Merge tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - make setlocalversion more robust about -dirty check

 - loosen the pkg-config requirement for Kconfig

 - change missing depmod to a warning from an error

 - warn modules_install when System.map is missing

* tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: modules_install: warn when missing System.map file
  kbuild: make missing $DEPMOD a Warning instead of an Error
  kconfig: do not require pkg-config on make {menu,n}config
  kconfig: remove a spurious self-assignment
  scripts/setlocalversion: git: Make -dirty check more robust

If there is no System.map file for "make modules_install",
scripts/depmod.sh will silently exit with success, having done
nothing.  Since this is an unexpected situation, change it to
report a Warning for the missing file.  The behavior is not
changed except for the Warning message.

The (previous) silent success and new Warning can be reproduced
by:
$ make mrproper; make defconfig
$ make modules; make modules_install

and since System.map is produced by "make vmlinux", the steps
above omit producing the System.map file.
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - Fix a VFP corruption in 32-bit guest
   - Add missing cache invalidation for CoW pages
   - Two small cleanups

  s390:
   - Fallout from the hugetlbfs support: pfmf interpretion and locking
   - VSIE: fix keywrapping for nested guests

  PPC:
   - Fix a bug where pages might not get marked dirty, causing guest
     memory corruption on migration
   - Fix a bug causing reads from guest memory to use the wrong guest
     real address for very large HPT guests (>256G of memory), leading
     to failures in instruction emulation.

  x86:
   - Fix out of bound access from malicious pv ipi hypercalls
     (introduced in rc1)
   - Fix delivery of pending interrupts when entering a nested guest,
     preventing arbitrarily late injection
   - Sanitize kvm_stat output after destroying a guest
   - Fix infinite loop when emulating a nested guest page fault and
     improve the surrounding emulation code
   - Two minor cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
  KVM: LAPIC: Fix pv ipis out-of-bounds access
  KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2
  arm64: KVM: Remove pgd_lock
  KVM: Remove obsolete kvm_unmap_hva notifier backend
  arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD
  KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW
  KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting
  KVM: s390: vsie: copy wrapping keys to right place
  KVM: s390: Fix pfmf and conditional skey emulation
  tools/kvm_stat: re-animate display of dead guests
  tools/kvm_stat: indicate dead guests as such
  tools/kvm_stat: handle guest removals more gracefully
  tools/kvm_stat: don't reset stats when setting PID filter for debugfs
  tools/kvm_stat: fix updates for dead guests
  tools/kvm_stat: fix handling of invalid paths in debugfs provider
  tools/kvm_stat: fix python3 issues
  KVM: x86: Unexport x86_emulate_instruction()
  KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction()
  KVM: x86: Do not re-{try,execute} after failed emulation in L2
  KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault
  ...

Pull ARM SoC fixes from Olof Johansson:
 "A few more fixes who have trickled in:

   - MMC bus width fixup for some Allwinner platforms

   - Fix for NULL deref in ti-aemif when no platform data is passed in

   - Fix div by 0 in SCMI code

   - Add a missing module alias in a new RPi driver"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  memory: ti-aemif: fix a potential NULL-pointer dereference
  firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero
  hwmon: rpi: add module alias to raspberrypi-hwmon
  arm64: allwinner: dts: h6: fix Pine H64 MMC bus width

Merge tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes

Allwinner fixes for 4.19

Just one fix for H6 mmc on the Pine H64: the mmc bus width was missing
from the device tree. This was added in 4.19-rc1.

* tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull i2c fixes from Wolfram Sang:

 - bugfixes for uniphier, i801, and xiic drivers

 - ID removal (never produced) for imx

 - one MAINTAINER addition

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: xiic: Record xilinx i2c with Zynq fragment
  i2c: xiic: Make the start and the byte count write atomic
  i2c: i801: fix DNV's SMBCTRL register offset
  i2c: imx-lpi2c: Remove mx8dv compatible entry
  dt-bindings: imx-lpi2c: Remove mx8dv compatible entry
  i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP
  i2c: uniphier: issue STOP only for last message or I2C_M_STOP

Pull ARC updates from Vineet Gupta:

 - Fix for atomic_fetch_#op  [Will Deacon]

 - Enable per device IOC [Eugeniy Paltsev]

 - Remove redundant gcc version checks [Masahiro Yamada]

 - Miscll platform config/DT updates [Alexey Brodkin]

* tag 'arc-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: don't check for HIGHMEM pages in arch_dma_alloc
  ARC: IOC: panic if both IOC and ZONE_HIGHMEM enabled
  ARC: dma [IOC] Enable per device io coherency
  ARC: dma [IOC]: mark DMA devices connected as dma-coherent
  ARC: atomics: unbork atomic_fetch_##op()
  arc: remove redundant GCC version checks
  ARC: sort Kconfig
  ARC: cleanup show_faulting_vma()
  ARC: [plat-axs*]: Enable SWAP
  ARC: [plat-axs*/plat-hsdk]: Allow U-Boot to pass MAC-address to the kernel
  ARC: configs: cleanup

Fix the cell specification mechanism to allow cells to be pre-created
without having to specify at least one address (the addresses will be
upcalled for).

This allows the cell information preload service to avoid the need to issue
loads of DNS lookups during boot to get the addresses for each cell (500+
lookups for the 'standard' cell list[*]).  The lookups can be done later as
each cell is accessed through the filesystem.

Also remove the print statement that prints a line every time a new cell is
added.

[*] There are 144 cells in the list.  Each cell is first looked up for an
    SRV record, and if that fails, for an AFSDB record.  These get a list
    of server names, each of which then has to be looked up to get the
    addresses for that server.  E.g.:

	dig srv _afs3-vlserver._udp.grand.central.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MD fixes from Shaohua Li:

 - Fix a locking issue for md-cluster (Guoqing)

 - Fix a sync crash for raid10 (Ni)

 - Fix a reshape bug with raid5 cache enabled (me)

* tag 'md/4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md-cluster: release RESYNC lock after the last resync message
  RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0
  md/raid5-cache: disable reshape completely

Pull ceph fixes from Ilya Dryomov:
 "Two rbd patches to complete support for images within namespaces that
  went into -rc1 and a use-after-free fix.

  The rbd changes have been sitting in a branch for quite a while but
  couldn't be included into the -rc1 pull request because of a pending
  wire protocol backwards compatibility fixup that only got committed
  early this week"

* tag 'ceph-for-4.19-rc3' of https://github.com/ceph/ceph-client:
  rbd: support cloning across namespaces
  rbd: factor out get_parent_info()
  ceph: avoid a use-after-free in ceph_destroy_options()

Pull fsnotify fix from Jan Kara:
 "A small fsnotify fix from Amir"

* tag 'for_v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: fix ignore mask logic in fsnotify()

Pull arm64 fix from Will Deacon:
 "Just one small fix here, preventing a VM_WARN_ON when a !present
  PMD/PUD is "freed" as part of a huge ioremap() operation.

  The correct behaviour is to skip the free silently in this case, which
  is a little weird (the function is a bit of a misnomer), but it
  follows the x86 implementation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix erroneous warnings in page freeing functions

Pull ACPI fixes from Rafael Wysocki:
 "These fix a regression from the 4.18 cycle in the ACPI driver for
  Intel SoCs (LPSS) and prevent dmi_check_system() from being called on
  non-x86 systems in the ACPI core.

  Specifics:

   - Fix a power management regression in the ACPI driver for Intel SoCs
     (LPSS) introduced by a system-wide suspend/resume fix during the
     4.18 cycle (Zhang Rui).

   - Prevent dmi_check_system() from being called on non-x86 systems in
     the ACPI core (Jean Delvare)"

* tag 'acpi-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / LPSS: Force LPSS quirks on boot
  ACPI / bus: Only call dmi_check_system() on X86

Pull sound fixes from Takashi Iwai:
 "Just a few small fixes:

   - a fix for the recursive work cancellation in a specific HD-audio
     operation mode

   - a fix for potentially uninitialized memory access via rawmidi

   - the register bit access fixes for ASoC HD-audio"

* tag 'sound-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: Fix several mismatch for register mask and value
  ALSA: rawmidi: Initialize allocated buffers
  ALSA: hda - Fix cancel_work_sync() stall from jackpoll work

Dan Carpenter reported that the untrusted data returns from kvm_register_read()
results in the following static checker warning:
  arch/x86/kvm/lapic.c:576 kvm_pv_send_ipi()
  error: buffer underflow 'map->phys_map' 's32min-s32max'

KVM guest can easily trigger this by executing the following assembly sequence
in Ring0:

mov $10, %rax
mov $0xFFFFFFFF, %rbx
mov $0xFFFFFFFF, %rdx
mov $0, %rsi
vmcall

As this will cause KVM to execute the following code-path:
vmx_handle_exit() -> handle_vmcall() -> kvm_emulate_hypercall() -> kvm_pv_send_ipi()
which will reach out-of-bounds access.

This patch fixes it by adding a check to kvm_pv_send_ipi() against map->max_apic_id,
ignoring destinations that are not present and delivering the rest. We also check
whether or not map->phys_map[min + i] is NULL since the max_apic_id is set to the
max apic id, some phys_map maybe NULL when apic id is sparse, especially kvm
unconditionally set max_apic_id to 255 to reserve enough space for any xAPIC ID.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
[Add second "if (min > map->max_apic_id)" to complete the fix. -Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Consider the case L1 had a IRQ/NMI event until it executed
VMLAUNCH/VMRESUME which wasn't delivered because it was disallowed
(e.g. interrupts disabled). When L1 executes VMLAUNCH/VMRESUME,
L0 needs to evaluate if this pending event should cause an exit from
L2 to L1 or delivered directly to L2 (e.g. In case L1 don't intercept
EXTERNAL_INTERRUPT).

Usually this would be handled by L0 requesting a IRQ/NMI window
by setting VMCS accordingly. However, this setting was done on
VMCS01 and now VMCS02 is active instead. Thus, when L1 executes
VMLAUNCH/VMRESUME we force L0 to perform pending event evaluation by
requesting a KVM_REQ_EVENT.

Note that above scenario exists when L1 KVM is about to enter L2 but
requests an "immediate-exit". As in this case, L1 will
disable-interrupts and then send a self-IPI before entering L2.
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Merge tag 'kvm-arm-fixes-for-v4.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm

Fixes for KVM/ARM for Linux v4.19 v2:

 - Fix a VFP corruption in 32-bit guest
 - Add missing cache invalidation for CoW pages
 - Two small cleanups

KVM: s390: Fixes for 4.19

- Fallout from the hugetlbfs support: pfmf interpretion and locking
- VSIE: fix keywrapping for nested guests

The lock has never been used and the page tables are protected by
mmu_lock in struct kvm.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>

kvm_unmap_hva is long gone, and we only have kvm_unmap_hva_range to
deal with. Drop the now obsolete code.

Fixes: fb1522e0 ("KVM: update to new mmu_notifier semantic v2")
Cc: James Hogan <jhogan@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>

If trapping FPSIMD in the context of an AArch32 guest, it is critical
to set FPEXC32_EL2.EN to 1 so that the trapping is taken to EL2 and
not EL1.

Conversely, it is just as critical *not* to set FPEXC32_EL2.EN to 1
if we're not going to trap FPSIMD, as we then corrupt the existing
VFP state.

Moving the call to __activate_traps_fpsimd32 to the point where we
know for sure that we are going to trap ensures that we don't set that
bit spuriously.

Fixes: e6b673b7 ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing")
Cc: stable@vger.kernel.org # v4.18
Cc: Dave Martin <dave.martin@arm.com>
Reported-by: Alexander Graf <agraf@suse.de>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>

When triggering a CoW, we unmap the RO page via an MMU notifier
(invalidate_range_start), and then populate the new PTE using another
one (change_pte). In the meantime, we'll have copied the old page
into the new one.

The problem is that the data for the new page is sitting in the
cache, and should the guest have an uncached mapping to that page
(or its MMU off), following accesses will bypass the cache.

In a way, this is similar to what happens on a translation fault:
We need to clean the page to the PoC before mapping it. So let's just
do that.

This fixes a KVM unit test regression observed on a HiSilicon platform,
and subsequently reproduced on Seattle.

Fixes: a9c0e12e ("KVM: arm/arm64: Only clean the dcache on translation fault")
Cc: stable@vger.kernel.org # v4.16+
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>

Include xilinx soft i2c controller to Zynq fragment to make clear who is
responsible for it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Merge ACPI core fix to avoid calling dmi_check_system() on non-x86.

* acpi-bus:
  ACPI / bus: Only call dmi_check_system() on X86

Pull drm fixes from Dave Airlie:
 "Seems to have been overly quiet this week so I expect next week will
  be more stuff, just one pull from Rodrigo with i915 fixes in it.

  Quoting Rodrigo:

    'The critical fix here on display side is the DP MST regression one.

     But this pull also include fixes for DP SST, small VDSC register
     fix and GVT's bucked with "BXT fixes, two guest warning fixes,
     dmabuf format mod fix and one for recent multiple VM timeout
     failure'."

* tag 'drm-fixes-2018-09-07' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/dp_mst: Fix enabling pipe clock for all streams
  drm/i915/dsc: Fix PPS register definition macros for 2nd VDSC engine
  drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"
  drm/i915/gvt: Give new born vGPU higher scheduling chance
  drm/i915/gvt: Fix drm_format_mod value for vGPU plane
  drm/i915/gvt: move intel_runtime_pm_get out of spin_lock in stop_schedule
  drm/i915/gvt: Handle GEN9_WM_CHICKEN3 with F_CMD_ACCESS.
  drm/i915/gvt: Make correct handling to vreg BXT_PHY_CTL_FAMILY
  drm/i915/gvt: emulate gen9 dbuf ctl register access

Pull m68knommu fix from Greg Ungerer:
 "A single change to fix booting on ColdFire platforms that have RAM
  starting at a non-0 address"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: fix early memory reservation for ColdFire MMU systems

Merge tag 'drm-intel-fixes-2018-09-05' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

The critical fix here on display side is the DP MST regression one.
But this pull also include fixes for DP SST, small VDSC register fix
and GVT's bucked with "BXT fixes, two guest warning fixes, dmabuf
format mod fix and one for recent multiple VM timeout failure."
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905183000.GA2151@intel.com

Pull MIPS fix from Paul Burton:
 "A single fix for v4.19-rc3, resolving a problem with our VDSO data
  page for systems with dcache aliasing. Those systems could previously
  observe stale data, causing clock_gettime() & gettimeofday() to return
  incorrect values"

* tag 'mips_fixes_4.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: VDSO: Match data page cache colouring when D$ aliases

Pull cifs fixes from Steve French:
 "Four small SMB3 fixes, three for stable, and one minor debug
  clarification"

* tag '4.19-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: connect to servername instead of IP for IPC$ share
  smb3: check for and properly advertise directory lease support
  smb3: minor debugging clarifications in rfc1001 len processing
  SMB3: Backup intent flag missing for directory opens with backupuid mounts
  fs/cifs: don't translate SFM_SLASH (U+F026) to backslash

Pull block fixes from Jens Axboe:
 "Small collection of fixes that should go into this release. This
  contains:

   - Small series that fixes a race between blkcg teardown and writeback
     (Dennis Zhou)

   - Fix disallowing invalid block size settings from the nbd ioctl (me)

   - BFQ fix for a use-after-free on last release of a bfqg (Konstantin
     Khlebnikov)

   - Fix for the "don't warn for flush" fix (Mikulas)"

* tag 'for-linus-20180906' of git://git.kernel.dk/linux-block:
  block: bfq: swap puts in bfqg_and_blkg_put
  block: don't warn when doing fsync on read-only devices
  nbd: don't allow invalid blocksize settings
  blkcg: use tryget logic when associating a blkg with a bio
  blkcg: delay blkg destruction until after writeback has finished
  Revert "blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()"

Disable interrupts while configuring the transfer and enable them back.

We have below as the programming sequence
1. start and slave address
2. byte count and stop

In some customer platform there was a lot of interrupts between 1 and 2
and after slave address (around 7 clock cyles) if 2 is not executed
then the transaction is nacked.

To fix this case make the 2 writes atomic.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[wsa: added a newline for better readability]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

Fix trivial use-after-free. This could be last reference to bfqg.

Fixes: 8f9bebc3 ("block, bfq: access and cache blkg data only when safe")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Platform data pointer may be NULL. We check it everywhere but in one
place. Fix it.

Fixes: 8af70cd2 ("memory: aemif: add support for board files")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>

In pmd_free_pte_page() and pud_free_pmd_page() we try to warn if they
hit a present non-table entry. In both cases we'll warn for non-present
entries, as the VM_WARN_ON() only checks the entry is not a table entry.

This has been observed to result in warnings when booting a v4.19-rc2
kernel under qemu.

Fix this by bailing out earlier for non-present entries.

Fixes: ec28bb9c ("arm64: Implement page table free interfaces")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

This pull request contains Broadcom ARM/ARM64 SoCs drivers fixes for
4.19, please pull the following:

- Peter adds an alias to the Raspberry Pi HWMON driver that was just
  merged as part of the 4.19 merge window

* tag 'arm-soc/for-4.19/drivers-fixes' of https://github.com/Broadcom/stblinux:
  hwmon: rpi: add module alias to raspberrypi-hwmon
Signed-off-by: Olof Johansson <olof@lixom.net>

Firmware can provide zero as values for sustained performance level and
corresponding sustained frequency in kHz in order to hide the actual
frequencies and provide only abstract values. It may endup with divide
by zero scenario resulting in kernel panic.

Let's set the multiplication factor to one if either one or both of them
(sustained_perf_level and sustained_freq) are set to zero.

Fixes: a9e3fbfa ("firmware: arm_scmi: add initial support for performance protocol")
Reported-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'apparmor-pr-2018-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor fix from John Johansen:
 "A fix for an issue syzbot discovered last week:

   - Fix for bad debug check when converting secids to secctx"

* tag 'apparmor-pr-2018-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: fix bad debug check in apparmor_secid_to_secctx()

Pull tracing fixes from Steven Rostedt:
 "This fixes two annoying bugs:

   - The first one is a side effect caused by using SRCU for rcuidle
     tracepoints. It seems that the perf was depending on the rcuidle
     tracepoints to make RCU watch when it wasn't.

     The real fix will be to have perf use SRCU instead of depending on
     RCU watching, but that can't be done until SRCU is safe to use in
     NMI context (Paul's working on that).

   - The second bug fix is for a bug that's been periodically making my
     tests fail randomly for some time. I haven't had time to track it
     down, but finally have. It has to do with stressing NMIs (via perf)
     while enabling or disabling ftrace function handling with lockdep
     enabled.

     If an interrupt happens and just as it returns, it sets lockdep
     back to "interrupts enabled" but before it returns an NMI is
     triggered, and if this happens while printk_nmi_enter has a
     breakpoint attached to it (because ftrace is converting it to or
     from nop to call fentry), the breakpoint trap also calls into
     lockdep, and since returning from the NMI to a interrupt handler,
     interrupts were disabled when the NMI went off, lockdep keeps its
     state as interrupts disabled when it returns back from the
     interrupt handler where interrupts are enabled.

     This causes lockdep_assert_irqs_enabled() to trigger a false
     positive"

* tag 'trace-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  printk/tracing: Do not trace printk_nmi_enter()
  tracing: Add back in rcu_irq_enter/exit_irqson() for rcuidle tracepoints

Pull btrfs fixes from David Sterba:

 - fix for improper fsync after hardlink

 - fix for a corruption during file deduplication

 - use after free fixes

 - RCU warning fix

 - fix for buffered write to nodatacow file

* tag 'for-4.19-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Fix suspicious RCU usage warning in btrfs_debug_in_rcu
  btrfs: use after free in btrfs_quota_enable
  btrfs: btrfs_shrink_device should call commit transaction at the end
  btrfs: fix qgroup_free wrong num_bytes in btrfs_subvolume_reserve_metadata
  Btrfs: fix data corruption when deduplicating between different files
  Btrfs: sync log after logging new name
  Btrfs: fix unexpected failure of nocow buffered writes after snapshotting when low on space

I hit the following splat in my tests:

------------[ cut here ]------------
IRQs not enabled as expected
WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tick_nohz_idle_enter+0x44/0x8c
Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00
75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0
e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b
EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007
ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296
CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0
Call Trace:
 do_idle+0x33/0x202
 cpu_startup_entry+0x61/0x63
 start_secondary+0x18e/0x1ed
 startup_32_smp+0x164/0x168
irq event stamp: 18773830
hardirqs last  enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10
hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10
softirqs last  enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf
softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b
---[ end trace b7c64aa79e17954a ]---

After a bit of debugging, I found what was happening. This would trigger
when performing "perf" with a high NMI interrupt rate, while enabling and
disabling function tracer. Ftrace uses breakpoints to convert the nops at
the start of functions to calls to the function trampolines. The breakpoint
traps disable interrupts and this makes calls into lockdep via the
trace_hardirqs_off_thunk in the entry.S code. What happens is the following:

  do_idle {

    [interrupts enabled]

    <interrupt> [interrupts disabled]
	TRACE_IRQS_OFF [lockdep says irqs off]
	[...]
	TRACE_IRQS_IRET
	    test if pt_regs say return to interrupts enabled [yes]
	    TRACE_IRQS_ON [lockdep says irqs are on]

	    <nmi>
		nmi_enter() {
		    printk_nmi_enter() [traced by ftrace]
		    [ hit ftrace breakpoint ]
		    <breakpoint exception>
			TRACE_IRQS_OFF [lockdep says irqs off]
			[...]
			TRACE_IRQS_IRET [return from breakpoint]
			   test if pt_regs say interrupts enabled [no]
			   [iret back to interrupt]
	   [iret back to code]

    tick_nohz_idle_enter() {

	lockdep_assert_irqs_enabled() [lockdep say no!]

Although interrupts are indeed enabled, lockdep thinks it is not, and since
we now do asserts via lockdep, it gives a false warning. The issue here is
that printk_nmi_enter() is called before lockdep_off(), which disables
lockdep (for this reason) in NMIs. By simply not allowing ftrace to see
printk_nmi_enter() (via notrace annotation) we keep lockdep from getting
confused.

Cc: stable@vger.kernel.org
Fixes: 42a0bb3f ("printk/nmi: generic solution for safe printk in NMI")
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>