- 23 Feb, 2019 14 commits
-
-
Shalom Toledo authored
80 columns wrapping change in mlxsw_reg_ptys_eth_unpack function. Signed-off-by:
Shalom Toledo <shalomt@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shalom Toledo authored
Rename p_eth_proto_adm to p_eth_proto_admin in mlxsw_reg_ptys_eth_unpack function. Signed-off-by:
-
Shalom Toledo authored
Add port type-speed operations in order to have different operations for different ASICs. For now, both ASICs use the same pointer. Signed-off-by:
-
Shalom Toledo authored
Rename port speed-type functions to be Spectrum-1 ASIC specific. Signed-off-by:
-
Shalom Toledo authored
Instead of deriving the port connector type from port admin state, query it from firmware. Signed-off-by:
-
Shalom Toledo authored
Remove eth_proto_lp_advertise field in PTYS register since it is not supported by the firmware. Signed-off-by:
-
Shalom Toledo authored
Remove duplicate port link mode entry from mlxsw_sp_port_link_mode. Signed-off-by:
-
YueHaibing authored
There has check NULL on kmem_cache_create on failure in kcm_init, no need use SLAB_PANIC to panic the system. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== -Wformat fixes This is a collection of some -Wformat fixes found during build, nothing critical, but nice to have for people turning on more warnings with their builds. ==================== Signed-off-by: -
Florian Fainelli authored
Provide a precision hint to snprintf() in order to eliminate a -Wformat-truncation warning provided below. A maximum of 11 characters is allowed to reach a maximum of 32 - 1 characters given a possible maximum value of queues using up to UINT_MAX which occupies 10 characters. Incidentally 11 is the number of characters for "xdp_packets" which is the largest string we append. drivers/net/veth.c: In function 'veth_get_strings': drivers/net/veth.c:118:47: warning: '%s' directive output may be truncated writing up to 31 bytes into a region of size between 12 and 21 [-Wformat-truncation=] snprintf(p, ETH_GSTRING_LEN, "rx_queue_%u_%s", ^~ drivers/net/veth.c:118:5: note: 'snprintf' output between 12 and 52 bytes into a destination of size 32 snprintf(p, ETH_GSTRING_LEN, "rx_queue_%u_%s", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ i, veth_rq_stats_desc[j].desc); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Provide precision hints to snprintf() since we know the destination buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the following warnings: drivers/net/ethernet/intel/e1000e/netdev.c: In function 'e1000_request_msix': drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-rx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->rx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->rx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-rx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-tx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->tx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->tx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-tx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Florian Fainelli authored
We are not specifying an explicit format argument but instead passing a string litteral which causes these two warnings to show up: drivers/net/dsa/mv88e6xxx/chip.c: In function 'mv88e6xxx_irq_poll_setup': drivers/net/dsa/mv88e6xxx/chip.c:483:2: warning: format not a string literal and no format arguments [-Wformat-security] chip->kworker = kthread_create_worker(0, dev_name(chip->dev)); ^~~~ drivers/net/dsa/mv88e6xxx/ptp.c: In function 'mv88e6xxx_ptp_setup': drivers/net/dsa/mv88e6xxx/ptp.c:403:4: warning: format not a string literal and no format arguments [-Wformat-security] dev_name(chip->dev)); ^~~~~~~~ LD [M] drivers/net/dsa/mv88e6xxx/mv88e6xxx.o Signed-off-by:Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Florian Fainelli authored
Give precision identifiers to the two snprintf() formatting the priority and TC strings to avoid producing these two warnings: drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_prio_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:37: warning: '%d' directive output may be truncated writing between 1 and 3 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:3: note: 'snprintf' output between 3 and 36 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_prio_stats[i].str, prio); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_tc_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:37: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:3: note: 'snprintf' output between 3 and 44 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_tc_stats[i].str, tc); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Masahiro Yamada authored
I thought header search paths to tools/include(/uapi) were unneeded, but it looks like a build error occurs depending on the compiler. Commit 303a339f ("bpfilter: remove extra header search paths for bpfilter_umh") reintroduced the build error fixed by commit ae40832e ("bpfilter: fix a build err"). Apology for the breakage, and thanks to Guenter for reporting this. Fixes: 303a339f ("bpfilter: remove extra header search paths for bpfilter_umh") Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by:
-
- 22 Feb, 2019 26 commits
-
-
David S. Miller authored
Vinod Koul says: ==================== net: phy: at803x: Update delays for RGMII modes Peter[1] reported that patch cd28d1d6: ("net: phy: at803x: Disable phy delay for RGMII mode") caused regression on am335x-evmsk board. This board expects the Phy delay to be enabled but specified RGMII mode which refers to delays being disabled. So fix this by disabling delay only for RGMII mode and enable for RGMII_ID and RGMII_TXID/RXID modes. While at it, as pointed by Dave, don't inline the helpers. [1]: https://www.spinics.net/lists/netdev/msg550749.html Changes in v4: - fix log & comments nbased on Marc's feedback ==================== Signed-off-by:
-
Vinod Koul authored
Per "Documentation/devicetree/bindings/net/ethernet.txt" RGMII mode should not have delay in PHY whereas RGMII_ID and RGMII_RXID/RGMII_TXID can have delay in PHY. So disable the delay only for RGMII mode and enable for other modes. Also treat the default case as disabled delays. Fixes: cd28d1d6: ("net: phy: at803x: Disable phy delay for RGMII mode") Reported-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by:
Niklas Cassel <niklas.cassel@linaro.org> Tested-by:
Peter Ujfalusi <peter.ujflausi@ti.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Vinod Koul authored
Some helpers were declared with the "inline" function specifier. It is preferable to let the compiler pick the right optimizations, so drop the specifier for at803x_disable_rx_delay() and at803x_disable_tx_delay() Reviewed-by:
Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by:
-
Cong Wang authored
For tcindex filter, it is too late to initialize the net pointer in tcf_exts_validate(), as tcf_exts_get_net() requires a non-NULL net pointer. We can just move its initialization into tcf_exts_init(), which just requires an additional parameter. This makes the code in tcindex_alloc_perfect_hash() prettier. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2019-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.1 Most likely the last set of patches for 5.1. WPA3 support to ath10k and qtnfmac. FTM support to iwlwifi and ath10k. And of course other new features and bugfixes. wireless-drivers was merged due to dependency in mt76. Major changes: iwlwifi * HE radiotap * FTM (Fine Timing Measurement) initiator and responder implementation * bump supported firmware API to 46 * VHT extended NSS support * new PCI IDs for 9260 and 22000 series ath10k * change QMI interface to support the new (and backwards incompatible) interface from HL3.1 and used in recent HL2.0 branch firmware releases * support WPA3 with WCN3990 * support for mac80211 airtime fairness based on transmit rate estimation, the firmware needs to support WMI_SERVICE_PEER_STATS to enable this * report transmit airtime to mac80211 with firmwares having WMI_SERVICE_REPORT_AIRTIME feature, this to have more accurate airtime fairness based on real transmit time (instead of just estimated from transmit rate) * support Fine Timing Measurement (FTM) responder role * add dynamic VLAN support with firmware having WMI_SERVICE_PER_PACKET_SW_ENCRYPT * switch to use SPDX license identifiers ath * add new country codes for US brcmfmac * support monitor frames with the hardware/ucode header qtnfmac * enable WPA3 SAE and OWE support mt76 * beacon support for USB devices (mesh+ad-hoc only) rtlwifi * convert to use SPDX license identifiers libertas_tf * get the MAC address before registering the device ==================== Signed-off-by:
-
David S. Miller authored
Maxim Mikityanskiy says: ==================== AF_PACKET transport_offset fix This patch series contains the implementation of the RFC that was posted on this mailing list previously: https://www.spinics.net/lists/netdev/msg541709.html It fixes having incorrect skb->transport_header values in cases when dissect fails. Having correct values set by the kernel fixes mlx5 operation and allows to remove some unnecessary code flows in mlx5. v2 changes: - Rebase against the fresh net-next. - Don't return bool from skb_probe_transport_header (and don't rename the function). - WARN_ON_ONCE and error path in case of GSO without the L4 header. ==================== Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Maxim Mikityanskiy authored
After AF_PACKET is fixed to calculate the transport header offset correctly, trust the value set by the kernel. If the offset wasn't set, it means there is no transport header in the packet. Signed-off-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Maxim Mikityanskiy authored
skb_transport_offset() == 0 is not a special value. The only special value is when skb->transport_header is ~0U, and it's checked by skb_transport_header_was_set(). Signed-off-by:
-
Maxim Mikityanskiy authored
c72219b7 introduced tpacket_set_protocol that parses the Ethernet L2 header and sets skb->protocol if it's unset. It is no longer needed since the introduction of packet_parse_headers. In case of SOCK_RAW and unset skb->protocol, packet_parse_headers asks the driver to tell the protocol number, and it's implemented for all Ethernet devices. As the old function supported only Ethernet, no functionality is lost. Signed-off-by:
-
Maxim Mikityanskiy authored
If a socket was created with socket(AF_PACKET, SOCK_RAW, 0), the protocol number is unavailable. Try to ask the driver to extract it from the L2 header in order for skb_try_probe_transport_header to succeed. Signed-off-by:
-
Maxim Mikityanskiy authored
The previous commit introduced parse_protocol callback which should extract the protocol number from the L2 header. Make all Ethernet devices support it. Signed-off-by:
-
Maxim Mikityanskiy authored
Introduce a new optional header_ops callback called parse_protocol and a wrapper function dev_parse_header_protocol, similar to dev_parse_header. The new callback's purpose is to extract the protocol number from the L2 header, the format of which is known to the driver, but not to the upper layers of the stack. Signed-off-by:
-
Maxim Mikityanskiy authored
If the socket was created with socket(AF_PACKET, SOCK_RAW, 0), skb->protocol will be unset, __skb_flow_dissect() will fail, and skb_probe_transport_header() will fall back to the offset_hint, making the resulting skb_transport_offset incorrect. If, however, there is no transport header in the packet, transport_header shouldn't be set to an arbitrary value. Fix it by leaving the transport offset unset if it couldn't be found, to be explicit rather than to fill it with some wrong value. It changes the behavior, but if some code relied on the old behavior, it would be broken anyway, as the old one is incorrect. Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2019-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have, of note: * the massive patch series for multi-BSSID support, I ended up applying that through a side branch to record some details * CSA improvements * HE (802.11ax) updates to Draft 3.3 * strongly typed element iteration/etc. to make such code more readable - this came up in particular in multi-BSSID * rhashtable conversion patches from Herbert Along, as usual, with various fixes and improvements. ==================== Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: VLAN devices w/ filtering This patch series supports having VLAN devices on top of DSA/switch ports while the switch has VLAN filtering globally turned on (as is the case with Broadcom switches). Whether the switch does global or per-port VLAN filtering, having VLAN entries for these VLAN devices is beneficial. We take care of a few possibly problematic cases: - adding a VLAN device while there is an existing VLAN entry created by a VLAN aware bridge. The entire bridge's VLAN database and not just the specific bridge port is being checked to be safe and conserative - adding a bridge VLAN entry when there is an existing VLAN device created is also not possible because that would lead to the bridge being able to manipulate the VLAN device's VID/attributes under its feet - enslaving a VLAN device into a VLAN aware bridge since that duplicates functionality already offered by the VLAN aware bridge Here are the different test cases that were run to exercise this: ip addr flush dev gphy ip link add dev br0 type bridge echo 1 > /sys/class/net/br0/bridge/vlan_filtering ip link set dev gphy master br0 udhcpc -i br0 vconfig add rgmii_1 100 ifconfig rgmii_1.100 192.168.100.10 ping -c 2 192.168.100.1 vconfig add br0 42 bridge vlan add vid 42 dev gphy bridge vlan add vid 42 dev br0 self ifconfig br0.42 192.168.42.2 ping -c 2 192.168.42.1 ip link del rgmii_1.100 vconfig add rgmii_1 100 ifconfig rgmii_1.100 192.168.100.10 ping -c 2 192.168.100.1 echo 0 > /sys/class/net/br0/bridge/vlan_filtering ping -c 2 192.168.100.1 ip link del rgmii_1.100 echo 1 > /sys/class/net/br0/bridge/vlan_filtering vconfig add rgmii_1 100 brctl addif br0 rgmii_1 bridge vlan add vid 100 dev rgmii_1 vconfig rem rgmii_1.100 bridge vlan add vid 100 dev rgmii_1 vconfig add rgmii_1 100 bridge vlan del vid 100 dev rgmii_1 vconfig add rgmii_1 100 brctl addif br0 rgmii_1.100 ==================== Signed-off-by: -
Florian Fainelli authored
In order to properly support VLAN filtering being enabled/disabled on a bridge, while having other ports being non bridge port members, we need to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make sure the non-bridge ports can continue receiving VLAN tags, even when the switch is globally configured to do ingress/egress VID checking. Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer NULL, we now need to check that in these two functions. We specifically deal with two possibly problematic cases: - creating a bridge VLAN entry while there is an existing VLAN device claiming that same VID - creating a VLAN device while there is an existing bridge VLAN entry with that VID Those are both resolved with returning -EBUSY back to user-space. Signed-off-by: -
Florian Fainelli authored
VLAN devices on top of a DSA network device which is already part of a bridge and with said bridge being VLAN aware should not be allowed to be enslaved into that bridge. For one, this duplicates functionality offered by the VLAN aware bridge which supports tagged and untagged VLAN frames processing and it would make things needlessly complex to e.g.: propagate FDB/MDB accordingly. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/isdn/i4l/isdn_common.c: In function ‘isdn_wildmat’: drivers/isdn/i4l/isdn_common.c:173:5: warning: this statement may fall through [-Wimplicit-fallthrough=] p++; ~^~ drivers/isdn/i4l/isdn_common.c:174:3: note: here default: ^~~~~~~ CC [M] drivers/leds/leds-lp8788.o CC [M] drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/smu10_smumgr.o drivers/isdn/i4l/isdn_common.c: In function ‘isdn_status_callback’: drivers/isdn/i4l/isdn_common.c:729:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (divert_if) ^ drivers/isdn/i4l/isdn_common.c:732:2: note: here default: ^~~~~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Andrew Lunn authored
Use the new PHY driver call to get the PHYs supported features. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Herbert Xu authored
The rhashtable_walk_init function has been obsolete for more than two years. This patch finally converts its last users over to rhashtable_walk_enter and removes it. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Herbert Xu authored
The code in mesh_path_add tries to handle the case where a duplicate entry is added to the rhashtable by doing a lookup after a failed insertion. It also tries to handle races by repeating the insertion should the lookup fail. This is now unnecessary as we have rhashtable API functions that can directly return the mathcing object. Signed-off-by:
-
Johannes Berg authored
Merge net-next to resolve a conflict and to get the mac80211 rhashtable fixes so further patches can be applied on top. Signed-off-by: -
Liad Kaufman authored
Update element names and new fields according to D3.3 of the HE spec. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Johannes Berg authored
Sometimes, we may want to transport higher bandwidth data through vendor events, and in that case sending it multicast is a bad idea. Allow vendor events to be unicast. Signed-off-by: -
Sara Sharon authored
Some buggy APs keep the CSA IE in probes after the channel switch was completed and can silence us for no good reason. Apply quiet mode only from beacons. If there is real channel switch going on, we will see the beacon anyway. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Sara Sharon authored
Currently, due to some buggy APs that continue to include CSA IEs after the switch, we ignore CSA to same channel. However, some other APs may do CSA to self in order to have immediate quiet. Allow it. Do it only for beacons. Signed-off-by:
-
