- 14 Mar, 2020 4 commits
-
-
Megha Dey authored
Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel) gets populated only when DMA remapping is enabled (dmar_disabled = 0) irrespective of whether interrupt remapping is enabled or not. Instead, populate the intel iommu debugfs directory if any IOMMUs are detected. Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: ee2636b8 ("iommu/vt-d: Enable base Intel IOMMU debugfs support") Signed-off-by: Megha Dey <megha.dey@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Suravee Suthikulpanit authored
Commit b9c6ff94 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code") accidentally left out the ir_data pointer when calling modity_irte_ga(), which causes the function amd_iommu_update_ga() to return prematurely due to struct amd_ir_data.ref is NULL and the "is_run" bit of IRTE does not get updated properly. This results in bad I/O performance since IOMMU AVIC always generate GA Log entry and notify IOMMU driver and KVM when it receives interrupt from the PCI pass-through device instead of directly inject interrupt to the vCPU. Fixes by passing ir_data when calling modify_irte_ga() as done previously. Fixes: b9c6ff94 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Daniel Drake authored
VMD subdevices are created with a PCI domain ID of 0x10000 or higher. These subdevices are also handled like all other PCI devices by dmar_pci_bus_notifier(). However, when dmar_alloc_pci_notify_info() take records of such devices, it will truncate the domain ID to a u16 value (in info->seg). The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if it is 0000:00:02.0. In the unlucky event that a real device also exists at 0000:00:02.0 and also has a device-specific entry in the DMAR table, dmar_insert_dev_scope() will crash on: BUG_ON(i >= devices_cnt); That's basically a sanity check that only one PCI device matches a single DMAR entry; in this case we seem to have two matching devices. Fix this by ignoring devices that have a domain number higher than what can be looked up in the DMAR table. This problem was carefully diagnosed by Jian-Hong Pan. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Daniel Drake <drake@endlessm.com> Fixes: 59ce0515 ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens") Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Zhenzhong Duan authored
When base address in RHSA structure doesn't match base address in each DRHD structure, the base address in last DRHD is printed out. This doesn't make sense when there are multiple DRHD units, fix it by printing the buggy RHSA's base address. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Fixes: fd0c8894 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
- 13 Mar, 2020 4 commits
-
-
Megha Dey authored
Commit 6825d3ea ("iommu/vt-d: Add debugfs support to show register contents") dumps the register contents for all IOMMU devices. Currently, a 64 bit read(dmar_readq) is done for all the IOMMU registers, even though some of the registers are 32 bits, which is incorrect. Use the correct read function variant (dmar_readl/dmar_readq) while reading the contents of 32/64 bit registers respectively. Signed-off-by: Megha Dey <megha.dey@linux.intel.com> Link: https://lore.kernel.org/r/1583784587-26126-2-git-send-email-megha.dey@linux.intel.comAcked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Hans de Goede authored
Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Fixes: 556ab45f ("ioat2: catch and recover from broken vtd configurations v6") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200309182510.373875-1-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=701847Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Hans de Goede authored
Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in dmar_parse_one_rmrr + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") call, with a pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) call avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: f5a68bb0 ("iommu/vt-d: Mark firmware tainted if RMRR fails sanity check") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Cc: Barret Rhoden <brho@google.com> Link: https://lore.kernel.org/r/20200309140138.3753-3-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1808874
-
Hans de Goede authored
Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in warn_invalid_dmar() + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") calls, with pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) calls avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: fd0c8894 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Fixes: e625b4a9 ("iommu/vt-d: Parse ANDD records") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200309140138.3753-2-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1564895
-
- 10 Mar, 2020 2 commits
-
-
Qian Cai authored
Similar to the commit 02d715b4 ("iommu/vt-d: Fix RCU list debugging warnings"), there are several other places that call list_for_each_entry_rcu() outside of an RCU read side critical section but with dmar_global_lock held. Silence those false positives as well. drivers/iommu/intel-iommu.c:4288 RCU-list traversed in non-reader section!! 1 lock held by swapper/0/1: #0: ffffffff935892c8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1ad/0xb97 drivers/iommu/dmar.c:366 RCU-list traversed in non-reader section!! 1 lock held by swapper/0/1: #0: ffffffff935892c8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x125/0xb97 drivers/iommu/intel-iommu.c:5057 RCU-list traversed in non-reader section!! 1 lock held by swapper/0/1: #0: ffffffffa71892c8 (dmar_global_lock){++++}, at: intel_iommu_init+0x61a/0xb13 Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Qian Cai authored
There are several places traverse RCU-list without holding any lock in intel_iommu_init(). Fix them by acquiring dmar_global_lock. WARNING: suspicious RCU usage ----------------------------- drivers/iommu/intel-iommu.c:5216 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by swapper/0/1. Call Trace: dump_stack+0xa0/0xea lockdep_rcu_suspicious+0x102/0x10b intel_iommu_init+0x947/0xb13 pci_iommu_init+0x26/0x62 do_one_initcall+0xfe/0x500 kernel_init_freeable+0x45a/0x4f8 kernel_init+0x11/0x139 ret_from_fork+0x3a/0x50 DMAR: Intel(R) Virtualization Technology for Directed I/O Fixes: d8190dc6 ("iommu/vt-d: Enable DMA remapping after rmrr mapped") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
- 04 Mar, 2020 1 commit
-
-
Marc Zyngier authored
The way cookie_init_hw_msi_region() allocates the iommu_dma_msi_page structures doesn't match the way iommu_put_dma_cookie() frees them. The former performs a single allocation of all the required structures, while the latter tries to free them one at a time. It doesn't quite work for the main use case (the GICv3 ITS where the range is 64kB) when the base granule size is 4kB. This leads to a nice slab corruption on teardown, which is easily observable by simply creating a VF on a SRIOV-capable device, and tearing it down immediately (no need to even make use of it). Fortunately, this only affects systems where the ITS isn't translated by the SMMU, which are both rare and non-standard. Fix it by allocating iommu_dma_msi_page structures one at a time. Fixes: 7c1b058c ("iommu/dma: Handle IOMMU API reserved regions") Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
- 02 Mar, 2020 3 commits
-
-
Robin Murphy authored
Since we ony support the TTB1 quirk for AArch64 contexts, and consequently only for 64-bit builds, the sign-extension aspect of the "are all bits above IAS consistent?" check should implicitly only apply to 64-bit IOVAs. Change the type of the cast to ensure that 32-bit longs don't inadvertently get sign-extended, and thus considered invalid, if they happen to be above 2GB in the TTB0 region. Reported-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Acked-by: Will Deacon <will@kernel.org> Fixes: db690301 ("iommu/io-pgtable-arm: Prepare for TTBR1 usage") Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Yonghyun Hwang authored
intel_iommu_iova_to_phys() has a bug when it translates an IOVA for a huge page onto its corresponding physical address. This commit fixes the bug by accomodating the level of page entry for the IOVA and adds IOVA's lower address to the physical address. Cc: <stable@vger.kernel.org> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Yonghyun Hwang <yonghyun@google.com> Fixes: 38717946 ("VT-d: Changes to support KVM") Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Amol Grover authored
dmar_drhd_units is traversed using list_for_each_entry_rcu() outside of an RCU read side critical section but under the protection of dmar_global_lock. Hence add corresponding lockdep expression to silence the following false-positive warnings: [ 1.603975] ============================= [ 1.603976] WARNING: suspicious RCU usage [ 1.603977] 5.5.4-stable #17 Not tainted [ 1.603978] ----------------------------- [ 1.603980] drivers/iommu/intel-iommu.c:4769 RCU-list traversed in non-reader section!! [ 1.603869] ============================= [ 1.603870] WARNING: suspicious RCU usage [ 1.603872] 5.5.4-stable #17 Not tainted [ 1.603874] ----------------------------- [ 1.603875] drivers/iommu/dmar.c:293 RCU-list traversed in non-reader section!! Tested-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: Amol Grover <frextrite@gmail.com> Cc: stable@vger.kernel.org Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
- 01 Mar, 2020 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Two more bug fixes (including a regression) for 5.6" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() jbd2: fix data races at struct journal_head
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "More bugfixes, including a few remaining "make W=1" issues such as too large frame sizes on some configurations. On the ARM side, the compiler was messing up shadow stacks between EL1 and EL2 code, which is easily fixed with __always_inline" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: check descriptor table exits on instruction emulation kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter arm64: Ask the compiler to __always_inline functions used by KVM at HYP KVM: arm64: Define our own swab32() to avoid a uapi static inline KVM: arm64: Ask the compiler to __always_inline functions used at HYP kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe() KVM: arm/arm64: Fix up includes for trace.h
-
Oliver Upton authored
KVM emulates UMIP on hardware that doesn't support it by setting the 'descriptor table exiting' VM-execution control and performing instruction emulation. When running nested, this emulation is broken as KVM refuses to emulate L2 instructions by default. Correct this regression by allowing the emulation of descriptor table instructions if L1 hasn't requested 'descriptor table exiting'. Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Reported-by: Jan Kiszka <jan.kiszka@web.de> Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has three driver bugfixes for you. We agreed on the Mac regression to go in via I2C" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: macintosh: therm_windtunnel: fix regression when instantiating devices i2c: altera: Fix potential integer overflow i2c: jz4780: silence log flood on txabrt
-
- 29 Feb, 2020 4 commits
-
-
Dan Carpenter authored
If sbi->s_flex_groups_allocated is zero and the first allocation fails then this code will crash. The problem is that "i--" will set "i" to -1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1 is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX is more than zero, the condition is true so we call kvfree(new_groups[-1]). The loop will carry on freeing invalid memory until it crashes. Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access") Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Wolfram Sang authored
Removing attach_adapter from this driver caused a regression for at least some machines. Those machines had the sensors described in their DT, too, so they didn't need manual creation of the sensor devices. The old code worked, though, because manual creation came first. Creation of DT devices then failed later and caused error logs, but the sensors worked nonetheless because of the manually created devices. When removing attach_adaper, manual creation now comes later and loses the race. The sensor devices were already registered via DT, yet with another binding, so the driver could not be bound to it. This fix refactors the code to remove the race and only manually creates devices if there are no DT nodes present. Also, the DT binding is updated to match both, the DT and manually created devices. Because we don't know which device creation will be used at runtime, the code to start the kthread is moved to do_probe() which will be called by both methods. Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by: Erhard Furtner <erhard_f@mailbox.org> Tested-by: Erhard Furtner <erhard_f@mailbox.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org # v4.19+
-
Qian Cai authored
journal_head::b_transaction and journal_head::b_next_transaction could be accessed concurrently as noticed by KCSAN, LTP: starting fsync04 /dev/zero: Can't open blockdev EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) ================================================================== BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2] write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70: __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2] __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569 jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2] (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034 kjournald2+0x13b/0x450 [jbd2] kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68: jbd2_write_access_granted+0x1b2/0x250 [jbd2] jbd2_write_access_granted at fs/jbd2/transaction.c:1155 jbd2_journal_get_write_access+0x2c/0x60 [jbd2] __ext4_journal_get_write_access+0x50/0x90 [ext4] ext4_mb_mark_diskspace_used+0x158/0x620 [ext4] ext4_mb_new_blocks+0x54f/0xca0 [ext4] ext4_ind_map_blocks+0xc79/0x1b40 [ext4] ext4_map_blocks+0x3b4/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block+0x3b/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe 5 locks held by fsync04/25724: #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260 #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4] #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4] #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2] irq event stamp: 1407125 hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 The plain reads are outside of jh->b_state_lock critical section which result in data races. Fix them by adding pairs of READ|WRITE_ONCE(). Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four small fixes. Three are in drivers for fairly obvious bugs. The fourth is a set of regressions introduced by the compat_ioctl changes because some of the compat updates wrongly replaced .ioctl instead of .compat_ioctl" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places scsi: zfcp: fix wrong data and display format of SFP+ temperature scsi: sd_sbc: Fix sd_zbc_report_zones() scsi: libfc: free response frame from GPN_ID
-
- 28 Feb, 2020 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Fix build issue on 32-bit ARM with old compilers (Marek Szyprowski) - Update MAINTAINERS for recent Cadence driver file move (Lukas Bulwahn) * tag 'pci-v5.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Correct Cadence PCI driver path PCI: brcmstb: Fix build on 32bit ARM platforms with older compilers
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Passthrough insertion fix (Ming) - Kill off some unused arguments (John) - blktrace RCU fix (Jan) - Dead fields removal for null_blk (Dongli) - NVMe polled IO fix (Bijan) * tag 'block-5.6-2020-02-28' of git://git.kernel.dk/linux-block: nvme-pci: Hold cq_poll_lock while completing CQEs blk-mq: Remove some unused function arguments null_blk: remove unused fields in 'nullb_cmd' blktrace: Protect q->blk_trace with RCU blk-mq: insert passthrough request into hctx->dispatch directly
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Fix for a race with IOPOLL used with SQPOLL (Xiaoguang) - Only show ->fdinfo if procfs is enabled (Tobias) - Fix for a chain with multiple personalities in the SQEs - Fix for a missing free of personality idr on exit - Removal of the spin-for-work optimization - Fix for next work lookup on request completion - Fix for non-vec read/write result progation in case of links - Fix for a fileset references on switch - Fix for a recvmsg/sendmsg 32-bit compatability mode * tag 'io_uring-5.6-2020-02-28' of git://git.kernel.dk/linux-block: io_uring: fix 32-bit compatability with sendmsg/recvmsg io_uring: define and set show_fdinfo only if procfs is enabled io_uring: drop file set ref put/get on switch io_uring: import_single_range() returns 0/-ERROR io_uring: pick up link work on submit reference drop io-wq: ensure work->task_pid is cleared on init io-wq: remove spin-for-work optimization io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL io_uring: fix personality idr leak io_uring: handle multiple personalities in link chains
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fix from Keith. * 'nvme-5.6-rc4' of git://git.infradead.org/nvme: nvme-pci: Hold cq_poll_lock while completing CQEs
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "Fix a couple of configuration issues in the ACPI watchdog (WDAT) driver (Mika Westerberg) and make it possible to disable that driver at boot time in case it still does not work as expected (Jean Delvare)" * tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: watchdog: Set default timeout in probe ACPI: watchdog: Fix gas->access_width usage ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro ACPI: watchdog: Allow disabling WDAT at boot
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "Fix a recent cpufreq initialization regression (Rafael Wysocki), revert a devfreq commit that made incompatible changes and broke user land on some systems (Orson Zhai), drop a stale reference to a document that has gone away recently (Jonathan Neuschäfer), and fix a typo in a hibernation code comment (Alexandre Belloni)" * tag 'pm-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Fix policy initialization for internal governor drivers Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs" PM / hibernate: fix typo "reserverd_size" -> "reserved_size" Documentation: power: Drop reference to interface.rst
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fixes from Damien Le Moal: "Two fixes in here: - Revert the initial decision to silently ignore IOCB_NOWAIT for asynchronous direct IOs to sequential zone files. Instead, return an error to the user to signal that the feature is not supported (from Christoph) - A fix to zonefs Kconfig to select FS_IOMAP to avoid build failures if no other file system already selected this option (from Johannes)" * tag 'zonefs-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: select FS_IOMAP zonefs: fix IOCB_NOWAIT handling
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.6, take #1 - Fix compilation on 32bit - Move VHE guest entry/exit into the VHE-specific entry code - Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
-
Erwan Velu authored
In older version of systemd(219), at boot time, udevadm is called with : /usr/bin/udevadm trigger --type=devices --action=add" This program generates an echo "add" in /sys/devices/system/cpu/cpu<x>/uevent, leading to the "kvm: disabled by bios" message in case of your Bios disabled the virtualization extensions. On a modern system running up to 256 CPU threads, this pollutes the Kernel logs. This patch offers to ratelimit this message to avoid any userspace program triggering this uevent printing this message too often. This patch is only a workaround but greatly reduce the pollution without breaking the current behavior of printing a message if some try to instantiate KVM on a system that doesn't support it. Note that recent versions of systemd (>239) do not have trigger this behavior. This patch will be useful at least for some using older systemd with recent Kernels. Signed-off-by: Erwan Velu <e.velu@criteo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Rafael J. Wysocki authored
* pm-sleep: PM / hibernate: fix typo "reserverd_size" -> "reserved_size" Documentation: power: Drop reference to interface.rst * pm-devfreq: Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
-
Paolo Bonzini authored
struct cpufreq_policy is quite big and it is not a good idea to allocate one on the stack. Just use cpufreq_cpu_get and cpufreq_cpu_put which is even simpler. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Restrict -Werror to well-tested configurations and allow disabling it via Kconfig. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Valdis Klētnieks authored
Compile error with CONFIG_KVM_INTEL=y and W=1: CC arch/x86/kvm/vmx/vmx.o arch/x86/kvm/vmx/vmx.c:68:32: error: 'vmx_cpu_id' defined but not used [-Werror=unused-const-variable=] 68 | static const struct x86_cpu_id vmx_cpu_id[] = { | ^~~~~~~~~~ cc1: all warnings being treated as errors When building with =y, the MODULE_DEVICE_TABLE macro doesn't generate a reference to the structure (or any code at all). This makes W=1 compiles unhappy. Wrap both in a #ifdef to avoid the issue. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> [Do the same for CONFIG_KVM_AMD. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
Nick Desaulniers Reported: When building with: $ make CC=clang arch/x86/ CFLAGS=-Wframe-larger-than=1000 The following warning is observed: arch/x86/kernel/kvm.c:494:13: warning: stack frame size of 1064 bytes in function 'kvm_send_ipi_mask_allbutself' [-Wframe-larger-than=] static void kvm_send_ipi_mask_allbutself(const struct cpumask *mask, int vector) ^ Debugging with: https://github.com/ClangBuiltLinux/frame-larger-than via: $ python3 frame_larger_than.py arch/x86/kernel/kvm.o \ kvm_send_ipi_mask_allbutself points to the stack allocated `struct cpumask newmask` in `kvm_send_ipi_mask_allbutself`. The size of a `struct cpumask` is potentially large, as it's CONFIG_NR_CPUS divided by BITS_PER_LONG for the target architecture. CONFIG_NR_CPUS for X86_64 can be as high as 8192, making a single instance of a `struct cpumask` 1024 B. This patch fixes it by pre-allocate 1 cpumask variable per cpu and use it for both pv tlb and pv ipis.. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
Introduce some pv check helpers for consistency. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Christian Borntraeger authored
Sparse notices that declaration and implementation do not match: arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: warning: incorrect type in return expression (different address spaces) arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: expected struct kvm_vcpu [noderef] <asn:3> ** arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: got struct kvm_vcpu *[noderef] <asn:3> * Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Even if APICv is disabled at startup, the backing page and ir_list need to be initialized in case they are needed later. The only case in which this can be skipped is for userspace irqchip, and that must be done because avic_init_backing_page dereferences vcpu->arch.apic (which is NULL for userspace irqchip). Tested-by: rmuncrief@humanavance.com Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206579Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-