- 12 May, 2016 1 commit
-
-
Bart Van Assche authored
Change one occurrence of "boundries" into "boundaries". Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Laurence Oberman <loberman@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
- 05 May, 2016 11 commits
-
-
Doug Ledford authored
-
Hariprasad S authored
Use c4iw_ep_disconnect() instead. This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. This is the last user of abort_connection(), so remove it too. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad S authored
In c4iw_ep_disconnect(), if we fail to initiate a close operation, then move the qp to ERROR to disassociate the ep from the qp. Failure to do this will leak the ep resources. Signed-off-by:
-
Hariprasad S authored
Instead return whether the caller needs to disconnect. This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. Signed-off-by:
-
Hariprasad S authored
Use c4iw_ep_disconnect() instead. This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. Signed-off-by:
-
Hariprasad S authored
Signed-off-by:
-
Hariprasad S authored
Instead, have the caller, rx_data() handle the close/abort like it does for process_mpa_request(). This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. Signed-off-by:
-
Hariprasad S authored
In rx_data(), with the ep in FPDU_MODE, refcnt=2, if we get unexpected streaming data, we call c4iw_modify_rc_qp() and move the qp from RTS -> TERMINATE. In c4iw_modify_rc_qp(), if rdma_fini() returns an error, the ep will be dereferenced (refcnt=1). Then rx_data() calls c4iw_ep_disconnect() which starts the close operation. But if send_halfclose() fails in c4iw_ep_disconnect(), we will call release_ep_resources() derefing the ep which reduces the refcnt to 0 and and frees the ep. However we still has the ep mutex at that point, so we have a touch-after-free bug. There is a similar issue where peer_close() calls c4iw_ep_disconnect(). The solution is to add a reference to the ep in c4iw_ep_disconnect() after acquiring the mutex, and release it after releasing the mutex. Signed-off-by:
-
Hariprasad S authored
In c4iw_ep_disconnect(), if we start the ep timer to begin a close, but send_halfclose() fails, we need to stop the timer and send a CLOSE event up to the IWCM before releasing the resources. Otherwise, we can crash when the ep timer fires if the ep is referencing a previous instance of the device. This can happen as part of adapter reset/recovery, for instance. Signed-off-by:
-
Hariprasad S authored
If ARP fails before the CPL_PASS_ACCEPT_RPL is seen by hardware, the tid will be stuck in SYN_PEND and never released. So create an arp failure handler specifically for this message to release the endpoint resources. In pass_accept_rpl_arp_failure(), put the parent endpoint so it will be freed when destroyed. Also we don't need to call release_tid() here because _c4iw_free_ep() calls cxgb4_remove_tid() which releases the hwtid. If we get an ABORT_REQ_RSS instead of a PASS_ESTABLISH (because the peer's ACK to our SYN is never received), then put the parent as well in peer_abort(). Treat accept_cr() failures just like arp failures: put the parent ep and release the ep resources destroying the tid The ARP failure handlers are called in an atomic context, so we need to schedule some of the processing which might block. Namely _c4iw_free_ep() which needs a mutex. So create a "special" CPL opcode and handler and schedule it via sched() to be run by process_work() in a blockable context. Also rework the active open arp failure handler to make use of release_ep_resources(). This allows both the active and passive arp failure handlers to use the same deferred cleanup function. Signed-off-by:
-
Christoph Hellwig authored
iSER currently has a couple places that set max_sectors in either the host template or SCSI host, and all of them get it wrong. This patch instead uses a single assignment that (hopefully) gets it right: the max_sectors value must be derived from the number of segments in the FR or FMR structure, but actually be one lower than the page size multiplied by the number of sectors, as it has to handle the case of non-aligned I/O. Without this I get trivial to reproduce hangs when running xfstests (on XFS) over iSER to Linux targets. Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Acked-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
- 29 Apr, 2016 1 commit
-
-
Florian Westphal authored
Alternatively one could free the skb, OTOH I don't think this test is useful so just remove it. Cc: <linux-rdma@vger.kernel.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 28 Apr, 2016 27 commits
-
-
Tatyana Nikolova authored
Fix for removing a quad hash entry when the corresponding quad hash entry hasn't been added, which is the case in loopback connections Signed-off-by:
Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by:
Faisal Latif <faisal.latif@intel.com> Signed-off-by:
-
Tatyana Nikolova authored
Fix for checking if the QP associated with a completion has been destroyed while processing CQ elements. If that is the case, move the CQ head to the next element and continue completion processing. Signed-off-by:
-
Shiraz Saleem authored
A check is added to validate the requested sge number. iWARP doesn't support multiple sg elements for RDMA READ work requests. Signed-off-by:
-
Shiraz Saleem authored
Fix to calculate the SQ size based on the max frag_count, requested by the application instead of overwriting it with the max supported frag_count Signed-off-by:
-
Mohammad Khan authored
Fix for filling in the WQE size for NOP Signed-off-by:
-
Chien Tin Tung authored
STag index mask is calculated incorrectly, missing the 14 bits minimum requirement. Add max macro to use either # of MRs or 14 bits in the mask size calculation. Signed-off-by:
-
Shiraz Saleem authored
Invalidation after every WQE write is changed to invalidate only if required. NOPs are padded so that WQE writes are aligned to 64B boundary. Signed-off-by:
-
Ismail, Mustafa authored
Adding sq and rq drain functions, which block until all previously posted wr-s in the specified queue have completed. A completion object is signaled to unblock the thread, when the last cqe for the corresponding queue is processed. Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by:
-
Ismail, Mustafa authored
Correct SD calculation by using base address returned from commit FPM. This alleviates any assumptions on resource ordering and alignment requirement. Also consolidate SD estimation code into i40iw_est_sd(). Signed-off-by:
-
Ismail, Mustafa authored
Fix endian warnings and errors due to u32 stored to u16. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ismail, Mustafa authored
Implement fast register mr, Local invalidate, send with invalidate and RDMA read with invalidate. Signed-off-by:
-
Ismail, Mustafa authored
Initialize max enabled vfs to max rdma vfs instead of 0. Signed-off-by:
-
Ismail, Mustafa authored
Move return code check to immediately after i40iw_hmc_sd_one call where it is set instead of outside the then statement. Signed-off-by:
-
Ismail, Mustafa authored
Queue users of virtual channel on a waitqueue until the channel is clear instead of failing the call when the channel is occupied. Signed-off-by:
-
Ismail, Mustafa authored
Remove unused code and fix warning. Signed-off-by:
-
Ismail, Mustafa authored
Populate PCI info fields from PCI device structure. Signed-off-by:
-
Ismail, Mustafa authored
Add a check for cq_poll_info.error before setting vendor_err instead of always setting it. Signed-off-by:
-
Ismail, Mustafa authored
QP may be freed during Async Event processing. Add a lock around QP table to prevent it. Signed-off-by:
-
Ismail, Mustafa authored
iwqp->allocated_buffer is a self-referencing pointer to iwqp. Do not set iwqp->allocated_buffer to NULL after freeing it. Signed-off-by:
-
Ismail, Mustafa authored
Fix to correct max reported message size in query port. Signed-off-by:
-
Ismail, Mustafa authored
Make sure cm_node is setup before sending SYN packet and ORD/IRD negotiation. Signed-off-by:
-
Ismail, Mustafa authored
Include inline data size as part of SQ size calculation. RQ size calculation uses only number of SGEs and does not support 96 byte WQE size. Signed-off-by:
-
Ismail, Mustafa authored
Change region_length to u64 as a region can be > 4GB. Signed-off-by:
-
Jubin John authored
hrtimer functions do not guarantee serialization, so we extend the cca_timer_lock to cover the hrtimer_forward_now() in the hrtimer callback handler and the hrtimer_start() in process_becn(). This prevents races between these 2 functions to update the hrtimer state leading to problems such as: kernel BUG at kernel/hrtimer.c:1282! encountered during validation of the CCA feature. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Jubin John <jubin.john@intel.com> Signed-off-by:
-
Dean Luick authored
A MAD directive to start polling must go through the normal link tuning and start steps in order to correctly handle active cables. Reviewed-by:
Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
Dean Luick <dean.luick@intel.com> Signed-off-by:
-
Dean Luick authored
The code to save the link down reason for reporting to the SMA was in a location before the actual reason was read. Move the SMA link down reason assignment to a better location. Reviewed-by:
-
Dean Luick authored
The 8051 uses a link down reason to inform the driver why the link went down. The neighbor planned link down reason code is only valid when a link down idle message is received by the 8051. Enhance the explanation on why the link went down. Reviewed-by:
-
