Skip to content

L
linux
Switch branch/tag
  1. 29 Jun, 2017 20 commits
    • Paul Mackerras's avatar
      KVM: PPC: Book3S HV: Cope with host using large decrementer mode · 1e0d7996
      Paul Mackerras authored 
      commit 2f272463 upstream.

POWER9 introduces a new mode for the decrementer register, called
large decrementer mode, in which the decrementer counter is 56 bits
wide rather than 32, and reads are sign-extended rather than
zero-extended.  For the decrementer, this new mode is optional and
controlled by a bit in the LPCR.  The hypervisor decrementer (HDEC)
is 56 bits wide on POWER9 and has no mode control.

Since KVM code reads and writes the decrementer and hypervisor
decrementer registers in a few places, it needs to be aware of the
need to treat the decrementer value as a 64-bit quantity, and only do
a 32-bit sign extension when large decrementer mode is not in effect.
Similarly, the HDEC should always be treated as a 64-bit quantity on
POWER9.  We define a new EXTEND_HDEC macro to encapsulate the feature
test for POWER9 and the sign extension.

To enable the sign extension to be removed in large decrementer mode,
we test the LPCR_LD bit in the host LPCR image stored in the struct
kvm for the guest.  If is set then large decrementer mode is enabled
and the sign extension should be skipped.

This is partly based on an earlier patch by Oliver O'Halloran.
Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1e0d7996
    • Heiko Carstens's avatar
      KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows · 5d34bddd
      Heiko Carstens authored 
      commit addb63c1 upstream.

For real-space designation asces the asce origin part is only a token.
The asce token origin must not be used to generate an effective
address for storage references. This however is erroneously done
within kvm_s390_shadow_tables().

Furthermore within the same function the wrong parts of virtual
addresses are used to generate a corresponding real address
(e.g. the region second index is used as region first index).

Both of the above can result in incorrect address translations. Only
for real space designations with a token origin of zero and addresses
below one megabyte the translation was correct.

Furthermore replace a "!asce.r" statement with a "!*fake" statement to
make it more obvious that a specific condition has nothing to do with
the architecture, but with the fake handling of real space designations.

Fixes: 3218f709 ("s390/mm: support real-space for gmap shadows")
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5d34bddd
    • James Cowgill's avatar
      KVM: MIPS: Fix maybe-uninitialized build failure · 87ee4cdd
      James Cowgill authored 
      commit e27a9eca upstream.

This commit fixes a "maybe-uninitialized" build failure in
arch/mips/kvm/tlb.c when KVM, DYNAMIC_DEBUG and JUMP_LABEL are all
enabled. The failure is:

In file included from ./include/linux/printk.h:329:0,
                 from ./include/linux/kernel.h:13,
                 from ./include/asm-generic/bug.h:15,
                 from ./arch/mips/include/asm/bug.h:41,
                 from ./include/linux/bug.h:4,
                 from ./include/linux/thread_info.h:11,
                 from ./include/asm-generic/current.h:4,
                 from ./arch/mips/include/generated/asm/current.h:1,
                 from ./include/linux/sched.h:11,
                 from arch/mips/kvm/tlb.c:13:
arch/mips/kvm/tlb.c: In function ‘kvm_mips_host_tlb_inv’:
./include/linux/dynamic_debug.h:126:3: error: ‘idx_kernel’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
   __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \
   ^~~~~~~~~~~~~~~~~~
arch/mips/kvm/tlb.c:169:16: note: ‘idx_kernel’ was declared here
  int idx_user, idx_kernel;
                ^~~~~~~~~~

There is a similar error relating to "idx_user". Both errors were
observed with GCC 6.

As far as I can tell, it is impossible for either idx_user or idx_kernel
to be uninitialized when they are later read in the calls to kvm_debug,
but to satisfy the compiler, add zero initializers to both variables.
Signed-off-by: default avatarJames Cowgill <James.Cowgill@imgtec.com>
Fixes: 57e3869c ("KVM: MIPS/TLB: Generalise host TLB invalidate to kernel ASID")
Acked-by: default avatarJames Hogan <james.hogan@imgtec.com>
Signed-off-by: default avatarRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      87ee4cdd
    • Paolo Bonzini's avatar
      KVM: x86: fix singlestepping over syscall · 3af2b32a
      Paolo Bonzini authored 
      commit c8401dda upstream.

TF is handled a bit differently for syscall and sysret, compared
to the other instructions: TF is checked after the instruction completes,
so that the OS can disable #DB at a syscall by adding TF to FMASK.
When the sysret is executed the #DB is taken "as if" the syscall insn
just completed.

KVM emulates syscall so that it can trap 32-bit syscall on Intel processors.
Fix the behavior, otherwise you could get #DB on a user stack which is not
nice.  This does not affect Linux guests, as they use an IST or task gate
for #DB.

This fixes CVE-2017-7518.
Reported-by: default avatarAndy Lutomirski <luto@kernel.org>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3af2b32a
    • Björn Töpel's avatar
      perf probe: Fix probe definition for inlined functions · 75d73538
      Björn Töpel authored 
      commit 7598f8bc upstream.

In commit 613f050d ("perf probe: Fix to probe on gcc generated
functions in modules"), the offset from symbol is, incorrectly, added
to the trace point address. This leads to incorrect probe trace points
for inlined functions and when using relative line number on symbols.

Prior this patch:
  $ perf probe -m nf_nat -D in_range
  p:probe/in_range nf_nat:in_range.isra.9+0
  $ perf probe -m i40e -D i40e_clean_rx_irq
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2212
  $ perf probe -m i40e -D i40e_clean_rx_irq:16
  p:probe/i40e_clean_rx_irq i40e:i40e_lan_xmit_frame+626

After:
  $ perf probe -m nf_nat -D in_range
  p:probe/in_range nf_nat:in_range.isra.9+0
  $ perf probe -m i40e -D i40e_clean_rx_irq
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+1106
  $ perf probe -m i40e -D i40e_clean_rx_irq:16
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2665

Committer testing:

Using 'pfunct', a tool found in the 'dwarves' package [1], one can ask what are
the functions that while not being explicitely marked as inline, were inlined
by the compiler:

  # pfunct --cc_inlined /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko | head
  __ew32
  e1000_regdump
  e1000e_dump_ps_pages
  e1000_desc_unused
  e1000e_systim_to_hwtstamp
  e1000e_rx_hwtstamp
  e1000e_update_rdt_wa
  e1000e_update_tdt_wa
  e1000_put_txbuf
  e1000_consume_page

Then ask 'perf probe' to produce the kprobe_tracer probe definitions for two of
them:

  # perf probe -m e1000e -D e1000e_rx_hwtstamp
  p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+74

  # perf probe -m e1000e -D e1000_consume_page
  p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+876
  p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+1506
  p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074

Now lets concentrate on the 'e1000_consume_page' one, that was inlined twice in
e1000_clean_jumbo_rx_irq(), lets see what readelf says about the DWARF tags for
that function:

  $ readelf -wi /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
  <SNIP>
  <1><13e27b>: Abbrev Number: 121 (DW_TAG_subprogram)
    <13e27c>   DW_AT_name        : (indirect string, offset: 0xa8945): e1000_clean_jumbo_rx_irq
    <13e287>   DW_AT_low_pc      : 0x17a30
  <3><13e6ef>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13e6f0>   DW_AT_abstract_origin: <0x13ed2c>
    <13e6f4>   DW_AT_low_pc      : 0x17be6
  <SNIP>
  <1><13ed2c>: Abbrev Number: 142 (DW_TAG_subprogram)
     <13ed2e>   DW_AT_name        : (indirect string, offset: 0xa54c3): e1000_consume_page

So, the first time in e1000_clean_jumbo_rx_irq() where e1000_consume_page() is
inlined is at PC 0x17be6, which subtracted from e1000_clean_jumbo_rx_irq()'s
address, gives us the offset we should use in the probe definition:

  0x17be6 - 0x17a30 = 438

but above we have 876, which is twice as much.

Lets see the second inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():

  <3><13e86e>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13e86f>   DW_AT_abstract_origin: <0x13ed2c>
    <13e873>   DW_AT_low_pc      : 0x17d21

  0x17d21 - 0x17a30 = 753

So we where adding it at twice the offset from the containing function as we
should.

And then after this patch:

  # perf probe -m e1000e -D e1000e_rx_hwtstamp
  p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+37

  # perf probe -m e1000e -D e1000_consume_page
  p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+438
  p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+753
  p:probe/e1000_consume_page_2 e1000e:e1000_clean_jumbo_rx_irq+1353
  #

Which matches the two first expansions and shows that because we were
doubling the offset it would spill over the next function:

  readelf -sw /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
   673: 0000000000017a30  1626 FUNC    LOCAL  DEFAULT    2 e1000_clean_jumbo_rx_irq
   674: 0000000000018090  2013 FUNC    LOCAL  DEFAULT    2 e1000_clean_rx_irq_ps

This is the 3rd inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():

   <3><13ec77>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13ec78>   DW_AT_abstract_origin: <0x13ed2c>
    <13ec7c>   DW_AT_low_pc      : 0x17f79

  0x17f79 - 0x17a30 = 1353

 So:

   0x17a30 + 2 * 1353 = 0x184c2

  And:

   0x184c2 - 0x18090 = 1074

Which explains the bogus third expansion for e1000_consume_page() to end up at:

   p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074

All fixed now :-)

[1] https://git.kernel.org/pub/scm/devel/pahole/pahole.git/Signed-off-by: default avatarBjörn Töpel <bjorn.topel@intel.com>
Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: default avatarMagnus Karlsson <magnus.karlsson@intel.com>
Acked-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Fixes: 613f050d ("perf probe: Fix to probe on gcc generated functions in modules")
Link: http://lkml.kernel.org/r/20170621164134.5701-1-bjorn.topel@gmail.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      75d73538
    • Kan Liang's avatar
      perf/x86/intel: Add 1G DTLB load/store miss support for SKL · d46eda19
      Kan Liang authored 
      commit fb3a5055 upstream.

Current DTLB load/store miss events (0x608/0x649) only counts 4K,2M and
4M page size.
Need to extend the events to support any page size (4K/2M/4M/1G).

The complete DTLB load/store miss events are:

  DTLB_LOAD_MISSES.WALK_COMPLETED		0xe08
  DTLB_STORE_MISSES.WALK_COMPLETED		0xe49
Signed-off-by: default avatarKan Liang <Kan.liang@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20170619142609.11058-1-kan.liang@intel.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d46eda19
    • Ilya Matveychikov's avatar
      lib/cmdline.c: fix get_options() overflow while parsing ranges · 1a640581
      Ilya Matveychikov authored 
      commit a91e0f68 upstream.

When using get_options() it's possible to specify a range of numbers,
like 1-100500.  The problem is that it doesn't track array size while
calling internally to get_range() which iterates over the range and
fills the memory with numbers.

Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.comSigned-off-by: default avatarIlya V. Matveychikov <matvejchikov@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1a640581
    • Jan Kara's avatar
      fs/dax.c: fix inefficiency in dax_writeback_mapping_range() · 5f83a744
      Jan Kara authored 
      commit 1eb643d0 upstream.

dax_writeback_mapping_range() fails to update iteration index when
searching radix tree for entries needing cache flushing.  Thus each
pagevec worth of entries is searched starting from the start which is
inefficient and prone to livelocks.  Update index properly.

Link: http://lkml.kernel.org/r/20170619124531.21491-1-jack@suse.cz
Fixes: 9973c98e ("dax: add support for fsync/sync")
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Reviewed-by: default avatarRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5f83a744
    • NeilBrown's avatar
      autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL · 909c2562
      NeilBrown authored 
      commit 9fa4eb8e upstream.

If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl,
autofs4_d_automount() will return

   ERR_PTR(status)

with that status to follow_automount(), which will then dereference an
invalid pointer.

So treat a positive status the same as zero, and map to ENOENT.

See comment in systemd src/core/automount.c::automount_send_ready().

Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.nameSigned-off-by: default avatarNeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      909c2562
    • Ravi Bangoria's avatar
      powerpc/perf: Fix oops when kthread execs user process · a2063a20
      Ravi Bangoria authored 
      commit bf05fc25 upstream.

When a kthread calls call_usermodehelper() the steps are:
  1. allocate current->mm
  2. load_elf_binary()
  3. populate current->thread.regs

While doing this, interrupts are not disabled. If there is a perf
interrupt in the middle of this process (i.e. step 1 has completed
but not yet reached to step 3) and if perf tries to read userspace
regs, kernel oops with following log:

  Unable to handle kernel paging request for data at address 0x00000000
  Faulting instruction address: 0xc0000000000da0fc
  ...
  Call Trace:
  perf_output_sample_regs+0x6c/0xd0
  perf_output_sample+0x4e4/0x830
  perf_event_output_forward+0x64/0x90
  __perf_event_overflow+0x8c/0x1e0
  record_and_restart+0x220/0x5c0
  perf_event_interrupt+0x2d8/0x4d0
  performance_monitor_exception+0x54/0x70
  performance_monitor_common+0x158/0x160
  --- interrupt: f01 at avtab_search_node+0x150/0x1a0
      LR = avtab_search_node+0x100/0x1a0
  ...
  load_elf_binary+0x6e8/0x15a0
  search_binary_handler+0xe8/0x290
  do_execveat_common.isra.14+0x5f4/0x840
  call_usermodehelper_exec_async+0x170/0x210
  ret_from_kernel_thread+0x5c/0x7c

Fix it by setting abi to PERF_SAMPLE_REGS_ABI_NONE when userspace
pt_regs are not set.

Fixes: ed4a4ef8 ("powerpc/perf: Add support for sampling interrupt register state")
Signed-off-by: default avatarRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: default avatarNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a2063a20
    • Kees Cook's avatar
      fs/exec.c: account for argv/envp pointers · fed07e89
      Kees Cook authored 
      commit 98da7d08 upstream.

When limiting the argv/envp strings during exec to 1/4 of the stack limit,
the storage of the pointers to the strings was not included.  This means
that an exec with huge numbers of tiny strings could eat 1/4 of the stack
limit in strings and then additional space would be later used by the
pointers to the strings.

For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721
single-byte strings would consume less than 2MB of stack, the max (8MB /
4) amount allowed, but the pointers to the strings would consume the
remaining additional stack space (1677721 * 4 == 6710884).

The result (1677721 + 6710884 == 8388605) would exhaust stack space
entirely.  Controlling this stack exhaustion could result in
pathological behavior in setuid binaries (CVE-2017-1000365).

[akpm@linux-foundation.org: additional commenting from Kees]
Fixes: b6a2fea3 ("mm: variable length argument support")
Link: http://lkml.kernel.org/r/20170622001720.GA32173@beastSigned-off-by: default avatarKees Cook <keescook@chromium.org>
Acked-by: default avatarRik van Riel <riel@redhat.com>
Acked-by: default avatarMichal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fed07e89
    • Takashi Iwai's avatar
      ALSA: hda - Apply quirks to Broxton-T, too · c8bfdd08
      Takashi Iwai authored 
      commit c7ecb906 upstream.

Broxton-T was a forgotten child and we didn't apply the quirks for
Skylake+ properly.  Meanwhile, a quirk for reducing the DMA latency
seems specific to the early Broxton model, so we leave as is.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c8bfdd08
    • Megha Dey's avatar
      ALSA: hda - Add Coffelake PCI ID · 14487f9f
      Megha Dey authored 
      commit e79b0006 upstream.

Coffelake is another Intel part, so need to add PCI ID for it.
Signed-off-by: default avatarMegha Dey <megha.dey@intel.com>
Signed-off-by: default avatarSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: default avatarVinod Koul <vinod.koul@intel.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      14487f9f
    • Takashi Iwai's avatar
      ALSA: pcm: Don't treat NULL chmap as a fatal error · e6dc243c
      Takashi Iwai authored 
      commit 2deaeaf1 upstream.

The standard PCM chmap helper callbacks treat the NULL info->chmap as
a fatal error and spews the kernel warning with stack trace when
CONFIG_SND_DEBUG is on.  This was OK, originally it was supposed to be
always static and non-NULL.  But, as the recent addition of Intel LPE
audio driver shows, the chmap content may vary dynamically, and it can
be even NULL when disconnected.  The user still sees the kernel
warning unnecessarily.

For clearing such a confusion, this patch simply removes the
snd_BUG_ON() in each place, just returns an error without warning.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e6dc243c
    • Takashi Sakamoto's avatar
      ALSA: firewire-lib: Fix stall of process context at packet error · c06718bc
      Takashi Sakamoto authored 
      commit 4a9bfafc upstream.

At Linux v3.5, packet processing can be done in process context of ALSA
PCM application as well as software IRQ context for OHCI 1394. Below is
an example of the callgraph (some calls are omitted).

ioctl(2) with e.g. HWSYNC
(sound/core/pcm_native.c)
->snd_pcm_common_ioctl1()
  ->snd_pcm_hwsync()
    ->snd_pcm_stream_lock_irq
    (sound/core/pcm_lib.c)
    ->snd_pcm_update_hw_ptr()
      ->snd_pcm_udpate_hw_ptr0()
        ->struct snd_pcm_ops.pointer()
        (sound/firewire/*)
        = Each handler on drivers in ALSA firewire stack
          (sound/firewire/amdtp-stream.c)
          ->amdtp_stream_pcm_pointer()
            (drivers/firewire/core-iso.c)
            ->fw_iso_context_flush_completions()
              ->struct fw_card_driver.flush_iso_completion()
              (drivers/firewire/ohci.c)
              = flush_iso_completions()
                ->struct fw_iso_context.callback.sc
                (sound/firewire/amdtp-stream.c)
                = in_stream_callback() or out_stream_callback()
                  ->...
    ->snd_pcm_stream_unlock_irq

When packet queueing error occurs or detecting invalid packets in
'in_stream_callback()' or 'out_stream_callback()', 'snd_pcm_stop_xrun()'
is called on local CPU with disabled IRQ.

(sound/firewire/amdtp-stream.c)
in_stream_callback() or out_stream_callback()
->amdtp_stream_pcm_abort()
  ->snd_pcm_stop_xrun()
    ->snd_pcm_stream_lock_irqsave()
    ->snd_pcm_stop()
    ->snd_pcm_stream_unlock_irqrestore()

The process is stalled on the CPU due to attempt to acquire recursive lock.

[  562.630853] INFO: rcu_sched detected stalls on CPUs/tasks:
[  562.630861]      2-...: (1 GPs behind) idle=37d/140000000000000/0 softirq=38323/38323 fqs=7140
[  562.630862]      (detected by 3, t=15002 jiffies, g=21036, c=21035, q=5933)
[  562.630866] Task dump for CPU 2:
[  562.630867] alsa-source-OXF R  running task        0  6619      1 0x00000008
[  562.630870] Call Trace:
[  562.630876]  ? vt_console_print+0x79/0x3e0
[  562.630880]  ? msg_print_text+0x9d/0x100
[  562.630883]  ? up+0x32/0x50
[  562.630885]  ? irq_work_queue+0x8d/0xa0
[  562.630886]  ? console_unlock+0x2b6/0x4b0
[  562.630888]  ? vprintk_emit+0x312/0x4a0
[  562.630892]  ? dev_vprintk_emit+0xbf/0x230
[  562.630895]  ? do_sys_poll+0x37a/0x550
[  562.630897]  ? dev_printk_emit+0x4e/0x70
[  562.630900]  ? __dev_printk+0x3c/0x80
[  562.630903]  ? _raw_spin_lock+0x20/0x30
[  562.630909]  ? snd_pcm_stream_lock+0x31/0x50 [snd_pcm]
[  562.630914]  ? _snd_pcm_stream_lock_irqsave+0x2e/0x40 [snd_pcm]
[  562.630918]  ? snd_pcm_stop_xrun+0x16/0x70 [snd_pcm]
[  562.630922]  ? in_stream_callback+0x3e6/0x450 [snd_firewire_lib]
[  562.630925]  ? handle_ir_packet_per_buffer+0x8e/0x1a0 [firewire_ohci]
[  562.630928]  ? ohci_flush_iso_completions+0xa3/0x130 [firewire_ohci]
[  562.630932]  ? fw_iso_context_flush_completions+0x15/0x20 [firewire_core]
[  562.630935]  ? amdtp_stream_pcm_pointer+0x2d/0x40 [snd_firewire_lib]
[  562.630938]  ? pcm_capture_pointer+0x19/0x20 [snd_oxfw]
[  562.630943]  ? snd_pcm_update_hw_ptr0+0x47/0x3d0 [snd_pcm]
[  562.630945]  ? poll_select_copy_remaining+0x150/0x150
[  562.630947]  ? poll_select_copy_remaining+0x150/0x150
[  562.630952]  ? snd_pcm_update_hw_ptr+0x10/0x20 [snd_pcm]
[  562.630956]  ? snd_pcm_hwsync+0x45/0xb0 [snd_pcm]
[  562.630960]  ? snd_pcm_common_ioctl1+0x1ff/0xc90 [snd_pcm]
[  562.630962]  ? futex_wake+0x90/0x170
[  562.630966]  ? snd_pcm_capture_ioctl1+0x136/0x260 [snd_pcm]
[  562.630970]  ? snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm]
[  562.630972]  ? do_vfs_ioctl+0xa3/0x610
[  562.630974]  ? vfs_read+0x11b/0x130
[  562.630976]  ? SyS_ioctl+0x79/0x90
[  562.630978]  ? entry_SYSCALL_64_fastpath+0x1e/0xad

This commit fixes the above bug. This assumes two cases:
1. Any error is detected in software IRQ context of OHCI 1394 context.
In this case, PCM substream should be aborted in packet handler. On the
other hand, it should not be done in any process context. TO distinguish
these two context, use 'in_interrupt()' macro.
2. Any error is detect in process context of ALSA PCM application.
In this case, PCM substream should not be aborted in packet handler
because PCM substream lock is acquired. The task to abort PCM substream
should be done in ALSA PCM core. For this purpose, SNDRV_PCM_POS_XRUN is
returned at 'struct snd_pcm_ops.pointer()'.
Suggested-by: default avatarClemens Ladisch <clemens@ladisch.de>
Fixes: e9148ddd("ALSA: firewire-lib: flush completed packets when reading PCM position")
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c06718bc
    • Jan Beulich's avatar
      xen-blkback: don't leak stack data via response ring · b919d2dc
      Jan Beulich authored 
      commit 089bc014 upstream.

Rather than constructing a local structure instance on the stack, fill
the fields directly on the shared ring, just like other backends do.
Build on the fact that all response structure flavors are actually
identical (the old code did make this assumption too).

This is XSA-216.
Signed-off-by: default avatarJan Beulich <jbeulich@suse.com>
Reviewed-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b919d2dc
    • Juergen Gross's avatar
      xen/blkback: fix disconnect while I/Os in flight · 7bffd6bb
      Juergen Gross authored 
      commit 46464411 upstream.

Today disconnecting xen-blkback is broken in case there are still
I/Os in flight: xen_blkif_disconnect() will bail out early without
releasing all resources in the hope it will be called again when
the last request has terminated. This, however, won't happen as
xen_blkif_free() won't be called on termination of the last running
request: xen_blkif_put() won't decrement the blkif refcnt to 0 as
xen_blkif_disconnect() didn't finish before thus some xen_blkif_put()
calls in xen_blkif_disconnect() didn't happen.

To solve this deadlock xen_blkif_disconnect() and
xen_blkif_alloc_rings() shouldn't use xen_blkif_put() and
xen_blkif_get() but use some other way to do their accounting of
resources.

This at once fixes another error in xen_blkif_disconnect(): when it
returned early with -EBUSY for another ring than 0 it would call
xen_blkif_put() again for already handled rings on a subsequent call.
This will lead to inconsistencies in the refcnt handling.
Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
Tested-by: default avatarSteven Haigh <netwiz@crc.id.au>
Acked-by: default avatarRoger Pau Monné <roger.pau@citrix.com>
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7bffd6bb
    • Boris Brezillon's avatar
      clk: sunxi-ng: sun5i: Fix ahb_bist_clk definition · 61ab4c4a
      Boris Brezillon authored 
      commit 370d9192 upstream.

AHB BIST gate is actually controlled with bit 7.

This bug was detected while trying to use the NAND controller which is
using the DMA engine to transfer data to the NAND.
Since the ahb_bist_clk gate bit conflicts with the ahb_dma_clk gate bit,
the core was disabling the DMA engine clock as part of its 'disable
unused clks' procedure, which was causing all DMA transfers to fail after
this point.

Fixes: 5e737617 ("clk: sunxi-ng: Add sun5i CCU driver")
Reported-by: default avatarAngus Ainslie <angus@akkea.ca>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: default avatarAngus Ainslie <angus@akkea.ca>
Reviewed-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMichael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1495643669-28221-1-git-send-email-boris.brezillon@free-electrons.com
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      61ab4c4a
    • Yong Deng's avatar
      clk: sunxi-ng: v3s: Fix usb otg device reset bit · 744b0f61
      Yong Deng authored 
      commit 7ffc781e upstream.

V3S's usb otg device reset bit should be 24, not 23.
Signed-off-by: default avatarYong Deng <iemdey@gmail.com>
Reviewed-By: default avatarIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      744b0f61
    • Chen-Yu Tsai's avatar
      clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset · 861b4d95
      Chen-Yu Tsai authored 
      commit 38b8f823 upstream.

The register offset for the lcd1-ch1 clock was incorrectly pointing to
the lcd0-ch1 clock. This resulted in the lcd0-ch1 clock being disabled
when the clk core disables unused clocks. This then stops the simplefb
HDMI output path.
Reported-by: default avatarBob Ham <rah@settrans.net>
Fixes: c6e6c96d ("clk: sunxi-ng: Add A31/A31s clocks")
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      861b4d95
  3. 24 Jun, 2017 20 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7