Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

In some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually. There is at least an
SDCA extension unit DT entry we can key off.

The process of adding this is handled using a software node, firstly the
ability to add native chip selects to software nodes must be added.
Secondly, an additional flag for naming the SPI devices is added this
allows the machine driver to key to the correct amplifier. Then finally,
the cs42l43 SPI driver adds the two amplifiers directly onto its SPI
bus.

An additional series will follow soon to add the audio machine driver
parts (in the sof-sdw driver), however that is fairly orthogonal to
this part of the process, getting the actual amplifiers registered.

Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:

A couple of additional refactorings on top of the multi-CS support.
One is to make sure that the comment and the code are not disrupted
if additional changes come in the future and second one is f or the
sake of deduplication. In both cases it also makes indentation level
smaller in the affected pieces of the code.

No functional changes intended.

On some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually.

Check for the presence of the "01fa-cirrus-sidecar-instances" property
in the SDCA extension unit's ACPI properties to confirm the presence
of these two amplifiers and if they exist add them manually onto the
SPI bus.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240416100904.3738093-5-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update the name for software node based SPI devices to use the fwnode
name as the device name. This is helpful since swnode devices are
usually added within the kernel, and the kernel often then requires a
predictable name such that it can refer back to the device.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240416100904.3738093-4-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use is_acpi_device_node() rather than checking ACPI_COMPANION(), such
that when checking for other types of firmware node, the code can
consistently do checks against the fwnode.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240416100904.3738093-3-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

SPI devices can specify a cs-gpios property to enumerate their
chip selects. Under device tree, a zero entry in this property can
be used to specify that a particular chip select is using the SPI
controllers native chip select, for example:

        cs-gpios = <&gpio1 0 0>, <0>;

Here, the second chip select is native. However, when using swnodes
there is currently no way to specify a native chip select. The
proposal here is to register a swnode_gpio_undefined software node,
that can be specified to allow the indication of a native chip
select. For example:

static const struct software_node_ref_args device_cs_refs[] = {
	{
		.node  = &device_gpiochip_swnode,
		.nargs = 2,
		.args  = { 0, GPIO_ACTIVE_LOW },
	},
	{
		.node  = &swnode_gpio_undefined,
		.nargs = 0,
	},
};

Register the swnode as the gpiolib is initialised and check in
swnode_get_gpio_device() if the returned node matches
swnode_gpio_undefined and return -ENOENT, which matches the
behaviour of the device tree system when it encounters a 0 phandle.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240416100904.3738093-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

For some reason the commit 1209c556 ("spi: Consistently use BIT
for cs_index_mask") missed one place to change, do it here to finish
the job.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240415184757.1198149-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

In order of deduplication and better maintenance introduce a new
spi_for_each_valid_cs() helper macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240415193340.1279360-3-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The multi-CS support splits the comment and the code in the spi_set_cs().
To avoid this in the future extract spi_toggle_csgpiod() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240415193340.1279360-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

There is no need to allocate chip_data and then validate number of
CS pins as it will have the same effect. Hence move number of CS pins
validation out of condition in setup().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240403171550.1074644-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver.  Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154859.126931-1-krzk@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 8167bd1c ("ASoC: dt-bindings: ti,pcm1681: Convert to dtschema")
converts ti,pcm1681.txt to ti,pcm1681.yaml, but misses to adjust the file
entry in TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Adjust the file entry in TEXAS INSTRUMENTS AUDIO (ASoC/HDA) DRIVERS after
this conversion.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://msgid.link/r/20240411075803.53657-1-lukas.bulwahn@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Théo Lebrun <theo.lebrun@bootlin.com>:

This series prepares support for the embedded Cadence Quad SPI
controller on Mobileye EyeQ5.

Make cdns,fifo-depth devicetree property optional.
Value can be detected at runtime.

Upper SRAMPARTITION register bits are read-only. Procedure to find FIFO
depth is therefore to write 0xFFFFFFFF and read back to get amount of
writeable bits.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240410-cdns-qspi-mbly-v3-3-7b7053449cf7@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add Mobileye EyeQ5 compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240410-cdns-qspi-mbly-v3-2-7b7053449cf7@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Compatibles are ordered by date of addition.
Switch to (deterministic) alphabetical ordering.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240410-cdns-qspi-mbly-v3-1-7b7053449cf7@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Refactor code for "is the node's child available?" check by using the
corresponding macro instead, which reads more clearly.

While at it, use scope-based cleanup instead of manual of_node_put()
calls when getting platform data through cdns_xspi_of_get_plat_data().

This removes the unnecessary "node_child" declaration out of the loop's
scope and auto cleans up "node_child" when it goes out of scope, even
when we return early due to error.
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://msgid.link/r/20240410130205.179069-1-five231003@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

cqspi_enable_dtr() is called for each operation, commands or not, reads
or writes. It writes CQSPI_REG_CONFIG then waits for idle (three
successful reads). Skip that in the no-DTR case if DTR is already
disabled.

It cannot be skipped in the DTR case as cqspi_setup_opcode_ext() writes
to a register and we must wait for idle state.

According to ftrace, the average cqspi_exec_mem_op() call goes from
85.4µs to 83.6µs when reading 235M over UBIFS on an octal flash.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240405-cdns-qspi-mbly-v2-6-956679866d6d@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Avoid of_device_get_match_data() call on each IRQ and each read
operation. Store pointer in `struct cqspi_st` device instance.

End-to-end performance measurements improve with this patch. On a given
octal flash, reading 235M over UBIFS is ~3.4% faster. During that read,
the average cqspi_exec_mem_op() call goes from 85.4µs to 80.7µs
according to ftrace. The worst case goes from 622.4µs to 615.2µs.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240405-cdns-qspi-mbly-v2-4-956679866d6d@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Cadence QSPI Controller driver is used on Mobileye EyeQ5 platform.
Allow building on MIPS.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240405-cdns-qspi-mbly-v2-3-956679866d6d@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull x86 fixes from Ingo Molnar:

 - Fix MCE timer reinit locking

 - Fix/improve CoCo guest random entropy pool init

 - Fix SEV-SNP late disable bugs

 - Fix false positive objtool build warning

 - Fix header dependency bug

 - Fix resctrl CPU offlining bug

* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
  x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
  x86/CPU/AMD: Track SNP host status with cc_platform_*()
  x86/cc: Add cc_platform_set/_clear() helpers
  x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
  x86/coco: Require seeding RNG with RDRAND on CoCo systems
  x86/numa/32: Include missing <asm/pgtable_areas.h>
  x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline

Pull timer fixes from Ingo Molnar:
 "Fix various timer bugs:

   - Fix a timer migration bug that may result in missed events

   - Fix timer migration group hierarchy event updates

   - Fix a PowerPC64 build warning

   - Fix a handful of DocBook annotation bugs"

* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/migration: Return early on deactivation
  timers/migration: Fix ignored event due to missing CPU update
  vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
  timers: Fix text inconsistencies and spelling
  tick/sched: Fix struct tick_sched doc warnings
  tick/sched: Fix various kernel-doc warnings
  timers: Fix kernel-doc format and add Return values
  time/timekeeping: Fix kernel-doc warnings and typos
  time/timecounter: Fix inline documentation

Pull x86 perf fix from Ingo Molnar:
 "Fix a combined PEBS events bug on x86 Intel CPUs"

* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event

Pull nfsd fixes from Chuck Lever:

 - Address a slow memory leak with RPC-over-TCP

 - Prevent another NFS4ERR_DELAY loop during CREATE_SESSION

* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
  SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP

Pull i2c fix from Wolfram Sang:
 "A host driver build fix"

* tag 'i2c-for-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pxa: hide unused icr_bits[] variable

Pull xfs fix from Chandan Babu:

 - Allow creating new links to special files which were not associated
   with a project quota

* tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: allow cross-linking special files without project quota

Pull smb client fixes from Steve French:

 - fix to retry close to avoid potential handle leaks when server
   returns EBUSY

 - DFS fixes including a fix for potential use after free

 - fscache fix

 - minor strncpy cleanup

 - reconnect race fix

 - deal with various possible UAF race conditions tearing sessions down

* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
  smb: client: fix potential UAF in smb2_is_network_name_deleted()
  smb: client: fix potential UAF in is_valid_oplock_break()
  smb: client: fix potential UAF in smb2_is_valid_oplock_break()
  smb: client: fix potential UAF in smb2_is_valid_lease_break()
  smb: client: fix potential UAF in cifs_stats_proc_show()
  smb: client: fix potential UAF in cifs_stats_proc_write()
  smb: client: fix potential UAF in cifs_dump_full_key()
  smb: client: fix potential UAF in cifs_debug_files_proc_show()
  smb3: retrying on failed server close
  smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
  smb: client: handle DFS tcons in cifs_construct_tcon()
  smb: client: refresh referral without acquiring refpath_lock
  smb: client: guarantee refcounted children from parent session
  cifs: Fix caching to try to do open O_WRONLY as rdwr on server
  smb: client: fix UAF in smb2_reconnect_server()
  smb: client: replace deprecated strncpy with strscpy

srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:

  vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0

Fixes: 4535e1a4 ("x86/bugs: Fix the SRSO mitigation on Zen3/4")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405144637.17908-1-bp@kernel.org

We want to fix:

  0e110732 ("x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSO")

So merge in Linus's latest into x86/urgent to have it available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'i2c-host-fixes-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

An unused const variable kind of error has been fixed by placing
the definition of icr_bits[] inside the ifdef block where it is
used.

Merge tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "The firewire-ohci kernel module has a parameter for verbose kernel
  logging. It is well-known that it logs the spurious IRQ for bus-reset
  event due to the unmasked register for IRQ event. This update fixes
  the issue"

* tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: mask bus reset interrupts between ISR and bottom half

In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.

Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb85: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.

irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.

This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.

irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.

As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

Pull spi fixes from Mark Brown:
 "A few small driver specific fixes, the most important being the
  s3c64xx change which is likely to be hit during normal operation"

* tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe
  spi: spi-fsl-lpspi: remove redundant spi_controller_put call
  spi: s3c64xx: Use DMA mode from fifo size

Merge tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One simple regualtor fix, fixing module autoloading on tps65132"

* tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps65132: Add of_match table

Pull regmap fixes from Mark Brown:
 "Richard found a nasty corner case in the maple tree code which he
  fixed, and also fixed a compiler warning which was showing up with the
  toolchain he uses and helpfully identified a possible incorrect error
  code which could have runtime impacts"

* tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: maple: Fix uninitialized symbol 'ret' warnings
  regmap: maple: Fix cache corruption in regcache_maple_drop()

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - Atomic queue limits fixes (Christoph)
      - Fabrics fixes (Hannes, Daniel)

 - Discard overflow fix (Li)

 - Cleanup fix for null_blk (Damien)

* tag 'block-6.9-20240405' of git://git.kernel.dk/linux:
  nvme-fc: rename free_ctrl callback to match name pattern
  nvmet-fc: move RCU read lock to nvmet_fc_assoc_exists
  nvmet: implement unique discovery NQN
  nvme: don't create a multipath node for zero capacity devices
  nvme: split nvme_update_zone_info
  nvme-multipath: don't inherit LBA-related fields for the multipath node
  block: fix overflow in blk_ioctl_discard()
  nullblk: Fix cleanup order in null_add_dev() error path

Pull io_uring fixes from Jens Axboe:

 - Backport of some fixes that came up during development of the 6.10
   io_uring patches. This includes some kbuf cleanups and reference
   fixes.

 - Disable multishot read if we don't have NOWAIT support on the target

 - Fix for a dependency issue with workqueue flushing

* tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux:
  io_uring/kbuf: hold io_buffer_list reference over mmap
  io_uring/kbuf: protect io_buffer_list teardown with a reference
  io_uring/kbuf: get rid of bl->is_ready
  io_uring/kbuf: get rid of lower BGID lists
  io_uring: use private workqueue for exit work
  io_uring: disable io-wq execution of multishot NOWAIT requests
  io_uring/rw: don't allow multishot reads without NOWAIT support

Pull SCSI fixes from James Bottomley:
 "The most important is the libsas fix, which is a problem for DMA to a
  kmalloc'd structure too small causing cache line interference. The
  other fixes (all in drivers) are mostly for allocation length fixes,
  error leg unwinding, suspend races and a missing retry"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix MCQ mode dev command timeout
  scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGN
  scsi: sd: Unregister device if device_add_disk() failed in sd_probe()
  scsi: ufs: core: WLUN suspend dev/link state error recovery
  scsi: mylex: Fix sysfs buffer lengths

Pull devicetree fixes from Rob Herring:

 - Fix NIOS2 boot with external DTB

 - Add missing synchronization needed between fw_devlink and DT overlay
   removals

 - Fix some unit-address regex's to be hex only

 - Drop some 10+ year old "unstable binding" statements

 - Add new SoCs to QCom UFS binding

 - Add TPM bindings to TPM maintainers

* tag 'devicetree-fixes-for-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  nios2: Only use built-in devicetree blob if configured to do so
  dt-bindings: timer: narrow regex for unit address to hex numbers
  dt-bindings: soc: fsl: narrow regex for unit address to hex numbers
  dt-bindings: remoteproc: ti,davinci: remove unstable remark
  dt-bindings: clock: ti: remove unstable remark
  dt-bindings: clock: keystone: remove unstable remark
  of: module: prevent NULL pointer dereference in vsnprintf()
  dt-bindings: ufs: qcom: document SM6125 UFS
  dt-bindings: ufs: qcom: document SC7180 UFS
  dt-bindings: ufs: qcom: document SC8180X UFS
  of: dynamic: Synchronize of_changeset_destroy() with the devlink removals
  driver core: Introduce device_link_wait_removal()
  docs: dt-bindings: add missing address/size-cells to example
  MAINTAINERS: Add TPM DT bindings to TPM maintainers