The bindings check complains that #address-cells and #size-cells
shouldn't be in the smd-edge node. Remove it.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220925173203.96117-1-luca@z3ntu.xyz

Add the interrupt for tsens, based on the information from downstream
msm-3.4 dts.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220925161317.76356-2-luca@z3ntu.xyz

Bindings mandate the use of the fallback compatible qcom,tsens-v0_1 for
msm8974. Add it to fix the warning.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220925161317.76356-1-luca@z3ntu.xyz

Add the chassis-type property to arm32 Qualcomm watches, phones and
tablets.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924154422.9896-1-luca@z3ntu.xyz

Adjust the name to match the bindings and fix the following validation
error:

<snip>/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dtb: memory@fc428000: $nodename:0: 'memory@fc428000' does not match '^sram(@.*)?'
        From schema: <snip>/Documentation/devicetree/bindings/sram/sram.yaml
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924145126.24978-1-luca@z3ntu.xyz

Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-3-dmitry.baryshkov@linaro.org

Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220924090108.166934-2-dmitry.baryshkov@linaro.org

The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable, as
TCSR mutex is actually a dedicated IO address space, and it also fixes
DT schema checks:

  qcom-msm8974-sony-xperia-rhine-amami.dtb: tcsr-mutex: 'reg' is a required property
  qcom-msm8974-sony-xperia-rhine-amami.dtb: tcsr-mutex: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz> # fairphone-fp2
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220920150414.637634-4-krzysztof.kozlowski@linaro.org

TCSR syscon node should come with dedicated compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz> # fairphone-fp2
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220920150414.637634-3-krzysztof.kozlowski@linaro.org

GPIO controller nodes are named by convention just "gpio", not "gpios".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908080938.29199-1-krzysztof.kozlowski@linaro.org

phy-names has been marked deprecated. Remove it from the msm8974 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-4-bryan.odonoghue@linaro.org

phy-names has been marked deprecated. Remove it from the apq8064 DSI
controller block.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907000105.786265-3-bryan.odonoghue@linaro.org

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-24-dmitry.baryshkov@linaro.org

On MSM8660 the PMICs are connected using SSBI devices, which do not have
any addressing scheme. Drop the unused unit ids from PMIC device nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-23-dmitry.baryshkov@linaro.org

Use labels to add device-specific properties to DT nodes rather than
duplicating SoC DT structure in the device DT.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-22-dmitry.baryshkov@linaro.org

Declare PM8058 LED devices in the main msm8660 DT file to allow them to
be used by other devices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-21-dmitry.baryshkov@linaro.org

The separate amba device node doesn't add anything significant to the
DT. The OF parsing code already creates amba_device or platform_device
depending on the compatibility lists. Drop the amba node and reorder
sdcc nodes according to node addresses.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-20-dmitry.baryshkov@linaro.org

Drop the unused unit id from the gpio-regulator node, there is no
addessing scheme in the /regulators node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-19-dmitry.baryshkov@linaro.org

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-18-dmitry.baryshkov@linaro.org

On MSM8960 the PMICs are connected using SSBI devices, which do not have
any addressing scheme. Drop the unused unit ids from PMIC device nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-17-dmitry.baryshkov@linaro.org

Fix the address of the riva-pil node. The first region address is
0x3200800, so the node should also be called riva-pil@3200800.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-16-dmitry.baryshkov@linaro.org

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-15-dmitry.baryshkov@linaro.org

On APQ8064 the PMICs are connected using SSBI devices, which do not have
any addressing scheme. Drop the unused unit ids from PMIC device nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-14-dmitry.baryshkov@linaro.org

The separate amba device node doesn't add anything significant to the
DT. The OF parsing code already creates amba_device or platform_device
depending on the compatibility lists. Drop the amba node and reorder
sdcc and sdcc bam nodes according to node addresses.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-13-dmitry.baryshkov@linaro.org

Use labels to add device-specific properties to DT nodes rather than
duplicating SoC DT structure in the device DT.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-12-dmitry.baryshkov@linaro.org

There are no need to add additional simple-bus nodes just to populate
a single pwrseq device. Pull it up one level into /. While we are at it
also fix node name replacing underscore with dash.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-11-dmitry.baryshkov@linaro.org

The 3.3V regulator is not part of the SoC, so pull it from the SoC
node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-10-dmitry.baryshkov@linaro.org

Use labels to add device-specific properties to DT nodes rather than
duplicating SoC DT structure in the device DT.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-9-dmitry.baryshkov@linaro.org

Rename ext 3p3v regulator node, fixing the 'node has a unit name, but no
reg or ranges property' warning.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-8-dmitry.baryshkov@linaro.org

Use labels to add device-specific properties to DT nodes rather than
duplicating SoC DT structure in the device DT.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-7-dmitry.baryshkov@linaro.org

There are no need to add additional simple-bus nodes just to populate
a single pwrseq device. Pull it up one level into /. While we are at it
also fix node name replacing underscore with dash.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-6-dmitry.baryshkov@linaro.org

There are no address-cells for the gpio-leds child nodes, so rename
led@1 node to led-user1.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-5-dmitry.baryshkov@linaro.org

The ext 3.3V regulator is not part of the SoC, so pull it from the SoC
node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-4-dmitry.baryshkov@linaro.org

Use labels to add device-specific properties to DT nodes rather than
duplicating SoC DT structure in the device DT.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-3-dmitry.baryshkov@linaro.org

Disable HDMI nodes. Individual board can enable them if required. The
only APQ8064 board that has working HDMI output is IFC6410, which
enables these devices explicitly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930185236.867655-2-dmitry.baryshkov@linaro.org

DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221006124659.217540-7-krzysztof.kozlowski@linaro.org

DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221006124659.217540-6-krzysztof.kozlowski@linaro.org

DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.  Schema
also requires 'function' property, so two nodes for the same gpio (mux
and config) should be merged into one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221006124659.217540-5-krzysztof.kozlowski@linaro.org

Add required gpio-ranges property to TLMM pinctrl node:

  qcom-sdx55-mtp.dtb: pinctrl@f100000: 'gpio-ranges' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221006124659.217540-4-krzysztof.kozlowski@linaro.org

Node names should be generic and new DT schema expects RPM regulators
node to be just "regulators".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926092104.111449-4-krzysztof.kozlowski@linaro.org