- 14 Mar, 2013 40 commits
-
-
Guenter Roeck authored
commit f366fccd upstream. We read the chip ID from the chip, use it to determine if the chip ID provided to the driver is correct, and report it if wrong. We should also use the correct chip ID to select supported functionality. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
commit dbd712c2 upstream. Peak attributes were not initialized and cleared correctly. Also, temp2_max is only supported on page 0 and thus does not need to be an array. Signed-off-by:
-
Mark Brown authored
commit 3e78080f upstream. Not having power is a pretty serious error so check that we are able to enable the supply and error out if we can't. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
NeilBrown authored
commit ee0b0244 upstream. When raid1/raid10 needs to fix a read error, it first drains all pending requests by calling freeze_array(). This calls flush_pending_writes() if it needs to sleep, but some writes may be pending in a per-process plug rather than in the per-array request queue. When raid1{,0}_unplug() moves the request from the per-process plug to the per-array request queue (from which flush_pending_writes() can flush them), it needs to wake up freeze_array(), or freeze_array() will never flush them and so it will block forever. So add the requires wake_up() calls. This bug was introduced by commit f54a9d0e for raid1 and a similar commit for RAID10, and so has been present since linux-3.6. As the bug causes a deadlock I believe this fix is suitable for -stable. Reported-by:
Tregaron Bayly <tbayly@bluehost.com> Tested-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
commit 58ebb34c upstream. Create_stripe_zones returns an error slightly differently to raid0_run and to raid0_takeover_*. The error returned used by the second was wrong and an error would result in mddev->private being set to NULL and sooner or later a crash. So never return NULL, return ERR_PTR(err), not NULL from create_stripe_zones. This bug has been present since 2.6.35 so the fix is suitable for any kernel since then. Signed-off-by:
-
NeilBrown authored
commit a6468539 upstream. You cannot resize a RAID0 array (in terms of making the devices bigger), but the code doesn't entirely stop you. So: disable setting of the available size on each device for RAID0 and Linear devices. This must not change as doing so can change the effective layout of data. Make sure that the size that raid0_size() reports is accurate, but rounding devices sizes to chunk sizes. As the device sizes cannot change now, this isn't so important, but it is best to be safe. Without this change: mdadm --grow /dev/md0 -z max mdadm --grow /dev/md0 -Z max then read to the end of the array can cause a BUG in a RAID0 array. These bugs have been present ever since it became possible to resize any device, which is a long time. So the fix is suitable for any -stable kerenl. Signed-off-by:
-
Sebastian Riemer authored
commit bbfa57c0 upstream. If an fsync occurs on a read-only array, we need to send a completion for the IO and may not increment the active IO count. Otherwise, we hit a bug trace and can't stop the MD array anymore. By advice of Christoph Hellwig we return success upon a flush request but we return -EROFS for other writes. We detect flush requests by checking if the bio has zero sectors. This patch is suitable to any -stable kernel to which it applies. Signed-off-by:
Sebastian Riemer <sebastian.riemer@profitbricks.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: NeilBrown <neilb@suse.de> Reported-by:
Ben Hutchings <ben@decadent.org.uk> Acked-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
-
Frederic Weisbecker authored
commit e5ab012c upstream. As it stands, irq_exit() may or may not be called with irqs disabled, depending on __ARCH_IRQ_EXIT_IRQS_DISABLED that the arch can define. It makes tick_nohz_irq_exit() unsafe. For example two interrupts can race in tick_nohz_stop_sched_tick(): the inner most one computes the expiring time on top of the timer list, then it's interrupted right before reprogramming the clock. The new interrupt enqueues a new timer list timer, it reprogram the clock to take it into account and it exits. The CPUs resumes the inner most interrupt and performs the clock reprogramming without considering the new timer list timer. This regression has been introduced by: 280f0677 ("nohz: Separate out irq exit and idle loop dyntick logic") Let's fix it right now with the appropriate protections. A saner long term solution will be to remove __ARCH_IRQ_EXIT_IRQS_DISABLED and mandate that irq_exit() is called with interrupts disabled. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Link: http://lkml.kernel.org/r/1361373336-11337-1-git-send-email-fweisbec@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Kees Cook authored
commit e70ab977 upstream. While PROC_CN_MCAST_LISTEN/IGNORE is entirely advisory, it was possible for an unprivileged user to turn off notifications for all listeners by sending PROC_CN_MCAST_IGNORE. Instead, require the same privileges as required for a multicast bind. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Matt Helsley <matthltc@us.ibm.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Acked-by:
Matt Helsley <matthltc@us.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Felix Fietkau authored
commit 3412f2f0 upstream. On many different chips, important aspects of the MAC state are not fully cleared by a warm reset. This can show up as tx/rx hangs, those annoying "DMA failed to stop in 10 ms..." messages or other quirks. On AR933x, the chip can occasionally get stuck in a way that only a driver unload/reload or a reboot would bring it back to life. With this patch, a full reset is issued when bringing the chip out of FULL-SLEEP state (after idle), or if either Rx or Tx was not shut down properly. This makes the DMA related error messages disappear completely in my tests on AR933x, and the chip does not get stuck anymore. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Felix Fietkau authored
commit 838f4279 upstream. The ath9k commit 2ef16755 (ath9k: fix signal strength reporting issues) fixed an issue where the reported per-frame signal strength reported to mac80211 was being overwritten with an internal average. The same issue is also present in ath9k_htc. In addition to preventing the driver from overwriting the value, this commit also ensures that the internal average (which is used for ANI) only tracks beacons of the AP that we're connected to. Signed-off-by:
-
Felix Fietkau authored
commit a3d63cad upstream. RSSI is being stored internally as s8 in several places. The indication of an unset RSSI value, ATH_RSSI_DUMMY_MARKER, was supposed to have been set to 127, but ended up being set to 0x127 because of a code cleanup mistake. This could lead to invalid signal strength values in a few places. Signed-off-by:
-
Bing Zhao authored
commit 46602698 upstream. For SD8688, FUNC_INIT command is queued before fw_ready flag is set. This causes the following crash as lbs_thread blocks any command if fw_ready is not set. [ 209.338953] [<c0502248>] (__schedule+0x610/0x764) from [<bf20ae24>] (__lbs_cmd+0xb8/0x130 [libertas]) [ 209.348340] [<bf20ae24>] (__lbs_cmd+0xb8/0x130 [libertas]) from [<bf222474>] (if_sdio_finish_power_on+0xec/0x1b0 [libertas_sdio]) [ 209.360136] [<bf222474>] (if_sdio_finish_power_on+0xec/0x1b0 [libertas_sdio]) from [<bf2226c4>] (if_sdio_power_on+0x18c/0x20c [libertas_sdio]) [ 209.373052] [<bf2226c4>] (if_sdio_power_on+0x18c/0x20c [libertas_sdio]) from [<bf222944>] (if_sdio_probe+0x200/0x31c [libertas_sdio]) [ 209.385316] [<bf222944>] (if_sdio_probe+0x200/0x31c [libertas_sdio]) from [<bf01d820>] (sdio_bus_probe+0x94/0xfc [mmc_core]) [ 209.396748] [<bf01d820>] (sdio_bus_probe+0x94/0xfc [mmc_core]) from [<c02e729c>] (driver_probe_device+0x12c/0x348) [ 209.407214] [<c02e729c>] (driver_probe_device+0x12c/0x348) from [<c02e7530>] (__driver_attach+0x78/0x9c) [ 209.416798] [<c02e7530>] (__driver_attach+0x78/0x9c) from [<c02e5658>] (bus_for_each_dev+0x50/0x88) [ 209.425946] [<c02e5658>] (bus_for_each_dev+0x50/0x88) from [<c02e6810>] (bus_add_driver+0x108/0x268) [ 209.435180] [<c02e6810>] (bus_add_driver+0x108/0x268) from [<c02e782c>] (driver_register+0xa4/0x134) [ 209.444426] [<c02e782c>] (driver_register+0xa4/0x134) from [<bf22601c>] (if_sdio_init_module+0x1c/0x3c [libertas_sdio]) [ 209.455339] [<bf22601c>] (if_sdio_init_module+0x1c/0x3c [libertas_sdio]) from [<c00085b8>] (do_one_initcall+0x98/0x174) [ 209.466236] [<c00085b8>] (do_one_initcall+0x98/0x174) from [<c0076504>] (load_module+0x1c5c/0x1f80) [ 209.475390] [<c0076504>] (load_module+0x1c5c/0x1f80) from [<c007692c>] (sys_init_module+0x104/0x128) [ 209.484632] [<c007692c>] (sys_init_module+0x104/0x128) from [<c0008c40>] (ret_fast_syscall+0x0/0x38) Fix it by setting fw_ready flag prior to queuing FUNC_INIT command. Reported-by:
Lubomir Rintel <lkundrak@v3.sk> Tested-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Avinash Patil authored
commit 3e7a4ff7 upstream. Maximum delay for waking up card is 50 ms. Because of typo in counter, this delay goes to 500ms. This patch fixes the bug. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
-
Johannes Berg authored
commit 8a964f44 upstream. The FH hardware will always write back to the scratch field in commands, even host commands not just TX commands, which can overwrite parts of the command. This is problematic if the command is re-used (with IWL_HCMD_DFL_NOCOPY) and can cause calibration issues. Address this problem by always putting at least the first 16 bytes into the buffer we also use for the command header and therefore make the DMA engine write back into this. For commands that are smaller than 16 bytes also always map enough memory for the DMA engine to write back to. Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Rusty Russell authored
commit f7f154f1 upstream. virtio_rng feeds the randomness buffer handed by the core directly into the scatterlist, since commit bb347d98. However, if CONFIG_HW_RANDOM=m, the static buffer isn't a linear address (at least on most archs). We could fix this in virtio_rng, but it's actually far easier to just do it in the core as virtio_rng would have to allocate a buffer every time (it doesn't know how much the core will want to read). Reported-by:
Aurelien Jarno <aurelien@aurel32.net> Tested-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Weston Andros Adamson authored
commit a47970ff upstream. This fixes an oops where a LAYOUTGET is in still in the rpciod queue, but the requesting processes has been killed. Without this, killing the process does the final pnfs_put_layout_hdr() and sets NFS_I(inode)->layout to NULL while the LAYOUTGET rpc task still references it. Example oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 IP: [<ffffffffa01bd586>] pnfs_choose_layoutget_stateid+0x37/0xef [nfsv4] PGD 7365b067 PUD 7365d067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: nfs_layout_nfsv41_files nfsv4 auth_rpcgss nfs lockd sunrpc ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle ip6table_filter ip6_tables ppdev e1000 i2c_piix4 i2c_core shpchp parport_pc parport crc32c_intel aesni_intel xts aes_x86_64 lrw gf128mul ablk_helper cryptd mptspi scsi_transport_spi mptscsih mptbase floppy autofs4 CPU 0 Pid: 27, comm: kworker/0:1 Not tainted 3.8.0-dros_cthon2013+ #4 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform RIP: 0010:[<ffffffffa01bd586>] [<ffffffffa01bd586>] pnfs_choose_layoutget_stateid+0x37/0xef [nfsv4] RSP: 0018:ffff88007b0c1c88 EFLAGS: 00010246 RAX: ffff88006ed36678 RBX: 0000000000000000 RCX: 0000000ea877e3bc RDX: ffff88007a729da8 RSI: 0000000000000000 RDI: ffff88007a72b958 RBP: ffff88007b0c1ca8 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88007a72b958 R13: ffff88007a729da8 R14: 0000000000000000 R15: ffffffffa011077e FS: 0000000000000000(0000) GS:ffff88007f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 00000000735f8000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/0:1 (pid: 27, threadinfo ffff88007b0c0000, task ffff88007c2fa0c0) Stack: ffff88006fc05388 ffff88007a72b908 ffff88007b240900 ffff88006fc05388 ffff88007b0c1cd8 ffffffffa01a2170 ffff88007b240900 ffff88007b240900 ffff88007b240970 ffffffffa011077e ffff88007b0c1ce8 ffffffffa0110791 Call Trace: [<ffffffffa01a2170>] nfs4_layoutget_prepare+0x7b/0x92 [nfsv4] [<ffffffffa011077e>] ? __rpc_atrun+0x15/0x15 [sunrpc] [<ffffffffa0110791>] rpc_prepare_task+0x13/0x15 [sunrpc] Reported-by:
Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Benny Halevy authored
commit 78f33277 upstream. Pass the directio request on pageio_init to clean up the API. Percolate pg_dreq from original nfs_pageio_descriptor to the pnfs_{read,write}_done_resend_to_mds and use it on respective call to nfs_pageio_init_{read,write} on the newly created nfs_pageio_descriptor. Reproduced by command: mount -o vers=4.1 server:/ /mnt dd bs=128k count=8 if=/dev/zero of=/mnt/dd.out oflag=direct BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs] PGD 34786067 PUD 34794067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: nfs_layout_nfsv41_files nfsv4 nfs nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc btrfs zlib_deflate libcrc32c ipv6 autofs4 CPU 1 Pid: 259, comm: kworker/1:2 Not tainted 3.8.0-rc6 #2 Bochs Bochs RIP: 0010:[<ffffffffa021a3a8>] [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs] RSP: 0018:ffff880038f8fa68 EFLAGS: 00010206 RAX: ffffffffa021a6a9 RBX: ffff880038f8fb48 RCX: 00000000000a0000 RDX: ffffffffa021e616 RSI: ffff8800385e9a40 RDI: 0000000000000028 RBP: ffff880038f8fa68 R08: ffffffff81ad6720 R09: ffff8800385e9510 R10: ffffffffa0228450 R11: ffff880038e87418 R12: ffff8800385e9a40 R13: ffff8800385e9a70 R14: ffff880038f8fb38 R15: ffffffffa0148878 FS: 0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000028 CR3: 0000000034789000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/1:2 (pid: 259, threadinfo ffff880038f8e000, task ffff880038302480) Stack: ffff880038f8fa78 ffffffffa021a6bf ffff880038f8fa88 ffffffffa021bb82 ffff880038f8fae8 ffffffffa021f454 ffff880038f8fae8 ffffffff8109689d ffff880038f8fab8 ffffffff00000006 0000000000000000 ffff880038f8fb48 Call Trace: [<ffffffffa021a6bf>] nfs_direct_pgio_init+0x16/0x18 [nfs] [<ffffffffa021bb82>] nfs_pgheader_init+0x6a/0x6c [nfs] [<ffffffffa021f454>] nfs_generic_pg_writepages+0x51/0xf8 [nfs] [<ffffffff8109689d>] ? mark_held_locks+0x71/0x99 [<ffffffffa0148878>] ? rpc_release_resources_task+0x37/0x37 [sunrpc] [<ffffffffa021bc25>] nfs_pageio_doio+0x1a/0x43 [nfs] [<ffffffffa021be7c>] nfs_pageio_complete+0x16/0x2c [nfs] [<ffffffffa02608be>] pnfs_write_done_resend_to_mds+0x95/0xc5 [nfsv4] [<ffffffffa0148878>] ? rpc_release_resources_task+0x37/0x37 [sunrpc] [<ffffffffa028e27f>] filelayout_reset_write+0x8c/0x99 [nfs_layout_nfsv41_files] [<ffffffffa028e5f9>] filelayout_write_done_cb+0x4d/0xc1 [nfs_layout_nfsv41_files] [<ffffffffa024587a>] nfs4_write_done+0x36/0x49 [nfsv4] [<ffffffffa021f996>] nfs_writeback_done+0x53/0x1cc [nfs] [<ffffffffa021fb1d>] nfs_writeback_done_common+0xe/0x10 [nfs] [<ffffffffa028e03d>] filelayout_write_call_done+0x28/0x2a [nfs_layout_nfsv41_files] [<ffffffffa01488a1>] rpc_exit_task+0x29/0x87 [sunrpc] [<ffffffffa014a0c9>] __rpc_execute+0x11d/0x3cc [sunrpc] [<ffffffff810969dc>] ? trace_hardirqs_on_caller+0x117/0x173 [<ffffffffa014a39f>] rpc_async_schedule+0x27/0x32 [sunrpc] [<ffffffffa014a378>] ? __rpc_execute+0x3cc/0x3cc [sunrpc] [<ffffffff8105f8c1>] process_one_work+0x226/0x422 [<ffffffff8105f7f4>] ? process_one_work+0x159/0x422 [<ffffffff81094757>] ? lock_acquired+0x210/0x249 [<ffffffffa014a378>] ? __rpc_execute+0x3cc/0x3cc [sunrpc] [<ffffffff810600d8>] worker_thread+0x126/0x1c4 [<ffffffff8105ffb2>] ? manage_workers+0x240/0x240 [<ffffffff81064ef8>] kthread+0xb1/0xb9 [<ffffffff81064e47>] ? __kthread_parkme+0x65/0x65 [<ffffffff815206ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81064e47>] ? __kthread_parkme+0x65/0x65 Code: 00 83 38 02 74 12 48 81 4b 50 00 00 01 00 c7 83 60 07 00 00 01 00 00 00 48 89 df e8 55 fe ff ff 5b 41 5c 5d c3 66 90 55 48 89 e5 <f0> ff 07 5d c3 55 48 89 e5 f0 ff 0f 0f 94 c0 84 c0 0f 95 c0 0f RIP [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs] RSP <ffff880038f8fa68> CR2: 0000000000000028 Signed-off-by:
Benny Halevy <bhalevy@tonian.com> Signed-off-by:
-
Trond Myklebust authored
commit a9a6b52e upstream. If the socket is full, we're better off just waiting until it empties, or until the connection is broken. The reason why we generally don't want to time out is that the call to xprt->ops->release_xprt() will trigger a connection reset, which isn't helpful... Let's make an exception for soft RPC calls, since they have to provide timeout guarantees. Signed-off-by:
-
Trond Myklebust authored
commit 5a7a613a upstream. Commit 73ca1001 broke the code that prevents the client from deleting a silly renamed dentry. This affected "delete on last close" semantics as after that commit, nothing prevented removal of silly-renamed files. As a result, a process holding a file open could easily get an ESTALE on the file in a directory where some other process issued 'rm -rf some_dir_containing_the_file' twice. Before the commit, any attempt at unlinking silly renamed files would fail inside may_delete() with -EBUSY because of the DCACHE_NFSFS_RENAMED flag. The following testcase demonstrates the problem: tail -f /nfsmnt/dir/file & rm -rf /nfsmnt/dir rm -rf /nfsmnt/dir # second removal does not fail, 'tail' process receives ESTALE The problem with the above commit is that it unhashes the old and new dentries from the lookup path, even in the normal case when a signal is not encountered and it would have been safe to call d_move. Unfortunately the old dentry has the special DCACHE_NFSFS_RENAMED flag set on it. Unhashing has the side-effect that future lookups call d_alloc(), allocating a new dentry without the special flag for any silly-renamed files. As a result, subsequent calls to unlink silly renamed files do not fail but allow the removal to go through. This will result in ESTALE errors for any other process doing operations on the file. To fix this, go back to using d_move on success. For the signal case, it's unclear what we may safely do beyond d_drop. Reported-by:
Dave Wysochanski <dwysocha@redhat.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 23cb2109 upstream. Add module aliases so that autoloading works correctly if the user tries to activate "snapshot-origin" or "snapshot-merge" targets. Reference: https://bugzilla.redhat.com/889973Reported-by:
Chao Yang <chyang@redhat.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Mike Christie authored
commit 87eb5b21 upstream. dm_calculate_queue_limits will first reset the provided limits to defaults using blk_set_stacking_limits; whereby defeating the purpose of retaining the original live table's limits -- as was intended via commit 3ae70656 ("dm: retain table limits when swapping to new table with no devices"). Fix this improper limits initialization (in the no data devices case) by avoiding the call to dm_calculate_queue_limits. [patch header revised by Mike Snitzer] Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Jun'ichi Nomura authored
commit 16245bdc upstream. This patch fixes a regression introduced in v3.8, which causes oops like this when dm-multipath is used: general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffff810fe754>] [<ffffffff810fe754>] mempool_free+0x24/0xb0 Call Trace: <IRQ> [<ffffffff81187417>] bio_put+0x97/0xc0 [<ffffffffa02247a5>] end_clone_bio+0x35/0x90 [dm_mod] [<ffffffff81185efd>] bio_endio+0x1d/0x30 [<ffffffff811f03a3>] req_bio_endio.isra.51+0xa3/0xe0 [<ffffffff811f2f68>] blk_update_request+0x118/0x520 [<ffffffff811f3397>] blk_update_bidi_request+0x27/0xa0 [<ffffffff811f343c>] blk_end_bidi_request+0x2c/0x80 [<ffffffff811f34d0>] blk_end_request+0x10/0x20 [<ffffffffa000b32b>] scsi_io_completion+0xfb/0x6c0 [scsi_mod] [<ffffffffa000107d>] scsi_finish_command+0xbd/0x120 [scsi_mod] [<ffffffffa000b12f>] scsi_softirq_done+0x13f/0x160 [scsi_mod] [<ffffffff811f9fd0>] blk_done_softirq+0x80/0xa0 [<ffffffff81044551>] __do_softirq+0xf1/0x250 [<ffffffff8142ee8c>] call_softirq+0x1c/0x30 [<ffffffff8100420d>] do_softirq+0x8d/0xc0 [<ffffffff81044885>] irq_exit+0xd5/0xe0 [<ffffffff8142f3e3>] do_IRQ+0x63/0xe0 [<ffffffff814257af>] common_interrupt+0x6f/0x6f <EOI> [<ffffffffa021737c>] srp_queuecommand+0x8c/0xcb0 [ib_srp] [<ffffffffa0002f18>] scsi_dispatch_cmd+0x148/0x310 [scsi_mod] [<ffffffffa000a38e>] scsi_request_fn+0x31e/0x520 [scsi_mod] [<ffffffff811f1e57>] __blk_run_queue+0x37/0x50 [<ffffffff811f1f69>] blk_delay_work+0x29/0x40 [<ffffffff81059003>] process_one_work+0x1c3/0x5c0 [<ffffffff8105b22e>] worker_thread+0x15e/0x440 [<ffffffff8106164b>] kthread+0xdb/0xe0 [<ffffffff8142db9c>] ret_from_fork+0x7c/0xb0 The regression was introduced by the change c0820cf5 "dm: introduce per_bio_data", where dm started to replace bioset during table replacement. For bio-based dm, it is good because clone bios do not exist during the table replacement. For request-based dm, however, (not-yet-mapped) clone bios may stay in request queue and survive during the table replacement. So freeing the old bioset could cause the oops in bio_put(). Since the size of front_pad may change only with bio-based dm, it is not necessary to replace bioset for request-based dm. Reported-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by:
-
Mikulas Patocka authored
commit fd7c092e upstream. Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Signed-off-by:
-
Jeff Layton authored
commit ce2ac521 upstream. Kjell Braden reported this oops: [ 833.211970] BUG: unable to handle kernel NULL pointer dereference at (null) [ 833.212816] IP: [< (null)>] (null) [ 833.213280] PGD 1b9b2067 PUD e9f7067 PMD 0 [ 833.213874] Oops: 0010 [#1] SMP [ 833.214344] CPU 0 [ 833.214458] Modules linked in: des_generic md4 nls_utf8 cifs vboxvideo drm snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq bnep rfcomm snd_timer bluetooth snd_seq_device ppdev snd vboxguest parport_pc joydev mac_hid soundcore snd_page_alloc psmouse i2c_piix4 serio_raw lp parport usbhid hid e1000 [ 833.215629] [ 833.215629] Pid: 1752, comm: mount.cifs Not tainted 3.0.0-rc7-bisectcifs-fec11dd9+ #18 innotek GmbH VirtualBox/VirtualBox [ 833.215629] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 833.215629] RSP: 0018:ffff8800119c9c50 EFLAGS: 00010282 [ 833.215629] RAX: ffffffffa02186c0 RBX: ffff88000c427780 RCX: 0000000000000000 [ 833.215629] RDX: 0000000000000000 RSI: ffff88000c427780 RDI: ffff88000c4362e8 [ 833.215629] RBP: ffff8800119c9c88 R08: ffff88001fc15e30 R09: 00000000d69515c7 [ 833.215629] R10: ffffffffa0201972 R11: ffff88000e8f6a28 R12: ffff88000c4362e8 [ 833.215629] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88001181aaa6 [ 833.215629] FS: 00007f2986171700(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 [ 833.215629] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 833.215629] CR2: 0000000000000000 CR3: 000000001b982000 CR4: 00000000000006f0 [ 833.215629] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 833.215629] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 833.215629] Process mount.cifs (pid: 1752, threadinfo ffff8800119c8000, task ffff88001c1c16f0) [ 833.215629] Stack: [ 833.215629] ffffffff8116a9b5 ffff8800119c9c88 ffffffff81178075 0000000000000286 [ 833.215629] 0000000000000000 ffff88000c4276c0 ffff8800119c9ce8 ffff8800119c9cc8 [ 833.215629] ffffffff8116b06e ffff88001bc6fc00 ffff88000c4276c0 ffff88000c4276c0 [ 833.215629] Call Trace: [ 833.215629] [<ffffffff8116a9b5>] ? d_alloc_and_lookup+0x45/0x90 [ 833.215629] [<ffffffff81178075>] ? d_lookup+0x35/0x60 [ 833.215629] [<ffffffff8116b06e>] __lookup_hash.part.14+0x9e/0xc0 [ 833.215629] [<ffffffff8116b1d6>] lookup_one_len+0x146/0x1e0 [ 833.215629] [<ffffffff815e4f7e>] ? _raw_spin_lock+0xe/0x20 [ 833.215629] [<ffffffffa01eef0d>] cifs_do_mount+0x26d/0x500 [cifs] [ 833.215629] [<ffffffff81163bd3>] mount_fs+0x43/0x1b0 [ 833.215629] [<ffffffff8117d41a>] vfs_kern_mount+0x6a/0xd0 [ 833.215629] [<ffffffff8117e584>] do_kern_mount+0x54/0x110 [ 833.215629] [<ffffffff8117fdc2>] do_mount+0x262/0x840 [ 833.215629] [<ffffffff81108a0e>] ? __get_free_pages+0xe/0x50 [ 833.215629] [<ffffffff8117f9ca>] ? copy_mount_options+0x3a/0x180 [ 833.215629] [<ffffffff8118075d>] sys_mount+0x8d/0xe0 [ 833.215629] [<ffffffff815ece82>] system_call_fastpath+0x16/0x1b [ 833.215629] Code: Bad RIP value. [ 833.215629] RIP [< (null)>] (null) [ 833.215629] RSP <ffff8800119c9c50> [ 833.215629] CR2: 0000000000000000 [ 833.238525] ---[ end trace ec00758b8d44f529 ]--- When walking down the path on the server, it's possible to hit a symlink. The path walking code assumes that the caller will handle that situation properly, but cifs_get_root() isn't set up for it. This patch prevents the oops by simply returning an error. A better solution would be to try and chase the symlinks here, but that's fairly complicated to handle. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=53221Reported-and-tested-by:
Kjell Braden <afflux@pentabarf.de> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Josef Bacik authored
commit 124fe663 upstream. Apparently when we do inline extents we allow the data to overlap the last chunk of the btrfs_file_extent_item, which means that we can possibly have a btrfs_file_extent_item that isn't actually as large as a btrfs_file_extent_item. This messes with us when we try to overwrite the extent when logging new extents since we expect for it to be the right size. To fix this just delete the item and try to do the insert again which will give us the proper sized btrfs_file_extent_item. This fixes a panic where map_private_extent_buffer would blow up because we're trying to write past the end of the leaf. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
-
Josef Bacik authored
commit bdc20e67 upstream. I noticed while looking into a tree logging bug that we aren't logging inline extents properly. Since this requires copying and it shouldn't happen too often just force us to copy everything for the inode into the tree log when we have an inline extent. With this patch we have valid data after a crash when we write an inline extent. Thanks, Signed-off-by:
-
Thomas Gleixner authored
commit 1cba0cdf upstream. __btrfs_close_devices() clones btrfs device structs with memcpy(). Some of the fields in the clone are reinitialized, but it's missing to init io_lock. In mainline this goes unnoticed, but on RT it leaves the plist pointing to the original about to be freed lock struct. Initialize io_lock after cloning, so no references to the original struct are left. Reported-and-tested-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
-
Lukas Czerner authored
commit 810da240 upstream. We're using macro EXT4_B2C() to convert number of blocks to number of clusters for bigalloc file systems. However, we should be using EXT4_NUM_B2C(). Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Nicholas Bellinger authored
commit fd3a9025 upstream. This patch addresses a v3.5+ regression in iscsi-target where TX thread process context -> handle_response_queue() execution is allowed to run unbounded while servicing constant outgoing flow of ISTATE_SEND_DATAIN response state. This ends up preventing memory release of StatSN acknowledged commands in a timely manner when under heavy large block streaming DATAIN workloads. The regression bug was initially introduced with: commit 6f3c0e69 Author: Andy Grover <agrover@redhat.com> Date: Tue Apr 3 15:51:09 2012 -0700 target/iscsi: Refactor target_tx_thread immediate+response queue loops Go ahead and follow original iscsi_target_tx_thread() logic and check to break for immediate queue processing after each DataIN Sequence and/or Response PDU has been sent. Reported-by:
Benjamin ESTRABAUD <be@mpstor.com> Cc: Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Asias He authored
commit 472b72f2 upstream. The page++ is wrong. It makes bio_add_pc_page() pointing to a wrong page address if the 'while (len > 0 && data_len > 0) { ... }' loop is executed more than one once. Signed-off-by:
Asias He <asias@redhat.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 9d2696e6 upstream. Properly initialize scatterlist before using it. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Dan Carpenter authored
commit 208afec4 upstream. This bug was introduced back in bitkeeper days in 2003. We use "dcb->dev_mode" before it has been initialized. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Mattia Dongili authored
commit 3ec1c398 upstream. The call to handlers 0x124 and 0x135 (rfkill control) seems to take a bitmask to control various states of the device. For our rfkill we need a fully on/off. SVZ1311Z9R/X's LTE modem needs more bits up. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47751Signed-off-by:
Mattia Dongili <malattia@linux.it> Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by:
-
Takahisa Tanaka authored
commit 41adafbd upstream. In case of SP5100 or SB7x0 chipsets, the sp5100_tco module writes zero to reserved bits. The module, however, shouldn't depend on specific default value, and should perform a read-merge-write operation for the reserved bits. This patch makes the sp5100_tco module perform a read-merge-write operation on all the chipset (sp5100, sb7x0, sb8x0 or later). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43176Signed-off-by:
Takahisa Tanaka <mc74hc00@gmail.com> Tested-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Takahisa Tanaka authored
commit 10ab329b upstream. In case of SB800 or later chipset and re-programming MMIO address(*), sp5100_tco module may read incorrect value of reserved bit, because the module reads a value from an incorrect I/O address. However, this bug doesn't cause a problem, because when re-programming MMIO address, by chance the module writes zero (this is BIOS's default value) to the low three bits of register. * In most cases, PC with SB8x0 or later chipset doesn't need to re-programming MMIO address, because such PC can enable AcpiMmio and can use 0xfed80b00 for watchdog register base address. This patch fixes this bug. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43176Signed-off-by:
-
Randy Dunlap authored
commit 12a5c05c upstream. DA9055_WATCHDOG (introduced in v3.8) needs to select WATCHDOG_CORE so that it will build cleanly. Fixes these build errors: da9055_wdt.c:(.text+0xe9bc7): undefined reference to `watchdog_unregister_device' da9055_wdt.c:(.text+0xe9f4b): undefined reference to `watchdog_register_device' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: David Dajun Chen <dchen@diasemi.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 884ac297 upstream. There is no hypercall to setup multiple MSI per PCI device. As such with these two new commits: - 08261d87 PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto() - 5ca72c4f AHCI: Support multiple MSIs we would call the PHYSDEVOP_map_pirq 'nvec' times with the same contents of the PCI device. Sander discovered that we would get the same PIRQ value 'nvec' times and return said values to the caller. That of course meant that the device was configured only with one MSI and AHCI would fail with: ahci 0000:00:11.0: version 3.0 xen: registering gsi 19 triggering 0 polarity 1 xen: --> pirq=19 -> irq=19 (gsi=19) (XEN) [2013-02-27 19:43:07] IOAPIC[0]: Set PCI routing entry (6-19 -> 0x99 -> IRQ 19 Mode:1 Active:1) ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ahci: probe of 0000:00:11.0 failed with error -22 That is b/c in ahci_host_activate the second call to devm_request_threaded_irq would return -EINVAL as we passed in (on the second run) an IRQ that was never initialized. Reported-and-Tested-by:
Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit c79c4982 upstream. The git commit 8eaffa67 (xen/pat: Disable PAT support for now) explains in details why we want to disable PAT for right now. However that change was not enough and we should have also disabled the pat_enabled value. Otherwise we end up with: mmap-example:3481 map pfn expected mapping type write-back for [mem 0x00010000-0x00010fff], got uncached-minus ------------[ cut here ]------------ WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774 untrack_pfn+0xb8/0xd0() mem 0x00010000-0x00010fff], got uncached-minus ------------[ cut here ]------------ WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774 untrack_pfn+0xb8/0xd0() ... Pid: 3481, comm: mmap-example Tainted: GF 3.8.0-6-generic #13-Ubuntu Call Trace: [<ffffffff8105879f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff810587fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8104bcc8>] untrack_pfn+0xb8/0xd0 [<ffffffff81156c1c>] unmap_single_vma+0xac/0x100 [<ffffffff81157459>] unmap_vmas+0x49/0x90 [<ffffffff8115f808>] exit_mmap+0x98/0x170 [<ffffffff810559a4>] mmput+0x64/0x100 [<ffffffff810560f5>] dup_mm+0x445/0x660 [<ffffffff81056d9f>] copy_process.part.22+0xa5f/0x1510 [<ffffffff81057931>] do_fork+0x91/0x350 [<ffffffff81057c76>] sys_clone+0x16/0x20 [<ffffffff816ccbf9>] stub_clone+0x69/0x90 [<ffffffff816cc89d>] ? system_call_fastpath+0x1a/0x1f ---[ end trace 4918cdd0a4c9fea4 ]--- (a similar message shows up if you end up launching 'mcelog') The call chain is (as analyzed by Liu, Jinsong): do_fork --> copy_process --> dup_mm --> dup_mmap --> copy_page_range --> track_pfn_copy --> reserve_pfn_range --> line 624: flags != want_flags It comes from different memory types of page table (_PAGE_CACHE_WB) and MTRR (_PAGE_CACHE_UC_MINUS). Stefan Bader dug in this deep and found out that: "That makes it clearer as this will do reserve_memtype(...) --> pat_x_mtrr_type --> mtrr_type_lookup --> __mtrr_type_lookup And that can return -1/0xff in case of MTRR not being enabled/initialized. Which is not the case (given there are no messages for it in dmesg). This is not equal to MTRR_TYPE_WRBACK and thus becomes _PAGE_CACHE_UC_MINUS. It looks like the problem starts early in reserve_memtype: if (!pat_enabled) { /* This is identical to page table setting without PAT */ if (new_type) { if (req_type == _PAGE_CACHE_WC) *new_type = _PAGE_CACHE_UC_MINUS; else *new_type = req_type & _PAGE_CACHE_MASK; } return 0; } This would be what we want, that is clearing the PWT and PCD flags from the supported flags - if pat_enabled is disabled." This patch does that - disabling PAT. Reported-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Steven Noonan authored
commit 45e27161 upstream. Adding an include of linux/mm.h resolves this: drivers/xen/xenbus/xenbus_client.c: In function ‘xenbus_map_ring_valloc_hvm’: drivers/xen/xenbus/xenbus_client.c:532:66: error: implicit declaration of function ‘page_to_section’ [-Werror=implicit-function-declaration] Signed-off-by:
Steven Noonan <steven@uplinklabs.net> Signed-off-by:
-
