Do basic editing & correction to hidraw.rst:
- use "hidraw" consistently except at the beginning of a sentence
- add archive.org URL for signal11.us since the latter seems to be MIA
- use a list for 2 URLs so that they don't run together
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: Alan Ott <alan@signal11.us>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Do basic editing & correction to intel-ish-hid.rst:
- fix grammar, verb tense, punctutation, and word phrasing
- fix spellos
- hyphenate multi-word adjectives
- collapse 2 spaces to one space in the middle of sentences
- use "I2C" instead of lower-case letters (as Linux I2C does)
- change space indentation to tab
- use HID instead of hid consistently
- use a list so that some line items do not run together
- use "a UUID" instead of "an UUID"
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: linux-input@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Do basic editing & correction to hiddev.rst:
- use HID instead of hid consistently
- add hyphenation of multi-word adjectives
- drop a duplicate word
- unhyphenate "a priori"
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Do basic editing & correction to amd-sfh-hid.rst:
- fix punctuation
- use HID instead of hid consistently
- fix grammar, verb tense
- fix Block Diagram heading
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: linux-input@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Do basic editing & correction to hid-alps.rst:
- fix grammar
- fix punctuation spacing
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - AMD SFH (Sensor Fusion Hub) support (Sandeep Singh)

 - increase of maximum HID report size to 16KB in order to support some
   of the modern devices (Dean Camera)

 - control interface support for hidraw (Dean Camera)

 - Sony DS4 power and firmware reporting fixes (Roderick Colenbrander)

 - support for ghlive PS3/WII U dongles (Pascal Giard)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits)
  HID: i2c-hid: add Vero K147 to descriptor override
  HID: ite: Add support for Acer S1002 keyboard-dock
  HID: sony: support for ghlive ps3/wii u dongles
  HID: hidraw: Add additional hidraw input/output report ioctls.
  HID: Increase HID maximum report size to 16KB
  HID: elecom: drop stray comment
  HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube Adapter
  HID: elecom: add support for EX-G M-XGL20DLBK wireless mouse
  HID: elecom: rewrite report based on model specific parameters
  HID: wacom: Constify attribute_groups
  HID: input: Fix fall-through warnings for Clang
  HID: usbhid: Fix fall-through warnings for Clang
  HID: logitech-hidpp: Add hid_device_id for V470 bluetooth mouse
  HID: intel-ish-hid: Remove unnecessary assignment to variable rv
  HID: sony: Workaround for DS4 dongle hotplug kernel crash.
  HID: sony: Don't use fw_version/hw_version for sysfs cleanup.
  HID: sony: Report more accurate DS4 power status.
  SFH: fix error return check for -ERESTARTSYS
  HID: SFH: Add documentation
  HID: hid-input: occasionally report stylus battery even if not changed
  ...

Pull devicetree updates from Rob Herring:

 - Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere

 - Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml

 - Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to
   schemas

 - Drop PicoXcell bindings

 - Drop unused and undocumented 'pnx,timeout' property from LPC32xx

 - Add 'dynamic-power-coefficient' to Mali GPU bindings

 - Make 'make dt_binding_check' not error out on warnings

 - Various minor binding fixes

* tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits)
  dt-bindings: mali-bifrost: Add dynamic-power-coefficient
  dt-bindings: mali-midgard: Add dynamic-power-coefficient
  dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells"
  dt-bindings: Remove PicoXcell bindings
  ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout'
  dt-bindings: mtd: convert "fixed-partitions" to the json-schema
  dt-bindings: vendor-prefixes: Add undocumented bm, gpio-key, and mentor prefixes
  dt-bindings: pci: rcar-pci-ep: Document missing interrupts property
  dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com
  dt-bindings: vendor-prefixes: correct the spelling of TQ-Systems GmbH
  dt-bindings: mfd: fix stm32 timers example
  dt-bindings: trivial-devices: Add delta,q54sj108a2
  dt-bindings:i2c:i2c-gate: txt to yaml conversion
  dt-bindings: add ADP5585/ADP5589 entries to trivial-devices
  dt-bindings: Correct GV11B GPU register sizes
  dt-bindings: vendor-prefixes: Add FII
  dt-bindings: Fix typo on the DesignWare IP reset bindings documentation
  dt-bindings: Fix error in 'make dtbs_check' when using DT_SCHEMA_FILES
  dt-bindings: arm: vt8500: remove redundant white-spaces
  dt-bindings: fsl-imx-drm: fix example compatible string
  ...

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.11 kernel.

  Drivers, drivers and drivers. Not a single core change.

  Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot
  SoCs.

  As part of the modularization attempt, I applied one patch affecting
  the firmware subsystem as a functional (not syntactic/semantic)
  dependency and then it blew up in our face, so I had to revert it,
  bummer. It will come in later, through that subsystem, I guess.

  New drivers:

   - New driver for the Microchip Serial GPIO "SGPIO".

   - Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.

  New subdrivers:

   - Intel Lakefield subdriver.

   - Intel Elkhart Lake subdriver.

   - Intel Alder Lake-S subdriver.

   - Qualcomm MSM8953 subdriver.

   - Qualcomm SDX55 subdriver.

   - Qualcomm SDX55 PMIC subdriver.

   - Ocelot Luton SoC subdriver.

   - Ocelot Serval SoC subdriver.

  Modularization:

   - The Meson driver can now be built as modules.

   - The Qualcomm driver(s) can now be built as modules.

  Incremental improvements:

   - The Intel driver now supports pin configuration for GPIO-related
     configurations.

   - A bunch of Renesas PFC drivers have been augmented with support for
     QSPI pins, groups and functions.

   - Non-critical fixes to the irq handling in the Allwinner Sunxi
     driver"

* tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
  pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()
  pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1()
  dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support
  pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)
  pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  pinctrl: qcom-pmic-gpio: Add support for pmx55
  dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
  pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword
  pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error
  pinctrl: mtk: Fix low level output voltage issue
  pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
  pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]
  pinctrl: pinctrl-microchip-sgpio: Add OF config dependency
  pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
  pinctrl: at91-pio4: add support for fewer lines on last PIO bank
  pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler
  pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON
  pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller
  ...

Pull MTD updates from Miquel Raynal:
 "MTD core:
   - Fix refcounting for unpartitioned MTDs
   - Fix misspelled function parameter 'section'
   - Remove unneeded break
   - cmdline parser: Fix parsing of part-names with colons
   - mtdpart: Fix misdocumented function parameter 'mtd'

  MTD devices:
   - phram:
      - Allow the user to set the erase page size
      - File headers are not good candidates for kernel-doc
   - physmap-bt1-rom: Fix __iomem addrspace removal warning
   - plat-ram: correctly free memory on error path in platram_probe()
   - powernv_flash: Add function names to headers and fix 'dev'
   - docg3: Fix kernel-doc 'bad line' and 'excessive doc' issues

  UBI cleanup fixes:
   - gluebi: Fix misnamed function parameter documentation
   - wl: Fix a couple of kernel-doc issues
   - eba: Fix a couple of misdocumentation issues
   - kapi: Correct documentation for 'ubi_leb_read_sg's 'sgl' parameter
   - Document 'ubi_num' in struct mtd_dev_param

  Generic NAND core ECC management:
   - Add an I/O request tweaking mechanism
   - Entire rework of the software BCH ECC driver, creation of a real
     ECC engine, getting rid of raw NAND structures, migration to more
     generic prototypes, misc fixes and style cleanup. Moved now to the
     Generic NAND layer.
   - Entire rework of the software Hamming ECC driver, creation of a
     real ECC engine, getting rid of raw NAND structures, misc renames,
     comment updates, cleanup, and style fixes. Moved now to the generic
     NAND layer.
   - Necessary plumbing at the NAND level to retrieve generic NAND ECC
     engines (softwares and on-die).
   - Update of the bindings.

  Raw NAND core:
   - Geting rid of the chip->ecc.priv entry.
   - Fix miscellaneous typos in kernel-doc

  Raw NAND controller drivers:
   - Arasan: Document 'anfc_op's 'buf' member
   - AU1550: Ensure the presence of the right includes
   - Brcmnand: Demote non-conformant kernel-doc headers
   - Cafe: Remove superfluous param doc and add another
   - Davinci: Do not use extra dereferencing
   - Diskonchip: Marking unused variables as __always_unused
   - GPMI:
      - Fix the driver only sense CS0 R/B issue
      - Fix the random DMA timeout issue
      - Use a single line for of_device_id
      - Use of_device_get_match_data()
      - Fix reference count leak in gpmi ops
      - Cleanup makefile
      - Fix binding matching of clocks on different SoCs
   - Ingenic: remove redundant get_device() in ingenic_ecc_get()
   - Intel LGM: New NAND controller driver
   - Marvell: Drop useless line
   - Meson:
      - Fix a resource leak in init
      - Fix meson_nfc_dma_buffer_release() arguments
   - mxc:
      - Use device_get_match_data()
      - Use a single line for of_device_id
      - Remove platform data support
   - Omap:
      - Fix a bunch of kernel-doc misdemeanours
      - Finish ELM half populated function header, demote empty ones
   - s3c2410: Add documentation for 2 missing struct members
   - Sunxi: Document 'sunxi_nfc's 'caps' member
   - Qcom:
      - Add support for SDX55
      - Support for IPQ6018 QPIC NAND controller
      - Fix DMA sync on FLASH_STATUS register read
   - Rockchip: New NAND controller driver for RK3308, RK2928 and others
   - Sunxi: Add MDMA support

  ONENAND:
   - bbt: Fix expected kernel-doc formatting
   - Fix some kernel-doc misdemeanours
   - Fix expected kernel-doc formatting
   - Use mtd->oops_panic_write as condition

  SPI-NAND core:
   - Creation of a SPI-NAND on-die ECC engine
   - Move ECC related definitions earlier in the driver
   - Fix typo in comment
   - Fill a default ECC provider/algorithm
   - Remove outdated comment
   - Fix OOB read
   - Allow the case where there is no ECC engine
   - Use the external ECC engine logic

  SPI-NAND chip drivers:
   - Micron:
      - Add support for MT29F2G01AAAED
      - Use more specific names
   - Macronix:
      - Add support for MX35LFxG24AD
      - Add support for MX35LFxGE4AD
   - Toshiba: Demote non-conformant kernel-doc header

  SPI-NOR core:
   - Initial support for stateful Octal DTR mode using volatile settings
   - Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards
   - Support for Cypress Semper flash
   - Support to specify ECC block size of SPI NOR flashes
   - Fixes to avoid clearing of non-volatile Block Protection bits at
     probe
   - hisi-sfc: Demote non-conformant kernel-doc"

* tag 'mtd/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits)
  mtd: spinand: macronix: Add support for MX35LFxG24AD
  mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others
  dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller
  mtd: rawnand: gpmi: Use a single line for of_device_id
  mtd: rawnand: gpmi: Fix the random DMA timeout issue
  mtd: rawnand: gpmi: Fix the driver only sense CS0 R/B issue
  mtd: rawnand: qcom: Add NAND controller support for SDX55
  dt-bindings: qcom_nandc: Add SDX55 QPIC NAND documentation
  mtd: rawnand: mxc: Use a single line for of_device_id
  mtd: rawnand: mxc: Use device_get_match_data()
  mtd: rawnand: meson: Fix a resource leak in init
  mtd: rawnand: gpmi: Use of_device_get_match_data()
  mtd: rawnand: Add NAND controller support on Intel LGM SoC
  dt-bindings: mtd: Add Nand Flash Controller support for Intel LGM SoC
  mtd: spinand: micron: Add support for MT29F2G01AAAED
  mtd: spinand: micron: Use more specific names
  mtd: rawnand: gpmi: fix reference count leak in gpmi ops
  dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs
  mtd: spinand: macronix: Add support for MX35LFxGE4AD
  mtd: plat-ram: correctly free memory on error path in platram_probe()
  ...

Pull LED updates from Pavel Machek:
 "Small cleanups/fixes mostly thanks to Marek, nothing major made it in
  this time"

* tag 'leds-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: turris-omnia: check for LED_COLOR_ID_RGB instead LED_COLOR_ID_MULTI
  leds: turris-omnia: fix checkpatch warning
  leds: turris-omnia: wrap to 80 columns
  leds: turris-omnia: use constants instead of macros for color command
  dt-bindings: leds: Convert pwm to yaml
  leds: lp50xx: Fix an error handling path in 'lp50xx_probe_dt()'
  leds: netxbig: add missing put_device() call in netxbig_leds_get_of_pdata()
  Documentation: leds: remove invalidated information

Pull IPMI updates from Corey Minyard:
 "Some very minor changes.

  Nothing functional, just little syntax cleanups and a RCU warning
  suppression"

* tag 'for-linus-5.11-1' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: convert comma to semicolon
  ipmi: msghandler: Suppress suspicious RCU usage warning
  ipmi/watchdog: replace atomic_add() and atomic_sub()
  char: ipmi: remove unneeded break

Pull backlight update from Lee Jones:
 "Careful, it's a big one!

   - Fix pwm_bl driver interpolation issues by switching to a linear
     algorithm"

* tag 'backlight-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Fix interpolation

Pull MFD updates from Lee Jones:
 "New Drivers
   - Add support for Intel's Platform Monitoring Technology (PMT)

  New Device Support:
   - Add support for PM660/PM660L to QCom SPMI PMIC
   - Add support for lots of new devices to Kontron Core

  New Functionality:
   - Provide syscon_regmap_lookup_by_phandle_optional() to SysCon API

  Fix-ups:
   - Constify; da9xxx-core; intel_*, tps65xxx, wm8xxx-core, lp8788,
     stmpe, sun4i-gpadc, 88pm800, hi655x-pmic, ioc3, etc
   - Remove superfluous code; madera, tps65910
   - Use raw APIs (rid abstractions); tps65911-comparator, tps65910
   - Whitespace/formatting fix-ups; tps65910
   - Device Tree changes/updates; bd71837-pmic, syscon
   - Use helpers/APIs (no hand rolling); altera-sysmgr
   - Mark of_match tables as __maybe_unused; twl6030-irq
   - Fix spelling; si476x-core

  Bug Fixes:
   - Reset on resume to ensure known state; madera-core
   - Correct ordering issues; madera-core, tps65910, kempld-core
   - Remove erroneous passing of of_compatible strings; at91-usart
   - Fix potential I2C adaptor leak; htc-i2cpld
   - Correct errorneous defines; rt5033-private
   - Resolve Kconfig issues; MFD_SL28CPLD, MFD_OMAP_USB_HOST
   - Fix dev_err_probe() handling; stmfx
   - Repair interrupt regression; motorola-cpcap
   - Allow ACPI matching of DT tables; bcm590xx, da9xx, ene-kb3930,
     fsl-imx25-tsadc, max77650, mt6397-core, rt5033, stmfx, max77686,
     sun4i-gpadc, wm8994-core, axp20x-i2c"

[ The PMT updates already came in through the x86 platform tree ]

* tag 'mfd-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (48 commits)
  mfd: kempld-core: Add support for additional devices
  mfd: si476x-core.h: Fix "regulator" spelling in comment
  mfd: twl6030: Mark of_device_id table as maybe unused
  mfd: axp20x: Skip of_device_id table when !CONFIG_OF
  mfd: wm8994: Drop of_match_ptr from of_device_id table
  mfd: sun4i: Drop of_match_ptr from of_device_id table
  mfd: max77686: Drop of_match_ptr from of_device_id table
  mfd: stmfx: Drop of_match_ptr from of_device_id table
  mfd: rt5033: Drop of_match_ptr from of_device_id table
  mfd: mt6397: Drop of_match_ptr from of_device_id table
  mfd: max77650: Drop of_match_ptr from of_device_id table
  mfd: fsl-imx25: Drop of_match_ptr from of_device_id table
  mfd: ene-kb3930: Drop of_match_ptr from of_device_id table
  mfd: da9150: Drop of_match_ptr from of_device_id table
  mfd: da9063: Drop of_match_ptr from of_device_id table
  mfd: da9062: Drop of_match_ptr from of_device_id table
  mfd: da9055: Drop of_match_ptr from of_device_id table
  mfd: bcm590xx: Drop of_match_ptr from of_device_id table
  mfd: omap-usb: Depend on COMMON_CLK to fix compile tests
  mfd: kempld-core: Check for DMI definition before ACPI
  ...

Pull memblock updates from Mike Rapoport:
 "memblock debug enhancements.

  Improve tracking of early memory allocations when memblock debug is
  enabled:

   - Add memblock_dbg() to memblock_phys_alloc_range() to get details
     about its usage

   - Make memblock allocator wrappers actually inline to track their
     callers in memblock debug messages"

* tag 'memblock-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  mm: memblock: drop __init from memblock functions to make it inline
  mm: memblock: add more debug logs

We need the bits of _TIF_WORK_MASK to be contiguous in order to to use
this as an immediate argument to an AND instruction in entry.S.

We happened to change these bits in commits:

  b5a5a01d ("arm64: uaccess: remove addr_limit_user_check()")
  192caabd ("arm64: add support for TIF_NOTIFY_SIGNAL")

which each worked in isolation, but the merge resolution in commit:

  005b2a9d ("Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block")

happened to make the bits non-contiguous.

Fix this by moving TIF_NOTIFY_SIGNAL to be bit 6, which is contiguous
with the rest of _TIF_WORK_MASK.

Otherwise, we'll get a build-time failure as below:

   arch/arm64/kernel/entry.S: Assembler messages:
   arch/arm64/kernel/entry.S:733: Error: immediate out of range at operand 3 -- `and x2,x19,#((1<<1)|(1<<0)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<7))'
   scripts/Makefile.build:360: recipe for target 'arch/arm64/kernel/entry.o' failed

Fixes: 005b2a9d ("Merge tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull IOMMU updates from Will Deacon:
 "There's a good mixture of improvements to the core code and driver
  changes across the board.

  One thing worth pointing out is that this includes a quirk to work
  around behaviour in the i915 driver (see 65f746e8 ("iommu: Add
  quirk for Intel graphic devices in map_sg")), which otherwise
  interacts badly with the conversion of the intel IOMMU driver over to
  the DMA-IOMMU APU but has being fixed properly in the DRM tree.

  We'll revert the quirk later this cycle once we've confirmed that
  things don't fall apart without it.

  Summary:

   - IOVA allocation optimisations and removal of unused code

   - Introduction of DOMAIN_ATTR_IO_PGTABLE_CFG for parameterising the
     page-table of an IOMMU domain

   - Support for changing the default domain type in sysfs

   - Optimisation to the way in which identity-mapped regions are
     created

   - Driver updates:
       * Arm SMMU updates, including continued work on Shared Virtual
         Memory
       * Tegra SMMU updates, including support for PCI devices
       * Intel VT-D updates, including conversion to the IOMMU-DMA API

   - Cleanup, kerneldoc and minor refactoring"

* tag 'iommu-updates-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (50 commits)
  iommu/amd: Add sanity check for interrupt remapping table length macros
  dma-iommu: remove __iommu_dma_mmap
  iommu/io-pgtable: Remove tlb_flush_leaf
  iommu: Stop exporting free_iova_mem()
  iommu: Stop exporting alloc_iova_mem()
  iommu: Delete split_and_remove_iova()
  iommu/io-pgtable-arm: Remove unused 'level' parameter from iopte_type() macro
  iommu: Defer the early return in arm_(v7s/lpae)_map
  iommu: Improve the performance for direct_mapping
  iommu: avoid taking iova_rbtree_lock twice
  iommu/vt-d: Avoid GFP_ATOMIC where it is not needed
  iommu/vt-d: Remove set but not used variable
  iommu: return error code when it can't get group
  iommu: Fix htmldocs warnings in sysfs-kernel-iommu_groups
  iommu: arm-smmu-impl: Add a space before open parenthesis
  iommu: arm-smmu-impl: Use table to list QCOM implementations
  iommu/arm-smmu: Move non-strict mode to use io_pgtable_domain_attr
  iommu/arm-smmu: Add support for pagetable config domain attribute
  iommu: Document usage of "/sys/kernel/iommu_groups/<grp_id>/type" file
  iommu: Take lock before reading iommu group default domain type
  ...

Merge branch 'stable/for-linus-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

Pull swiotlb update from Konrad Rzeszutek Wilk:
 "A generic (but for right now engaged only with AMD SEV) mechanism to
  adjust a larger size SWIOTLB based on the total memory of the SEV
  guests which right now require the bounce buffer for interacting with
  the outside world.

  Normal knobs (swiotlb=XYZ) still work"

* 'stable/for-linus-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  x86,swiotlb: Adjust SWIOTLB bounce buffer size for SEV guests

Pull rdma updates from Jason Gunthorpe:
 "A smaller set of patches, nothing stands out as being particularly
  major this cycle. The biggest item would be the new HIP09 HW support
  from HNS, otherwise it was pretty quiet for new work here:

   - Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
     cxgb4, mlx4 and mlx5

   - Bug fixes and polishing for the new rts ULP

   - Cleanup of uverbs checking for allowed driver operations

   - Use sysfs_emit all over the place

   - Lots of bug fixes and clarity improvements for hns

   - hip09 support for hns

   - NDR and 50/100Gb signaling rates

   - Remove dma_virt_ops and go back to using the IB DMA wrappers

   - mlx5 optimizations for contiguous DMA regions"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
  RDMA/cma: Don't overwrite sgid_attr after device is released
  RDMA/mlx5: Fix MR cache memory leak
  RDMA/rxe: Use acquire/release for memory ordering
  RDMA/hns: Simplify AEQE process for different types of queue
  RDMA/hns: Fix inaccurate prints
  RDMA/hns: Fix incorrect symbol types
  RDMA/hns: Clear redundant variable initialization
  RDMA/hns: Fix coding style issues
  RDMA/hns: Remove unnecessary access right set during INIT2INIT
  RDMA/hns: WARN_ON if get a reserved sl from users
  RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
  RDMA/hns: Do shift on traffic class when using RoCEv2
  RDMA/hns: Normalization the judgment of some features
  RDMA/hns: Limit the length of data copied between kernel and userspace
  RDMA/mlx4: Remove bogus dev_base_lock usage
  RDMA/uverbs: Fix incorrect variable type
  RDMA/core: Do not indicate device ready when device enablement fails
  RDMA/core: Clean up cq pool mechanism
  RDMA/core: Update kernel documentation for ib_create_named_qp()
  MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
  ...

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
  target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
  power management rework and a load of assorted minor updates.

  There are a few core updates (formatting fixes being the big one) but
  nothing major this cycle"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: mpt3sas: Update driver version to 36.100.00.00
  scsi: mpt3sas: Handle trigger page after firmware update
  scsi: mpt3sas: Add persistent MPI trigger page
  scsi: mpt3sas: Add persistent SCSI sense trigger page
  scsi: mpt3sas: Add persistent Event trigger page
  scsi: mpt3sas: Add persistent Master trigger page
  scsi: mpt3sas: Add persistent trigger pages support
  scsi: mpt3sas: Sync time periodically between driver and firmware
  scsi: qla2xxx: Update version to 10.02.00.104-k
  scsi: qla2xxx: Fix device loss on 4G and older HBAs
  scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
  scsi: qla2xxx: Fix the call trace for flush workqueue
  scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
  scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
  scsi: qla2xxx: Fix N2N and NVMe connect retry failure
  scsi: qla2xxx: Fix FW initialization error on big endian machines
  scsi: qla2xxx: Fix crash during driver load on big endian machines
  scsi: qla2xxx: Fix compilation issue in PPC systems
  scsi: qla2xxx: Don't check for fw_started while posting NVMe command
  scsi: qla2xxx: Tear down session if FW say it is down
  ...

Pull block driver updates from Jens Axboe:
 "Nothing major in here:

   - NVMe pull request from Christoph:
        - nvmet passthrough improvements (Chaitanya Kulkarni)
        - fcloop error injection support (James Smart)
        - read-only support for zoned namespaces without Zone Append
          (Javier González)
        - improve some error message (Minwoo Im)
        - reject I/O to offline fabrics namespaces (Victor Gladkov)
        - PCI queue allocation cleanups (Niklas Schnelle)
        - remove an unused allocation in nvmet (Amit Engel)
        - a Kconfig spelling fix (Colin Ian King)
        - nvme_req_qid simplication (Baolin Wang)

   - MD pull request from Song:
        - Fix race condition in md_ioctl() (Dae R. Jeong)
        - Initialize read_slot properly for raid10 (Kevin Vigor)
        - Code cleanup (Pankaj Gupta)
        - md-cluster resync/reshape fix (Zhao Heming)

   - Move null_blk into its own directory (Damien Le Moal)

   - null_blk zone and discard improvements (Damien Le Moal)

   - bcache race fix (Dongsheng Yang)

   - Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
     Lutz Pogrell, Md Haris Iqbal)

   - lightnvm NULL pointer deref fix (tangzhenhao)

   - sr in_interrupt() removal (Sebastian Andrzej Siewior)

   - FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
     Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
     as it made it easier for them to funnel the feature through the
     block driver tree.

   - Follow up fixes (Colin Ian King)"

* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
  block: drop dead assignments in loop_init()
  sr: Remove in_interrupt() usage in sr_init_command().
  sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
  cdrom: Reset sector_size back it is not 2048.
  drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
  null_blk: Move driver into its own directory
  null_blk: Allow controlling max_hw_sectors limit
  null_blk: discard zones on reset
  null_blk: cleanup discard handling
  null_blk: Improve implicit zone close
  null_blk: improve zone locking
  block: Align max_hw_sectors to logical blocksize
  null_blk: Fail zone append to conventional zones
  null_blk: Fix zone size initialization
  bcache: fix race between setting bdev state to none and new write request direct to backing
  block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
  block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
  block/rnbd: call kobject_put in the failure path
  Documentation/ABI/rnbd-srv: add document for force_close
  block/rnbd-srv: close a mapped device from server side.
  ...

Pull block updates from Jens Axboe:
 "Another series of killing more code than what is being added, again
  thanks to Christoph's relentless cleanups and tech debt tackling.

  This contains:

   - blk-iocost improvements (Baolin Wang)

   - part0 iostat fix (Jeffle Xu)

   - Disable iopoll for split bios (Jeffle Xu)

   - block tracepoint cleanups (Christoph Hellwig)

   - Merging of struct block_device and hd_struct (Christoph Hellwig)

   - Rework/cleanup of how block device sizes are updated (Christoph
     Hellwig)

   - Simplification of gendisk lookup and removal of block device
     aliasing (Christoph Hellwig)

   - Block device ioctl cleanups (Christoph Hellwig)

   - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)

   - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)

   - sbitmap improvements (Pavel Begunkov)

   - Hybrid polling fix (Pavel Begunkov)

   - bvec iteration improvements (Pavel Begunkov)

   - Zone revalidation fixes (Damien Le Moal)

   - blk-throttle limit fix (Yu Kuai)

   - Various little fixes"

* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
  blk-mq: fix msec comment from micro to milli seconds
  blk-mq: update arg in comment of blk_mq_map_queue
  blk-mq: add helper allocating tagset->tags
  Revert "block: Fix a lockdep complaint triggered by request queue flushing"
  nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
  blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
  block: disable iopoll for split bio
  block: Improve blk_revalidate_disk_zones() checks
  sbitmap: simplify wrap check
  sbitmap: replace CAS with atomic and
  sbitmap: remove swap_lock
  sbitmap: optimise sbitmap_deferred_clear()
  blk-mq: skip hybrid polling if iopoll doesn't spin
  blk-iocost: Factor out the base vrate change into a separate function
  blk-iocost: Factor out the active iocgs' state check into a separate function
  blk-iocost: Move the usage ratio calculation to the correct place
  blk-iocost: Remove unnecessary advance declaration
  blk-iocost: Fix some typos in comments
  blktrace: fix up a kerneldoc comment
  block: remove the request_queue to argument request based tracepoints
  ...

Pull io_uring updates from Jens Axboe:
 "Fairly light set of changes this time around, and mostly some bits
  that were pushed out to 5.11 instead of 5.10, fixes/cleanups, and a
  few features. In particular:

   - Cleanups around iovec import (David Laight, Pavel)

   - Add timeout support for io_uring_enter(2), which enables us to
     clean up liburing and avoid a timeout sqe submission in the
     completion path.

     The big win here is that it allows setups that split SQ and CQ
     handling into separate threads to avoid locking, as the CQ side
     will no longer submit when timeouts are needed when waiting for
     events (Hao Xu)

   - Add support for socket shutdown, and renameat/unlinkat.

   - SQPOLL cleanups and improvements (Xiaoguang Wang)

   - Allow SQPOLL setups for CAP_SYS_NICE, and enable regular
     (non-fixed) files to be used.

   - Cancelation improvements (Pavel)

   - Fixed file reference improvements (Pavel)

   - IOPOLL related race fixes (Pavel)

   - Lots of other little fixes and cleanups (mostly Pavel)"

* tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block: (43 commits)
  io_uring: fix io_cqring_events()'s noflush
  io_uring: fix racy IOPOLL flush overflow
  io_uring: fix racy IOPOLL completions
  io_uring: always let io_iopoll_complete() complete polled io
  io_uring: add timeout update
  io_uring: restructure io_timeout_cancel()
  io_uring: fix files cancellation
  io_uring: use bottom half safe lock for fixed file data
  io_uring: fix miscounting ios_left
  io_uring: change submit file state invariant
  io_uring: check kthread stopped flag when sq thread is unparked
  io_uring: share fixed_file_refs b/w multiple rsrcs
  io_uring: replace inflight_wait with tctx->wait
  io_uring: don't take fs for recvmsg/sendmsg
  io_uring: only wake up sq thread while current task is in io worker context
  io_uring: don't acquire uring_lock twice
  io_uring: initialize 'timeout' properly in io_sq_thread()
  io_uring: refactor io_sq_thread() handling
  io_uring: always batch cancel in *cancel_files()
  io_uring: pass files into kill timeouts/poll
  ...

Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
 "This sits on top of of the core entry/exit and x86 entry branch from
  the tip tree, which contains the generic and x86 parts of this work.

  Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.

  With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
  signal.c, and also remove a deadlock work-around in io_uring around
  knowing that signal based task_work waking is invoked with the sighand
  wait queue head lock.

  The motivation for this work is to decouple signal notify based
  task_work, of which io_uring is a heavy user of, from sighand. The
  sighand lock becomes a huge contention point, particularly for
  threaded workloads where it's shared between threads. Even outside of
  threaded applications it's slower than it needs to be.

  Roman Gershman <romger@amazon.com> reported that his networked
  workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
  after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
  spent hammering on the sighand lock, showing 57% of the CPU time there
  [1].

  There are further cleanups possible on top of this. One example is
  TIF_PATCH_PENDING, where a patch already exists to use
  TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
  consolidation, but the work stands on its own as well"

[1] https://github.com/axboe/liburing/issues/215

* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
  io_uring: remove 'twa_signal_ok' deadlock work-around
  kernel: remove checking for TIF_NOTIFY_SIGNAL
  signal: kill JOBCTL_TASK_WORK
  io_uring: JOBCTL_TASK_WORK is no longer used by task_work
  task_work: remove legacy TWA_SIGNAL path
  sparc: add support for TIF_NOTIFY_SIGNAL
  riscv: add support for TIF_NOTIFY_SIGNAL
  nds32: add support for TIF_NOTIFY_SIGNAL
  ia64: add support for TIF_NOTIFY_SIGNAL
  h8300: add support for TIF_NOTIFY_SIGNAL
  c6x: add support for TIF_NOTIFY_SIGNAL
  alpha: add support for TIF_NOTIFY_SIGNAL
  xtensa: add support for TIF_NOTIFY_SIGNAL
  arm: add support for TIF_NOTIFY_SIGNAL
  microblaze: add support for TIF_NOTIFY_SIGNAL
  hexagon: add support for TIF_NOTIFY_SIGNAL
  csky: add support for TIF_NOTIFY_SIGNAL
  openrisc: add support for TIF_NOTIFY_SIGNAL
  sh: add support for TIF_NOTIFY_SIGNAL
  um: add support for TIF_NOTIFY_SIGNAL
  ...

Pull parisc updates from Helge Deller:
 "A change to increase the default maximum stack size on parisc to 100MB
  and the ability to further increase the stack hard limit size at
  runtime with ulimit for newly started processes.

  The other patches fix compile warnings, utilize the Kbuild logic and
  cleanups the parisc arch code"

* 'parisc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: pci-dma: fix warning unused-function
  parisc/uapi: Use Kbuild logic to provide <asm/types.h>
  parisc: Make user stack size configurable
  parisc: Use _TIF_USER_WORK_MASK in entry.S
  parisc: Drop loops_per_jiffy from per_cpu struct

Pull MIPS updates from Thomas Bogendoerfer:

 - enable GCOV

 - rework setup of protection map

 - add support for more MSCC platforms

 - add sysfs boardinfo for Loongson64

 - enable KASLR for Loogson64

 - add reset controller for BCM63xx

 - cleanups and fixes

* tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (70 commits)
  mips: fix Section mismatch in reference
  MAINTAINERS: Add linux-mips mailing list to JZ47xx entries
  MAINTAINERS: Remove JZ4780 DMA driver entry
  MAINTAINERS: chenhc@lemote.com -> chenhuacai@kernel.org
  MIPS: Octeon: irq: Alloc desc before configuring IRQ
  MIPS: mm: Add back define for PAGE_SHARED
  MIPS: Select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL to enable sysfs memblock debug
  mips: lib: uncached: fix non-standard usage of variable 'sp'
  MIPS: DTS: img: Fix schema warnings for pwm-leds
  MIPS: KASLR: Avoid endless loop in sync_icache if synci_step is zero
  MIPS: Move memblock_dump_all() to the end of setup_arch()
  MIPS: SMP-CPS: Add support for irq migration when CPU offline
  MIPS: OCTEON: Don't add kernel sections into memblock allocator
  MIPS: Don't round up kernel sections size for memblock_add()
  MIPS: Enable GCOV
  MIPS: configs: drop unused BACKLIGHT_GENERIC option
  MIPS: Loongson64: Fix up reserving kernel memory range
  MIPS: mm: Remove unused is_aligned_hugepage_range
  MIPS: No need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable()
  mips: cdmm: fix use-after-free in mips_cdmm_bus_discover
  ...

Pull microblaze updates from Michal Simek:
 "The biggest change is to remove support for noMMU configuration.

  FPGAs are bigger so people use Microblaze with MMU for a lot of years
  and there is likely no user of this code anymore. No one is updating
  libraries for this configuration either.

   - Remove noMMU support

   - Add support for TIF_NOTIFY_SIGNAL

   - Small header fix"

* tag 'microblaze-v5.11' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove noMMU code
  microblaze: add support for TIF_NOTIFY_SIGNAL
  microblaze: Replace <linux/clk-provider.h> by <linux/of_clk.h>

Pull xen updates from Juergen Gross:
 "Fixes for security issues just having been disclosed:

   - a five patch series for fixing of XSA-349 (DoS via resource
     depletion in Xen dom0)

   - a patch fixing XSA-350 (access of stale pointer in a Xen dom0)"

* tag 'for-linus-5.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen-blkback: set ring->xenblkd to NULL after kthread_stop()
  xenbus/xenbus_backend: Disallow pending watch messages
  xen/xenbus: Count pending messages for each watch
  xen/xenbus/xen_bus_type: Support will_handle watch callback
  xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()
  xen/xenbus: Allow watches discard events before queueing

Merge tag 'hyperv-next-signed-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V updates from Wei Liu:

 - harden VMBus (Andres Beltran)

 - clean up VMBus driver (Matheus Castello)

 - fix hv_balloon reporting (Vitaly Kuznetsov)

 - fix a potential OOB issue (Andrea Parri)

 - remove an obsolete TODO item (Stefan Eschenbacher)

* tag 'hyperv-next-signed-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hv_balloon: do adjust_managed_page_count() when ballooning/un-ballooning
  hv_balloon: simplify math in alloc_balloon_pages()
  drivers/hv: remove obsolete TODO and fix misleading typo in comment
  drivers: hv: vmbus: Fix checkpatch SPLIT_STRING
  hv_netvsc: Validate number of allocated sub-channels
  drivers: hv: vmbus: Fix call msleep using < 20ms
  drivers: hv: vmbus: Fix checkpatch LINE_SPACING
  drivers: hv: vmbus: Replace symbolic permissions by octal permissions
  drivers: hv: Fix hyperv_record_panic_msg path on comment
  hv_netvsc: Use vmbus_requestor to generate transaction IDs for VMBus hardening
  scsi: storvsc: Use vmbus_requestor to generate transaction IDs for VMBus hardening
  Drivers: hv: vmbus: Add vmbus_requestor data structure for VMBus hardening

Pull seccomp updates from Kees Cook:
 "The major change here is finally gaining seccomp constant-action
  bitmaps, which internally reduces the seccomp overhead for many
  real-world syscall filters to O(1), as discussed at Plumbers this
  year.

   - Improve seccomp performance via constant-action bitmaps (YiFei Zhu
     & Kees Cook)

   - Fix bogus __user annotations (Jann Horn)

   - Add missed CONFIG for improved selftest coverage (Mickaël Salaün)"

* tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests/seccomp: Update kernel config
  seccomp: Remove bogus __user annotations
  seccomp/cache: Report cache data through /proc/pid/seccomp_cache
  xtensa: Enable seccomp architecture tracking
  sh: Enable seccomp architecture tracking
  s390: Enable seccomp architecture tracking
  riscv: Enable seccomp architecture tracking
  powerpc: Enable seccomp architecture tracking
  parisc: Enable seccomp architecture tracking
  csky: Enable seccomp architecture tracking
  arm: Enable seccomp architecture tracking
  arm64: Enable seccomp architecture tracking
  selftests/seccomp: Compare bitmap vs filter overhead
  x86: Enable seccomp architecture tracking
  seccomp/cache: Add "emulator" to check if filter is constant allow
  seccomp/cache: Lookup syscall allowlist bitmap for fast path

Pull pstore updates from Kees Cook:

 - Clean up unused but exposed API (Christoph Hellwig)

 - Provide KCONFIG for default size of kmsg buffer (Vasile-Laurentiu
   Stanimir)

* tag 'pstore-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Move kmsg_bytes default into Kconfig
  pstore/blk: remove {un,}register_pstore_blk
  pstore/blk: update the command line example
  pstore/zone: cap the maximum device size

Pull gcc-plugins updates from Kees Cook:

 - Clean up gcc plugin builds now that GCC must be 4.9+ (Masahiro
   Yamada)

 - Update MAINTAINERS (Kees Cook)

* tag 'gcc-plugins-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  MAINTAINERS: Drop inactive gcc-plugins maintainer
  gcc-plugins: simplify GCC plugin-dev capability test
  gcc-plugins: remove code for GCC versions older than 4.9

Pull smack updates from Casey Schaufler:
 "There are no functional changes. Just one minor code clean-up and a
  set of corrections in function header comments"

* tag 'Smack-for-5.11' of git://github.com/cschaufler/smack-next:
  security/smack: remove unused varible 'rc'
  Smack: fix kernel-doc interface on functions

Pull integrity subsystem updates from Mimi Zohar:
 "Just three patches here. Other integrity changes are being upstreamed
  via EFI (defines a common EFI secure and trusted boot IMA policy) and
  BPF LSM (exporting the IMA file cache hash info based on inode).

  The three patches included here:

   - bug fix: fail calculating the file hash, when a file not opened for
     read and the attempt to re-open it for read fails.

   - defer processing the "ima_appraise" boot command line option to
     avoid enabling different modes (e.g. fix, log) to when the secure
     boot flag is available on arm.

   - defines "ima-buf" as the default IMA buffer measurement template in
     preparation for the builtin integrity "critical data" policy"

* tag 'integrity-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Don't modify file descriptor mode on the fly
  ima: select ima-buf template for buffer measurement
  ima: defer arch_ima_get_secureboot() call to IMA init time

Pull selinux updates from Paul Moore:
 "While we have a small number of SELinux patches for v5.11, there are a
  few changes worth highlighting:

   - Change the LSM network hooks to pass flowi_common structs instead
     of the parent flowi struct as the LSMs do not currently need the
     full flowi struct and they do not have enough information to use it
     safely (missing information on the address family).

     This patch was discussed both with Herbert Xu (representing team
     netdev) and James Morris (representing team
     LSMs-other-than-SELinux).

   - Fix how we handle errors in inode_doinit_with_dentry() so that we
     attempt to properly label the inode on following lookups instead of
     continuing to treat it as unlabeled.

   - Tweak the kernel logic around allowx, auditallowx, and dontauditx
     SELinux policy statements such that the auditx/dontauditx are
     effective even without the allowx statement.

  Everything passes our test suite"

* tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
  selinux: Fix fall-through warnings for Clang
  selinux: drop super_block backpointer from superblock_security_struct
  selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
  selinux: allow dontauditx and auditallowx rules to take effect without allowx
  selinux: fix error initialization in inode_doinit_with_dentry()

Pull audit updates from Paul Moore:
 "A small set of audit patches for v5.11 with four patches in total and
  only one of any real significance.

  Richard's patch to trigger accompanying records causes the kernel to
  emit additional related records when an audit event occurs; helping
  provide some much needed context to events in the audit log. It is
  also worth mentioning that this is a revised patch based on an earlier
  attempt that had to be reverted in the v5.8 time frame.

  Everything passes our test suite, and with no problems reported please
  merge this for v5.11"

* tag 'audit-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: replace atomic_add_return()
  audit: fix macros warnings
  audit: trigger accompanying records when no rules present
  audit: fix a kernel-doc markup

Pull printk updates from Petr Mladek:

 - Finally allow parallel writes and reads into/from the lockless
   ringbuffer. But it is not a complete solution. Readers are still
   serialized against each other. And nested writes are still prevented
   by printk_safe per-CPU buffers.

 - Use ttynull as the ultimate fallback for /dev/console.

 - Officially allow disabling console output by using console="" or
   console=null

 - A few code cleanups

* tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: remove logbuf_lock writer-protection of ringbuffer
  printk: inline log_output(),log_store() in vprintk_store()
  printk: remove obsolete dead assignment
  printk/console: Allow to disable console output by using console="" or console=null
  init/console: Use ttynull as a fallback when there is no console
  printk: ringbuffer: Reference text_data_ring directly in callees.

SPI NOR core changes:

- Initial support for stateful Octal DTR mode using volatile settings
- Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards
- Support for Cypress Semper flash
- Support to specify ECC block size of SPI NOR flashes
- Fixes to avoid clearing of non-volatile Block Protection bits at probe

Generic NAND core:
* ECC management:
  - Add an I/O request tweaking mechanism
  - Entire rework of the software BCH ECC driver, creation of a real
    ECC engine, getting rid of raw NAND structures, migration to more
    generic prototypes, misc fixes and style cleanup. Moved now to the
    Generic NAND layer.
  - Entire rework of the software Hamming ECC driver, creation of a
    real ECC engine, getting rid of raw NAND structures, misc renames,
    comment updates, cleanup, and style fixes. Moved now to the
    generic NAND layer.
  - Necessary plumbing at the NAND level to retrieve generic NAND ECC
    engines (softwares and on-die).
  - Update of the bindings.

Raw NAND core:
* Geting rid of the chip->ecc.priv entry.
* Fix miscellaneous typos in kernel-doc

Raw NAND controller drivers:
* AU1550: Ensure the presence of the right includes
* Davinci: Do not use extra dereferencing
* GPMI:
  - Fix the driver only sense CS0 R/B issue
  - Fix the random DMA timeout issue
  - Use a single line for of_device_id
  - Use of_device_get_match_data()
  - Fix reference count leak in gpmi ops
  - Cleanup makefile
  - Fix binding matching of clocks on different SoCs
* Ingenic: remove redundant get_device() in ingenic_ecc_get()
* Intel LGM: New NAND controller driver
* Marvell: Drop useless line
* Meson:
  - Fix a resource leak in init
  - Fix meson_nfc_dma_buffer_release() arguments
* mxc:
  - Use device_get_match_data()
  - Use a single line for of_device_id
  - Remove platform data support
* Qcom:
  - Add support for SDX55
  - Support for IPQ6018 QPIC NAND controller
  - Fix DMA sync on FLASH_STATUS register read
* Rockchip: New NAND controller driver for RK3308, RK2928 and others
* Sunxi: Add MDMA support

SPI-NAND core:
* Creation of a SPI-NAND on-die ECC engine
* Move ECC related definitions earlier in the driver
* Fix typo in comment
* Fill a default ECC provider/algorithm
* Remove outdated comment
* Fix OOB read
* Allow the case where there is no ECC engine
* Use the external ECC engine logic

SPI-NAND chip drivers:
* Micron:
  - Add support for MT29F2G01AAAED
  - Use more specific names
* Macronix:
  - Add support for MX35LFxG24AD
  - Add support for MX35LFxGE4AD

Others:
* onenand: Use mtd->oops_panic_write as condition
* plat-ram: correctly free memory on error path in platram_probe()

Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Message-Id: <20201216132615.15529-1-zhengyongjun3@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

- DS4 power and firmware reporting fixes, from Roderick Colenbrander
- support for ghlive PS3/WII u dongles, from Pascal Giard