Fix the following WARN triggered during Venus driver probe on
5.19.0-rc8-next-20220728:

 WARNING: CPU: 7 PID: 339 at drivers/opp/core.c:2471 dev_pm_opp_set_config+0x49c/0x610
 Modules linked in: qcom_spmi_adc5 rtc_pm8xxx qcom_spmi_adc_tm5 leds_qcom_lpg led_class_multicolor
  qcom_pon qcom_vadc_common venus_core(+) qcom_spmi_temp_alarm v4l2_mem2mem videobuf2_v4l2 msm(+)
  videobuf2_common crct10dif_ce spi_geni_qcom snd_soc_sm8250 i2c_qcom_geni gpu_sched
  snd_soc_qcom_common videodev qcom_q6v5_pas soundwire_qcom drm_dp_aux_bus qcom_stats
  drm_display_helper qcom_pil_info soundwire_bus snd_soc_lpass_va_macro mc qcom_q6v5
  phy_qcom_snps_femto_v2 qcom_rng snd_soc_lpass_macro_common snd_soc_lpass_wsa_macro
  lpass_gfm_sm8250 slimbus qcom_sysmon qcom_common qcom_glink_smem qmi_helpers
  qcom_wdt mdt_loader socinfo icc_osm_l3 display_connector
  drm_kms_helper qnoc_sm8250 drm fuse ip_tables x_tables ipv6
 CPU: 7 PID: 339 Comm: systemd-udevd Not tainted 5.19.0-rc8-next-20220728 #4
 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : dev_pm_opp_set_config+0x49c/0x610
 lr : dev_pm_opp_set_config+0x58/0x610
 sp : ffff8000093c3710
 x29: ffff8000093c3710 x28: ffffbca3959d82b8 x27: ffff8000093c3d00
 x26: ffffbca3959d8e08 x25: ffff4396cac98118 x24: ffff4396c0e24810
 x23: ffff4396c4272c40 x22: ffff4396c0e24810 x21: ffff8000093c3810
 x20: ffff4396cac36800 x19: ffff4396cac96800 x18: 0000000000000000
 x17: 0000000000000003 x16: ffffbca3f4edf198 x15: 0000001cba64a858
 x14: 0000000000000180 x13: 000000000000017e x12: 0000000000000000
 x11: 0000000000000002 x10: 0000000000000a60 x9 : ffff8000093c35c0
 x8 : ffff4396c4273700 x7 : ffff43983efca6c0 x6 : ffff43983efca640
 x5 : 00000000410fd0d0 x4 : ffff4396c4272c40 x3 : ffffbca3f5d1e008
 x2 : 0000000000000000 x1 : ffff4396c2421600 x0 : ffff4396cac96860
 Call trace:
  dev_pm_opp_set_config+0x49c/0x610
  devm_pm_opp_set_config+0x18/0x70
  vcodec_domains_get+0xb8/0x1638 [venus_core]
  core_get_v4+0x1d8/0x218 [venus_core]
  venus_probe+0xf4/0x468 [venus_core]
  platform_probe+0x68/0xd8
  really_probe+0xbc/0x2a8
  __driver_probe_device+0x78/0xe0
  driver_probe_device+0x3c/0xf0
  __driver_attach+0x70/0x120
  bus_for_each_dev+0x70/0xc0
  driver_attach+0x24/0x30
  bus_add_driver+0x150/0x200
  driver_register+0x64/0x120
  __platform_driver_register+0x28/0x38
  qcom_venus_driver_init+0x24/0x1000 [venus_core]
  do_one_initcall+0x54/0x1c8
  do_init_module+0x44/0x1d0
  load_module+0x16c8/0x1aa0
  __do_sys_finit_module+0xbc/0x110
  __arm64_sys_finit_module+0x20/0x30
  invoke_syscall+0x44/0x108
  el0_svc_common.constprop.0+0xcc/0xf0
  do_el0_svc+0x2c/0xb8
  el0_svc+0x2c/0x88
  el0t_64_sync_handler+0xb8/0xc0
  el0t_64_sync+0x18c/0x190
  qcom-venus: probe of aa00000.video-codec failed with error -16

The fix is re-ordering the code related to OPP core. The OPP core
expects all configuration options to be provided before the OPP
table is added.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The struct dev_pm_opp contains a reference of the DT node, opp->np,
throughout its lifetime. We should increase the refcount for the same
from _opp_add_static_v2(), and drop it while removing the OPP finally.
Signed-off-by: Liang He <windhl@126.com>
[ Viresh: Updated subject / commit log, create _of_clear_opp() and drop
	  reference from it]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The OPP table contains a reference of the DT node, opp_table->np,
throughout its lifetime. We shouldn't drop the refcount for the same
from _of_init_opp_table(), but do that while removing the OPP table
finally.
Signed-off-by: Liang He <windhl@126.com>
[ Viresh: Updated subject / commit log and drop reference from
	  _of_clear_opp_table() ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Remove the now unused variants and the now unnecessary "getclk"
parameter from few routines.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

There is a corner case with Tegra30, where we want to skip clk
configuration that happens via dev_pm_opp_set_opp(), but still want the
OPP core to read the "opp-hz" property so we can find the right OPP via
freq finding helpers.

The OPP core provides support for the platforms to provide config_clks
helpers now, lets use that instead of devm_pm_opp_of_add_table_noclk()
to achieve the same result, as the OPP core won't parse the DT's
"opp-hz" property anymore if the clock isn't provided.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

There is a corner case with Tegra30, where we want to skip clk
configuration via dev_pm_opp_set_opp(), but still want the OPP core to
read the "opp-hz" property so we can find the right OPP via freq finding
helpers.

This is the easiest of the ways to make it work, without any special
hacks in the OPP core. Allow config_clks to be passed for single clk
case.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

This provides a simple implementation to configure multiple clocks for a
device.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Many helpers can be safely called only for devices that have a single
clk associated with them. Assert the same for those routines.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The helpers for the clock key, at least, would need to assert that the
helpers are called only for single clock case. Prepare for that by
adding an argument to the key finding helpers.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Replicate the same behavior as "rates" here and compare all values
instead of relying on the first entry alone.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

This patch adds support to allow multiple clocks for a device.

The design is pretty much similar to how this is done for regulators,
and platforms can supply their own version of the config_clks() callback
if they have multiple clocks for their device. The core manages the
calls via opp_table->config_clks() eventually.

We have kept both "clk" and "clks" fields in the OPP table structure and
the reason is provided as a comment in _opp_set_clknames(). The same
isn't done for "rates" though and we use rates[0] at most of the places
now.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Devices might need to control several clocks when scaling the frequency
and voltage.  Allow passing array of clock frequencies, similarly to the
voltages.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

dev_pm_opp_set_opp() can be called for any device, it may or may not
have a frequency value associated with it.

If a frequency value isn't available, we pass 0 to _set_opp(). Make it
optional instead by making _set_opp() accept a pointer instead, as the
frequency value is anyway available in the OPP. This makes
dev_pm_opp_set_opp() and _set_opp() completely independent of any
special key value.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Reuse _opp_compare_key() in _opp_add_static_v2() instead of just
comparing frequency while finding suspend frequency. Also add a comment
over _opp_compare_key() explaining its return values.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

commit 32715be4 ("opp: Fix adding OPP entries in a wrong order if
rate is unavailable") removed the only user of this field, get rid of
rest of it now.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The OPP table is called "opp_table" at most of the places and "table" at
few. Make all of them follow the same naming convention, "opp_table".
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Use the recently added generic key findings helpers to find bandwidth
key values.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Use the recently added generic key findings helpers to find level key
values.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

There are three type of helpers, to find exact, ceil, and floor values,
replicated for multiple key types, freq, level, bw. And all of these
helpers share a lot of boilerplate code.

Add generic key finding helpers to reduce code redundancy.

Also update the freq finder helpers to use the new infrastructure.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

This was added few years back, but the code that was supposed to use it
never got merged. Remove the unused helper.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The only user of the custom helper is migrated to use
dev_pm_opp_set_config_regulators() interface. Remove the now unused
custom OPP helper support.

This cleans up _set_opp() and leaves a single code path to be used by
all users.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The OPP core now provides dev_pm_opp_set_config_regulators() interface,
which needs the platforms to just set the OPP voltages instead of both
clk and voltage.  The clock is set by the OPP core instead and hence
reduces code redundancy.

Migrate the only user of the custom set_opp() to
dev_pm_opp_set_config_regulators().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

We already have an API for getting voltage information for a single
regulator, dev_pm_opp_get_voltage(), but there is nothing available for
multiple regulator case.

This patch adds a new API, dev_pm_opp_get_supplies(), to get all
information related to the supplies for an OPP.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

In order to reuse the same code path, i.e. clk_set_rate() from
_set_opp(), migrate _generic_set_opp_regulator() to implement a
config_regulators() interface.

It is renamed to _opp_config_regulator_single() and is set as the
preferred config_regulators() interface whenever we have a single
regulator available.

Note that this also drops code responsible for restoring the
voltage/freq in case of errors. We aren't handling that properly
currently, restoring only some of the resources while leaving others out
(like bandwidth and required OPPs). It is better to drop all of it
instead of partial restoration.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Extend the dev_pm_opp_set_config() interface to allow adding
config_regulators() helpers. This helper will be called to set the
voltages of the regulators from the regular path in _set_opp(), while we
are trying to change the OPP.

This will eventually replace the custom set_opp() helper.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Now that we have a central API to handle all OPP table configurations,
migrate the set-prop-name family of helpers to use the new
infrastructure.

The return type and parameter to the APIs change a bit due to this,
update the current users as well in the same commit in order to avoid
breaking builds.

Acked-by: Samuel Holland <samuel@sholland.org> # sun50i
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Now that we have a central API to handle all OPP table configurations,
migrate the attach-genpd family of helpers to use the new
infrastructure.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Now that we have a central API to handle all OPP table configurations,
migrate the set-opp-helper family of helpers to use the new
infrastructure.

The return type and parameter to the APIs change a bit due to this,
update the current users as well in the same commit in order to avoid
breaking builds.

Remove devm_pm_opp_register_set_opp_helper() as it has no users
currently.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Now that we have a central API to handle all OPP table configurations,
migrate the set-clk-name family of helpers to use the new
infrastructure.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Now that we have a central API to handle all OPP table configurations,
migrate the set-supported-hw family of helpers to use the new
infrastructure.

The return type and parameter to the APIs change a bit due to this,
update the current users as well in the same commit in order to avoid
breaking builds.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Now that we have a central API to handle all OPP table configurations,
migrate the set-regulators family of helpers to use the new
infrastructure.

The return type and parameter to the APIs change a bit due to this,
update the current users as well in the same commit in order to avoid
breaking builds.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The OPP core now provides a unified API for setting all configuration
types, i.e. dev_pm_opp_set_config().

Lets start using it.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Explain why special handling was required here, it isn't obvious at all.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The OPP core now provides a unified API for setting all configuration
types, i.e. dev_pm_opp_set_config().

Lets start using it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The OPP core now provides a unified API for setting all configuration
types, i.e. dev_pm_opp_set_config().

Lets start using it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The OPP core now provides a unified API for setting all configuration
types, i.e. dev_pm_opp_set_config().

Lets start using it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The OPP core now provides a unified API for setting all configuration
types, i.e. dev_pm_opp_set_config().

Lets start using it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The OPP core already have few configuration specific APIs and it is
getting complex or messy for both the OPP core and its users.

Lets introduce a new set of API which will be used for all kind of
different configurations, and shall eventually be used by all the
existing ones.

The new API, returns a unique token instead of a pointer to the OPP
table, which allows the OPP core to drop the resources selectively later
on.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Make dev_pm_opp_set_regulators() accept a NULL terminated list of names
instead of making the callers keep the two parameters in sync, which
creates an opportunity for bugs to get in.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Steven Price <steven.price@arm.com> # panfrost
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Track if the clock name is configured by the platform or not. This is a
preparatory change and will be used by later commits. This also makes
the behavior of the clkname API similar to other ones, which allow
repeated calls to the same API for each CPU.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>