Skip to content

L
linux
Switch branch/tag
  1. 27 Apr, 2018 13 commits
  3. 26 Apr, 2018 1 commit
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · 25eb0ea7
      David S. Miller authored 
      Daniel Borkmann says:

====================
pull-request: bpf 2018-04-25

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix to clear the percpu metadata_dst that could otherwise carry
   stale ip_tunnel_info, from William.

2) Fix that reduces the number of passes in x64 JIT with regards to
   dead code sanitation to avoid risk of prog rejection, from Gianluca.

3) Several fixes of sockmap programs, besides others, fixing a double
   page_put() in error path, missing refcount hold for pinned sockmap,
   adding required -target bpf for clang in sample Makefile, from John.

4) Fix to disable preemption in __BPF_PROG_RUN_ARRAY() paths, from Roman.

5) Fix tools/bpf/ Makefile with regards to a lex/yacc build error
   seen on older gcc-5, from John.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      25eb0ea7
  5. 25 Apr, 2018 7 commits
    • John Fastabend's avatar
      bpf: fix for lex/yacc build error with gcc-5 · 9c299a32
      John Fastabend authored 
      Fix build error found with Ubuntu shipped gcc-5

~/git/bpf/tools/bpf$ make all

Auto-detecting system features:
...                        libbfd: [ OFF ]
...        disassembler-four-args: [ OFF ]

  CC       bpf_jit_disasm.o
  LINK     bpf_jit_disasm
  CC       bpf_dbg.o
/home/john/git/bpf/tools/bpf/bpf_dbg.c: In function ‘cmd_load’:
/home/john/git/bpf/tools/bpf/bpf_dbg.c:1077:13: warning: ‘cont’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  } else if (matches(subcmd, "pcap") == 0) {
             ^
  LINK     bpf_dbg
  CC       bpf_asm.o
make: *** No rule to make target `bpf_exp.yacc.o', needed by `bpf_asm'.  Stop.

Fixes: 5a8997f2 ("tools: bpf: respect output directory during build")
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      9c299a32
    • Dag Moxnes's avatar
      rds: ib: Fix missing call to rds_ib_dev_put in rds_ib_setup_qp · 91a82529
      Dag Moxnes authored 
      The function rds_ib_setup_qp is calling rds_ib_get_client_data and
should correspondingly call rds_ib_dev_put. This call was lost in
the non-error path with the introduction of error handling done in
commit 3b12f73a ("rds: ib: add error handle")
Signed-off-by: default avatarDag Moxnes <dag.moxnes@oracle.com>
Reviewed-by: default avatarHåkon Bugge <haakon.bugge@oracle.com>
Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91a82529
    • Ursula Braun's avatar
      net/smc: keep clcsock reference in smc_tcp_listen_work() · 070204a3
      Ursula Braun authored 
      The internal CLC socket should exist till the SMC-socket is released.
Function tcp_listen_worker() releases the internal CLC socket of a
listen socket, if an smc_close_active() is called. This function
is called for the final release(), but it is called for shutdown
SHUT_RDWR as well. This opens a door for protection faults, if
socket calls using the internal CLC socket are called for a
shutdown listen socket.

With the changes of
commit 3d502067 ("net/smc: simplify wait when closing listen socket")
there is no need anymore to release the internal CLC socket in
function tcp_listen_worker((). It is sufficient to release it in
smc_release().

Fixes: 127f4970 ("net/smc: release clcsock from tcp_listen_worker")
Signed-off-by: default avatarUrsula Braun <ubraun@linux.ibm.com>
Reported-by: syzbot+9045fc589fcd196ef522@syzkaller.appspotmail.com
Reported-by: syzbot+28a2c86cf19c81d871fa@syzkaller.appspotmail.com
Reported-by: syzbot+9605e6cace1b5efd4a0a@syzkaller.appspotmail.com
Reported-by: syzbot+cf9012c597c8379d535c@syzkaller.appspotmail.com
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      070204a3
    • Alexandre Belloni's avatar
      net: phy: allow scanning busses with missing phys · 02a6efca
      Alexandre Belloni authored 
      Some MDIO busses will error out when trying to read a phy address with no
phy present at that address. In that case, probing the bus will fail
because __mdiobus_register() is scanning the bus for all possible phys
addresses.

In case MII_PHYSID1 returns -EIO or -ENODEV, consider there is no phy at
this address and set the phy ID to 0xffffffff which is then properly
handled in get_phy_device().
Suggested-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      02a6efca
    • Gianluca Borello's avatar
      bpf, x64: fix JIT emission for dead code · 1612a981
      Gianluca Borello authored 
      Commit 2a5418a1 ("bpf: improve dead code sanitizing") replaced dead
code with a series of ja-1 instructions, for safety. That made JIT
compilation much more complex for some BPF programs. One instance of such
programs is, for example:

bool flag = false
...
/* A bunch of other code */
...
if (flag)
        do_something()

In some cases llvm is not able to remove at compile time the code for
do_something(), so the generated BPF program ends up with a large amount
of dead instructions. In one specific real life example, there are two
series of ~500 and ~1000 dead instructions in the program. When the
verifier replaces them with a series of ja-1 instructions, it causes an
interesting behavior at JIT time.

During the first pass, since all the instructions are estimated at 64
bytes, the ja-1 instructions end up being translated as 5 bytes JMP
instructions (0xE9), since the jump offsets become increasingly large (>
127) as each instruction gets discovered to be 5 bytes instead of the
estimated 64.

Starting from the second pass, the first N instructions of the ja-1
sequence get translated into 2 bytes JMPs (0xEB) because the jump offsets
become <= 127 this time. In particular, N is defined as roughly 127 / (5
- 2) ~= 42. So, each further pass will make the subsequent N JMP
instructions shrink from 5 to 2 bytes, making the image shrink every time.
This means that in order to have the entire program converge, there need
to be, in the real example above, at least ~1000 / 42 ~= 24 passes just
for translating the dead code. If we add this number to the passes needed
to translate the other non dead code, it brings such program to 40+
passes, and JIT doesn't complete. Ultimately the userspace loader fails
because such BPF program was supposed to be part of a prog array owner
being JITed.

While it is certainly possible to try to refactor such programs to help
the compiler remove dead code, the behavior is not really intuitive and it
puts further burden on the BPF developer who is not expecting such
behavior. To make things worse, such programs are working just fine in all
the kernel releases prior to the ja-1 fix.

A possible approach to mitigate this behavior consists into noticing that
for ja-1 instructions we don't really need to rely on the estimated size
of the previous and current instructions, we know that a -1 BPF jump
offset can be safely translated into a 0xEB instruction with a jump offset
of -2.

Such fix brings the BPF program in the previous example to complete again
in ~9 passes.

Fixes: 2a5418a1 ("bpf: improve dead code sanitizing")
Signed-off-by: default avatarGianluca Borello <g.borello@gmail.com>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      1612a981
    • William Tu's avatar
      bpf: clear the ip_tunnel_info. · 5540fbf4
      William Tu authored 
      The percpu metadata_dst might carry the stale ip_tunnel_info
and cause incorrect behavior.  When mixing tests using ipv4/ipv6
bpf vxlan and geneve tunnel, the ipv6 tunnel info incorrectly uses
ipv4's src ip addr as its ipv6 src address, because the previous
tunnel info does not clean up.  The patch zeros the fields in
ip_tunnel_info.
Signed-off-by: default avatarWilliam Tu <u9012063@gmail.com>
Reported-by: default avatarYifeng Sun <pkusunyifeng@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      5540fbf4
    • Linus Torvalds's avatar
      Merge branch 'userns-linus' of... · 3be4aaf4
      Linus Torvalds authored 
      Merge branch 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull userns bug fix from Eric Biederman:
 "Just a small fix to properly set the return code on error"

* 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  commoncap: Handle memory allocation failure.
      3be4aaf4
  7. 24 Apr, 2018 19 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7