- 13 Nov, 2018 40 commits
-
-
Arnd Bergmann authored
commit 6a32c246 upstream. Building any configuration with 'make W=1' produces a warning: kernel/bounds.c:16:6: warning: no previous prototype for 'foo' [-Wmissing-prototypes] When also passing -Werror, this prevents us from building any other files. Nobody ever calls the function, but we can't make it 'static' either since we want the compiler output. Calling it 'main' instead however avoids the warning, because gcc does not insist on having a declaration for main. Link: http://lkml.kernel.org/r/20181005083313.2088252-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Rutland authored
commit da5a3ce6 upstream. At boot time, KVM stashes the host MDCR_EL2 value, but only does this when the kernel is not running in hyp mode (i.e. is non-VHE). In these cases, the stashed value of MDCR_EL2.HPMN happens to be zero, which can lead to CONSTRAINED UNPREDICTABLE behaviour. Since we use this value to derive the MDCR_EL2 value when switching to/from a guest, after a guest have been run, the performance counters do not behave as expected. This has been observed to result in accesses via PMXEVTYPER_EL0 and PMXEVCNTR_EL0 not affecting the relevant counters, resulting in events not being counted. In these cases, only the fixed-purpose cycle counter appears to work as expected. Fix this by always stashing the host MDCR_EL2 value, regardless of VHE. Cc: Christopher Dall <christoffer.dall@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Fixes: 1e947bad ("arm64: KVM: Skip HYP setup when already running in HYP") Tested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Punit Agrawal authored
commit fd2ef358 upstream. PageTransCompoundMap() returns true for hugetlbfs and THP hugepages. This behaviour incorrectly leads to stage 2 faults for unsupported hugepage sizes (e.g., 64K hugepage with 4K pages) to be treated as THP faults. Tighten the check to filter out hugetlbfs pages. This also leads to consistently mapping all unsupported hugepage sizes as PTE level entries at stage 2. Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Reviewed-by:
Suzuki Poulose <suzuki.poulose@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
-
Ralph Campbell authored
commit 86a2d598 upstream. In hmm_mirror_unregister(), mm->hmm is set to NULL and then mmu_notifier_unregister_no_release() is called. That creates a small window where mmu_notifier can call mmu_notifier_ops with mm->hmm equal to NULL. Fix this by first unregistering mmu notifier callbacks and then setting mm->hmm to NULL. Similarly in hmm_register(), set mm->hmm before registering mmu_notifier callbacks so callback functions always see mm->hmm set. Link: http://lkml.kernel.org/r/20181019160442.18723-4-jglisse@redhat.comSigned-off-by:
Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
Jérôme Glisse <jglisse@redhat.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Balbir Singh <bsingharora@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ralph Campbell authored
commit aab8d052 upstream. Private ZONE_DEVICE pages use a special pte entry and thus are not present. Properly handle this case in map_pte(), it is already handled in check_pte(), the map_pte() part was lost in some rebase most probably. Without this patch the slow migration path can not migrate back to any private ZONE_DEVICE memory to regular memory. This was found after stress testing migration back to system memory. This ultimatly can lead to the CPU constantly page fault looping on the special swap entry. Link: http://lkml.kernel.org/r/20181019160442.18723-3-jglisse@redhat.comSigned-off-by:
-
Mike Kravetz authored
commit 22146c3c upstream. Some test systems were experiencing negative huge page reserve counts and incorrect file block counts. This was traced to /proc/sys/vm/drop_caches removing clean pages from hugetlbfs file pagecaches. When non-hugetlbfs explicit code removes the pages, the appropriate accounting is not performed. This can be recreated as follows: fallocate -l 2M /dev/hugepages/foo echo 1 > /proc/sys/vm/drop_caches fallocate -l 2M /dev/hugepages/foo grep -i huge /proc/meminfo AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 2048 HugePages_Free: 2047 HugePages_Rsvd: 18446744073709551615 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 4194304 kB ls -lsh /dev/hugepages/foo 4.0M -rw-r--r--. 1 root root 2.0M Oct 17 20:05 /dev/hugepages/foo To address this issue, dirty pages as they are added to pagecache. This can easily be reproduced with fallocate as shown above. Read faulted pages will eventually end up being marked dirty. But there is a window where they are clean and could be impacted by code such as drop_caches. So, just dirty them all as they are added to the pagecache. Link: http://lkml.kernel.org/r/b5be45b8-5afe-56cd-9482-28384699a049@oracle.com Fixes: 6bda666a ("hugepages: fold find_or_alloc_pages into huge_no_page()") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Mihcla Hocko <mhocko@suse.com> Reviewed-by:
Khalid Aziz <khalid.aziz@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Goldwyn Rodrigues authored
commit a408e4a8 upstream. Open a new file instance as opposed to changing file->f_mode when the file is not readable. This is done to accomodate overlayfs stacked file operations change. The real struct file is hidden behind the overlays struct file. So, any file->f_mode manipulations are not reflected on the real struct file. Open the file again in read mode if original file cannot be read, read and calculate the hash. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: stable@vger.kernel.org (linux-4.19) Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
-
Eric Biggers authored
commit 1e4c8daf upstream. The 12 character temporary buffer is not necessarily long enough to hold a 'long' value. Increase it. Signed-off-by:
Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Christoph Hellwig authored
commit ae62c16e upstream. userfaultfd contains howe-grown locking of the waitqueue lock, and does not disable interrupts. This relies on the fact that no one else takes it from interrupt context and violates an invariat of the normal waitqueue locking scheme. With aio poll it is easy to trigger other locks that disable interrupts (or are called from interrupt context). Link: http://lkml.kernel.org/r/20181018154101.18750-1-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
-
Vlastimil Babka authored
commit fa76da46 upstream. Leonardo reports an apparent regression in 4.19-rc7: BUG: unable to handle kernel NULL pointer dereference at 00000000000000f0 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 6032 Comm: python Not tainted 4.19.0-041900rc7-lowlatency #201810071631 Hardware name: LENOVO 80UG/Toronto 4A2, BIOS 0XCN45WW 08/09/2018 RIP: 0010:smaps_pte_range+0x32d/0x540 Code: 80 00 00 00 00 74 a9 48 89 de 41 f6 40 52 40 0f 85 04 02 00 00 49 2b 30 48 c1 ee 0c 49 03 b0 98 00 00 00 49 8b 80 a0 00 00 00 <48> 8b b8 f0 00 00 00 e8 b7 ef ec ff 48 85 c0 0f 84 71 ff ff ff a8 RSP: 0018:ffffb0cbc484fb88 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000560ddb9e9000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000560ddb9e9 RDI: 0000000000000001 RBP: ffffb0cbc484fbc0 R08: ffff94a5a227a578 R09: ffff94a5a227a578 R10: 0000000000000000 R11: 0000560ddbbe7000 R12: ffffe903098ba728 R13: ffffb0cbc484fc78 R14: ffffb0cbc484fcf8 R15: ffff94a5a2e9cf48 FS: 00007f6dfb683740(0000) GS:ffff94a5aaf80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 000000011c118001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __walk_page_range+0x3c2/0x6f0 walk_page_vma+0x42/0x60 smap_gather_stats+0x79/0xe0 ? gather_pte_stats+0x320/0x320 ? gather_hugetlb_stats+0x70/0x70 show_smaps_rollup+0xcd/0x1c0 seq_read+0x157/0x400 __vfs_read+0x3a/0x180 ? security_file_permission+0x93/0xc0 ? security_file_permission+0x93/0xc0 vfs_read+0x8f/0x140 ksys_read+0x55/0xc0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Decoded code matched to local compilation+disassembly points to smaps_pte_entry(): } else if (unlikely(IS_ENABLED(CONFIG_SHMEM) && mss->check_shmem_swap && pte_none(*pte))) { page = find_get_entry(vma->vm_file->f_mapping, linear_page_index(vma, addr)); Here, vma->vm_file is NULL. mss->check_shmem_swap should be false in that case, however for smaps_rollup, smap_gather_stats() can set the flag true for one vma and leave it true for subsequent vma's where it should be false. To fix, reset the check_shmem_swap flag to false. There's also related bug which sets mss->swap to shmem_swapped, which in the context of smaps_rollup overwrites any value accumulated from previous vma's. Fix that as well. Note that the report suggests a regression between 4.17.19 and 4.19-rc7, which makes the 4.19 series ending with commit 258f669e ("mm: /proc/pid/smaps_rollup: convert to single value seq_file") suspicious. But the mss was reused for rollup since 493b0e9d ("mm: add /proc/pid/smaps_rollup") so let's play it safe with the stable backport. Link: http://lkml.kernel.org/r/555fbd1f-4ac9-0b58-dcd4-5dc4380ff7ca@suse.cz Link: https://bugzilla.kernel.org/show_bug.cgi?id=201377 Fixes: 493b0e9d ("mm: add /proc/pid/smaps_rollup") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Leonardo Soares Müller <leozinho29_eu@hotmail.com> Tested-by:
-
Jason A. Donenfeld authored
commit 578bdaab upstream. These are unused, undesired, and have never actually been used by anybody. The original authors of this code have changed their mind about its inclusion. While originally proposed for disk encryption on low-end devices, the idea was discarded [1] in favor of something else before that could really get going. Therefore, this patch removes Speck. [1] https://marc.info/?l=linux-crypto-vger&m=153359499015659Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ard Biesheuvel authored
commit 4a34e3c2 upstream. Use the correct __le32 annotation and accessors to perform the single round of AES encryption performed inside the AEGIS transform. Otherwise, tcrypt reports: alg: aead: Test 1 failed on encryption for aegis128-generic 00000000: 6c 25 25 4a 3c 10 1d 27 2b c1 d4 84 9a ef 7f 6e alg: aead: Test 1 failed on encryption for aegis128l-generic 00000000: cd c6 e3 b8 a0 70 9d 8e c2 4f 6f fe 71 42 df 28 alg: aead: Test 1 failed on encryption for aegis256-generic 00000000: aa ed 07 b1 96 1d e9 e6 f2 ed b5 8e 1c 5f dc 1c Fixes: f606a88e ("crypto: aegis - Add generic AEGIS AEAD implementations") Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 5a8dedfa upstream. Omit the endian swabbing when folding the lengths of the assoc and crypt input buffers into the state to finalize the tag. This is not necessary given that the memory representation of the state is in machine native endianness already. This fixes an error reported by tcrypt running on a big endian system: alg: aead: Test 2 failed on encryption for morus640-generic 00000000: a8 30 ef fb e6 26 eb 23 b0 87 dd 98 57 f3 e1 4b 00000010: 21 alg: aead: Test 2 failed on encryption for morus1280-generic 00000000: 88 19 1b fb 1c 29 49 0e ee 82 2f cb 97 a6 a5 ee 00000010: 5f Fixes: 396be41f ("crypto: morus - Add generic MORUS AEAD implementations") Cc: <stable@vger.kernel.org> # v4.18+ Reviewed-by:
-
Mikulas Patocka authored
commit a7888481 upstream. This patch fixes gcmaes_crypt_by_sg so that it won't use memory allocation if the data doesn't cross a page boundary. Authenticated encryption may be used by dm-crypt. If the encryption or decryption fails, it would result in I/O error and filesystem corruption. The function gcmaes_crypt_by_sg is using GFP_ATOMIC allocation that can fail anytime. This patch fixes the logic so that it won't attempt the failing allocation if the data doesn't cross a page boundary. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Horia Geantă authored
commit 331351f8 upstream. ghash is a keyed hash algorithm, thus setkey needs to be called. Otherwise the following error occurs: $ modprobe tcrypt mode=318 sec=1 testing speed of async ghash-generic (ghash-generic) tcrypt: test 0 ( 16 byte blocks, 16 bytes per update, 1 updates): tcrypt: hashing failed ret=-126 Cc: <stable@vger.kernel.org> # 4.6+ Fixes: 0660511c ("crypto: tcrypt - Use ahash") Tested-by:
Franck Lenormand <franck.lenormand@nxp.com> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Acked-by:
-
Ondrej Mosnacek authored
commit fbe1a850 upstream. When the LRW block counter overflows, the current implementation returns 128 as the index to the precomputed multiplication table, which has 128 entries. This patch fixes it to return the correct value (127). Fixes: 64470f1b ("[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode") Cc: <stable@vger.kernel.org> # 2.6.20+ Reported-by:
Eric Biggers <ebiggers@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
commit a3670058 upstream. While fixing an out of bounds array access in known_siginfo_layout reported by the kernel test robot it became apparent that the same bug exists in siginfo_layout and affects copy_siginfo_from_user32. The straight forward fix that makes guards against making this mistake in the future and should keep the code size small is to just take an unsigned signal number instead of a signed signal number, as I did to fix known_siginfo_layout. Cc: stable@vger.kernel.org Fixes: cc731525 ("signal: Remove kernel interal si_code magic") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit 0ab93e9c upstream. The genweq_add_file and genwqe_del_file by caching current without using reference counting embed the assumption that a file descriptor will never be passed from one process to another. It even embeds the assumption that the the thread that opened the file will be in existence when the process terminates. Neither of which are guaranteed to be true. Therefore replace caching the task_struct of the opener with pid of the openers thread group id. All the knowledge of the opener is used for is as the target of SIGKILL and a SIGKILL will kill the entire process group. Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary signal argument, update it's ownly caller, and use kill_pid instead of force_sig. The work force_sig does in changing signal handling state is not relevant to SIGKILL sent as SEND_SIG_PRIV. The exact same processess will be killed just with less work, and less confusion. The work done by force_sig is really only needed for handling syncrhonous exceptions. It will still be possible to cause genwqe_device_remove to wait 8 seconds by passing a file descriptor to another process but the possible user after free is fixed. Fixes: eaf4722d ("GenWQE Character device and DDCB queue") Cc: stable@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Frank Haverkamp <haver@linux.vnet.ibm.com> Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com> Cc: Michael Jung <mijung@gmx.net> Cc: Michael Ruettger <michael@ibmra.de> Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Eberhard S. Amann <esa@linux.vnet.ibm.com> Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
-
Bin Meng authored
commit d0c9606b upstream. Add Device IDs to the Intel GPU "spurious interrupt" quirk table. For these devices, unplugging the VGA cable and plugging it in again causes spurious interrupts from the IGD. Linux eventually disables the interrupt, but of course that disables any other devices sharing the interrupt. The theory is that this is a VGA BIOS defect: it should have disabled the IGD interrupt but failed to do so. See f67fd55f ("PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUs") and 7c82126a ("PCI: Add new ID for Intel GPU "spurious interrupt" quirk") for some history. [bhelgaas: See link below for discussion about how to fix this more generically instead of adding device IDs for every new Intel GPU. I hope this is the last patch to add device IDs.] Link: https://lore.kernel.org/linux-pci/1537974841-29928-1-git-send-email-bmeng.cn@gmail.comSigned-off-by:
Bin Meng <bmeng.cn@gmail.com> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
-
Lukas Wunner authored
commit aeae4f3e upstream. Upon removal of the last device on a bus, the link_state of the bridge leading to that bus is sought to be torn down by having pci_stop_dev() call pcie_aspm_exit_link_state(). When ASPM was originally introduced by commit 7d715a6c ("PCI: add PCI Express ASPM support"), it determined whether the device being removed is the last one by calling list_empty() on the bridge's subordinate devices list. That didn't work because the device is only removed from the list slightly later in pci_destroy_dev(). Commit 3419c75e ("PCI: properly clean up ASPM link state on device remove") attempted to fix it by calling list_is_last(), but that's not correct either because it checks whether the device is at the *end* of the list, not whether it's the last one *left* in the list. If the user removes the device which happens to be at the end of the list via sysfs but other devices are preceding the device in the list, the link_state is torn down prematurely. The real fix is to move the invocation of pcie_aspm_exit_link_state() to pci_destroy_dev() and reinstate the call to list_empty(). Remove a duplicate check for dev->bus->self because pcie_aspm_exit_link_state() already contains an identical check. Fixes: 7d715a6c ("PCI: add PCI Express ASPM support") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Vignesh R authored
commit 6d0af44a upstream. Bit positions of PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE and PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE in CTRL_CORE_SMA_SW_7 are incorrectly documented in the TRM. In fact, the bit positions are swapped. Update the DT bindings for PCIe EP to reflect the same. Fixes: d23f3839 ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Cc: stable@vger.kernel.org Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Qiuxu Zhuo authored
commit 8f189738 upstream. The code "lchan = (lchan << 1) | ~lchan" for logical channel intermediate decoding is wrong. The wrong intermediate decoding result is {0xffffffff, 0xfffffffe}. Fix it by replacing '~' with '!'. The correct intermediate decoding result is {0x1, 0x2}. Signed-off-by:
Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> CC: Aristeu Rozanski <aris@redhat.com> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20181009172025.18594-1-tony.luck@intel.comSigned-off-by:
-
Tony Luck authored
commit 432de7fd upstream. The count of errors is picked up from bits 52:38 of the machine check bank status register. But this is the count of *corrected* errors. If an uncorrected error is being logged, the h/w sets this field to 0. Which means that when edac_mc_handle_error() is called, the EDAC core will carefully add zero to the appropriate uncorrected error counts. Signed-off-by:
-
Michael Jin authored
commit 8960de4a upstream. Add new device IDs for family 17h, models 10h-2fh. This is required by amd64_edac_mod in order to properly detect PCI device functions 0 and 6. Signed-off-by:
Michael Jin <mikhail.jin@gmail.com> Reviewed-by:
Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20180816192840.31166-1-mikhail.jin@gmail.comSigned-off-by:
-
Breno Leitao authored
commit f1127439 upstream. uref->usage_index can be indirectly controlled by userspace, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This field is used as an array index by the hiddev_ioctl_usage() function, when 'cmd' is either HIDIOCGCOLLECTIONINDEX, HIDIOCGUSAGES or HIDIOCSUSAGES. For cmd == HIDIOCGCOLLECTIONINDEX case, uref->usage_index is compared to field->maxusage and then used as an index to dereference field->usage array. The same thing happens to the cmd == HIDIOC{G,S}USAGES cases, where uref->usage_index is checked against an array maximum value and then it is used as an index in an array. This is a summary of the HIDIOCGCOLLECTIONINDEX case, which matches the traditional Spectre V1 first load: copy_from_user(uref, user_arg, sizeof(*uref)) if (uref->usage_index >= field->maxusage) goto inval; i = field->usage[uref->usage_index].collection_index; return i; This patch fixes this by sanitizing field uref->usage_index before using it to index field->usage (HIDIOCGCOLLECTIONINDEX) or field->value in HIDIOC{G,S}USAGES arrays, thus, avoiding speculation in the first load. Cc: <stable@vger.kernel.org> Signed-off-by:
Breno Leitao <leitao@debian.org> v2: Contemplate cmd == HIDIOC{G,S}USAGES case Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jason Gerecke authored
commit 11db8173 upstream. The DTK-2451 and DTH-2452 have a buggy HID descriptor which incorrectly contains a Cintiq-like report, complete with pen tilt, rotation, twist, serial number, etc. The hardware doesn't actually support this data but our driver duitifully sets up the device as though it does. To ensure userspace has a correct view of devices without updated firmware, we clean up this incorrect data in wacom_setup_device_quirks. We're also careful to clear the WACOM_QUIRK_TOOLSERIAL flag since its presence causes the driver to wait for serial number information (via wacom_wac_pen_serial_enforce) that never comes, resulting in the pen being non-responsive. Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Fixes: 83417206 ("HID: wacom: Queue events with missing type/serial data for later processing") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by:
-
Stephen Smalley authored
commit 7bb185ed upstream. commit 901ef845 ("selinux: allow per-file labeling for cgroupfs") broke mounting of cgroup2 under older SELinux policies which lacked a genfscon rule for cgroup2. This prevents mounting of cgroup2 even when SELinux is permissive. Change the handling when there is no genfscon rule in policy to just mark the inode unlabeled and not return an error to the caller. This permits mounting and access if allowed by policy, e.g. to unconfined domains. I also considered changing the behavior of security_genfs_sid() to never return -ENOENT, but the current behavior is relied upon by other callers to perform caller-specific handling. Fixes: 901ef845 ("selinux: allow per-file labeling for cgroupfs") CC: <stable@vger.kernel.org> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Tested-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Theodore Ts'o authored
commit 33458eab upstream. It's possible for ext4_show_quota_options() to try reading s_qf_names[i] while it is being modified by ext4_remount() --- most notably, in ext4_remount's error path when the original values of the quota file name gets restored. Reported-by: syzbot+a2872d6feea6918008a9@syzkaller.appspotmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.2+ Signed-off-by:
-
Wang Shilong authored
commit 182a79e0 upstream. We return most failure of dquota_initialize() except inode evict, this could make a bit sense, for example we allow file removal even quota files are broken? But it dosen't make sense to allow setting project if quota files etc are broken. Signed-off-by:
Wang Shilong <wshilong@ddn.com> Signed-off-by:
-
Wang Shilong authored
commit dc7ac6c4 upstream. Currently, project quota could be changed by fssetxattr ioctl, and existed permission check inode_owner_or_capable() is obviously not enough, just think that common users could change project id of file, that could make users to break project quota easily. This patch try to follow same regular of xfs project quota: "Project Quota ID state is only allowed to change from within the init namespace. Enforce that restriction only if we are trying to change the quota ID state. Everything else is allowed in user namespaces." Besides that, check and set project id'state should be an atomic operation, protect whole operation with inode lock, ext4_ioctl_setproject() is only used for ioctl EXT4_IOC_FSSETXATTR, we have held mnt_want_write_file() before ext4_ioctl_setflags(), and ext4_ioctl_setproject() is called after ext4_ioctl_setflags(), we could share codes, so remove it inside ext4_ioctl_setproject(). Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Cc: stable@kernel.org Signed-off-by:
-
Lukas Czerner authored
commit 625ef8a3 upstream. Variable retries is not initialized in ext4_da_write_inline_data_begin() which can lead to nondeterministic number of retries in case we hit ENOSPC. Initialize retries to zero as we do everywhere else. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Theodore Ts'o authored
commit 18aded17 upstream. The code EXT4_IOC_SWAP_BOOT ioctl hasn't been updated in a while, and it's a bit broken with respect to more modern ext4 kernels, especially metadata checksums. Other problems fixed with this commit: * Don't allow installing a DAX, swap file, or an encrypted file as a boot loader. * Respect the immutable and append-only flags. * Wait until any DIO operations are finished *before* calling truncate_inode_pages(). * Don't swap inode->i_flags, since these flags have nothing to do with the inode blocks --- and it will give the IMA/audit code heartburn when the inode is evicted. Signed-off-by:
-
Al Viro authored
commit 3df629d8 upstream. get in sync with mount_bdev() handling of the same Reported-by: syzbot+c54f8e94e6bba03b04e9@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
commit ccd3c437 upstream. The code cleaning transaction's lists of checkpoint buffers has a bug where it increases bh refcount only after releasing journal->j_list_lock. Thus the following race is possible: CPU0 CPU1 jbd2_log_do_checkpoint() jbd2_journal_try_to_free_buffers() __journal_try_to_free_buffer(bh) ... while (transaction->t_checkpoint_io_list) ... if (buffer_locked(bh)) { <-- IO completes now, buffer gets unlocked --> spin_unlock(&journal->j_list_lock); spin_lock(&journal->j_list_lock); __jbd2_journal_remove_checkpoint(jh); spin_unlock(&journal->j_list_lock); try_to_free_buffers(page); get_bh(bh) <-- accesses freed bh Fix the problem by grabbing bh reference before unlocking journal->j_list_lock. Fixes: dc6e8d66 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()") Fixes: be1158cc ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()") Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com CC: stable@vger.kernel.org Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jason Gunthorpe authored
commit 9a59739b upstream. This enum has become part of the uABI, as both RXE and the ib_uverbs_post_send() command expect userspace to supply values from this enum. So it should be properly placed in include/uapi/rdma. In userspace this enum is called 'enum ibv_wr_opcode' as part of libibverbs.h. That enum defines different values for IB_WR_LOCAL_INV, IB_WR_SEND_WITH_INV, and IB_WR_LSO. These were introduced (incorrectly, it turns out) into libiberbs in 2015. The kernel has changed its mind on the numbering for several of the IB_WC values over the years, but has remained stable on IB_WR_LOCAL_INV and below. Based on this we can conclude that there is no real user space user of the values beyond IB_WR_ATOMIC_FETCH_AND_ADD, as they have never worked via rdma-core. This is confirmed by inspection, only rxe uses the kernel enum and implements the latter operations. rxe has clearly never worked with these attributes from userspace. Other drivers that support these opcodes implement the functionality without calling out to the kernel. To make IB_WR_SEND_WITH_INV and related work for RXE in userspace we choose to renumber the IB_WR enum in the kernel to match the uABI that userspace has bee using since before Soft RoCE was merged. This is an overall simpler configuration for the whole software stack, and obviously can't break anything existing. Reported-by:
Seth Howell <seth.howell@intel.com> Tested-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Artemy Kovalyov authored
commit 013c2403 upstream. Schedule MR cache work only after bucket was initialized. Cc: <stable@vger.kernel.org> # 4.10 Fixes: 49780d42 ("IB/mlx5: Expose MR cache for mlx5_ib") Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Daniel Mack authored
commit 747df197 upstream. The ESD watchdog code in sta32x_watchdog() dereferences the pointer which is never assigned. This is a regression from a1be4cea ("ASoC: sta32x: Convert to direct regmap API usage.") which went unnoticed since nobody seems to use that ESD workaround. Fixes: a1be4cea ("ASoC: sta32x: Convert to direct regmap API usage.") Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
commit 9c80c5a8 upstream. skl_tplg_get_token() misses a break in the big switch() block for SKL_TKN_U8_CORE_ID entry. Spotted nicely by -Wimplicit-fallthrough compiler option. Fixes: 6277e832 ("ASoC: Intel: Skylake: Parse vendor tokens to build module data") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dan Williams authored
commit 91ed7ac4 upstream. The driver is only initializing bb_res in the devm_memremap_pages() paths, but the raw namespace case is passing an uninitialized bb_res to nvdimm_badblocks_populate(). Fixes: e8d51348 ("memremap: change devm_memremap_pages interface...") Cc: <stable@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reported-by:
Jacek Zloch <jacek.zloch@intel.com> Reported-by:
Krzysztof Rusocki <krzysztof.rusocki@intel.com> Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit 5d394eee upstream. While experimenting with region driver loading the following backtrace was triggered: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [..] Call Trace: dump_stack+0x85/0xcb register_lock_class+0x571/0x580 ? __lock_acquire+0x2ba/0x1310 ? kernfs_seq_start+0x2a/0x80 __lock_acquire+0xd4/0x1310 ? dev_attr_show+0x1c/0x50 ? __lock_acquire+0x2ba/0x1310 ? kernfs_seq_start+0x2a/0x80 ? lock_acquire+0x9e/0x1a0 lock_acquire+0x9e/0x1a0 ? dev_attr_show+0x1c/0x50 badblocks_show+0x70/0x190 ? dev_attr_show+0x1c/0x50 dev_attr_show+0x1c/0x50 This results from a missing successful call to devm_init_badblocks() from nd_region_probe(). Block attempts to show badblocks while the region is not enabled. Fixes: 6a6bef90 ("libnvdimm: add mechanism to publish badblocks...") Cc: <stable@vger.kernel.org> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
-
