting: the irq-safe ones must be taken inside the non-irq-safe ones, otherwise we are open to deadlock: CPU0 CPU1 ---- ---- lock(&(&pc->lock)->rlock); local_irq_disable(); lock(&(&zone->lru_lock)->rlock); lock(&(&pc->lock)->rlock); <Interrupt> lock(&(&zone->lru_lock)->rlock); To check a different locking issue, I happened to add a spin_lock to memcg's bit_spin_lock in lock_page_cgroup(), and lockdep very quickly complained about __mem_cgroup_commit_charge_lrucare() (on CPU1 above). So delete __mem_cgroup_commit_charge_lrucare(), passing a bool lrucare to __mem_cgroup_commit_charge() instead, taking zone->lru_lock under lock_page_cgroup() in the lrucare case. The original was using spin_lock_irqsave, but we'd be in more trouble if it were ever called at interrupt time: unconditional _irq is enough. And ClearPageLRU before del from lru, SetPageLRU before add to lru: no strong reason, but that is the ordering used consistently elsewhere. Fixes 36b62ad5 ("memcg: simplify corner case handling of LRU"). Signed-off-by:Johannes Weiner <hannes@cmpxchg.org> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Anatolij Gustschin authored
If probing the RTC didn't succeed due to failed RTC register access, the RTC device will be unregistered. Then, when removing the module r9701_remove() causes a kernel crash while trying to unregister a not registered RTC device. Fix this by doing RTC register access test before RTC device registration. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Dan Carpenter authored
class_create() doesn't return a NULL, it only returns ERR_PTRs. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
class_create() never returns NULLs only ERR_PTRs. Signed-off-by:
-
Oleg Nesterov authored
check_hung_uninterruptible_tasks()->rcu_lock_break() introduced by "softlockup: check all tasks in hung_task" commit ce9dbe24 looks absolutely wrong. - rcu_lock_break() does put_task_struct(). If the task has exited it is not safe to even read its ->state, nothing protects this task_struct. - The TASK_DEAD checks are wrong too. Contrary to the comment, we can't use it to check if the task was unhashed. It can be unhashed without TASK_DEAD, or it can be valid with TASK_DEAD. For example, an autoreaping task can do release_task(current) long before it sets TASK_DEAD in do_exit(). Or, a zombie task can have ->state == TASK_DEAD but release_task() was not called, and in this case we must not break the loop. Change this code to check pid_alive() instead, and do this before we drop the reference to the task_struct. Note: while_each_thread() under rcu_read_lock() is not really safe, it can livelock. This will be fixed later, but fortunately in this case the "max_count" logic saves us anyway. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
Mandeep Singh Baines <msb@google.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Oleg Nesterov authored
Previously it was (ab)used by utrace. Then it was wrongly used by the scheduler code. Currently it is not used, kill it before it finds the new erroneous user. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Oleg Nesterov authored
Now that CLONE_VFORK is killable, coredump_wait() no longer needs complete_vfork_done(). zap_threads() should find and kill all tasks with the same ->mm, this includes our parent if ->vfork_done is set. mm_release() becomes the only caller, unexport complete_vfork_done(). Signed-off-by:
-
Oleg Nesterov authored
Make vfork() killable. Change do_fork(CLONE_VFORK) to do wait_for_completion_killable(). If it fails we do not return to the user-mode and never touch the memory shared with our child. However, in this case we should clear child->vfork_done before return, we use task_lock() in do_fork()->wait_for_vfork_done() and complete_vfork_done() to serialize with each other. Note: now that we use task_lock() we don't really need completion, we could turn task->vfork_done into "task_struct *wake_up_me" but this needs some complications. NOTE: this and the next patches do not affect in-kernel users of CLONE_VFORK, kernel threads run with all signals ignored including SIGKILL/SIGSTOP. However this is obviously the user-visible change. Not only a fatal signal can kill the vforking parent, a sub-thread can do execve or exit_group() and kill the thread sleeping in vfork(). Signed-off-by:
-
Oleg Nesterov authored
No functional changes. Move the clear-and-complete-vfork_done code into the new trivial helper, complete_vfork_done(). Signed-off-by:
-
Jeff Moyer authored
Bart Van Assche reported a hung fio process when either hot-removing storage or when interrupting the fio process itself. The (pruned) call trace for the latter looks like so: fio D 0000000000000001 0 6849 6848 0x00000004 ffff880092541b88 0000000000000046 ffff880000000000 ffff88012fa11dc0 ffff88012404be70 ffff880092541fd8 ffff880092541fd8 ffff880092541fd8 ffff880128b894d0 ffff88012404be70 ffff880092541b88 000000018106f24d Call Trace: schedule+0x3f/0x60 io_schedule+0x8f/0xd0 wait_for_all_aios+0xc0/0x100 exit_aio+0x55/0xc0 mmput+0x2d/0x110 exit_mm+0x10d/0x130 do_exit+0x671/0x860 do_group_exit+0x44/0xb0 get_signal_to_deliver+0x218/0x5a0 do_signal+0x65/0x700 do_notify_resume+0x65/0x80 int_signal+0x12/0x17 The problem lies with the allocation batching code. It will opportunistically allocate kiocbs, and then trim back the list of iocbs when there is not enough room in the completion ring to hold all of the events. In the case above, what happens is that the pruning back of events ends up freeing up the last active request and the context is marked as dead, so it is thus responsible for waking up waiters. Unfortunately, the code does not check for this condition, so we end up with a hung task. Signed-off-by:Jeff Moyer <jmoyer@redhat.com> Reported-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
-
Prashanth Nageshappa authored
register_kprobe() aborts if the address of the new request falls in a prohibited area (such as ftrace pouch, __kprobes annotated functions, non-kernel text addresses, jump label text). We however don't return the right error on this abort, resulting in a silent failure - incorrect adding/reporting of kprobes ('perf probe do_fork+18' or 'perf probe mcount' for instance). In V2 we are incorporating Masami Hiramatsu's feedback. This patch fixes it by returning -EINVAL upon failure. While we are here, rename the label used for exit to be more appropriate. Signed-off-by:Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
Prashanth K Nageshappa <prashanth@linux.vnet.ibm.com> Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jason Baron <jbaron@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Matthew Garrett authored
Since commit 04c6862c ("kmsg_dump: add kmsg_dump() calls to the reboot, halt, poweroff and emergency_restart paths"), kmsg_dump() gets run on normal paths including poweroff and reboot. This is less than ideal given pstore implementations that can only represent single backtraces, since a reboot may overwrite a stored oops before it's been picked up by userspace. In addition, some pstore backends may have low performance and provide a significant delay in reboot as a result. This patch adds a printk.always_kmsg_dump kernel parameter (which can also be changed from userspace). Without it, the code will only be run on failure paths rather than on normal paths. The option can be enabled in environments where there's a desire to attempt to audit whether or not a reboot was cleanly requested or not. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Acked-by:
Seiji Aguchi <seiji.aguchi@hds.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marco Stornelli <marco.stornelli@gmail.com> Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Don Zickus <dzickus@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
MMC fixes from Chris Ball for 3.3: - atmel-mci: oops fix against regression introduced in 3.2 - core: power saving regression fix against 3.3-rc1 - core: suspend/resume fix for UHS-I cards - esdhc-imx: MMC card regression fix against 3.0 - mmci: oops fix for ARM systems with large (64k) pages - MAINTAINERS update for atmel-mci. * tag 'mmc-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Fixup suspend/resume issues for UHS-I cards mmc: mmci: reduce max_blk_count to avoid overflowing max_req_size mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5 mmc: core: fix regression: set default clock gating delay to 0 MAINTAINERS: hand over atmel-mci (sd/mmc interface) mmc: atmel-mci: don't use dma features when using DMA with no chan available
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull from Jiri Kosina: "Please pull to receive updates for HID layer. Nikolai's patch is rather important and should still go in for 3.3, as it's a regression fix for commit b4b583d4." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-input: allow array fields out of range HID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboard
-
Nikolai Kondrashov authored
Allow array field values out of range as per HID 1.11 specification, section 6.2.25: Rather than returning a single bit for each button in the group, an array returns an index in each field that corresponds to the pressed button (like keyboard scan codes). An out-of range value in and array field is considered no controls asserted. Apparently, "and" above is a typo and should be "an". This fixes at least Waltop tablet pen clicks - otherwise BTN_TOUCH is never released. The relevant part of Waltop tablet report descriptors is this: 0x09, 0x42, /* Usage (Tip Switch), */ 0x09, 0x44, /* Usage (Barrel Switch), */ 0x09, 0x46, /* Usage (Tablet Pick), */ 0x15, 0x01, /* Logical Minimum (1), */ 0x25, 0x03, /* Logical Maximum (3), */ 0x75, 0x04, /* Report Size (4), */ 0x95, 0x01, /* Report Count (1), */ 0x80, /* Input, */ This is a regression fix for commit b4b583d4 ("HID: be more strict when ignoring out-of-range fields"). Signed-off-by:
Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
MFD fixes from Samuel Ortiz: "This is the pull request for the MFD fixes for 3.3. We have a few NULL pointer dereferences fixes, an ACPI conflict check fix, and a couple of wm8994 fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Correct readability of WM8994 DC servo 4E register mfd: Initialize tps65912 irq platform data properly mfd: Fix ACPI conflict check mfd: Fix ab8500 error path bug mfd: Test for jack detection when deciding if wm8994 should suspend mfd: Initialize tps65910 irq platform data properly mfd: Fix possible s5m null pointer dereference mfd: wm8350 variable dereferenced before check
-
- 04 Mar, 2012 9 commits
-
-
Linus Torvalds authored
It's only used inside fs/dcache.c, and we're going to play games with it for the word-at-a-time patches. This time we really don't even want to export it, because it really is an internal function to fs/dcache.c, and has been since it was introduced. Having it in that extremely hot header file (it's included in pretty much everything, thanks to <linux/fs.h>) is a disaster for testing different versions, and is utterly pointless. We really should have some kind of header file diet thing, where we figure out which parts of header files are really better off private and only result in more expensive compiles. Signed-off-by: -
Ulf Hansson authored
Even if cards supports 1.8V I/O voltage those should anyway be initialized at 3.3V I/O according to (e)MMC, SD and SDIO specs. Some eMMC and embedded SDIO devices are able to be initialized at 1.8V as well, but it is better to be safe. Do note that initialization in this context means that the card has been completely powered off, otherwise the card will remain at the last I/O voltage level that were negotitiated. Due to the above being taken care of the suspend/resume issues for UHS-I SD-cards has been fixed. Signed-off-by:
Ulf Hansson <ulf.hansson@stericsson.com> Acked-by:
Philip Rakity <prakity@marvell.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Tested-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
Will Deacon authored
On a system with large pages (64k in my case), the following BUG is triggered in MMC core: [ 2.338023] BUG: failure at drivers/mmc/core/core.c:221/mmc_start_request()! [ 2.338102] Kernel panic - not syncing: BUG! [ 2.338155] Call trace: [ 2.338228] [<ffffffc00008635c>] dump_backtrace+0x0/0x120 [ 2.338317] [<ffffffc0003365ec>] dump_stack+0x14/0x1c [ 2.338403] [<ffffffc000336990>] panic+0xbc/0x1f0 [ 2.338498] [<ffffffc00027a494>] mmc_start_request+0x154/0x184 [ 2.338600] [<ffffffc00027abdc>] mmc_start_req+0x110/0x140 [ 2.338701] [<ffffffc00028604c>] mmc_blk_issue_rw_rq+0x7c/0x39c [ 2.338804] [<ffffffc00028652c>] mmc_blk_issue_rq+0x1c0/0x468 [ 2.338905] [<ffffffc000287564>] mmc_queue_thread+0x68/0x118 [ 2.338995] [<ffffffc0000bc308>] kthread+0x84/0x8c This is because of a 64k request with a max_req_size of 64k-1 bytes. The following patch fixes the problem by limiting the max_blk_count such that max_blk_count * max_blk_size == max_req_size. I couldn't pursuade the compiler to emit a shift instead of a div without encoding the shift explicitly. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Sascha Hauer authored
On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION command. This works for SD cards. However, with MMC cards the MMC_SET_BLOCK_COUNT command is used instead, but this needs the same handling. Fix MMC cards by testing for the MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53 board with a Transcend MMC+ card and eMMC. The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this is a regression for these boards introduced in 3.0; it should go to 3.0/3.1/3.2-stable. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Guennadi Liakhovetski authored
A recent commit "mmc: core: Use delayed work in clock gating framework" (597dd9d7) introduced a default 200ms delay before clock gating actually takes place. This means that every time an MMC interface becomes idle it first stays on for 200ms before gating its clock. This leads to increased power consumption and is therefore a clear regression. This patch restores the original behaviour by setting the default delay to 0. Users prioritising throughput over power efficiency can still modify the delay via sysfs. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Nicolas Ferre authored
Modify MAINTAINERS entry for Atmel SD/MMC drivers. I hand the atmel-mci and at91_mci drivers over to Ludovic. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
SCSI fixes from James Bottomley: "There's just a single fix in here: the osd max device number fix." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6Linus Torvalds authored
PARISC fixes from James Bottomley: "This is a set of build fixes to get the cross compiled architecture testbeds building again" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit. [PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional
-
- 03 Mar, 2012 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull from Herbert Xu: "This push fixes a bug in mv_cesa that causes all hash operations that supply data on a final operation to fail." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: mv_cesa - fix final callback not ignoring input data
-
Linus Torvalds authored
Commit 5707c87f "vfs: uninline full_name_hash()" broke the modular build, because it needs exporting now that it isn't inlined any more. Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
- 02 Mar, 2012 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
hhwmon fixes for 3.3-rc6 from Guenter Roeck: These patches are necessary for correct operation and management of F75387. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (f75375s) Catch some attempts to write to r/o registers hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable hwmon: (f75375s) Make pwm*_mode writable for the F75387 hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387
-
git://github.com/schandinat/linux-2.6Linus Torvalds authored
fbdev fixes for 3.3 from Florian Tobias Schandinat It includes: - two fixes for OMAP HDMI - one fix to make new OMAP functions behave as they are supposed to - one Kconfig dependency fix - two fixes for viafb for modesetting on VX900 hardware * tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6: OMAPDSS: APPLY: make ovl_enable/disable synchronous OMAPDSS: panel-dvi: Add Kconfig dependency on I2C viafb: fix IGA1 modesetting on VX900 viafb: select HW scaling on VX900 for IGA2 OMAPDSS: HDMI: hot plug detect fix OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
sound fixes for 3.3-rc6 from Takashi Iwai This contains again regression fixes for various HD-audio and ASoC regarding SSI and dapm shutdown path. In addition, a minor azt3328 fix and the correction of the new jack-notification strings in HD-audio. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Kill hyphenated names ALSA: hda - Add a fake mute feature ALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs ALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3 ALSA: hda/realtek - Fix resume of multiple input sources ASoC: i.MX SSI: Fix DSP_A format. ASoC: dapm: Check for bias level when powering down
-
Linus Torvalds authored
The code in link_path_walk() that finds out the length and the hash of the next path component is some of the hottest code in the kernel. And I have a version of it that does things at the full width of the CPU wordsize at a time, but that means that we *really* want to split it up into a separate helper function. So this re-organizes the code a bit and splits the hashing part into a helper function called "hash_name()". It returns the length of the pathname component, while at the same time computing and writing the hash to the appropriate location. The code generation is slightly changed by this patch, but generally for the better - and the added abstraction actually makes the code easier to read too. And the new interface is well suited for replacing just the "hash_name()" function with alternative implementations. Signed-off-by: -
Linus Torvalds authored
It did some odd things for unclear reasons. As this is one of the functions that gets changed when doing word-at-a-time compares, this is yet another of the "don't change any semantics, but clean things up so that subsequent patches don't get obscured by the cleanups". Signed-off-by: -
Linus Torvalds authored
.. and also use it in lookup_one_len() rather than open-coding it. There aren't any performance-critical users, so inlining it is silly. But it wouldn't matter if it wasn't for the fact that the word-at-a-time dentry name patches want to conditionally replace the function, and uninlining it sets the stage for that. So again, this is a preparatory patch that doesn't change any semantics, and only prepares for a much cleaner and testable word-at-a-time dentry name accessor patch. Signed-off-by: -
Linus Torvalds authored
These don't change any semantics, but they clean up the code a bit and mark some arguments appropriately 'const'. They came up as I was doing the word-at-a-time dcache name accessor code, and cleaning this up now allows me to send out a smaller relevant interesting patch for the experimental stuff. Signed-off-by:
-
