- 30 Apr, 2019 11 commits
-
-
Colin Ian King authored
There is a spelling mistake in the module description. Fix this. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Brett Mastbergen authored
The 'id' key returns the unique id of the conntrack entry as returned by nf_ct_get_id(). Signed-off-by:
Brett Mastbergen <bmastbergen@untangle.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Flavio Leitner authored
This improves the original commit 17c357ef ("openvswitch: load NAT helper") where it unconditionally tries to load the module for every flow using NAT, so not efficient when loading multiple flows. It also doesn't hold any references to the NAT module while the flow is active. This change fixes those problems. It will try to load the module only if it's not present. It grabs a reference to the NAT module and holds it while the flow is active. Finally, an error message shows up if either actions above fails. Fixes: 17c357ef ("openvswitch: load NAT helper") Signed-off-by:
Flavio Leitner <fbl@redhat.com> Signed-off-by:
-
Flavio Leitner authored
Register amanda, ftp, irc, sip and tftp NAT helpers. Signed-off-by:
-
Flavio Leitner authored
The API allows a conntrack helper to indicate its corresponding NAT helper which then can be loaded and reference counted. Signed-off-by:
-
Flavio Leitner authored
Each NAT helper creates a module alias which follows a pattern. Use macros for consistency. Signed-off-by:
-
Tonghao Zhang authored
We use the zero and one to limit the boolean options setting. After this patch we only set 0 or 1 to boolean options for nf conntrack sysctl. Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
Paul Gortmaker authored
Ideally, header files under include/linux shouldn't be adding includes of other headers, in anticipation of their consumers, but just the headers needed for the header itself to pass parsing with CPP. The module.h is particularly bad in this sense, as it itself does include a whole bunch of other headers, due to the complexity of module support. Since nf_tables.h is not going into a module struct looking for specific fields, we can just let it know that module is a struct, just like about 60 other include/linux headers already do. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Paul Gortmaker authored
This file clearly uses modular infrastructure but does not call out the inclusion of <linux/module.h> explicitly. We add that include explicitly here, so we can tidy up some header usage elsewhere w/o causing build breakage. Signed-off-by:
-
Paul Gortmaker authored
The nf_tables.h header is used in a lot of files, but it turns out that there is only one actual user of nft_expr_clone(). Hence we relocate that function to be with the one consumer of it and avoid having to process it with CPP for all the other files. This will also enable a reduction in the other headers that the nf_tables.h itself has to include just to be stand-alone, hence a pending further significant reduction in the CPP content that needs to get processed for each netfilter file. Note that the explicit "inline" has been dropped as part of this relocation. In similar changes to this, I believe Dave has asked this be done, so we free up gcc to make the choice of whether to inline or not. Signed-off-by:
-
Antoine Tenart authored
The KSZ8081 PHY has a factory test mode which is set at the de-assertion of the reset line based on the RXER (KSZ8081RNA/RND) or TXC (KSZ8081MNX/RNB) pin. If a pull-down is missing, or if the pin has a pull-up, the factory test mode should be cleared by manually writing a 0 (according to the datasheet). This patch makes sure this factory test bit is cleared in config_init(). Tested-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 28 Apr, 2019 26 commits
-
-
Heiner Kallweit authored
Considering that in polling mode each link drop will be latched, settings can't have changed if link was up and is up. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== Make DSA tag drivers kernel modules Historically, DSA tag drivers have been compiled into the kernel as part of the DSA core. With the growing number of tag drivers, it makes sense to allow this driver code to be compiled as a module, and loaded on demand. v2 -- Move name to end of structure, keeping the hot entries at the beginning. More tag protocol to end of structure to keep hot members at the beginning. Fix indent of #endif Rewrite to move list pointer into a new structure void functions, since there cannot be errors Fix fall-through comment Reorder patch for unused symbols to before tag drivers can be modules tab/space cleanup Help text wording NET_DSA_TAG_BRCM_COMMON and NET_DSA_TAG_KZS_COMMON hidden v3 -- boilerplate: Move kdoc next to macro boilerplate: Fix THIS_MODULE indentation Kconfig: More tabification Kconfig: Punctuation v4 -- Cover note {H}istorically Kconfig: trailer ==================== Tested-by:Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Make the CONFIG symbols tristate and add help text. The broadcom and Microchip KSZ tag drivers support two different tagging protocols in one driver. Add a configuration option for the drivers, and then options to select the protocol. Create a submenu for the tagging drivers. Signed-off-by:
-
Andrew Lunn authored
It is possible that the driver is compiled with both CONFIG_NET_DSA_TAG_BRCM and CONFIG_NET_DSA_TAG_BRCM_PREPEND disabled. This results in warnings about unused symbols. Add some conditional compilation to avoid this. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> v2 Reorder patch to before tag drivers can be modules Signed-off-by:
-
Andrew Lunn authored
Now that tag drivers dynamically register, we don't need the static table. Remove it. This also means the tag driver structures can be made static. Signed-off-by:
-
Andrew Lunn authored
Implement the _get and _put functions to make use of the list of tag drivers. Also, trigger the loading of the module, based on the alias information. The _get function takes a reference on the tag driver, so it cannot be unloaded, and the _put function releases the reference. Signed-off-by:
-
Andrew Lunn authored
When a DSA switch driver is unloaded, the lock on the tag driver should be released so the module can be unloaded. Add the needed calls, but leave the actual release code as a stub. Signed-off-by:
-
Andrew Lunn authored
dsa_resolve_tag_protocol() is used to find the tagging driver needed by a switch driver. When the tagging drivers become modules, it will be necassary to take a reference on the module to prevent it being unloaded. So rename this function to _get() to indicate it has some locking properties. Signed-off-by:
-
Andrew Lunn authored
The none tagger is special in that it does not live in a tag_*.c file, but is within the core. Register/unregister when DSA is loaded/unloaded. Signed-off-by:
-
Andrew Lunn authored
Let the tag drivers register themselves with the DSA core, keeping them in a linked list. Signed-off-by:
-
Andrew Lunn authored
A DSA tag driver module will need to register the tag protocols it implements with the DSA core. Add macros containing this boiler plate. The registration/unregistration code is currently just a stub. A Later patch will add the real implementation. Signed-off-by:
-
Andrew Lunn authored
In order that we can match the tagging protocol a switch driver request to the tagger, we need to know what protocol the tagger supports. Add this information to the ops structure. Signed-off-by:
-
Andrew Lunn authored
All the tag drivers are some variant of GPL. Add a MODULE_LICENSE() indicating this, so the drivers can later be compiled as modules. Signed-off-by:
-
Andrew Lunn authored
When the tag drivers become modules, we will need to dynamically load them based on what the switch drivers need. Add aliases to map between the TAG protocol and the driver. In order to do this, we need the tag protocol number as something which the C pre-processor can stringinfy. Only the compiler knows the value of an enum, CPP cannot use them. So add #defines. Signed-off-by:
-
Andrew Lunn authored
Rather than keep a list to map a tagger ops to a name, place the name into the ops structure. This removes the hard coded list, a step towards making the taggers more dynamic. Signed-off-by:
-
Andrew Lunn authored
Add an SPDX header, and remove the license boilerplate text. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-28 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Introduce BPF socket local storage map so that BPF programs can store private data they associate with a socket (instead of e.g. separate hash table), from Martin. 2) Add support for bpftool to dump BTF types. This is done through a new `bpftool btf dump` sub-command, from Andrii. 3) Enable BPF-based flow dissector for skb-less eth_get_headlen() calls which was currently not supported since skb was used to lookup netns, from Stanislav. 4) Add an opt-in interface for tracepoints to expose a writable context for attached BPF programs, used here for NBD sockets, from Matt. 5) BPF xadd related arm64 JIT fixes and scalability improvements, from Daniel. 6) Change the skb->protocol for bpf_skb_adjust_room() helper in order to support tunnels such as sit. Add selftests as well, from Willem. 7) Various smaller misc fixes. ==================== Signed-off-by: -
Vishal Kulkarni authored
During driver unload, hash/TCAM filter deletion doesn't wait for completion.This patch deletes all the filters with completion before clearing the resources. Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
Andrew Lunn authored
Remove the legacy method of probing the mv88e6xxx driver, now that all the mainline boards have been converted to use mdio based probing for a number of cycles. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== mv88e6060 cleanups This patchset performs some cleanups of the mv88e6060 DSA driver, as a step towards making it an MDIO device, rather than use the old probing method. The changes here are all pretty mechanical and only compile tested. ==================== Signed-off-by: -
Andrew Lunn authored
The REG_READ macro contains a return statement, making it not very safe. Remove it by inlining the code. Signed-off-by:
-
Andrew Lunn authored
The REG_WRITE macro contains a return statement, making it not very safe. Remove it by inlining the code. Signed-off-by:
-
Andrew Lunn authored
Pass around priv, not ds. This will help with changing to an mdio driver, and makes this driver more like mv88e6xxx. Signed-off-by:
-
Andrew Lunn authored
Add an SPDX header, and remove the license text. Signed-off-by:
-
Murilo Fossa Vicentini authored
The ibmvnic driver currently uses the same fixed name when using request_irq, this makes it hard to parse when multiple VNIC devices are available at the same time. This patch adds the unit_address as the device identification along with an id for each queue. The original idea was to use the interface name as an identifier, but it is not feasible given these requests happen at adapter probe, and at this point netdev is not yet registered so it doesn't have the proper name assigned to it. Signed-off-by:
Murilo Fossa Vicentini <muvic@linux.ibm.com> Reviewed-by:
Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Reviewed-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
To fix the build. Signed-off-by:
-
- 27 Apr, 2019 3 commits
-
-
David S. Miller authored
Grygorii Strashko says: ==================== net: ethernet: ti: clean up and optimizations This is a preparation series for introducing new switchbase TI CPSW driver which was originally introduced [1][2] by Ilias Apalodimas <ilias.apalodimas@linaro.org> and also discussed in private mails and at Netdev x13 confernce. Following discussions and suggestions (mostly by Andrew and Ivan) we going to introduce the new driver which is operating in dual-emac mode by default, thus working as 2 individual network interfaces. When both interfaces joined the bridge - CPSW driver will enter a switch mode and discard dual_mac configuration. The CPSW will be switched back to dual_mac mode if any port leaves the bridge. All configuration is going to be implemented via switchdev API. Hence overall change is already very big I'm sending prerequisite patches which are mostly minor fixes/clean ups and code refactoring to separate common parts to be reused by both drivers. Probably the most serious change from functional point of view is Patch 11. These patches were NFS boot tetested on TI AM335x/AM437x/AM5xx boards. These patches can be found at: git@git.ti.com:~gragst/ti-linux-kernel/gragsts-ti-linux-kernel.git branch: lkml-5.1-cpsw-clean-up-v2 changes in v2: - added new patch 16 to get rid of force type conversation - other chages metioned in patches ==================== Signed-off-by: -
Grygorii Strashko authored
As a preparatory patch to add support for a switchdev based cpsw driver, move common ethtool functions to separate cpsw-ethtool.c file so that they can be used across both drivers. It will simplify CPSW driver code maintenance also. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
-
Grygorii Strashko authored
Switch CPSW driver to use the new MAC SL API. Signed-off-by:
-
