Skip to content

L
linux
Switch branch/tag
  1. 28 Oct, 2015 29 commits
  3. 27 Oct, 2015 11 commits
    • Stas Sergeev's avatar
      of_mdio: add new DT property 'managed' to specify the PHY management type · 71a386c7
      Stas Sergeev authored 
      [ Upstream commit 4cba5c21 ]

Currently the PHY management type is selected by the MAC driver arbitrary.
The decision is based on the presence of the "fixed-link" node and on a
will of the driver's authors.
This caused a regression recently, when mvneta driver suddenly started
to use the in-band status for auto-negotiation on fixed links.
It appears the auto-negotiation may not work when expected by the MAC driver.
Sebastien Rannou explains:
<< Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's
a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with
inband status) is connected to the switch through QSGMII, and in this context
we are on the media side of the PHY. >>
https://lkml.org/lkml/2015/7/10/206

This patch introduces the new string property 'managed' that allows
the user to set the management type explicitly.
The supported values are:
"auto" - default. Uses either MDIO or nothing, depending on the presence
of the fixed-link node
"in-band-status" - use in-band status
Signed-off-by: default avatarStas Sergeev <stsp@users.sourceforge.net>

CC: Rob Herring <robh+dt@kernel.org>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Florian Fainelli <f.fainelli@gmail.com>
CC: Grant Likely <grant.likely@linaro.org>
CC: devicetree@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: netdev@vger.kernel.org
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      71a386c7
    • Florian Fainelli's avatar
      net: dsa: bcm_sf2: Do not override speed settings · c0fb0993
      Florian Fainelli authored 
      [ Upstream commit d2eac98f ]

The SF2 driver currently overrides speed settings for its port
configured using a fixed PHY, this is both unnecessary and incorrect,
because we keep feedback to the hardware parameters that we read from
the PHY device, which in the case of a fixed PHY cannot possibly change
speed.

This is a required change to allow the fixed PHY code to allow
registering a PHY with a link configured as DOWN by default and avoid
some sort of circular dependency where we require the link_update
callback to run to program the hardware, and we then utilize the fixed
PHY parameters to program the hardware with the same settings.

Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      c0fb0993
    • Eric Dumazet's avatar
      tcp: add proper TS val into RST packets · 9a2c1f52
      Eric Dumazet authored 
      [ Upstream commit 675ee231 ]

RST packets sent on behalf of TCP connections with TS option (RFC 7323
TCP timestamps) have incorrect TS val (set to 0), but correct TS ecr.

A > B: Flags [S], seq 0, win 65535, options [mss 1000,nop,nop,TS val 100
ecr 0], length 0
B > A: Flags [S.], seq 2444755794, ack 1, win 28960, options [mss
1460,nop,nop,TS val 7264344 ecr 100], length 0
A > B: Flags [.], ack 1, win 65535, options [nop,nop,TS val 110 ecr
7264344], length 0

B > A: Flags [R.], seq 1, ack 1, win 28960, options [nop,nop,TS val 0
ecr 110], length 0

We need to call skb_mstamp_get() to get proper TS val,
derived from skb->skb_mstamp

Note that RFC 1323 was advocating to not send TS option in RST segment,
but RFC 7323 recommends the opposite :

  Once TSopt has been successfully negotiated, that is both <SYN> and
  <SYN,ACK> contain TSopt, the TSopt MUST be sent in every non-<RST>
  segment for the duration of the connection, and SHOULD be sent in an
  <RST> segment (see Section 5.2 for details)

Note this RFC recommends to send TS val = 0, but we believe it is
premature : We do not know if all TCP stacks are properly
handling the receive side :

   When an <RST> segment is
   received, it MUST NOT be subjected to the PAWS check by verifying an
   acceptable value in SEG.TSval, and information from the Timestamps
   option MUST NOT be used to update connection state information.
   SEG.TSecr MAY be used to provide stricter <RST> acceptance checks.

In 5 years, if/when all TCP stack are RFC 7323 ready, we might consider
to decide to send TS val = 0, if it buys something.

Fixes: 7faee5c0 ("tcp: remove TCP_SKB_CB(skb)->when")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Acked-by: default avatarYuchung Cheng <ycheng@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      9a2c1f52
    • Florian Fainelli's avatar
      net: dsa: bcm_sf2: Fix 64-bits register writes · 646cd5ed
      Florian Fainelli authored 
      [ Upstream commit 03679a14 ]

The macro to write 64-bits quantities to the 32-bits register swapped
the value and offsets arguments, we want to preserve the ordering of the
arguments with respect to how writel() is implemented for instance:
value first, offset/base second.

Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      646cd5ed
    • Atsushi Nemoto's avatar
      net: eth: altera: fix napi poll_list corruption · ca41797a
      Atsushi Nemoto authored 
      [ Upstream commit 4548a697 ]

tse_poll() calls __napi_complete() with irq enabled.  This leads napi
poll_list corruption and may stop all napi drivers working.
Use napi_complete() instead of __napi_complete().
Signed-off-by: default avatarAtsushi Nemoto <nemoto@toshiba-tops.co.jp>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      ca41797a
    • Eric Sandeen's avatar
      ext4: don't manipulate recovery flag when freezing no-journal fs · 826d518a
      Eric Sandeen authored 
      [ Upstream commit c642dc9e ]

At some point along this sequence of changes:

f6e63f90 ext4: fold ext4_nojournal_sops into ext4_sops
bb044576 ext4: support freezing ext2 (nojournal) file systems
9ca92389 ext4: Use separate super_operations structure for no_journal filesystems

ext4 started setting needs_recovery on filesystems without journals
when they are unfrozen.  This makes no sense, and in fact confuses
blkid to the point where it doesn't recognize the filesystem at all.

(freeze ext2; unfreeze ext2; run blkid; see no output; run dumpe2fs,
see needs_recovery set on fs w/ no journal).

To fix this, don't manipulate the INCOMPAT_RECOVER feature on
filesystems without journals.
Reported-by: default avatarStu Mark <smark@datto.com>
Reviewed-by: default avatarJan Kara <jack@suse.com>
Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      826d518a
    • Daniel Axtens's avatar
      cxl: Fix unbalanced pci_dev_get in cxl_probe · 5324b253
      Daniel Axtens authored 
      [ Upstream commit 2925c2fd ]

Currently the first thing we do in cxl_probe is to grab a reference
on the pci device. Later on, we call device_register on our adapter.
In our remove path, we call device_unregister, but we never call
pci_dev_put. We therefore leak the device every time we do a
reflash.

device_register/unregister is sufficient to hold the reference.
Therefore, drop the call to pci_dev_get.

Here's why this is safe.
The proposed cxl_probe(pdev) calls cxl_adapter_init:
    a) init calls cxl_adapter_alloc, which creates a struct cxl,
       conventionally called adapter. This struct contains a
       device entry, adapter->dev.

    b) init calls cxl_configure_adapter, where we set
       adapter->dev.parent = &dev->dev (here dev is the pci dev)

So at this point, the cxl adapter's device's parent is the PCI
device that I want to be refcounted properly.

    c) init calls cxl_register_adapter
       *) cxl_register_adapter calls device_register(&adapter->dev)

So now we're in device_register, where dev is the adapter device, and
we want to know if the PCI device is safe after we return.

device_register(&adapter->dev) calls device_initialize() and then
device_add().

device_add() does a get_device(). device_add() also explicitly grabs
the device's parent, and calls get_device() on it:

         parent = get_device(dev->parent);

So therefore, device_register() takes a lock on the parent PCI dev,
which is what pci_dev_get() was guarding. pci_dev_get() can therefore
be safely removed.

Fixes: f204e0b8 ("cxl: Driver code for powernv PCIe based cards for userspace access")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarDaniel Axtens <dja@axtens.net>
Acked-by: default avatarIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      5324b253
    • Shota Suzuki's avatar
      igb: Fix oops caused by missing queue pairing · 5be042b1
      Shota Suzuki authored 
      [ Upstream commit 72ddef05 ]

When initializing igb driver (e.g. 82576, I350), IGB_FLAG_QUEUE_PAIRS is
set if adapter->rss_queues exceeds half of max_rss_queues in
igb_init_queue_configuration().
On the other hand, IGB_FLAG_QUEUE_PAIRS is not set even if the number of
queues exceeds half of max_combined in igb_set_channels() when changing
the number of queues by "ethtool -L".
In this case, if numvecs is larger than MAX_MSIX_ENTRIES (10), the size
of adapter->msix_entries[], an overflow can occur in
igb_set_interrupt_capability(), which in turn leads to an oops.

Fix this problem as follows:
 - When changing the number of queues by "ethtool -L", set
   IGB_FLAG_QUEUE_PAIRS in the same way as initializing igb driver.
 - When increasing the size of q_vector, reallocate it appropriately.
   (With IGB_FLAG_QUEUE_PAIRS set, the size of q_vector gets larger.)

Another possible way to fix this problem is to cap the queues at its
initial number, which is the number of the initial online cpus. But this
is not the optimal way because we cannot increase queues when another
cpu becomes online.

Note that before commit cd14ef54 ("igb: Change to use statically
allocated array for MSIx entries"), this problem did not cause oops
but just made the number of queues become 1 because of entering msi_only
mode in igb_set_interrupt_capability().

Fixes: 907b7835 ("igb: Add ethtool support to configure number of channels")
CC: stable <stable@vger.kernel.org>
Signed-off-by: default avatarShota Suzuki <suzuki_shota_t3@lab.ntt.co.jp>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      5be042b1
    • Larry Finger's avatar
      rtlwifi: rtl8821ae: Fix an expression that is always false · e936a4c6
      Larry Finger authored 
      [ Upstream commit 251086f5 ]

In routine _rtl8821ae_set_media_status(), an incorrect mask results in a test
for AP status to always be false. Similar bugs were fixed in rtl8192cu and
rtl8192de, but this instance was missed at that time.
Reported-by: default avatarDavid Binderman <dcb314@hotmail.com>
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [3.18+]
Cc: David Binderman <dcb314@hotmail.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      e936a4c6
    • Andy Lutomirski's avatar
      x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection · 4bc532d8
      Andy Lutomirski authored 
      [ Upstream commit 810bc075 ]

We have a tricky bug in the nested NMI code: if we see RSP
pointing to the NMI stack on NMI entry from kernel mode, we
assume that we are executing a nested NMI.

This isn't quite true.  A malicious userspace program can point
RSP at the NMI stack, issue SYSCALL, and arrange for an NMI to
happen while RSP is still pointing at the NMI stack.

Fix it with a sneaky trick.  Set DF in the region of code that
the RSP check is intended to detect.  IRET will clear DF
atomically.

( Note: other than paravirt, there's little need for all this
  complexity. We could check RIP instead of RSP. )
Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
Reviewed-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      4bc532d8
    • Andy Lutomirski's avatar
      x86/nmi/64: Reorder nested NMI checks · eb0bad52
      Andy Lutomirski authored 
      [ Upstream commit a27507ca ]

Check the repeat_nmi .. end_repeat_nmi special case first.  The
next patch will rework the RSP check and, as a side effect, the
RSP check will no longer detect repeat_nmi .. end_repeat_nmi, so
we'll need this ordering of the checks.

Note: this is more subtle than it appears.  The check for
repeat_nmi .. end_repeat_nmi jumps straight out of the NMI code
instead of adjusting the "iret" frame to force a repeat.  This
is necessary, because the code between repeat_nmi and
end_repeat_nmi sets "NMI executing" and then writes to the
"iret" frame itself.  If a nested NMI comes in and modifies the
"iret" frame while repeat_nmi is also modifying it, we'll end up
with garbage.  The old code got this right, as does the new
code, but the new code is a bit more explicit.

If we were to move the check right after the "NMI executing"
check, then we'd get it wrong and have random crashes.

( Because the "NMI executing" check would jump to the code that would
  modify the "iret" frame without checking if the interrupted NMI was
  currently modifying it. )
Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
Reviewed-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
      eb0bad52
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7