1. 03 Jul, 2012 1 commit
  2. 29 Jun, 2012 1 commit
    • Alex Deucher's avatar
      drm/radeon: fix VM page table setup on SI · c21b328e
      Alex Deucher authored
      Cayman and trinity allow for variable sized VM page
      tables, but SI requires that all page tables be the
      same size.  The current code assumes variablely sized
      VM page tables so SI may end up with part of each page
      table overlapping with other memory which could end
      up being interpreted by the VM hw as garbage.
      
      Change the code to better accomodate SI.  Allocate enough
      space for at least 2 full page tables and always set
      last_pfn to max_pfn on SI so each VM is backed by a full
      page table.  This limits us to only 2 VMs active at any
      given time on SI.  This will be rectified and the code can
      be reunified once we move to two level page tables.
      Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Reviewed-by: default avatarJerome Glisse <jglisse@redhat.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      c21b328e
  3. 28 Jun, 2012 16 commits
  4. 27 Jun, 2012 17 commits
  5. 26 Jun, 2012 5 commits
    • Alexander Duyck's avatar
      ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP · 57efd44c
      Alexander Duyck authored
      FCoE target mode was experiencing issues due to the fact that we were
      sending up data frames that were padded to 60 bytes after the DDP logic had
      already stripped the frame down to 52 or 56 depending on the use of VLANs.
      This was resulting in the FCoE DDP logic having issues since it thought the
      frame still had data in it due to the padding.
      
      To resolve this, adding code so that we do not pad FCoE frames prior to
      handling them to the stack.
      
      CC: <stable@vger.kernel.org>
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
      Tested-by: default avatarRoss Brattain <ross.b.brattain@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      57efd44c
    • Eric Dumazet's avatar
      net: l2tp_eth: use LLTX to avoid LOCKDEP splats · a2842a1e
      Eric Dumazet authored
      Denys Fedoryshchenko reported a LOCKDEP issue with l2tp code.
      
      [ 8683.927442] ======================================================
      [ 8683.927555] [ INFO: possible circular locking dependency detected ]
      [ 8683.927672] 3.4.1-build-0061 #14 Not tainted
      [ 8683.927782] -------------------------------------------------------
      [ 8683.927895] swapper/0/0 is trying to acquire lock:
      [ 8683.928007]  (slock-AF_INET){+.-...}, at: [<e0fc73ec>]
      l2tp_xmit_skb+0x173/0x47e [l2tp_core]
      [ 8683.928121]
      [ 8683.928121] but task is already holding lock:
      [ 8683.928121]  (_xmit_ETHER#2){+.-...}, at: [<c02f062d>]
      sch_direct_xmit+0x36/0x119
      [ 8683.928121]
      [ 8683.928121] which lock already depends on the new lock.
      [ 8683.928121]
      [ 8683.928121]
      [ 8683.928121] the existing dependency chain (in reverse order) is:
      [ 8683.928121]
      [ 8683.928121] -> #1 (_xmit_ETHER#2){+.-...}:
      [ 8683.928121]        [<c015a561>] lock_acquire+0x71/0x85
      [ 8683.928121]        [<c034da2d>] _raw_spin_lock+0x33/0x40
      [ 8683.928121]        [<c0304e0c>] ip_send_reply+0xf2/0x1ce
      [ 8683.928121]        [<c0317dbc>] tcp_v4_send_reset+0x153/0x16f
      [ 8683.928121]        [<c0317f4a>] tcp_v4_do_rcv+0x172/0x194
      [ 8683.928121]        [<c031929b>] tcp_v4_rcv+0x387/0x5a0
      [ 8683.928121]        [<c03001d0>] ip_local_deliver_finish+0x13a/0x1e9
      [ 8683.928121]        [<c0300645>] NF_HOOK.clone.11+0x46/0x4d
      [ 8683.928121]        [<c030075b>] ip_local_deliver+0x41/0x45
      [ 8683.928121]        [<c03005dd>] ip_rcv_finish+0x31a/0x33c
      [ 8683.928121]        [<c0300645>] NF_HOOK.clone.11+0x46/0x4d
      [ 8683.928121]        [<c0300960>] ip_rcv+0x201/0x23d
      [ 8683.928121]        [<c02de91b>] __netif_receive_skb+0x329/0x378
      [ 8683.928121]        [<c02deae8>] netif_receive_skb+0x4e/0x7d
      [ 8683.928121]        [<e08d5ef3>] rtl8139_poll+0x243/0x33d [8139too]
      [ 8683.928121]        [<c02df103>] net_rx_action+0x90/0x15d
      [ 8683.928121]        [<c012b2b5>] __do_softirq+0x7b/0x118
      [ 8683.928121]
      [ 8683.928121] -> #0 (slock-AF_INET){+.-...}:
      [ 8683.928121]        [<c0159f1b>] __lock_acquire+0x9a3/0xc27
      [ 8683.928121]        [<c015a561>] lock_acquire+0x71/0x85
      [ 8683.928121]        [<c034da2d>] _raw_spin_lock+0x33/0x40
      [ 8683.928121]        [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e
      [l2tp_core]
      [ 8683.928121]        [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f
      [l2tp_eth]
      [ 8683.928121]        [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2
      [ 8683.928121]        [<c02f064c>] sch_direct_xmit+0x55/0x119
      [ 8683.928121]        [<c02e0528>] dev_queue_xmit+0x282/0x418
      [ 8683.928121]        [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c
      [ 8683.928121]        [<c031f524>] arp_xmit+0x22/0x24
      [ 8683.928121]        [<c031f567>] arp_send+0x41/0x48
      [ 8683.928121]        [<c031fa7d>] arp_process+0x289/0x491
      [ 8683.928121]        [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c
      [ 8683.928121]        [<c031f7a0>] arp_rcv+0xb1/0xc3
      [ 8683.928121]        [<c02de91b>] __netif_receive_skb+0x329/0x378
      [ 8683.928121]        [<c02de9d3>] process_backlog+0x69/0x130
      [ 8683.928121]        [<c02df103>] net_rx_action+0x90/0x15d
      [ 8683.928121]        [<c012b2b5>] __do_softirq+0x7b/0x118
      [ 8683.928121]
      [ 8683.928121] other info that might help us debug this:
      [ 8683.928121]
      [ 8683.928121]  Possible unsafe locking scenario:
      [ 8683.928121]
      [ 8683.928121]        CPU0                    CPU1
      [ 8683.928121]        ----                    ----
      [ 8683.928121]   lock(_xmit_ETHER#2);
      [ 8683.928121]                                lock(slock-AF_INET);
      [ 8683.928121]                                lock(_xmit_ETHER#2);
      [ 8683.928121]   lock(slock-AF_INET);
      [ 8683.928121]
      [ 8683.928121]  *** DEADLOCK ***
      [ 8683.928121]
      [ 8683.928121] 3 locks held by swapper/0/0:
      [ 8683.928121]  #0:  (rcu_read_lock){.+.+..}, at: [<c02dbc10>]
      rcu_lock_acquire+0x0/0x30
      [ 8683.928121]  #1:  (rcu_read_lock_bh){.+....}, at: [<c02dbc10>]
      rcu_lock_acquire+0x0/0x30
      [ 8683.928121]  #2:  (_xmit_ETHER#2){+.-...}, at: [<c02f062d>]
      sch_direct_xmit+0x36/0x119
      [ 8683.928121]
      [ 8683.928121] stack backtrace:
      [ 8683.928121] Pid: 0, comm: swapper/0 Not tainted 3.4.1-build-0061 #14
      [ 8683.928121] Call Trace:
      [ 8683.928121]  [<c034bdd2>] ? printk+0x18/0x1a
      [ 8683.928121]  [<c0158904>] print_circular_bug+0x1ac/0x1b6
      [ 8683.928121]  [<c0159f1b>] __lock_acquire+0x9a3/0xc27
      [ 8683.928121]  [<c015a561>] lock_acquire+0x71/0x85
      [ 8683.928121]  [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core]
      [ 8683.928121]  [<c034da2d>] _raw_spin_lock+0x33/0x40
      [ 8683.928121]  [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core]
      [ 8683.928121]  [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core]
      [ 8683.928121]  [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth]
      [ 8683.928121]  [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2
      [ 8683.928121]  [<c02f064c>] sch_direct_xmit+0x55/0x119
      [ 8683.928121]  [<c02e0528>] dev_queue_xmit+0x282/0x418
      [ 8683.928121]  [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2
      [ 8683.928121]  [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c
      [ 8683.928121]  [<c031f524>] arp_xmit+0x22/0x24
      [ 8683.928121]  [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2
      [ 8683.928121]  [<c031f567>] arp_send+0x41/0x48
      [ 8683.928121]  [<c031fa7d>] arp_process+0x289/0x491
      [ 8683.928121]  [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42
      [ 8683.928121]  [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c
      [ 8683.928121]  [<c031f7a0>] arp_rcv+0xb1/0xc3
      [ 8683.928121]  [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42
      [ 8683.928121]  [<c02de91b>] __netif_receive_skb+0x329/0x378
      [ 8683.928121]  [<c02de9d3>] process_backlog+0x69/0x130
      [ 8683.928121]  [<c02df103>] net_rx_action+0x90/0x15d
      [ 8683.928121]  [<c012b2b5>] __do_softirq+0x7b/0x118
      [ 8683.928121]  [<c012b23a>] ? local_bh_enable+0xd/0xd
      [ 8683.928121]  <IRQ>  [<c012b4d0>] ? irq_exit+0x41/0x91
      [ 8683.928121]  [<c0103c6f>] ? do_IRQ+0x79/0x8d
      [ 8683.928121]  [<c0157ea1>] ? trace_hardirqs_off_caller+0x2e/0x86
      [ 8683.928121]  [<c034ef6e>] ? common_interrupt+0x2e/0x34
      [ 8683.928121]  [<c0108a33>] ? default_idle+0x23/0x38
      [ 8683.928121]  [<c01091a8>] ? cpu_idle+0x55/0x6f
      [ 8683.928121]  [<c033df25>] ? rest_init+0xa1/0xa7
      [ 8683.928121]  [<c033de84>] ? __read_lock_failed+0x14/0x14
      [ 8683.928121]  [<c0498745>] ? start_kernel+0x303/0x30a
      [ 8683.928121]  [<c0498209>] ? repair_env_string+0x51/0x51
      [ 8683.928121]  [<c04980a8>] ? i386_start_kernel+0xa8/0xaf
      
      It appears that like most virtual devices, l2tp should be converted to
      LLTX mode.
      
      This patch takes care of statistics using atomic_long in both RX and TX
      paths, and fix a bug in l2tp_eth_dev_recv(), which was caching skb->data
      before a pskb_may_pull() call.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarDenys Fedoryshchenko <denys@visp.net.lb>
      Cc: James Chapman <jchapman@katalix.com>
      Cc: Hong zhi guo <honkiko@gmail.com>
      Cc: Francois Romieu <romieu@fr.zoreil.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a2842a1e
    • Craig Shelley's avatar
      USB: CP210x Add 10 Device IDs · 3fcc8f96
      Craig Shelley authored
      This patch adds 10 device IDs for CP210x based devices from the following manufacturers:
      Timewave
      Clipsal
      Festo
      Link Instruments
      Signed-off-by: default avatarCraig Shelley <craig@microtron.org.uk>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3fcc8f96
    • Forest Bond's avatar
      USB: option: Add USB ID for Novatel Ovation MC551 · 065b07e7
      Forest Bond authored
      This device is also known as the Verizon USB551L.
      Signed-off-by: default avatarForest Bond <forest.bond@rapidrollout.com>
      Acked-by: default avatarDan Williams <dcbw@redhat.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      065b07e7
    • Alexandre Pereira da Silva's avatar
      usb: phy: Fix Kconfig dependency for Phy drivers · c6156328
      Alexandre Pereira da Silva authored
      USB phy layer driver are only built if usb host is selected, but they
      are used too by USB_GADGET drivers
      Signed-off-by: default avatarAlexandre Pereira da Silva <aletes.xgr@gmail.com>
      Acked-by: default avatarRoland Stigge <stigge@antcom.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c6156328