- 19 Apr, 2018 23 commits
-
-
Heiner Kallweit authored
rx_buf_sz is constant, so we don't have to pass it as parameter and in general can replace it with a constant. When working on this I noticed that also before in rtl_set_rx_max_size() a value of 0x4000 is set, what is not in line with the chip spec. According to the spec only bits 0..13 are used and we set an effective value of zero therefore. However, the driver still seems to work and due to potential side effects I'm reluctant to make a change. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
rtl8169_rx_fill() is called only once and directly before the call array tp->Rx_databuff[] is filled with zero's. Therefore we don't need this check. Signed-off-by:
-
Heiner Kallweit authored
This function doesn't use the net_device, therefore change the parameter to type struct rtl8169_private * to simplify the code. In addition we don't need the calculations in the memset statements, we can use the size of the arrays directly. Signed-off-by:
-
Heiner Kallweit authored
dev->dev.parent has the same value as tp_to_dev(tp) (set by SET_NETDEV_DEV() in rtl_init_one()) and we know it can't be NULL. This allows us to simplify the code. Signed-off-by:
-
Heiner Kallweit authored
napi_schedule() is called from hard irq context, so we can switch to napi_schedule_irqoff() and avoid some overhead. Signed-off-by:
-
Heiner Kallweit authored
We can use generic constant NAPI_POLL_WAIT instead of defining an own constant for the same value. Signed-off-by:
-
Heiner Kallweit authored
Not a giant leap for mankind, but let's avoid the open-coded memcpy and use standard helper skb_copy_to_linear_data instead. Signed-off-by:
-
Heiner Kallweit authored
Since commit 6f0333b8 "r8169: use 50% less ram for RX ring" member align isn't used any longer, so remove it. Signed-off-by:
-
Heiner Kallweit authored
Member features of struct rtl8169_private isn't used any longer since commit 6c6aa15f "r8169: improve interrupt handling", so remove it. Signed-off-by:
-
David S. Miller authored
Murali Karicheri says: ==================== Add support for netcp driver on K2G SoC K2G SoC is another variant of Keystone family of SoCs. This patch series add support for NetCP driver on this SoC. The QMSS found on K2G SoC is a cut down version of the QMSS found on other keystone devices with less number of queues, internal link ram etc. The patch series has 2 patch sets that goes into the drivers/soc and the rest has to be applied to net sub system. Please review and merge if this looks good. K2G TRM is located at http://www.ti.com/lit/ug/spruhy8g/spruhy8g.pdf Thanks The boot logs on K2G ICE board (tftp boot over Ethernet and from mmc) https://pastebin.ubuntu.com/p/yvZ6drFhkW/ The boot logs on K2G GP board (tftp boot over Ethernet and from mmc) https://pastebin.ubuntu.com/p/QTr6K7s4Zp/ Also regressed boot on K2HK and K2L EVMs as we have modified GBE version detection logic (K2E uses same version of NetCP as in K2L. So regression on one of them is needed). Boot log on K2L and K2HK EVMs are at https://pastebin.ubuntu.com/p/N9DBdPjbvR/ This series applies to net-next master branch. Change history: v4 - ready for merge to net-next Folded the series "Add promiscous mode support in k2g network driver" into this. Fixed a typo in 5/11 (sgmii to rgmii) based on TI internal comment Reworked 4/11 and title changed to reflect additional changes to exclude sgmii configuration code for 2U cpsw. Use IS_SS_ID_2U() macro for customization. Added Reviewed-by from Rob Herring against 1/13 v3 - Addressed comments from Andrew Lunn and Grygorii Strashko against v2. v2 - Addressed following comments on initial version - split patch 3/5 to multiple patches from Andrew Lunn ==================== Signed-off-by:
-
WingMan Kwok authored
This patch adds support for promiscuous mode in k2g's network driver. When upper layer instructs to transition from non-promiscuous mode to promiscuous mode or vice versa K2G network driver needs to configure ALE accordingly so that in case of non-promiscuous mode, ALE will not flood all unicast packets to host port, while in promiscuous mode, it will pass all received unicast packets to host port. Signed-off-by:
WingMan Kwok <w-kwok2@ti.com> Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
WingMan Kwok authored
This patch adds an API to support setting rx mode in netcp modules. If a netcp module needs to be notified when upper layer transitions from one rx mode to another and react accordingly, such a module will implement the new API set_rx_mode added in this patch. Currently rx modes supported are PROMISCUOUS and NON_PROMISCUOUS modes. Signed-off-by:
-
Murali Karicheri authored
The netcp driver shouldn't proceed until the knav qmss and dma devices are ready. So return -EPROBE_DEFER if these devices are not ready. Signed-off-by:
-
Murali Karicheri authored
As the probe sequence is not guaranteed contrary to the assumption of the commit 2d8e276a9030, same has to be reverted. commit 2d8e276a9030 ("net: netcp: remove dead code from the driver") Signed-off-by: -
Murali Karicheri authored
The phy used for K2G allows for internal delays to be added optionally to the clock circuitry based on board desing. To add this support, enhance the driver to use of_get_phy_mode() to read the phy-mode from the phy device and pass the same to phy through of_phy_connect(). Signed-off-by:
-
Murali Karicheri authored
The stats block in 2u cpsw hardware is similar to the one on nu and hence handle it in a similar way by using a macro that includes 2u hardware as well. Signed-off-by:
-
Murali Karicheri authored
The driver currently support only vlan priority zero. So map the vlan priorities to zero flow in hardware. Signed-off-by:
-
Murali Karicheri authored
Introduce rgmii link status to handle link state events for 2u cpsw hardware on K2G. Signed-off-by:
-
Murali Karicheri authored
2u cpsw hardware on K2G uses rgmii link to interface with Phy. So add support for this interface in the code so that driver can be re-used for 2u hardware. Signed-off-by:
-
Murali Karicheri authored
As a preparatory patch to add support for 2u cpsw hardware found on K2G SoC, make sgmii configuration conditional. This is required since 2u uses RGMII interface instead of SGMII and to allow for driver re-use. Signed-off-by:
-
Murali Karicheri authored
Driver currently uses macro for NU and XBE hardwrae, while other places for older hardware such as that on K2H/K SoC (version 1.4 of the cpsw hardware, it explicitly check for the ss_version inline. Add a new macro for version 1.4 and use it to customize code in the driver. While at it also fix similar issue with checking XBE version by re-using existing macro IS_SS_ID_XGBE(). Signed-off-by:
-
Murali Karicheri authored
This patch provide APIs to allow client drivers to support probe deferral. On K2G SoC, devices can be probed only after the ti_sci_pm_domains driver is probed and ready. As drivers may get probed at different order, any driver that depends on knav dma and qmss drivers, for example netcp network driver, needs to defer probe until knav devices are probed and ready to service. To do this, add an API to query the device ready status from the knav dma and qmss devices. Signed-off-by:
-
Murali Karicheri authored
Navigator Subsystem (NAVSS) available on K2G SoC has a cut down version of QMSS with less number of queues, internal linking ram with lesser number of buffers etc. It doesn't have status and explicit push register space as in QMSS available on other K2 SoCs. So define reg indices specific to QMSS on K2G. This patch introduces "ti,66ak2g-navss-qm" compatibility to identify QMSS on K2G NAVSS and to customize the dts handling code. Per Device manual, descriptors with index less than or equal to regions0_size is in region 0 in the case of K2 QMSS where as for QMSS on K2G, descriptors with index less than regions0_size is in region 0. So update the size accordingly in the regions0_size bits of the linking ram size 0 register. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 18 Apr, 2018 17 commits
-
-
David S. Miller authored
David Ahern says: ==================== net/ipv6: Separate data structures for FIB and data path IPv6 uses the same data struct for both control plane (FIB entries) and data path (dst entries). This struct has elements needed for both paths adding memory overhead and complexity (taking a dst hold in most places but an additional reference on rt6i_ref in a few). Furthermore, because of the dst_alloc tie, all FIB entries are allocated with GFP_ATOMIC. This patch set separates FIB entries from dst entries, better aligning IPv6 code with IPv4, simplifying the reference counting and allowing FIB entries added by userspace (not autoconf) to use GFP_KERNEL. It is first step to a number of performance and scalability changes. The end result of this patch set: - FIB entries (fib6_info): /* size: 208, cachelines: 4, members: 25 */ /* sum members: 207, holes: 1, sum holes: 1 */ - dst entries (rt6_info) /* size: 240, cachelines: 4, members: 11 */ Versus the the single rt6_info struct today for both paths: /* size: 320, cachelines: 5, members: 28 */ This amounts to a 35% reduction in memory use for FIB entries and a 25% reduction for dst entries. With respect to locking FIB entries use RCU and a single atomic counter with fib6_info_hold and fib6_info_release helpers to manage the reference counting. dst entries use only the traditional dst refcounts with dst_hold and dst_release. FIB entries for host routes are referenced by inet6_ifaddr and ifacaddr6. In both cases, additional holds are taken -- similar to what is done for devices. This set is the first of many changes to improve the scalability of the IPv6 code. Follow on changes include: - consolidating duplicate fib6_info references like IPv4 does with duplicate fib_info - moving fib6_info into a slab cache to avoid allocation roundups to power of 2 (the 208 size becomes a 256 actual allocation) - Allow FIB lookups without generating a dst (e.g., most rt6_lookup users just want to verify the egress device). Means moving dst allocation to the other side of fib6_rule_lookup which again aligns with IPv4 behavior - using separate standalone nexthop objects which have performance benefits beyond fib_info consolidation At this point I am not seeing any refcount leaks or underflows, no oops or bug_ons, or warnings from kasan, so I think it is ready for others to beat up on it finding errors in code paths I have missed. v2 changes - rebased to top of tree - improved commit message on patch 7 v1 changes - rebased to top of tree - fix memory leak of metrics as noted by Ido - MTU fixes based on pmtu tests (thanks Stefano Brivio for writing) RFC v2 changes - improved commit messages - move common metrics code from dst.c to net/ipv4/metrics.c (comment from DaveM) - address comments from Wei Wang and Martin KaFai Lau (let me know if I missed something) - fixes detected by kernel test robots + added fib6_metric_set to change metric on a FIB entry which could be pointing to read-only dst_default_metrics + 0day testing found a problem with an intermediate patch; added dst_hold_safe on rt->from. Code is removed 3 patches later - allow cacheinfo to handle NULL dst; means only expires is pushed to userspace ==================== Signed-off-by: -
David Ahern authored
Drop unneeded elements from rt6_info struct and rearrange layout to something more relevant for the data path. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
Convert all code paths referencing a FIB entry from rt6_info to fib6_info. Signed-off-by:
-
David Ahern authored
Last step before flipping the data type for FIB entries: - use fib6_info_alloc to create FIB entries in ip6_route_info_create and addrconf_dst_alloc - use fib6_info_release in place of dst_release, ip6_rt_put and rt6_release - remove the dst_hold before calling __ip6_ins_rt or ip6_del_rt - when purging routes, drop per-cpu routes - replace inc and dec of rt6i_ref with fib6_info_hold and fib6_info_release - use rt->from since it points to the FIB entry - drop references to exception bucket, fib6_metrics and per-cpu from dst entries (those are relevant for fib entries only) Signed-off-by:
-
David Ahern authored
Add fib6_info struct and alloc, destroy, hold and release helpers. Signed-off-by:
-
David Ahern authored
IPv6 FIB will only contain FIB entries with exception routes added to the FIB entry. Once this transformation is complete, FIB lookups will return a fib6_info with the lookup functions still returning a dst based rt6_info. The current code uses rt6_info for both paths and overloads the rt6_info variable usually called 'rt'. This patch introduces a new 'f6i' variable name for the result of the FIB lookup and keeps 'rt' as the dst based return variable. 'f6i' becomes a fib6_info in a later patch which is why it is introduced as f6i now; avoids the additional churn in the later patch. In addition, remove RTF_CACHE and dst checks from fib6 add and delete since they can not happen now and will never happen after the data type flip. Signed-off-by:
-
David Ahern authored
Most FIB entries can be added using memory allocated with GFP_KERNEL. Add gfp_flags to ip6_route_add and addrconf_dst_alloc. Code paths that can be reached from the packet path (e.g., ndisc and autoconfig) or atomic notifiers use GFP_ATOMIC; paths from user context (adding addresses and routes) use GFP_KERNEL. Signed-off-by:
-
David Ahern authored
The router discovery code has a FIB entry and wants to validate the gateway has a neighbor entry. Refactor the existing dst_neigh_lookup for IPv6 and create a new function that takes the gateway and device and returns a neighbor entry. Use the new function in ndisc_router_discovery to validate the gateway. Signed-off-by:
-
David Ahern authored
Continuing to wean FIB paths off of dst_entry, use a bool to hold requests for certain dst settings. Add a helper to convert the flags to DST flags when a FIB entry is converted to a dst_entry. Signed-off-by:
-
David Ahern authored
ip6_pol_route_lookup is the lookup function for ip6_route_lookup and rt6_lookup. At the moment it returns either a reference to a FIB entry or a cached exception. To move FIB entries to a separate struct, this lookup function needs to convert FIB entries to an rt6_info that is returned to the caller. Signed-off-by:
-
David Ahern authored
ip6_null_entry will stay a dst based return for lookups that fail to match an entry. Add a new fib6_null_entry which constitutes the root node and leafs for fibs. Replace existing references to ip6_null_entry with the new fib6_null_entry when dealing with FIBs. Signed-off-by:
-
David Ahern authored
Add expires to rt6_info for FIB entries, and add fib6 helpers to manage it. Data path use of dst.expires remains. The transition is fairly straightforward: when working with fib entries, rt->dst.expires is just rt->expires, rt6_clean_expires is replaced with fib6_clean_expires, rt6_set_expires becomes fib6_set_expires, and rt6_check_expired becomes fib6_check_expired, where the fib6 versions are added by this patch. Signed-off-by:
-
David Ahern authored
Similar to IPv4, add fib metrics to the fib struct, which at the moment is rt6_info. Will be moved to fib6_info in a later patch. Copy metrics into dst by reference using refcount. To make the transition: - add dst_metrics to rt6_info. Default to dst_default_metrics if no metrics are passed during route add. No need for a separate pmtu entry; it can reference the MTU slot in fib6_metrics - ip6_convert_metrics allocates memory in the FIB entry and uses ip_metrics_convert to copy from netlink attribute to metrics entry - the convert metrics call is done in ip6_route_info_create simplifying the route add path + fib6_commit_metrics and fib6_copy_metrics and the temporary mx6_config are no longer needed - add fib6_metric_set helper to change the value of a metric in the fib entry since dst_metric_set can no longer be used - cow_metrics for IPv6 can drop to dst_cow_metrics_generic - rt6_dst_from_metrics_check is no longer needed - rt6_fill_node needs the FIB entry and dst as separate arguments to keep compatibility with existing output. Current dst address is renamed to dest. (to be consistent with IPv4 rt6_fill_node really should be split into 2 functions similar to fib_dump_info and rt_fill_info) - rt6_fill_node no longer needs the temporary metrics variable Signed-off-by: -
David Ahern authored
Defer setting dst input, output and error until fib entry is copied. The reject path from ip6_route_info_create is moved to a new function ip6_rt_init_dst_reject with a helper doing the conversion from fib6_type to dst error. The remainder of the new ip6_rt_init_dst is an amalgamtion of dst code from addrconf_dst_alloc and the non-reject path of ip6_route_info_create. The dst output function is always ip6_output and the input function is either ip6_input (local routes), ip6_mc_input (multicast routes) or ip6_forward (anything else). A couple of places using dst.error are updated to look at rt6i_flags. Signed-off-by:
-
David Ahern authored
Introduce fib6_nh structure and move nexthop related data from rt6_info and rt6_info.dst to fib6_nh. References to dev, gateway or lwtstate from a FIB lookup perspective are converted to use fib6_nh; datapath references to dst version are left as is. Signed-off-by:
-
David Ahern authored
The RTN_ type for IPv6 FIB entries is currently embedded in rt6i_flags and dst.error. Since dst is going to be removed, it can no longer be relied on for FIB dumps so save the route type as fib6_type. fc_type is set in current users based on the algorithm in rt6_fill_node: - rt6i_flags contains RTF_LOCAL: fc_type = RTN_LOCAL - rt6i_flags contains RTF_ANYCAST: fc_type = RTN_ANYCAST - else fc_type = RTN_UNICAST Similarly, fib6_type is set in the rt6_info templates based on the RTF_REJECT section of rt6_fill_node converting dst.error to RTN type. Signed-off-by:
-
David Ahern authored
Code move only. Signed-off-by:
-
