- 10 Dec, 2013 14 commits
-
-
Dan Carpenter authored
We recently introduced some new error paths which are missing their unlocks. Fixes: 64f7ef8a ('[media] cxusb: Don't use dynamic static allocation') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dan Carpenter authored
It upsets static checkers when we don't check for allocation failure. I moved the memset() of "tv" earlier so we don't use uninitialized data on error. Fixes: 1d212cf0 ('[media] cx18: struct i2c_client is too big for stack') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Matthias Schwarzott authored
Add usb id of Hauppauge WinTV-HVR-930C HD to mceusb RC driver. This device has no IR transmitter (according to eeprom content decoded by tveeprom). Set the rc mapping to Hauppauge, every key of the deliviered remote control works correctly. [m.chehab@samsung.com: fix merge conflicts and unmangled whitespace] Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Wei Yongjun authored
We had set the pci drvdata in cx88_audio_initdev() as a type of struct snd_card, so cx88_audio_finidev() should used it as the same type too. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Evgeny Plehov authored
Use RC Core instead of the legacy RC. DVBWorld, TBS, TeVii, Prof hardware decode only NEC remotes (one byte code). Geniatech hardware decode only RC5 (two bytes). + New keymap for Geniatech HDStar (SU3000). Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Evgeny Plehov authored
Support for Geniatech T220 DVB-T/T2/C USB stick. Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Wei Yongjun authored
We had set the i2c clientdata to &flash->subdev_led[LM3560_LED1] after call lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1"), but the container_of() in lm3560_remove() return the wrong pointer to flash.(should be container_of(subdev, struct lm3560_flash, subdev_led[LM3560_LED_MAX-1]) This patch fix to set i2c clientdata to flash so we can get flash from clientdata directly. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Wei Yongjun authored
Add the missing unlock before return from function lm3560_set_ctrl() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Antti Palosaari authored
It is IT9135 dual design. Thanks to Michael Piko for reporting that! Reported-by: Michael Piko <michael@piko.com.au> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
This helps increasing build testing coverage. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Roland Scheidegger authored
This is similar to the Terratec H7. It works with the same az6007 firmware as the former, however the drx-k firmware of the H7 will NOT work. Hence use a different firmware name. The firmware does not need to exist as the one in the eeprom is just fine as long as the h7 one doesn't get loaded, but maybe some day someone wants to load it (the one from the h5 would work too). Also since the config entry is now different anyway disable support for rc. AFAIK the Technisat remote (TS35) is RC5 and the code (which a code comment claims doesn't work anyway) only would handle NEC hence it's pointless creating a device and polling it if we already know it can't work. CI is untested. Originally based on idea found on http://www.linuxtv.org/wiki/index.php/TechniSat_CableStar_Combo_HD_CI claiming only id needs to be added (but failed to mention it only worked because the driver couldn't find the h7 drx-k firmware...). Signed-off-by: Roland Scheidegger <rscheidegger_lists@hispeed.ch> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Wei Yongjun authored
In case of error, the function devm_kzalloc() and devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Wei Yongjun authored
module_platform_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
- 09 Dec, 2013 12 commits
-
-
Mauro Carvalho Chehab authored
As value can be initialized with a value lower than zero, change it to int, to avoid those warnings: drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_rds_pi_read': drivers/staging/media/bcm2048/radio-bcm2048.c:1989:9: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] struct bcm2048_device *bdev = dev_get_drvdata(dev); \ ^ drivers/staging/media/bcm2048/radio-bcm2048.c:2070:1: note: in expansion of macro 'property_read' property_read(rds_pi, unsigned int, "%x") ^ drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_fm_rds_flags_read': drivers/staging/media/bcm2048/radio-bcm2048.c:1989:9: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] struct bcm2048_device *bdev = dev_get_drvdata(dev); \ ^ drivers/staging/media/bcm2048/radio-bcm2048.c:2074:1: note: in expansion of macro 'property_read' property_read(fm_rds_flags, unsigned int, "%u") ^ drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_region_bottom_frequency_read': drivers/staging/media/bcm2048/radio-bcm2048.c:1989:9: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] struct bcm2048_device *bdev = dev_get_drvdata(dev); \ ^ drivers/staging/media/bcm2048/radio-bcm2048.c:2077:1: note: in expansion of macro 'property_read' property_read(region_bottom_frequency, unsigned int, "%u") ^ drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_region_top_frequency_read': drivers/staging/media/bcm2048/radio-bcm2048.c:1989:9: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] struct bcm2048_device *bdev = dev_get_drvdata(dev); \ ^ drivers/staging/media/bcm2048/radio-bcm2048.c:2078:1: note: in expansion of macro 'property_read' property_read(region_top_frequency, unsigned int, "%u") Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Ricardo Ribalda authored
Memory exported via remap_pfn_range cannot be remapped via get_user_pages. Other videobuf2 methods (like the dma-contig) supports io memory. This patch adds support for this kind of memory. v2: Comments by Marek Szyprowski -Use vb2_get_vma and vb2_put_vma Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Ricardo Ribalda authored
vb2_fop_release does not hold the lock although it is modifying the queue->owner field. This could lead to race conditions on the vb2_perform_io function when multiple applications are accessing the video device via read/write API: [ 308.297741] BUG: unable to handle kernel NULL pointer dereference at 0000000000000260 [ 308.297759] IP: [<ffffffffa07a9fd2>] vb2_perform_fileio+0x372/0x610 [videobuf2_core] [ 308.297794] PGD 159719067 PUD 158119067 PMD 0 [ 308.297812] Oops: 0000 #1 SMP [ 308.297826] Modules linked in: qt5023_video videobuf2_dma_sg qtec_xform videobuf2_vmalloc videobuf2_memops videobuf2_core qtec_white qtec_mem gpio_xilinx qtec_cmosis qtec_pcie fglrx(PO) spi_xilinx spi_bitbang qt5023 [ 308.297888] CPU: 1 PID: 2189 Comm: java Tainted: P O 3.11.0-qtec-standard #1 [ 308.297919] Hardware name: QTechnology QT5022/QT5022, BIOS PM_2.1.0.309 X64 05/23/2013 [ 308.297952] task: ffff8801564e1690 ti: ffff88014dc02000 task.ti: ffff88014dc02000 [ 308.297962] RIP: 0010:[<ffffffffa07a9fd2>] [<ffffffffa07a9fd2>] vb2_perform_fileio+0x372/0x610 [videobuf2_core] [ 308.297985] RSP: 0018:ffff88014dc03df8 EFLAGS: 00010202 [ 308.297995] RAX: 0000000000000000 RBX: ffff880158a23000 RCX: dead000000100100 [ 308.298003] RDX: 0000000000000000 RSI: dead000000200200 RDI: 0000000000000000 [ 308.298012] RBP: ffff88014dc03e58 R08: 0000000000000000 R09: 0000000000000001 [ 308.298020] R10: ffffea00051e8380 R11: ffff88014dc03fd8 R12: ffff880158a23070 [ 308.298029] R13: ffff8801549040b8 R14: 0000000000198000 R15: 0000000001887e60 [ 308.298040] FS: 00007f65130d5700(0000) GS:ffff88015ed00000(0000) knlGS:0000000000000000 [ 308.298049] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 308.298057] CR2: 0000000000000260 CR3: 0000000159630000 CR4: 00000000000007e0 [ 308.298064] Stack: [ 308.298071] ffff880156416c00 0000000000198000 0000000000000000 ffff880100000001 [ 308.298087] ffff88014dc03f50 00000000810a79ca 0002000000000001 ffff880154904718 [ 308.298101] ffff880156416c00 0000000000198000 ffff880154904338 ffff88014dc03f50 [ 308.298116] Call Trace: [ 308.298143] [<ffffffffa07aa3c4>] vb2_read+0x14/0x20 [videobuf2_core] [ 308.298198] [<ffffffffa07aa494>] vb2_fop_read+0xc4/0x120 [videobuf2_core] [ 308.298252] [<ffffffff8154ee9e>] v4l2_read+0x7e/0xc0 [ 308.298296] [<ffffffff8116e639>] vfs_read+0xa9/0x160 [ 308.298312] [<ffffffff8116e882>] SyS_read+0x52/0xb0 [ 308.298328] [<ffffffff81784179>] tracesys+0xd0/0xd5 [ 308.298335] Code: e5 d6 ff ff 83 3d be 24 00 00 04 89 c2 4c 8b 45 b0 44 8b 4d b8 0f 8f 20 02 00 00 85 d2 75 32 83 83 78 03 00 00 01 4b 8b 44 c5 48 <8b> 88 60 02 00 00 85 c9 0f 84 b0 00 00 00 8b 40 58 89 c2 41 89 [ 308.298487] RIP [<ffffffffa07a9fd2>] vb2_perform_fileio+0x372/0x610 [videobuf2_core] [ 308.298507] RSP <ffff88014dc03df8> [ 308.298514] CR2: 0000000000000260 [ 308.298526] ---[ end trace e8f01717c96d1e41 ]--- Signed-off-by: Ricardo Ribalda <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Seung-Woo Kim authored
__qbuf_dmabuf checks whether size of provided dmabuf is large enough, and it returns error without any log. So this patch adds error log in the case. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Ricardo Ribalda authored
According to the doc: If VIDIOC_STREAMON is called when streaming is already in progress, or if VIDIOC_STREAMOFF is called when streaming is already stopped, then the ioctl does nothing and 0 is returned. The current implementation was returning -EINVAL instead. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Ricardo Ribalda authored
num_pages_from_user and buf->num_pages were swapped. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Daniel Jeong authored
Correct reference of reading values. (rval -> reg_val) Add the missing unlock before return from function lm3560_get_ctrl() to avoid deadlock. Thank you Dan Carpenter & Sakari. Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Ricardo Ribalda Delgado authored
internal_csi_format_idx and csi_format_idx are unsigned integers, therefore they can never be nevative. CC drivers/media/i2c/smiapp/smiapp-core.o In file included from include/linux/err.h:4:0, from include/linux/clk.h:15, from drivers/media/i2c/smiapp/smiapp-core.c:29: drivers/media/i2c/smiapp/smiapp-core.c: In function ‘smiapp_update_mbus_formats’: include/linux/kernel.h:669:20: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] #define min(x, y) ({ \ ^ include/linux/compiler.h:153:42: note: in definition of macro ‘unlikely’ # define unlikely(x) __builtin_expect(!!(x), 0) ^ drivers/media/i2c/smiapp/smiapp-core.c:402:2: note: in expansion of macro ‘BUG_ON’ BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0); ^ drivers/media/i2c/smiapp/smiapp-core.c:402:9: note: in expansion of macro ‘min’ BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0); ^ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
Describe the tasks to be done for this driver to be promoted to a non-staging one. [m.chehab@samsung.com: Add a patch description; add a note about the CodingStyle issues and make sure that the README lines are not bigger than 80 cols.] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
Add suport for Nokia N900 radio. This driver is far from being ready to be added at the main tree, as it creates its own sysfs interface, and violates lots of Coding Style rules, doing even evil things like returning from a function inside a macro. So, it is being added at staging with the condition that it will be soon be fixed. [m.chehab@samsung.com: added a description for the patch] Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Nils Faerber <nils.faerber@kernelconcepts.de> Signed-off-by: Joni Lapilainen <joni.lapilainen@gmail.com> Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: moved to staging, added slab.h include] Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Luis Alves authored
This patch should fix/enhance the set_voltage function for the cx24117 demodulator. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Luis Alves authored
This patch adds the complete list of all the commands known for the cx24117 demodulator. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
- 04 Dec, 2013 14 commits
-
-
Sylwester Nawrocki authored
The fimc_is_hw_wait_intsr0_intsd0() function is currently unused and can be safely removed. The other polling function simplified and ETIME error code is replaced with more commonly used ETIMEDOUT. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Roel Kluin authored
In case no valid pixelcode is found, an i of -1 after the loop is out of bounds for the array. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Dan Carpenter authored
This define is only used in s5pcsis_irq_handler(): if ((status & S5PCSIS_INTSRC_NON_IMAGE_DATA) && pktbuf->data) { The problem is that "status" is a 32 bit and (0xff << 28) is larger than 32 bits and that sets off a static checker warning. I consulted with Sylwester Nawrocki and the define should actually be (0xf << 28). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mateusz Krawczuk authored
Replace clk_enable() by clock_enable_prepare() and clk_disable() with clk_disable_unprepare(). clk_{prepare/unprepare} calls are required by common clock framework and this driver was missed while converting all users of the Samsung original clocks driver to its new implementation based on the common clock API. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Tomasz Stanislawski <t.stanislaws@samsung.com> [s.nawrocki@samsung.com: edited commit description] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mateusz Krawczuk authored
Replace clk_enable() by clock_enable_prepare() and clk_disable() with clk_disable_unprepare(). clk_{prepare/unprepare} calls are required by common clock framework and this driver was missed while converting all users of the Samsung original clocks driver to its new implementation based on the common clock API. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [s.nawrocki@samsung.com: edited commit description] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mateusz Krawczuk authored
Restore vpll clock rate if start stream fail or stream is off. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [s.nawrocki@samsung.com: fixed whitespace error reported by checkpath.pl] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Simplify the driver by using the m2m ioctl and vb2 helpers. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Simplify the driver by using the m2m ioctl and vb2 helpers. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Simplify the FIMC mem-to-mem driver by using the m2m ioctl and vb2 helpers. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Simplify the driver by using the m2m ioctl and vb2 helpers. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
This patch adds ioctl helpers to the V4L2 mem-to-mem API, so we can avoid several ioctl handlers in the mem-to-mem video node drivers that are simply a pass-through to the v4l2_m2m_* calls. These helpers will only be useful for drivers that use same mutex for both OUTPUT and CAPTURE queue, which is the case for all currently in tree v4l2 m2m drivers. In order to use the helpers the drivers are required to use struct v4l2_fh. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sakari Ailus authored
The configuration of many other blocks depend on resizer maximum data rate. Get the value from resizer at link validation time. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sakari Ailus authored
Mark pads that must be connected. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sakari Ailus authored
Do not allow streaming if a pad with MEDIA_PAD_FL_MUST_CONNECT flag is not connected by an active link. This patch makes it possible to avoid drivers having to check for the most common case of link state validation: a sink pad that must be connected. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-