- 15 Dec, 2021 7 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-2021-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.16 Second set of fixes for v5.16, hopefully also the last one. I changed my email in MAINTAINERS, one crash fix in iwlwifi and some build problems fixed. iwlwifi * fix crash caused by a warning * fix LED linking problem brcmsmac * rework LED dependencies for being consistent with other drivers mt76 * mt7921: fix build regression ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-14 This series contains updates to ice driver only. Karol corrects division that was causing incorrect calculations and adds a check to ensure stale timestamps are not being used. ==================== Signed-off-by: -
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes for ULP, a deadlock, and netlink docs Two of the MPTCP fixes in this set are related to the TCP_ULP socket option with MPTCP sockets operating in "fallback" mode (the connection has reverted to regular TCP). The other issues are an observed deadlock and missing parameter documentation in the MPTCP netlink API. Patch 1 marks TCP_ULP as unsupported earlier in MPTCP setsockopt code, so the fallback code path in the MPTCP layer does not pass the TCP_ULP option down to the subflow TCP socket. Patch 2 makes sure a TCP fallback socket returned to userspace by accept()ing on a MPTCP listening socket does not allow use of the "mptcp" TCP_ULP type. That ULP is intended only for use by in-kernel MPTCP subflows. Patch 3 fixes the possible deadlock when sending data and there are socket option changes to sync to the subflows. Patch 4 makes sure all MPTCP netlink event parameters are documented in the MPTCP uapi header. ==================== Link: https://lore.kernel.org/r/20211214231604.211016-1-mathew.j.martineau@linux.intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
'loc_id' and 'rem_id' are set in all events linked to subflows but those were missing in the events description in the comments. Fixes: b911c97c ("mptcp: add netlink event support") Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Maxim Galaganov authored
__mptcp_push_pending() may call mptcp_flush_join_list() with subflow socket lock held. If such call hits mptcp_sockopt_sync_all() then subsequently __mptcp_sockopt_sync() could try to lock the subflow socket for itself, causing a deadlock. sysrq: Show Blocked State task:ss-server state:D stack: 0 pid: 938 ppid: 1 flags:0x00000000 Call Trace: <TASK> __schedule+0x2d6/0x10c0 ? __mod_memcg_state+0x4d/0x70 ? csum_partial+0xd/0x20 ? _raw_spin_lock_irqsave+0x26/0x50 schedule+0x4e/0xc0 __lock_sock+0x69/0x90 ? do_wait_intr_irq+0xa0/0xa0 __lock_sock_fast+0x35/0x50 mptcp_sockopt_sync_all+0x38/0xc0 __mptcp_push_pending+0x105/0x200 mptcp_sendmsg+0x466/0x490 sock_sendmsg+0x57/0x60 __sys_sendto+0xf0/0x160 ? do_wait_intr_irq+0xa0/0xa0 ? fpregs_restore_userregs+0x12/0xd0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9ba546c2d0 RSP: 002b:00007ffdc3b762d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9ba56c8060 RCX: 00007f9ba546c2d0 RDX: 000000000000077a RSI: 0000000000e5e180 RDI: 0000000000000234 RBP: 0000000000cc57f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ba56c8060 R13: 0000000000b6ba60 R14: 0000000000cc7840 R15: 41d8685b1d7901b8 </TASK> Fix the issue by using __mptcp_flush_join_list() instead of plain mptcp_flush_join_list() inside __mptcp_push_pending(), as suggested by Florian. The sockopt sync will be deferred to the workqueue. Fixes: 1b3e7ede ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/244Suggested-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Maxim Galaganov <max@internet.ru> Signed-off-by:
-
Florian Westphal authored
The mptcp ULP extension relies on sk->sk_sock_kern being set correctly: It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from working for plain tcp sockets (any userspace-exposed socket). But in case of fallback, accept() can return a plain tcp sk. In such case, sk is still tagged as 'kernel' and setsockopt will work. This will crash the kernel, The subflow extension has a NULL ctx->conn mptcp socket: BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0 Call Trace: tcp_data_ready+0xf8/0x370 [..] Fixes: cf7da0d6 ("mptcp: Create SUBFLOW socket for incoming connections") Signed-off-by:
-
Florian Westphal authored
TCP_ULP setsockopt cannot be used for mptcp because its already used internally to plumb subflow (tcp) sockets to the mptcp layer. syzbot managed to trigger a crash for mptcp connections that are in fallback mode: KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0 RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline] [..] __tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline] tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160 do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391 mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638 Remove support for TCP_ULP setsockopt. Fixes: d9e4c129 ("mptcp: only admit explicitly supported sockopt") Reported-by: syzbot+1fd9b69cde42967d1add@syzkaller.appspotmail.com Signed-off-by:
-
- 14 Dec, 2021 21 commits
-
-
Karol Kolacinski authored
The driver has to check if it does not accidentally put the timestamp in the SKB before previous timestamp gets overwritten. Timestamp values in the PHY are read only and do not get cleared except at hardware reset or when a new timestamp value is captured. The cached_tstamp field is used to detect the case where a new timestamp has not yet been captured, ensuring that we avoid sending stale timestamp data to the stack. Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices") Signed-off-by:
Karol Kolacinski <karol.kolacinski@intel.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Karol Kolacinski authored
Change the division in ice_ptp_adjfine from div_u64 to div64_u64. div_u64 is used when the divisor is 32 bit but in this case incval is 64 bit and it caused incorrect calculations and incval adjustments. Fixes: 06c16d89 ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: MAC profiles occupancy fix Patch #1 fixes a router interface (RIF) MAC profiles occupancy bug that was merged in the last cycle. Patch #2 adds a selftest that fails without the fix. ==================== Signed-off-by: -
Danielle Ratson authored
Add a test case to cover the bug fixed by the previous patch. Edit the MAC address of one netdev so that it matches the MAC address of the second netdev. Verify that the two MAC profiles were consolidated by testing that the MAC profiles occupancy decreased by one. Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Danielle Ratson authored
Currently, when setting a router interface (RIF) MAC address while the MAC profile is not shared with other RIFs, the profile is edited so that the new MAC address is assigned to it. This does not take into account a situation in which the new MAC address already matches an existing MAC profile. In that situation, two MAC profiles will be occupied even though they hold MAC addresses from the same profile. In order to prevent that, add a check to ensure that editing a MAC profile takes place only when the new MAC address does not match an existing profile. Fixes: 605d25cd ("mlxsw: spectrum_router: Add RIF MAC profiles support") Reported-by:
Maksym Yaremchuk <maksymy@nvidia.com> Tested-by:
-
Hangyu Hua authored
__rds_conn_create() did not release conn->c_path when loop_trans != 0 and trans->t_prefer_loopback != 0 and is_outgoing == 0. Fixes: aced3ce5 ("RDS tcp loopback connection can hang") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Reviewed-by:
Sharath Srinivasan <sharath.srinivasan@oracle.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-net-2021-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A fairly large number of fixes this time: * fix a station info memory leak on insert collisions * a rate control fix for retransmissions * two aggregation setup fixes * reload current regdomain when reloading database * a locking fix in regulatory work * a probe request allocation size fix in mac80211 * apply TCP vs. aggregation (sk pacing) on mesh * fix ordering of channel context update vs. station state * set up skb->dev for mesh forwarding properly * track QoS data frames only for admission control to avoid out-of-bounds read (found by syzbot) * validate extended element ID vs. existing data to avoid out-of-bounds read (found by syzbot) * fix locking in mac80211 aggregation TX setup * fix traffic stall after HW restart when TXQs are used * fix ordering of reconfig/restart after HW restart * fix interface type for extended aggregation capability lookup ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-13 This series contains updates to iavf driver only. Dan Carpenter fixes some missing mutex unlocking. Stefan Assmann restores stopping watchdog from overriding to reset state. ==================== Signed-off-by: -
Baowen Zheng authored
We need to return EOPNOTSUPP for the unsupported mpls action type when setup the flow action. In the original implement, we will return 0 for the unsupported mpls action type, actually we do not setup it and the following actions to the flow action entry. Fixes: 9838b20a ("net: sched: take rtnl lock in tc_setup_flow_action()") Signed-off-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Ong Boon Leong authored
To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue. Fixes: 0e039f5c ("net: stmmac: add RX frame steering based on VLAN priority in tc flower") Tested-by:
Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by:
Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by:
-
Johannes Berg authored
When we reconfigure, the driver might do some things to complete the reconfiguration. It's strange and could be broken in some cases because we restart other works (e.g. remain-on-channel and TX) before this happens, yet only start queues later. Change this to do the reconfig complete when reconfiguration is actually complete, not when we've already started doing other things again. For iwlwifi, this should fix a race where the reconfig can race with TX, for ath10k and ath11k that also use this it won't make a difference because they just start queues there, and mac80211 also stopped the queues and will restart them later as before. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.cab99f22fe19.Iefe494687f15fd85f77c1b989d1149c8efdfdc36@changeidSigned-off-by:
-
Johannes Berg authored
Mark TXQs as having seen transmit while they were stopped if we bail out of drv_wake_tx_queue() due to reconfig, so that the queue wake after this will make them catch up. This is particularly necessary for when TXQs are used for management packets since those TXQs won't see a lot of traffic that'd make them catch up later. Cc: stable@vger.kernel.org Fixes: 4856bfd2 ("mac80211: do not call driver wake_tx_queue op during reconfig") Signed-off-by:
-
Mordechay Goodstein authored
Currently channel context is updated only after station got an update about new assoc state, this results in station using the old channel context. Fix this by moving the update channel context before updating station, enabling the driver to immediately use the updated channel context in the new assoc state. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Ilan Peer authored
Instead of using the hard-coded value of '100' use the correct scan IEs length as calculated during HW registration to mac80211. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Johannes Berg authored
We should be doing the HE capabilities lookup based on the full interface type so if P2P doesn't have HE but client has it doesn't get confused. Fix that. Fixes: 2ab45876 ("mac80211: add support for the ADDBA extension element") Signed-off-by:
-
Johannes Berg authored
Before attempting to parse an extended element, verify that the extended element ID is present. Fixes: 41cbb0f5 ("mac80211: add support for HE") Reported-by: syzbot+59bdff68edce82e393b6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211211201023.f30a1b128c07.I5cacc176da94ba316877c6e10fe3ceec8b4dbd7d@changeid Cc: stable@vger.kernel.org Signed-off-by:
-
Ilan Peer authored
The function cfg80211_reg_can_beacon_relax() expects wiphy mutex to be held when it is being called. However, when reg_leave_invalid_chans() is called the mutex is not held. Fix it by acquiring the lock before calling the function. Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by:
-
Johannes Berg authored
When we call ieee80211_agg_start_txq(), that will in turn call schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb() this is done under sta->lock, which leads to certain circular lock dependencies, as reported by Chris Murphy: https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com In general, ieee80211_agg_start_txq() is usually not called with sta->lock held, only in this one place. But it's always called with sta->ampdu_mlme.mtx held, and that's therefore clearly sufficient. Change ieee80211_stop_tx_ba_cb() to also call it without the sta->lock held, by factoring it out of ieee80211_remove_tid_tx() (which is only called in this one place). This breaks the locking chain and makes it less likely that we'll have similar locking chain problems in the future. Fixes: ba8c3d6f ("mac80211: add an intermediate software queue implementation") Reported-by:
Chris Murphy <lists@colorremedies.com> Signed-off-by:
-
Finn Behrens authored
This removes the previously unused reload flag, which was introduced in 1eda9191. The request is handled as NL80211_REGDOM_SET_BY_CORE, which is parsed unconditionally. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Nathan Chancellor <nathan@kernel.org> Fixes: 1eda9191 ("nl80211: reset regdom when reloading regdb") Link: https://lore.kernel.org/all/YaZuKYM5bfWe2Urn@archlinux-ax161/Signed-off-by:
Finn Behrens <me@kloenk.de> Reviewed-by:
-
Felix Fietkau authored
Sending them out on a different queue can cause a race condition where a number of packets in the queue may be discarded by the receiver, because the ADDBA request is sent too early. This affects any driver with software A-MPDU setup which does not allocate packet seqno in hardware on tx, regardless of whether iTXQ is used or not. The only driver I've seen that explicitly deals with this issue internally is mwl8k. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20211202124533.80388-1-nbd@nbd.nameSigned-off-by:
-
Paolo Abeni authored
Currently, when deleting an endpoint the netlink PM treverses all the local MPTCP sockets, regardless of their status. If an MPTCP listener socket is bound to the IP matching the delete endpoint, the listener TCP socket will be closed. That is unexpected, the PM should only affect data subflows. Additionally, syzbot was able to trigger a NULL ptr dereference due to the above: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897 Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000 R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162 finish_wait+0xc0/0x270 kernel/sched/wait.c:400 inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline] inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497 mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865 inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739 mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345 do_accept+0x382/0x510 net/socket.c:1773 __sys_accept4_file+0x7e/0xe0 net/socket.c:1816 __sys_accept4+0xb0/0x100 net/socket.c:1846 __do_sys_accept net/socket.c:1864 [inline] __se_sys_accept net/socket.c:1861 [inline] __x64_sys_accept+0x71/0xb0 net/socket.c:1861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f177cd8b8e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000 </TASK> Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN status. Reported-and-tested-by: syzbot+e4d843bb96a9431e6331@syzkaller.appspotmail.com Reviewed-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/ebc7594cdd420d241fb2172ddb8542ba64717657.1639238695.git.pabeni@redhat.comSigned-off-by:
-
- 13 Dec, 2021 10 commits
-
-
Stefan Assmann authored
The watchdog task incorrectly changes the state to __IAVF_RESETTING, instead of letting the reset task take care of that. This was already resolved by commit 22c8fd71 ("iavf: do not override the adapter state in the watchdog task") but the problem was reintroduced by the recent code refactoring in commit 45eebd62 ("iavf: Refactor iavf state machine tracking"). Fixes: 45eebd62 ("iavf: Refactor iavf state machine tracking") Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Dan Carpenter authored
This code was re-organized and there some unlocks missing now. Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Tested-by:
-
David Wu authored
Use page_pool_alloc_pages instead of page_pool_dev_alloc_pages, which can give the gfp parameter, in the case of not supporting 64-bit width, using 32-bit address memory can reduce a copy from swiotlb. Signed-off-by:
David Wu <david.wu@rock-chips.com> Signed-off-by:
-
Russell King (Oracle) authored
Recently, a patch has been submitted to "fix" the refcounting for a DT node in of_mdiobus_link_mdiodev(). This is not a leaked refcount. The refcount is passed to the new device. Sadly, coccicheck identifies this location as a leaked refcount, which means we're likely to keep getting patches to "fix" this. However, fixing this will cause breakage. Add a comment to state that the lack of of_node_put() here is intentional. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Wang Qing authored
Fix following coccicheck warning: WARNING: Function "for_each_child_of_node" should have of_node_put() before return. Early exits from for_each_child_of_node should decrement the node reference counter. Signed-off-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
-
Hangbin Liu authored
The recent GRE selftests defined NUM_NETIFS=10. If the users copy forwarding.config.sample to forwarding.config directly, they will get error "Command line is not complete" when run the GRE tests, because create_netif_veth() failed with no interface name defined. Fix it by extending the NETIFS with p9 and p10. Fixes: 2800f248 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
-
Marek Behún authored
Commit 64d47d50 ("net: dsa: mv88e6xxx: configure interface settings in mac_config") removed forcing of speed and duplex from mv88e6xxx_mac_config(), where the link is forced down, and left it only in mv88e6xxx_mac_link_up(), by which time link is unforced. It seems that (at least on 88E6190) when changing cmode to 2500base-x, if the link is not forced down, but the speed or duplex are still forced, the forcing of new settings for speed & duplex doesn't take in mv88e6xxx_mac_link_up(). Fix this by unforcing speed & duplex in mv88e6xxx_mac_link_down(). Fixes: 64d47d50 ("net: dsa: mv88e6xxx: configure interface settings in mac_config") Signed-off-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
-
Willem de Bruijn authored
Tiny fix. Option -u ("use udp") does not take an argument. It can cause the next argument to silently be ignored. Fixes: 5ebfb4cc ("selftests/net: toeplitz test") Signed-off-by:Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Miaoqian Lin authored
The phy_attach() function does not return NULL. It returns error pointers. Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Davide Caratti authored
Shuang reported that the following script: 1) tc qdisc add dev ddd0 handle 10: parent 1: ets bands 8 strict 4 priomap 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 2) mausezahn ddd0 -A 10.10.10.1 -B 10.10.10.2 -c 0 -a own -b 00:c1:a0:c1:a0:00 -t udp & 3) tc qdisc change dev ddd0 handle 10: ets bands 4 strict 2 quanta 2500 2500 priomap 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 crashes systematically when line 2) is commented: list_del corruption, ffff8e028404bd30->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 954 Comm: tc Not tainted 5.16.0-rc4+ #478 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Call Trace: <TASK> ets_qdisc_change+0x58b/0xa70 [sch_ets] tc_modify_qdisc+0x323/0x880 rtnetlink_rcv_msg+0x169/0x4a0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x257/0x4d0 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7efdc8031338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffdf1ce9828 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061b37a97 RCX: 00007efdc8031338 RDX: 0000000000000000 RSI: 00007ffdf1ce9890 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000078a940 R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000688880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev pcspkr i2c_i801 virtio_balloon i2c_smbus lpc_ich ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel serio_raw ghash_clmulni_intel ahci libahci libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: sch_ets] ---[ end trace f35878d1912655c2 ]--- RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x47 Code: fe ff 0f 0b 48 89 c1 4c 89 c6 48 c7 c7 08 42 1b 87 e8 1d c5 fe ff 0f 0b 48 89 fe 48 89 c2 48 c7 c7 98 42 1b 87 e8 09 c5 fe ff <0f> 0b 48 c7 c7 48 43 1b 87 e8 fb c4 fe ff 0f 0b 48 89 f2 48 89 fe RSP: 0018:ffffae46807a3888 EFLAGS: 00010246 RAX: 000000000000004e RBX: 0000000000000007 RCX: 0000000000000202 RDX: 0000000000000000 RSI: ffffffff871ac536 RDI: 00000000ffffffff RBP: ffffae46807a3a10 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffae46807a36a8 R12: ffff8e028404b800 R13: ffff8e028404bd30 R14: dead000000000100 R15: ffff8e02fafa2400 FS: 00007efdc92e4480(0000) GS:ffff8e02fb600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000682f48 CR3: 00000001058be000 CR4: 0000000000350ef0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x4e00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- we can remove 'q->classes[i].alist' only if DRR class 'i' was part of the active list. In the ETS scheduler DRR classes belong to that list only if the queue length is greater than zero: we need to test for non-zero value of 'q->classes[i].qdisc->q.qlen' before removing from the list, similarly to what has been done elsewhere in the ETS code. Fixes: de6d2592 ("net/sched: sch_ets: don't peek at classes beyond 'nbands'") Reported-by:
Shuang Li <shuali@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
- 12 Dec, 2021 2 commits
-
-
David Ahern authored
IPv6 allows binding a socket to a device then binding to an address not on the device (__inet6_bind -> ipv6_chk_addr with strict flag not set). Update the bind tests to reflect legacy behavior. Fixes: 34d0302a ("selftests: Add ipv6 address bind tests to fcnal-test") Reported-by:
Li Zhijian <lizhijian@fujitsu.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
David Ahern authored
Commit referenced below added negative socket bind tests for VRF. The socket binds should fail since the address to bind to is in a VRF yet the socket is not bound to the VRF or a device within it. Update the expected return code to check for 1 (bind failure) so the test passes when the bind fails as expected. Add a 'show_hint' comment to explain why the bind is expected to fail. Fixes: 75b2b2b3 ("selftests: Add ipv4 address bind tests to fcnal-test") Reported-by:
-
