- 03 Apr, 2019 7 commits
-
-
Jason Gunthorpe authored
Based on rdma.git for-rc for dependencies. From Dennis Dalessandro: ==================== Here are some code improvement patches and fixes for less serious bugs to TID RDMA than we sent for RC. ==================== * HFI1 updates: IB/hfi1: Implement CCA for TID RDMA protocol IB/hfi1: Remove WARN_ON when freeing expected receive groups IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE IB/hfi1: Add a function to read next expected psn from hardware flow IB/hfi1: Delay the release of destination mr for TID RDMA WRITE DATA Signed-off-by:Jason Gunthorpe <jgg@mellanox.com>
-
Kaike Wan authored
Currently, FECN handling is not implemented on TID RDMA expected receive packets and therefore CCA can't be turned on when TID RDMA is enabled. This patch adds the CCA support to TID RDMA protocol by: - modifying FECN RSM rule to include kernel receive contexts - For TID_RDMA READ RESP or TID RDMA ACK packet, a CNP will be sent out if the FECN bit is set. For other TID RDMA packets that generate at least one response packet, the BECN bit will be set in the first response packet - Copying expected packet data to destination buffer when FECN bit is set in the TID RDMA READ RESP or TID RDMA WRITE DATA packet. In this case, the expected packet is received as an eager packet - Handling the TID sequence error for subsequent normal expected packets. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Kaike Wan authored
When PSM user receive context is freed, the expected receive groups allocated by the receive context will also been freed. However, if there are still TID entries in use, the receive groups rcd->tid_full_list or rcd->tid_used_list will not be empty, and thus triggering the WARN_ONs in the function hfi1_free_ctxt_rcv_groups(). Even if the two lists may not be empty, the hfi1 driver will free all TID entries and receive groups associated with the receive context to prevent any resource leakage. Since a clean user application exit is not controlled by the hfi1 driver, this patch will remove the WARN_ONs in hfi1_free_ctxt_rcv_groups(). Reviewed-by:
-
Kaike Wan authored
For expected packet receiving, the hfi1 hardware checks the KDETH PSN automatically. However, when sequence error occurs, the hfi1 driver can check the sequence instead until the hardware flow generation is reloaded. TID RDMA READ and WRITE protocols implement similar software checking mechanisms, but with different flags and different local variables to store next expected PSN. Unify the handling by using only one set of flag and local variable for both TID RDMA READ and WRITE protocols. Reviewed-by:
-
Kaike Wan authored
This patch adds a function to read next expected KDETH PSN from hardware flow to simplify the code. Reviewed-by:
-
Kaike Wan authored
The reference of destination memory region is first obtained when TID RDMA WRITE request is first received on the responder side. This reference is released once all TID RDMA WRITE RESP packets are sent to the requester side, even though not all TID RDMA WRITE DATA packets may have been received. This early release will especially be undesired if the software needs to access the destination memory before the last data packet is received. This patch delays the release of the MR until all TID RDMA DATA packets have been received. A helper function to release the reference is also created to simplify the code. Reviewed-by:
-
Leon Romanovsky authored
Conversion from IDR to XArray missed the fact that idr_alloc() returned index as a return value, this index was saved in port variable and used as query index later on. This caused to the following error. BUG: KASAN: use-after-free in cma_check_port+0x86a/0xa20 [rdma_cm] Read of size 8 at addr ffff888069fde998 by task ucmatose/387 CPU: 3 PID: 387 Comm: ucmatose Not tainted 5.1.0-rc2+ #253 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x7c/0xc0 print_address_description+0x6c/0x23c ? cma_check_port+0x86a/0xa20 [rdma_cm] kasan_report.cold.3+0x1c/0x35 ? cma_check_port+0x86a/0xa20 [rdma_cm] ? cma_check_port+0x86a/0xa20 [rdma_cm] cma_check_port+0x86a/0xa20 [rdma_cm] rdma_bind_addr+0x11bc/0x1b00 [rdma_cm] ? find_held_lock+0x33/0x1c0 ? cma_ndev_work_handler+0x180/0x180 [rdma_cm] ? wait_for_completion+0x3d0/0x3d0 ucma_bind+0x120/0x160 [rdma_ucm] ? ucma_resolve_addr+0x1a0/0x1a0 [rdma_ucm] ucma_write+0x1f8/0x2b0 [rdma_ucm] ? ucma_open+0x260/0x260 [rdma_ucm] vfs_write+0x157/0x460 ksys_write+0xb8/0x170 ? __ia32_sys_read+0xb0/0xb0 ? trace_hardirqs_off_caller+0x5b/0x160 ? do_syscall_64+0x18/0x3c0 do_syscall_64+0x95/0x3c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Allocated by task 381: __kasan_kmalloc.constprop.5+0xc1/0xd0 cma_alloc_port+0x4d/0x160 [rdma_cm] rdma_bind_addr+0x14e7/0x1b00 [rdma_cm] ucma_bind+0x120/0x160 [rdma_ucm] ucma_write+0x1f8/0x2b0 [rdma_ucm] vfs_write+0x157/0x460 ksys_write+0xb8/0x170 do_syscall_64+0x95/0x3c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 381: __kasan_slab_free+0x12e/0x180 kfree+0xed/0x290 rdma_destroy_id+0x6b6/0x9e0 [rdma_cm] ucma_close+0x110/0x300 [rdma_ucm] __fput+0x25a/0x740 task_work_run+0x10e/0x190 do_exit+0x85e/0x29e0 do_group_exit+0xf0/0x2e0 get_signal+0x2e0/0x17e0 do_signal+0x94/0x1570 exit_to_usermode_loop+0xfa/0x130 do_syscall_64+0x327/0x3c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: <syzbot+2e3e485d5697ea610460@syzkaller.appspotmail.com> Reported-by:
Ran Rozenstein <ranro@mellanox.com> Fixes: 63826753 ("cma: Convert portspace IDRs to XArray") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
-
- 02 Apr, 2019 1 commit
-
-
Leon Romanovsky authored
port_pd is treated as le32 in declaration and read, fix assignment to be in le32 too. This change fixes the following compilation warnings. drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: warning: incorrect type in assignment (different base types) drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: expected restricted __le32 [usertype] port_pd drivers/infiniband/hw/hns/hns_roce_ah.c:67:24: got restricted __be32 [usertype] Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver") Signed-off-by:
Gal Pressman <galpress@amazon.com> Reviewed-by:
Lijun Ou <ouliun@huawei.com> Signed-off-by:
-
- 01 Apr, 2019 8 commits
-
-
Shamir Rabinovitch authored
Now when ib_udata is passed to all the driver's object create/destroy APIs the ib_udata will carry the ib_ucontext for every user command. There is no need to also pass the ib_ucontext via the functions prototypes. Make ib_udata the only argument psssed. Signed-off-by:
Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by:
-
Shamir Rabinovitch authored
Now that we have the udata passed to all the ib_xxx object destroy APIs and the additional macro 'rdma_udata_to_drv_context' to get the ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally start to remove the dependency of the drivers in the ib_xxx->uobject->context. Signed-off-by:
-
Shamir Rabinovitch authored
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x destroy path as ib_udata. The next patch will use the ib_udata to free the drivers destroy path from the dependency in 'uobject->context' as we already did for the create path. Signed-off-by:
-
Shamir Rabinovitch authored
Pass uverbs_attr_bundle down the uobject destroy path. The next patch will use this to eliminate the dependecy of the drivers in ib_x->uobject pointers. Signed-off-by:
-
Shamir Rabinovitch authored
the Attempt to use the below commit to initialize the ucontext for the uobject destroy path has shown that the below commit is incomplete. Parts were reverted and the ucontext set up in the uverbs_attr_bundle was moved to rdma_lookup_get_uobject which is called from the uobj_get_XXX macros and rdma_alloc_begin_uobject which is called when uobject is created. Fixes: 3d9dfd06 ("IB/uverbs: Add ib_ucontext to uverbs_attr_bundle sent from ioctl and cmd flows") Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Matthew Wilcox authored
Also remove qib_devs_list. Signed-off-by:
-
Matthew Wilcox authored
Also remove hfi1_devs_list. Signed-off-by:
-
- 29 Mar, 2019 7 commits
-
-
Leon Romanovsky authored
There is no need to perform extra comparison after boolean AND. Signed-off-by:
-
Leon Romanovsky authored
Delete structure which is not connected due to removal in commit cited in Fixes line. Fixes: a78e8723 ("RDMA/cma: Remove CM_ID statistics provided by rdma-cm module") Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
Also fully initialise the qp before storing it in the XArray. Signed-off-by:
-
Matthew Wilcox authored
Change the locking to not disable interrupts as the lookup in interrupt context will not see a freed CQ, thanks to the synchronize_irq() call before freeing the CQ. Signed-off-by:
-
- 28 Mar, 2019 17 commits
-
-
Parav Pandit authored
Add netlink command that enables/disables sharing rdma device among multiple net namespaces. Using rdma tool, $rdma sys set netns shared (default mode) When rdma subsystem netns mode is set to shared mode, rdma devices will be accessible in all net namespaces. Using rdma tool, $rdma sys set netns exclusive When rdma subsystem netns mode is set to exclusive mode, devices will be accessible in only one net namespace at any given point of time. If there are any net namespaces other than default init_net exists, while executing this command, it will fail and mode cannot be changed. To change this mode, netlink command is used instead of sysctl, because netlink command allows to auto load a module. Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Parav Pandit authored
Add an interface via netlink command to query whether rdma devices are shared among multiple net namespaces or not. When using RDMAtool, it can be queried as, $rdma system show netns netns shared Signed-off-by:
-
Parav Pandit authored
Extend ib_device_get_by_index() API to check device access for net namespace for serving netlink commands. Also enforce net ns check on dumpit commands which iterate over all registered rdma devices and which don't call ib_device_get_by_index(). Signed-off-by:
-
Parav Pandit authored
Introduce an API rdma_dev_access_netns() to check whether a rdma device can be accessed from the specified net namespace or not. Use rdma_dev_access_netns() while opening character uverbs, umad network device and also check while rdma cm_id binds to rdma device. Signed-off-by:
-
Parav Pandit authored
Add module parameter to change a sharing mode of ib_core early in the boot process. This parameter helps to those systems where modern up to date rdma tool (iproute2) package may not be available during kernel upgrade cycle. Signed-off-by:
-
Parav Pandit authored
Now that sysfs compatibility layer for non init_net exists, add core port attributes such as pkey and gid table to non init_net ns. Signed-off-by:
-
Parav Pandit authored
Implement compatibility layer sysfs entries of ib_core so that non init_net net namespaces can also discover rdma devices. Each non init_net net namespace has ib_core_device created in it. Such ib_core_device sysfs tree resembles rdma devices found in init_net namespace. This allows discovering rdma devices in multiple non init_net net namespaces via sysfs entries and helpful to rdma-core userspace. Signed-off-by:
-
Parav Pandit authored
This is a preparation patch to provide isolation of rdma device in a network namespace. As first step, make rdma device visible only in init net namespace. Subsequent patch will enable rdma device visibility back in multiple net namespaces using compat ib_core_device device/sysfs tree. Given that the IB subsystem depends on net stack, it needs to be initialized after netdev and since it support devices, it needs to be initialized before the device subsystem; therefore, change initcall sequence to fs_initcall, so that when ib_core is compiled in the kernel image, the right init sequence is followed. Signed-off-by:
-
Parav Pandit authored
In order to support sysfs entries in multiple net namespaces for a rdma device, introduce a ib_core_device whose scope is limited to hold core device and per port sysfs related entries. This is preparation patch so that multiple ib_core_devices in each net namespace can be created in subsequent patch who all can share ib_device. (a) Move sysfs specific fields to ib_core_device. (b) Make sysfs and device life cycle related routines to work on ib_core_device. (c) Introduce and use rdma_init_coredev() helper to initialize coredev fields. Signed-off-by: -
Shiraz Saleem authored
The buffer that holds the page DMA addresses is sized off umem->nmap. This can potentially cause out of bound accesses on the PBL array when iterating the umem DMA-mapped SGL. This is because if umem pages are combined, umem->nmap can be much lower than the number of system pages in umem. Use ib_umem_num_pages() to size this buffer. Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Shiraz Saleem authored
The buffer that holds the page DMA addresses is sized off umem->nmap. This can potentially cause out of bound accesses on the PBL array when iterating the umem DMA-mapped SGL. This is because if umem pages are combined, umem->nmap can be much lower than the number of system pages in umem. Use ib_umem_num_pages() to size this buffer. Cc: Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Shiraz Saleem authored
The buffer that holds the page DMA addresses is sized off umem->nmap. This can potentially cause out of bound accesses on the PBL array when iterating the umem DMA-mapped SGL. This is because if umem pages are combined, umem->nmap can be much lower than the number of system pages in umem. Use ib_umem_num_pages() to size this buffer. Signed-off-by:
-
Shiraz Saleem authored
The PBL array that hold the page DMA address is sized off umem->nmap. This can potentially cause out of bound accesses on the PBL array when iterating the umem DMA-mapped SGL. This is because if umem pages are combined, umem->nmap can be much lower than the number of system pages in umem. Use ib_umem_num_pages() to size this array. Cc: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
Selvin Xavier authored
umem->nmap is used while allocating internal buffer for storing page DMA addresses. This causes out of bounds array access while iterating the umem DMA-mapped SGL with umem page combining as umem->nmap can be less than number of system pages in umem. Use ib_umem_num_pages() instead of umem->nmap to size the page array. Add a new structure (bnxt_qplib_sg_info) to pass sglist, npages and nmap. Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
Bart Van Assche authored
This patch avoids that a compiler warning is reported when building with W=1. Reviewed-by:
-
Bart Van Assche authored
Enable format string checking for hfi1_cdbg() and fix the resulting compiler warnings. Signed-off-by:
-
Bart Van Assche authored
Avoid that sparse complains about a missing declaration. Reviewed-by:
-
