- 04 Oct, 2006 40 commits
-
-
Eric W. Biederman authored
Currently msi.c is doing sanity checks that make certain before an irq is destroyed it has no more users. By adding irq_has_action I can perform the test is a generic way, instead of relying on a msi specific data structure. By performing the core check in dynamic_irq_cleanup I ensure every user of dynamic irqs has a test present and we don't free resources that are in use. In msi.c this allows me to kill the attrib.state member of msi_desc and all of the assciated code to maintain it. To keep from freeing data structures when irq cleanup code is called to soon changing dyanamic_irq_cleanup is insufficient because there are msi specific data structures that are also not safe to free. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Eric W. Biederman authored
This patch implements two functions ht_create_irq and ht_destroy_irq for use by drivers. Several other functions are implemented as helpers for arch specific irq_chip handlers. The driver for the card I tested this on isn't yet ready to be merged. However this code is and hypertransport irqs are in use in a few other places in the kernel. Not that any of this will get merged before 2.6.19 Because the ipath-ht400 is slightly out of spec this code will need to be generalized to work there. I think all of the powerpc uses are for a plain interrupt controller in a chipset so support for native hypertransport devices is a little less interesting. However I think this is a half way decent model on how to separate arch specific and generic helper code, and I think this is a functional model of how to get the architecture dependencies out of the msi code. [akpm@osdl.org: Kconfig fix] Signed-off-by:
-
Eric W. Biederman authored
This adds defines for the hypertransport capability subtypes and starts using them a little. [akpm@osdl.org: fix typo] Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Eric W. Biederman authored
With more irqs in the system we don't need this. Signed-off-by:
-
Eric W. Biederman authored
After raising the number of irqs the system supports this function is no longer necessary. Signed-off-by:
-
Eric W. Biederman authored
This refactors the irq handling code to make the vectors a per cpu resource so the same vector number can be simultaneously used on multiple cpus for different irqs. This should make systems that were hitting limits on the total number of irqs much more livable. [akpm@osdl.org: build fix] [akpm@osdl.org: __target_IO_APIC_irq is unneeded on UP] Signed-off-by:
-
Eric W. Biederman authored
This is a small pessimization but it paves the way for making this information per cpu. Which allows the the maximum number of IRQS to become NR_CPUS*224. Signed-off-by:
-
Eric W. Biederman authored
This patch adds support for systems that cannot receive every interrupt on a single cpu simultaneously, in the check to see if we have enough HARDIRQ_BITS. MAX_HARDIRQS_PER_CPU becomes the count of the maximum number of hardare generated interrupts per cpu. On architectures that support per cpu interrupt delivery this can be a significant space savings and scalability bonus. This patch adds support for systems that cannot receive every interrupt on Signed-off-by:
-
Eric W. Biederman authored
Because of the nasty way that CONFIG_PCI_MSI was implemented we wound up with set_irq_info and set_native_irq_info, with move_irq and move_native_irq. Both functions did the same thing but they were built and called under different circumstances. Now that the msi hacks are gone we can kill move_irq and set_irq_info. Signed-off-by:
-
Eric W. Biederman authored
This patch removes the change in behavior of the irq allocation code when CONFIG_PCI_MSI is defined. Removing all instances of the assumption that irq == vector. create_irq is rewritten to first allocate a free irq and then to assign that irq a vector. assign_irq_vector is made static and the AUTO_ASSIGN case which allocates an vector not bound to an irq is removed. The ioapic vector methods are removed, and everything now works with irqs. The definition of NR_IRQS no longer depends on CONFIG_PCI_MSI [akpm@osdl.org: cleanup] Signed-off-by:
-
Eric W. Biederman authored
This patch removes the change in behavior of the irq allocation code when CONFIG_PCI_MSI is defined. Removing all instances of the assumption that irq == vector. create_irq is rewritten to first allocate a free irq and then to assign that irq a vector. assign_irq_vector is made static and the AUTO_ASSIGN case which allocates an vector not bound to an irq is removed. The ioapic vector methods are removed, and everything now works with irqs. The definition of NR_IRQS no longer depends on CONFIG_PCI_MSI Signed-off-by:
-
Eric W. Biederman authored
After the previous changes ia64 is the only architecture useing msi-apic.c [akpm@osdl.org: unbreak MSI on ia64] Signed-off-by:
-
Eric W. Biederman authored
This removes the hardcoded assumption that irq == vector in the msi composition code, and it allows the msi message composition to setup logical mode, or lowest priorirty delivery mode as we do for other apic interrupts, and with the same selection criteria. Basically this moves the problem of what is in the msi message into the architecture irq management code where it belongs. Not in a generic layer that doesn't have enough information to compose msi messages properly. Signed-off-by:
-
Eric W. Biederman authored
This removes the hardcoded assumption that irq == vector in the msi composition code, and it allows the msi message composition to setup logical mode, or lowest priorirty delivery mode as we do for other apic interrupts, and with the same selection criteria. Basically this moves the problem of what is in the msi message into the architecture irq management code where it belongs. Not in a generic layer that doesn't have enough information to compose msi messages properly. Signed-off-by:
-
Eric W. Biederman authored
The msi currently allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. For ia64 this is fine. For x86 and x86_64 this is complete nonsense and makes an enourmous mess of the irq handling code and prevents some pretty significant cleanups in the code for handling large numbers of irqs. This patch refactors msi.c to work in terms of irqs and create_irq/destroy_irq for dynamically managing irqs. Hopefully this is finally a version of msi.c that is useful on more than just x86 derivatives. Signed-off-by:
-
Eric W. Biederman authored
The current implementation of create_irq() is a hack but it is the current hack that msi.c uses, and unfortunately the ``generic'' apic msi ops depend on this hack. Thus we are this hack of assuming irq == vector until the depencencies in the generic irq code are removed. Signed-off-by:
-
Eric W. Biederman authored
The current implementation of create_irq() is a hack but it is the current hack that msi.c uses, and unfortunately the ``generic'' apic msi ops depend on this hack. Thus we are stuck this hack of assuming irq == vector until the depencencies in the generic msi code are removed. Signed-off-by:
-
Eric W. Biederman authored
[akpm@osdl.org: build fix] Signed-off-by:
-
Eric W. Biederman authored
With the msi support comes a new concept in irq handling, irqs that are created dynamically at run time. Currently the msi code allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. This msi backwards allocator suffers from two basic problems. The allocator suffers because it is trying to do something that is architecture specific in a generic way making it brittle, inflexible, and tied to tightly to the architecture implementation. The alloctor also suffers from it's very backwards nature as it has tied things together that should have no dependencies. To solve the basic dynamic irq allocation problem two new architecture specific functions are added: create_irq and destroy_irq. create_irq takes no input and returns an unused irq number, that won't be reused until it is returned to the free poll with destroy_irq. The irq then can be used for any purpose although the only initial consumer is the msi code. destroy_irq takes an irq number allocated with create_irq and returns it to the free pool. Making this functionality per architecture increases the simplicity of the irq allocation code and increases it's flexibility. dynamic_irq_init() and dynamic_irq_cleanup() are added to automate the irq_desc initializtion that should happen for dynamic irqs. Signed-off-by:
-
Eric W. Biederman authored
Currently we attempt to predict how many irqs we will be able to allocate with msi using pci_vector_resources and some complicated accounting, and then we only allow each device as many irqs as we think are available on average. Only the s2io driver even takes advantage of this feature all other drivers have a fixed number of irqs they need and bail if they can't get them. pci_vector_resources is inaccurate if anyone ever frees an irq. The whole implmentation is racy. The current irq limit policy does not appear to make sense with current drivers. So I have simplified things. We can revisit this we we need a more sophisticated policy. Signed-off-by:
-
Eric W. Biederman authored
The current msi_ops are short sighted in a number of ways, this patch attempts to fix the glaring deficiences. - Report in msi_ops if a 64bit address is needed in the msi message, so we can fail 32bit only msi structures. - Send and receive a full struct msi_msg in both setup and target. This is a little cleaner and allows for architectures that need to modify the data to retarget the msi interrupt to a different cpu. - In target pass in the full cpu mask instead of just the first cpu in case we can make use of the full cpu mask. - Operate in terms of irqs and not vectors, currently there is still a 1-1 relationship but on architectures other than ia64 I expect this will change. Signed-off-by:
-
Eric W. Biederman authored
In support of this I also add a struct msi_msg that captures the the two address and one data field ina typical msi message, and I remember the pos and if the address is 64bit in struct msi_desc. This makes the code a little more readable and easier to maintain, and paves the way to further simplfications. Signed-off-by:
-
Eric W. Biederman authored
This allows the output of the msi tests to be stored directly in a bit field. If you don't do this a value greater than one will be truncated and become 0. Changing true to false with bizare consequences. Signed-off-by:
-
Eric W. Biederman authored
The problem. Because the disable routines leave the msi interrupts in all sorts of half enabled states the enable routines become impossible to implement correctly, and almost impossible to understand. Simplifing this allows me to simply kill the buggy reroute_msix_table, and generally makes the code more maintainable. Signed-off-by:
-
Eric W. Biederman authored
In the latest changes the code for migrating x86_64 irqs was dropped. This reads it in a fashion that will work even if we change the vector on level triggered irqs when we migrate them. [akpm@osdl.org: build fix] Signed-off-by:
-
Eric W. Biederman authored
Currently move_native_irq disables and renables the irq we are migrating to ensure we don't take that irq when we are actually doing the migration operation. Disabling the irq needs to happen but sometimes doing the work is move_native_irq is too late. On x86 with ioapics the irq move sequences needs to be: edge_triggered: mask irq. move irq. unmask irq. ack irq. level_triggered: mask irq. ack irq. move irq. unmask irq. We can easily perform the edge triggered sequence, with the current defintion of move_native_irq. However the level triggered case does not map well. For that I have added move_masked_irq, to allow me to disable the irqs around both the ack and the move. Q: Why have we not seen this problem earlier? A: The only symptom I have been able to reproduce is that if we change the vector before acknowleding an irq the wrong irq is acknowledged. Since we currently are not reprogramming the irq vector during migration no problems show up. We have to mask the irq before we acknowledge the irq or else we could hit a window where an irq is asserted just before we acknowledge it. Edge triggered irqs do not have this problem because acknowledgements do not propogate in the same way. Signed-off-by:
-
Eric W. Biederman authored
The primary aim of this patchset is to remove maintenances problems caused by the irq infrastructure. The two big issues I address are an artificially small cap on the number of irqs, and that MSI assumes vector == irq. My primary focus is on x86_64 but I have touched other architectures where necessary to keep them from breaking. - To increase the number of irqs I modify the code to look at the (cpu, vector) pair instead of just looking at the vector. With a large number of irqs available systems with a large irq count no longer need to compress their irq numbers to fit. Removing a lot of brittle special cases. For acpi guys the result is that irq == gsi. - Addressing the fact that MSI assumes irq == vector takes a few more patches. But suffice it to say when I am done none of the generic irq code even knows what a vector is. In quick testing on a large Unisys x86_64 machine we stumbled over at least one driver that assumed that NR_IRQS could always fit into an 8 bit number. This driver is clearly buggy today. But this has become a class of bugs that it is now much easier to hit. This patch: This is a minor space optimization. In practice I don't think this has any affect because of our alignment constraints and the other fields but there is not point in chewing up an uncessary word and since we already read the flag field this should improve the cache hit ratio of the irq handler. Signed-off-by:
-
Ingo Molnar authored
This patch converts all the i386 PIC controllers (except VisWS and Voyager, which I could not test - but which should still work as old-style IRQ layers) to the new and simpler irq-chip interrupt handling layer. [akpm@osdl.org: build fix] [mingo@elte.hu: enable fasteoi handler for i386 level-triggered IO-APIC irqs] Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Ingo Molnar authored
This patch converts all the x86_64 PIC controllers layers to the new and simpler irq-chip interrupt handling layer. [mingo@elte.hu: The patch also enables the fasteoi handler for x86_64] Signed-off-by:
-
Andrew Morton authored
drivers/video/riva/fbdev.c: In function `riva_get_EDID_OF': drivers/video/riva/fbdev.c:1846: warning: assignment discards qualifiers from pointer target type This code is being bad: copying a pointer to read-only OF data into a non-const pointer. Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Michael Halcrow authored
eCryptfs is a stacked cryptographic filesystem for Linux. It is derived from Erez Zadok's Cryptfs, implemented through the FiST framework for generating stacked filesystems. eCryptfs extends Cryptfs to provide advanced key management and policy features. eCryptfs stores cryptographic metadata in the header of each file written, so that encrypted files can be copied between hosts; the file will be decryptable with the proper key, and there is no need to keep track of any additional information aside from what is already in the encrypted file itself. [akpm@osdl.org: updates for ongoing API changes] [bunk@stusta.de: cleanups] [akpm@osdl.org: alpha build fix] [akpm@osdl.org: cleanups] [tytso@mit.edu: inode-diet updates] [pbadari@us.ibm.com: generic_file_*_read/write() interface updates] [rdunlap@xenotime.net: printk format fixes] [akpm@osdl.org: make slab creation and teardown table-driven] Signed-off-by:
Phillip Hellewell <phillip@hellewell.homeip.net> Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Cedric Le Goater authored
make headers_check fails on linux/nfsd/const.h. Since linux/sunrpc/msg_prot.h does not seem to export anything interesting for userspace, this patch moves it in the __KERNEL__ protected section. Signed-off-by:
Cedric Le Goater <clg@fr.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by:
-
J.Bruce Fields authored
Use all the pieces set up so far to implement referral support, allowing return of NFS4ERR_MOVED and fs_locations attribute. Signed-off-by:
Manoj Naik <manoj@almaden.ibm.com> Signed-off-by:
Fred Isaman <iisaman@citi.umich.edu> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
J.Bruce Fields authored
Encode fs_locations attribute. Signed-off-by:
-
Manoj Naik authored
Define FS locations structures, some functions to manipulate them, and add code to parse FS locations in downcall and add to the exports structure. [bfields@fieldses.org: bunch of fixes and cleanups] Signed-off-by:
-
J.Bruce Fields authored
Store the export path in the svc_export structure instead of storing only the dentry. This will prevent the need for additional d_path calls to provide NFSv4 fs_locations support. Signed-off-by:
-
NeilBrown authored
There is a possible race in d_splice_alias. Though __d_find_alias(inode, 1) will only return a dentry with DCACHE_DISCONNECTED set, it is possible for it to get cleared before the BUG_ON, and it is is not possible to lock against that. There are a couple of problems here. Firstly, the code doesn't match the comment. The comment describes a 'disconnected' dentry as being IS_ROOT as well as DCACHE_DISCONNECTED, however there is not testing of IS_ROOT anythere. A dentry is marked DCACHE_DISCONNECTED when allocated with d_alloc_anon, and remains DCACHE_DISCONNECTED while a path is built up towards the root. So a dentry can have a valid name and a valid parent and even grandparent, but will still be DCACHE_DISCONNECTED until a path to the root is created. Once the path to the root is complete, everything in the path gets DCACHE_DISCONNECTED cleared. So the fact that DCACHE_DISCONNECTED isn't enough to say that a dentry is free to be spliced in with a given name. This can only be allowed if the dentry does not yet have a name, so the IS_ROOT test is needed too. However even adding that test to __d_find_alias isn't enough. As d_splice_alias drops dcache_lock before calling d_move to perform the splice, it could race with another thread calling d_splice_alias to splice the inode in with a different name in a different part of the tree (in the case where a file has hard links). So that splicing code is only really safe for directories (as we know that directories only have one link). For directories, the caller of d_splice_alias will be holding i_mutex on the (unique) parent so there is no room for a race. A consequence of this is that a non-directory will never benefit from being spliced into a pre-exisiting dentry, but that isn't a problem. It is perfectly OK for a non-directory to have multiple dentries, some anonymous, some not. And the comment for d_splice_alias says that it only happens for directories anyway. Signed-off-by:
-
NeilBrown authored
totalram is measured in pages, not bytes, so PAGE_SHIFT must be used when trying to find 1/4096 of RAM. Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
-
NeilBrown authored
If nlm_lookup_host finds what it is looking for it exits with an extra reference on the matching 'nsm' structure. So don't actually count the reference until we are (fairly) sure it is going to be used. Signed-off-by:
-
J.Bruce Fields authored
It is legal to have zero-length NFSv4 acls; they just deny everything. Also, nfs4_acl_nfsv4_to_posix will always return with pacl and dpacl set on success, so the caller doesn't need to check this. Signed-off-by:
-
