This enables a broadcast sink to be informed if the PA
it has synced with is associated with an encrypted BIG,
by retrieving the socket QoS and checking the encryption
field.

After PA sync has been successfully established and the
first BIGInfo advertising report is received, a new hcon
is added and notified to the ISO layer. The ISO layer
sets the encryption field of the socket and hcon QoS
according to the encryption parameter of the BIGInfo
advertising report event.

After that, the userspace is woken up, and the QoS of the
new PA sync socket can be read, to inspect the encryption
field and follow up accordingly.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This fixes the master BIS cleanup procedure - as opposed to CIS cleanup,
no HCI disconnect command should be issued. A master BIS should only be
terminated by disabling periodic and extended advertising, and terminating
the BIG.

In case of a Broadcast Receiver, all BIS and PA connections can be
cleaned up by calling hci_conn_failed, since it contains all function
calls that are necessary for successful cleanup.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Commit a243ecc3 ("net: mdio: xgene: Use device_get_match_data()")
dropped the unconditional use of xgene_mdio_of_match resulting in this
warning:

drivers/net/mdio/mdio-xgene.c:303:34: warning: unused variable 'xgene_mdio_of_match' [-Wunused-const-variable]

The fix is to drop of_match_ptr() which is not necessary because DT is
always used for this driver (well, it could in theory support ACPI only,
but CONFIG_OF is always enabled for arm64).

Fixes: a243ecc3 ("net: mdio: xgene: Use device_get_match_data()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310170832.xnVXw1bb-lkp@intel.com/Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231019182345.833136-1-robh@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

checkpatch gets confused and treats __attribute__ as a function call.
It complains about white space before "(":

WARNING:SPACING: space prohibited between function name and open parenthesis '('
+	struct netdev_queue_get_rsp obj __attribute__ ((aligned (8)));

No spaces wins in the kernel:

  $ git grep 'attribute__((.*aligned(' | wc -l
  480
  $ git grep 'attribute__ ((.*aligned (' | wc -l
  110
  $ git grep 'attribute__ ((.*aligned(' | wc -l
  94
  $ git grep 'attribute__((.*aligned (' | wc -l
  63

So, whatever, change the codegen.

Note that checkpatch also thinks we should use __aligned(),
but this is user space code.

Link: https://lore.kernel.org/all/202310190900.9Dzgkbev-lkp@intel.com/Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231020221827.3436697-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Prior to commit 1a074f76 ("tls: also use init_prot_info in
tls_set_device_offload"), setting TLS_HW on TX didn't touch
prot->aad_size and prot->tail_size. They are set to 0 during context
allocation (tls_prot_info is embedded in tls_context, kzalloc'd by
tls_ctx_create).

When the RX key is configured, tls_set_sw_offload is called (for both
TLS_SW and TLS_HW). If the TX key is configured in TLS_HW mode after
the RX key has been installed, init_prot_info will now overwrite the
correct values of aad_size and tail_size, breaking SW decryption and
causing -EBADMSG errors to be returned to userspace.

Since TLS_HW doesn't use aad_size and tail_size at all (for TLS1.2,
tail_size is always 0, and aad_size is equal to TLS_HEADER_SIZE +
rec_seq_size), we can simply drop this hunk.

Fixes: 1a074f76 ("tls: also use init_prot_info in tls_set_device_offload")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Ran Rozenstein <ranro@nvidia.com>
Link: https://lore.kernel.org/r/979d2f89a6a994d5bb49cae49a80be54150d094d.1697653889.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

'err' is useless after break, remove this to save space and
be more clear.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: add optional usec resolution to TCP TS

As discussed in various public places in 2016, Google adopted
usec resolution in RFC 7323 TS values, at Van Jacobson suggestion.

Goals were :

1) better observability of delays in networking stacks/fabrics.

2) better disambiguation of events based on TSval/ecr values.

3) building block for congestion control modules needing usec resolution.

Back then we implemented a schem based on private SYN options
to safely negotiate the feature.

For upstream submission, we chose to use a much simpler route
attribute because this feature is probably going to be used
in private networks.

ip route add 10/8 ... features tcp_usec_ts

References:

https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf
https://datatracker.ietf.org/doc/draft-wang-tcpm-low-latency-opt/

First two patches are fixing old minor bugs and might be taken
by stable teams (thanks to appropriate Fixes: tags)
====================
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the ability to report in tcp_info.tcpi_options if
a flow is using usec resolution in TCP TS val.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Back in 2015, Van Jacobson suggested to use usec resolution in TCP TS values.
This has been implemented in our private kernels.

Goals were :

1) better observability of delays in networking stacks.
2) better disambiguation of events based on TSval/ecr values.
3) building block for congestion control modules needing usec resolution.

Back then we implemented a schem based on private SYN options
to negotiate the feature.

For upstream submission, we chose to use a route attribute,
because this feature is probably going to be used in private
networks [1] [2].

ip route add 10/8 ... features tcp_usec_ts

Note that RFC 7323 recommends a
  "timestamp clock frequency in the range 1 ms to 1 sec per tick.",
but also mentions
  "the maximum acceptable clock frequency is one tick every 59 ns."

[1] Unfortunately RFC 7323 5.5 (Outdated Timestamps) suggests
to invalidate TS.Recent values after a flow was idle for more
than 24 days. This is the part making usec_ts a problem
for peers following this recommendation for long living
idle flows.

[2] Attempts to standardize usec ts went nowhere:

https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf
https://datatracker.ietf.org/doc/draft-wang-tcpm-low-latency-opt/Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_paws_check() uses TCP_PAWS_24DAYS constant to detect if TCP TS
values might have wrapped after a long idle period.

This mechanism is described in RFC 7323 5.5 (Outdated Timestamps)

TCP_PAWS_24DAYS value was based on the assumption of a clock
of 1 Khz.

As we want to adopt a 1 Mhz clock in the future, we reduce
this constant.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This new dst feature flag will be used to allow TCP to use usec
based timestamps instead of msec ones.

ip route .... feature tcp_usec_ts

Also document that RTAX_FEATURE_SACK and RTAX_FEATURE_TIMESTAMP
are unused.

RTAX_FEATURE_ALLFRAG is also going away soon.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before adding usec TS support, add tcp_rtt_tsopt_us() helper
to factorize code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This helper returns a TSval from a TCP socket.

It currently calls tcp_time_stamp_ms() but will soon
be able to return a usec based TSval, depending
on an upcoming tp->tcp_usec_ts field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_ns_to_ts() is only used once from cookie_init_timestamp().

Also add the 'bool usec_ts' parameter to enable usec TS later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This helper returns a 32bit TCP TSval from skb->tstamp.

As we are going to support usec or ms units soon, rename it
to tcp_skb_timestamp_ts() and add a boolean to select the unit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation of usec TCP TS support, remove tcp_time_stamp_raw()
in favor of tcp_clock_ts() helper. This helper will return a suitable
32bit result to feed TS values, depending on a socket field.

Also add tcp_tw_tsval() and tcp_rsk_tsval() helpers to factorize
the details.

We do not yet support usec timestamps.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It delivers current TCP time stamp in ms unit, and is used
in place of confusing tcp_time_stamp_raw()

It is the same family than tcp_clock_ns() and tcp_clock_ms().

tcp_time_stamp_raw() will be replaced later for TSval
contexts with a more descriptive name.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation of adding usec TCP TS values, add tcp_time_stamp_ms()
for contexts needing ms based values.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cookie_init_timestamp() is supposed to return a 64bit timestamp
suitable for both TSval determination and setting of skb->tstamp.

Unfortunately it uses 32bit fields and overflows after
2^32 * 10^6 nsec (~49 days) of uptime.

Generated TSval are still correct, but skb->tstamp might be set
far away in the past, potentially confusing other layers.

tcp_ns_to_ts() is changed to return a full 64bit value,
ts and ts_now variables are changed to u64 type,
and TSMASK is removed in favor of shifts operations.

While we are at it, change this sequence:
		ts >>= TSBITS;
		ts--;
		ts <<= TSBITS;
		ts |= options;
to:
		ts -= (1UL << TSBITS);

Fixes: 9a568de4 ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tp->rcv_tstamp should be set to tcp_jiffies, not tcp_time_stamp().

Fixes: cc35c88a ("crypto : chtls - CPL handler definition")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Beniamino Galvani says:

====================
net: consolidate IPv6 route lookup for UDP tunnels

At the moment different UDP tunnels rely on different functions for
IPv6 route lookup, and those functions all implement the same
logic.

Extend the generic lookup function so that it is suitable for all UDP
tunnel implementations, and then adapt bareudp, geneve and vxlan to
use it.

This is similar to what already done for IPv4.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The route lookup can be done now via generic function
udp_tunnel6_dst_lookup() to replace the custom implementation in
vxlan6_get_route().

This is similar to what already done for IPv4 in commit 6f19b2c1
("vxlan: use generic function for tunnel IPv4 route lookup").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The route lookup can be done now via generic function
udp_tunnel6_dst_lookup() to replace the custom implementation in
geneve_get_v6_dst().

This is similar to what already done for IPv4 in commit daa2ba7e
("geneve: use generic function for tunnel IPv4 route lookup").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:

 - source and destination UDP port;
 - ifindex of the output interface, needed by vxlan;
 - the tos, because in some cases it is not taken from struct
   ip_tunnel_info (for example, when it's inherited from the inner
   packet);
 - the dst cache, because not all tunnel types (e.g. vxlan) want to
   use the one from struct ip_tunnel_info.

With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).

This is similar to what already done for IPv4 in commit 72fc68c6
("ipv4: add new arguments to udp_tunnel_dst_lookup()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function is now UDP-specific, the protocol is always IPPROTO_UDP.

This is similar to what already done for IPv4 in commit 78f3655a
("ipv4: remove "proto" argument from udp_tunnel_dst_lookup()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

At the moment ip6_dst_lookup_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.

Prepare for these changes by renaming the function to
udp_tunnel6_dst_lookup() and move it to file
net/ipv6/ip6_udp_tunnel.c.

This is similar to what already done for IPv4 in commit bf3fcbf7
("ipv4: rename and move ip_route_output_tunnel()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Checking the 'adev' variable is unnecessary,
because 'cdev' has already been checked earlier.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: 656d98b0 ("[ATM]: basic sysfs support for ATM devices")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Update for net-next

The first 2 patches are fixes for the recently added hwmon changes.
The next 6 patches are enhancements to support ethtool lanes and
all the proper supported and advertised link modes.  Before these
patches, the driver was only supporting the link modes for copper
media.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current driver code does not accurately report the supported and
advertised link modes.  It basically always assumes the media type
is copper for any particular speed.  Utilize the recently added link
mode mappings to accurately report fully qualified ethtool link modes for
advertised and supported speeds.

If the media type is known, we will report the supported link modes for
that media only.  If the media is not known, we will report all possible
supported link modes.  The user can now specify any supported link modes
(including NRZ and PAM4) to advertise for autoneg.  It used to only accept
copper NRZ modes.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Barring the BNXT_FW_TO_ETHTOOL speed macros, which will be removed
in the next patch, update code to use the newer API.

No functional change.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor some NRZ/PAM4 link speed related logic into helper functions.
The NRZ and PAM4 link parameters are stored in separate structure fields.
The driver logic has to check whether it is in NRZ or PAM4 mode and
then use the appropriate field.

Refactor this logic into helper functions for better readability.
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A future patch in this series will change the algorithm used to
determine ethtool speed and media modes. Extract the handling of
the unrelated pause, autoneg modes into an independent function.
Also separate FEC handling out of bnxt_fw_to_ethtool_*_spds().

No functional change.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent kernels support changing the number of link lanes via ethtool.
This is useful for determining the appropriate signal mode to use when
a given link speed can be achieved using different lane configurations.

Accept the ethtool lanes parameter when configuring forced speed.  If
there is no lanes parameter, select a default.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add infrastructure to look up the enum ethtool_link_mode_bit_indices
from link information provided by the firmware.  The link speed,
signal mode, and media type returned by firmware will be used to
look up the ethtool link mode.

The immediate benefit is that once the link mode is determined, we can
now use ethtool_params_from_link_mode() to fill the basic ethtool
parameters including the number of lanes.  Lanes will be fully
supported in the next patch.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

FW sends the async event to the driver when the device temperature goes
above or below the threshold values.  Only notify hwmon if the
temperature is increasing to the next alert level, not when it is
decreasing.

Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Defer hwmon_notify_event() to bnxt_sp_task() workqueue because
hwmon_notify_event() can try to acquire a mutex shown in the stack trace
below.  Modify bnxt_event_error_report() to return true if we need to
schedule bnxt_sp_task() to notify hwmon.

  __schedule+0x68/0x520
  hwmon_notify_event+0xe8/0x114
  schedule+0x60/0xe0
  schedule_preempt_disabled+0x28/0x40
  __mutex_lock.constprop.0+0x534/0x550
  __mutex_lock_slowpath+0x18/0x20
  mutex_lock+0x5c/0x70
  kobject_uevent_env+0x2f4/0x3d0
  kobject_uevent+0x10/0x20
  hwmon_notify_event+0x94/0x114
  bnxt_hwmon_notify_event+0x40/0x70 [bnxt_en]
  bnxt_event_error_report+0x260/0x290 [bnxt_en]
  bnxt_async_event_process.isra.0+0x250/0x850 [bnxt_en]
  bnxt_hwrm_handler.isra.0+0xc8/0x120 [bnxt_en]
  bnxt_poll_p5+0x150/0x350 [bnxt_en]
  __napi_poll+0x3c/0x210
  net_rx_action+0x308/0x3b0
  __do_softirq+0x120/0x3e0

Cc: Guenter Roeck <linux@roeck-us.net>
Fixes: a19b4801 ("bnxt_en: Event handler for Thermal event")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clean up structure defines related to hardware data to be
asserted to fixed sizes, as padding is not allowed
by hardware.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mv88e6xxx_tai_write() can return error code (-EOPNOTSUPP ...) if failed.
So check the value of 'ret' after calling mv88e6xxx_tai_write().
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a test to check if inner rt curves are upgraded to sc curves.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

We expect chinfo.name to be NUL-terminated based on its use with format
strings and sprintf:
rpmsg/rpmsg_char.c
165:            dev_err(dev, "failed to open %s\n", eptdev->chinfo.name);
368:    return sprintf(buf, "%s\n", eptdev->chinfo.name);

... and with strcmp():
|  static struct rpmsg_endpoint *qcom_glink_create_ept(struct rpmsg_device *rpdev,
|  						    rpmsg_rx_cb_t cb,
|  						    void *priv,
|  						    struct rpmsg_channel_info
|  									chinfo)
|  ...
|  const char *name = chinfo.name;
|  ...
|  		if (!strcmp(channel->name, name))

Since chinfo is initialized as such (just above the strscpy()):

|       struct rpmsg_channel_info chinfo = {
|               .src = rpwwan->rpdev->src,
|               .dst = RPMSG_ADDR_ANY,
|       };

... we know other members are zero-initialized. This means no
NUL-padding is required (as any NUL-byte assignments are redundant).

Considering the above, a suitable replacement is `strscpy` due to the
fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231019-strncpy-drivers-net-wwan-rpmsg_wwan_ctrl-c-v2-1-ecf9b5a39430@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>