On Sun, 7 Jun 2009, Ingo Molnar wrote:
> Testing tracer sched_switch: <6>Starting ring buffer hammer
> PASSED
> Testing tracer sysprof: PASSED
> Testing tracer function: PASSED
> Testing tracer irqsoff:
> =============================================
> PASSED
> Testing tracer preemptoff: PASSED
> Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ]
> PASSED
> Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760
> ---------------------------------------------
> rb_consumer/431 is trying to acquire lock:
>  (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70
>
> but task is already holding lock:
>  (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
>
> other info that might help us debug this:
> 1 lock held by rb_consumer/431:
>  #0:  (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0

The ring buffer is a generic structure, and can be used outside of
ftrace. If ftrace traces within the use of the ring buffer, it can produce
false positives with lockdep.

This patch passes in a static lock key into the allocation of the ring
buffer, so that different ring buffers will have their own lock class.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1244477919.13761.9042.camel@twins>

[ store key in ring buffer descriptor ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Merge branch 'tip/tracing/ftrace-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

Merge reason: this mini-topic had outstanding problems that delayed
              its merge, so it does not fast-forward.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The current method of printing out a stack trace is to add a new line
and print out the trace:

    yum-updatesd-3120  [002]   573.691303:
 => do_softirq
 => irq_exit
 => smp_apic_timer_interrupt
 => apic_timer_interrupt

This looks a bit awkward, and if we have both stack and user stack traces
running, it would be nice to have a title to tell them apart, although
it is easy to tell by the output.

This patch adds an annotation to the start of the stack traces:

            init-1     [003]   929.304979: <stack trace>
 => user_path_at
 => vfs_fstatat
 => vfs_stat
 => sys_newstat
 => system_call_fastpath

             cat-3459  [002]  1016.824040: <user stack trace>
 =>  <0000003aae6c0250>
 =>  <00007ffff4b06ae4>
 =>  <69636172742f6775>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Here is an updated patch to include the extra call to
trace_seq_init() as requested. This is vs. the latest
-tip tree and fixes the use of multiple __print_flags
and __print_symbolic in a single tracer. Also tested
to ensure its working now:

mount.gfs2-2534  [000]   235.850587: gfs2_glock_queue: 8.7 glock 1:2 dequeue PR
mount.gfs2-2534  [000]   235.850591: gfs2_demote_rq: 8.7 glock 1:0 demote EX to NL flags:DI
mount.gfs2-2534  [000]   235.850591: gfs2_glock_queue: 8.7 glock 1:0 dequeue EX
glock_workqueue-2529  [000]   235.850666: gfs2_glock_state_change: 8.7 glock 1:0 state EX => NL tgt:NL dmt:NL flags:lDpI
glock_workqueue-2529  [000]   235.850672: gfs2_glock_put: 8.7 glock 1:0 state NL => IV flags:I
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
LKML-Reference: <1244037123.29604.603.camel@localhost.localdomain>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

According to "events/ftrace/user_stack/format", fix the output of
user stack.

before fix:

  sh-1073  [000]    31.137561:  <b7f274fe> <-  <0804e33c> <-  <080835c1>

after fix:

  sh-1072  [000]    37.039329:
 =>  <b7f8a4fe>
 =>  <0804e33c>
 =>  <080835c1>
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-3-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

According to "events/ftrace/kernel_stack/format", output format of
kernel stack should use "=>" instead of "<=".

The second problem is that we shouldn't skip the first entry in the stack,
although it seems to be duplicated when used in the "function" tracer,
but events also use it. If we skip the first one, we will drop the topmost
entry of the stack.

The last problem is that if the last entry is ULONG_MAX(0xffffffff), we should
drop it, otherwise it will print a NULL name line.

before fix:

      sh-1072  [000]   26.957239: sched_process_fork: parent sh:1072 child sh:1073
      sh-1072  [000]   26.957262:
 <= syscall_call
 <=
      sh-1072  [000]   26.957744: sched_switch: task sh:1072 [120] (R) ==> sh:1073 [120]
      sh-1072  [000]   26.957752:
 <= preempt_schedule
 <= wake_up_new_task
 <= do_fork
 <= sys_clone
 <= syscall_call
 <=

After fix:

      sh-1075  [000]    39.791848: sched_process_fork: parent sh:1075  child sh:1076
      sh-1075  [000]    39.791871:
 => sys_clone
 => syscall_call
      sh-1075  [000]    39.792713: sched_switch: task sh:1075 [120] (R) ==> sh:1076 [120]
      sh-1075  [000]    39.792722:
 => schedule
 => preempt_schedule
 => wake_up_new_task
 => do_fork
 => sys_clone
 => syscall_call
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-2-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The last entry in the stack_dump_trace is ULONG_MAX, which is not
a valid entry, but max_stack_trace.nr_entries has accounted for it.
So when printing the header, we should decrease it by one.
Before fix, print as following, for example:

	Depth    Size   Location    (53 entries)	<--- should be 52
	-----    ----   --------
  0)     3264     108   update_wall_time+0x4d5/0x9a0
  ...
 51)       80      80   syscall_call+0x7/0xb
 ^^^
   it's correct.
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-1-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Every buffer page in the ring buffer includes its own time stamp.
When an event is recorded to the ring buffer with a delta time greater
than what can be held in the event header, a time stamp event is created.

If the the create timestamp falls over to the next buffer page, it is
redundant because the buffer page holds a full time stamp. This patch
will try to discard the time stamp when it falls to the start of the
next page.

This change also fixes a issues with disarding events. If most events are
discarded, timestamps will start to creep into the ring buffer. If we
do not discard the timestamps then they can fill up the ring buffer over
time and waste space.

This change will keep time stamps from filling up over another page. If
something is recorded in the buffer page, and the rest is filtered, then
the time stamps can only fill up to the end of the page.

[ Impact: prevent time stamps from filling ring buffer ]
Reported-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There are times that a race may happen that we add a timestamp in a
nested write. This timestamp would just contain a zero delta and serves
no purpose.

Now that we have a way to discard events, this patch will try to discard
the timestamp instead of just wasting the space in the ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There's a bug in ring_buffer_discard_commit.  The wrong
pointer is being compared in order to check if the event
can be freed from the buffer rather than discarded
(i.e. marked as PAD).

I noticed this when I was working on duration filtering.
The bug is not deadly - it just results in lots of wasted
space in the buffer.  All filtered events are left in
the buffer and marked as discarded, rather than being
removed from the buffer to make space for other events.

Unfortunately, when I fixed this bug, I got errors doing a
filtered function trace.  Multiple TIME_EXTEND
events pile up in the buffer, and trigger the
following loop overage warning in rb_iter_peek():

again:
	...
	if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10))
		return NULL;

I'm not sure what the best way is to fix this. I don't
know if I should extend the loop threshhold, or if I should
make the test more complex (ignore TIME_EXTEND
events), or just get rid of this loop check completely.

Note that if I implement a workaround for this, then I
see another problem from rb_advance_iter().  I haven't
tracked that one down yet.

In general, it seems like the case of removing filtered
events has not been working properly, and so some assumptions
about buffer invariant conditions need to be revisited.

Here's the patch for the simple fix:

Compare correct pointer for checking if an event can be
freed rather than left as discarded in the buffer.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
LKML-Reference: <4A25BE9E.5090909@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

A race was found that if one were to enable and disable the function
profiler repeatedly, then the system can panic. This was because a profiled
function may be preempted just before disabling interrupts. While
the profiler is disabled and then reenabled, the preempted function
could start again, and access the hash as it is being initialized.

This just adds a check in the irq disabled part to check if the profiler
is enabled, and if it is not then it will just exit.

When the system is disabled, the profile_enabled variable is cleared
before calling the unregistering of the function profiler. This
unregistering calls stop machine which also acts as a synchronize schedule.

[ Impact: fix panic in enabling/disabling function profiler ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The trace_pipe did not recognize the latency format flag and would produce
different output than the trace file. The problem was partly due that
the trace flags in the iterator was not set as well as the trace_pipe
zeros out part of the iterator (including the flags) to be able to use
the same routines as the trace file. trace_flags of the iterator should
not cause any problems when not zeroed out by for trace_pipe.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

After converting the softirq tracer to use te flags options, this
caused a regression with the name. Since the flag was used directly
it was printed out (i.e. HRTIMER_SOFTIRQ).

This patch only shows the softirq name without the SOFTIRQ part.

[ Impact: fix regression of output from softirq events ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

A patch to allow the use of __print_symbolic and __print_flags
from a module. This allows the current GFS2 tracing patch to
build.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
LKML-Reference: <1243868015.29604.542.camel@localhost.localdomain>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

__string() is limited:

  - it's a char array, but we may want to define array with other types
  - a source string should be available, but we may just know the string size

We introduce __dynamic_array() to break those limitations, and __string()
becomes a wrapper of it. As a side effect, now __get_str() can be used
in TP_fast_assign but not only TP_print.

Take XFS for example, we have the string length in the dirent, but the
string itself is not NULL-terminated, so __dynamic_array() can be used:

TRACE_EVENT(xfs_dir2,
	TP_PROTO(struct xfs_da_args *args),
	TP_ARGS(args),

	TP_STRUCT__entry(
		__field(int, namelen)
		__dynamic_array(char, name, args->namelen + 1)
		...
	),

	TP_fast_assign(
		char *name = __get_str(name);

		if (args->namelen)
			memcpy(name, args->name, args->namelen);
		name[args->namelen] = '\0';

		__entry->namelen = args->namelen;
	),

	TP_printk("name %.*s namelen %d",
		  __entry->namelen ? __get_str(name) : NULL
		  __entry->namelen)
);

[ Impact: allow defining dynamic size arrays ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2384D2.3080403@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Currently TP_fast_assign has a limitation that we can't define local
variables in it.

Here's one use case when we introduce __dynamic_array():

TP_fast_assign(
	type *p = __get_dynamic_array(item);

	foo(p);
	bar(p);
),

[ Impact: allow defining local variables in TP_fast_assign ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2384B1.90100@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

"tsize" should be "\tsize". Also remove the space before "__str_loc".

Before:
 # cat tracing/events/irq/irq_handler_entry/format
        ...
        field:int irq;  offset:12;      size:4;
        field: __str_loc name;  offset:16;tsize:2;
        ...

After:
 # cat tracing/events/irq/irq_handler_entry/format
	...
        field:int irq;  offset:12;      size:4;
        field:__str_loc name;   offset:16;      size:2;
	...

[ Impact: standardize __string field description in events format file ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Both event tracer and sched switch plugin are selected by default
by all generic tracers. But if no generic tracer is enabled, their options
appear. But ether one of them will select the other, thus it only
makes sense to have the default tracers be selected by one option.

[ Impact: clean up kconfig menu ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There are two options that are selected by all tracers, but we want
to have those options available when no tracer is selected. These are

 The event tracer and sched switch tracer.

The are enabled by all tracers, but if a tracer is not selected we want
the options to appear. All tracers including them select TRACING.
Thus what we would like to do is:

  config EVENT_TRACER
	bool "prompt"
	depends on TRACING
	select TRACING

But that gives us a bug in the kbuild system since we just created a
circular dependency. We only want the prompt to show when TRACING is off.

This patch adds GENERIC_TRACER that all tracers will select instead of
TRACING. The two options (sched switch and event tracer) will select
TRACING directly and depend on !GENERIC_TRACER. This solves the cicular
dependency.

[ Impact: hide options that are selected by default ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When using ftrace=function on the command line to trace functions
on boot up, one can not filter out functions that are commonly called.

This patch adds two new ftrace command line commands.

  ftrace_notrace=function-list
  ftrace_filter=function-list

Where function-list is a comma separated list of functions to filter.
The ftrace_notrace will make the functions listed not be included
in the function tracing, and ftrace_filter will only trace the functions
listed.

These two act the same as the debugfs/tracing/set_ftrace_notrace and
debugfs/tracing/set_ftrace_filter respectively.

The simple glob expressions that are allowed by the filter files can also
be used by the command line interface.

	ftrace_notrace=rcu*,*lock,*spin*

Will not trace any function that starts with rcu, ends with lock, or has
the word spin in it.

Note, if the self tests are enabled, they may interfere with the filtering
set by the command lines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

register_stat_tracer() uses list_for_each_entry_safe
to check whether a tracer is already present in the list.
But we don't delete anything from the list here, so
we don't need the safe version

[ Impact: cleanup list use is stat tracing ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

- remove duplicate code in stat_seq_init()
- update comments to reflect the change from stat list to stat rbtree

[ Impact: clean up ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

When closing a trace_stat file, we destroy the rbtree constructed during
file open, but there is memory leak that the root node is not freed.

[ Impact: fix memory leak when closing a trace_stat file ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

Currently the output of trace_stat/workqueues is totally reversed:

 # cat /debug/tracing/trace_stat/workqueues
    ...
    1       17       17      210       37   `-blk_unplug_work+0x0/0x57
    1     3779     3779      181       11   |-cfq_kick_queue+0x0/0x2f
    1     3796     3796                     kblockd/1:120
    ...

The correct output should be:

    1     3796     3796                     kblockd/1:120
    1     3779     3779      181       11   |-cfq_kick_queue+0x0/0x2f
    1       17       17      210       37   `-blk_unplug_work+0x0/0x57

It's caused by "tracing/stat: replace linked list by an rbtree for
sorting"
(53059c9b67a62a3dc8c80204d3da42b9267ea5a0).

dummpy_cmp() should return -1, so rb_node will always be inserted as
right-most node in the rbtree, thus we sort the output in ascending
order.

[ Impact: fix the output of trace_stat/workqueues ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

When the stat tracing framework prepares the entries from a tracer
to output them to the user, it starts by computing a linear sort
through a linked list to give the entries ordered by relevance
to the user.

This is quite ugly and causes a small latency when we begin to
read the file.

This patch changes that by turning the linked list into a red-black
tree. Athough the whole iteration using the start and next tracer
callbacks while opening the file remain the same, it is now much
more fast and scalable.

The rbtree guarantees O(log(n)) insertions whereas a linked
list with linear sorting brought us a O(n) despair. Now the
(visible) latency has disapeared.

[ Impact: kill the latency while starting to read a stat tracer file ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

The "trace" prefix in struct trace_stat_session type is annoying while
reading the trace_stat.c file. It makes the lines longer, and
is not that much useful to explain the sense of this type.

Just keep "struct stat_session" for this type.

[ Impact: make the code a bit more readable ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

The blankline between each cpu's workqueue stat is not necessary, because
the cpu number is enough to part them by eye.
Old style also caused a blankline below headline, and made code complex
by using lock, disableirq and get cpu var.

Old style:
 # CPU  INSERTED  EXECUTED   NAME
 # |      |         |          |

   0   8644       8644       events/0
   0      0          0       cpuset
   ...
   0      1          1       kdmflush

   1  35365      35365       events/1
   ...

New style:
 # CPU  INSERTED  EXECUTED   NAME
 # |      |         |          |

   0   8644       8644       events/0
   0      0          0       cpuset
   ...
   0      1          1       kdmflush
   1  35365      35365       events/1
   ...

[ Impact: provide more readable code ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

cpu_workqueue_stats->first_entry is useless because we can retrieve the
header of a cpu workqueue using:
if (&cpu_workqueue_stats->list == workqueue_cpu_stat(cpu)->list.next)

[ Impact: cleanup ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

No need to use list_for_each_entry_safe() in iteration without deleting
any node, we can use list_for_each_entry() instead.

[ Impact: cleanup ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

v3: zhaolei@cn.fujitsu.com: Change TRACE_EVENT definition to new format
    introduced by Steven Rostedt: consolidate trace and trace_event headers
v2: kosaki@jp.fujitsu.com: print the function names instead of addr, and zap
    the work addr
v1: zhaolei@cn.fujitsu.com: Make workqueue tracepoints use TRACE_EVENT macro

TRACE_EVENT is a more generic way to define tracepoints.
Doing so adds these new capabilities to the tracepoints:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions

Then, this patch converts DEFINE_TRACE to TRACE_EVENT in workqueue related
tracepoints.

[ Impact: expand workqueue tracer to events tracing ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

"call" is an argument of macro, but it is also used as a local
variable name of function in macro.
We should keep this local variable name distinct from any
CPP macro parameter name if both are in the same macro scope,
although it hasn't caused any problem yet.

[ Impact: robustify macro ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

s390 code uses smp_processor_id() in __raw_spin_lock() code which
reveals that a (raw) spinlock is taken without preemption disabled.
This can potentially deadlock.

To fix this explicitly disable and enable preemption.

BUG: using smp_processor_id() in preemptible [00000000] code: cat/2278
caller is trace_find_cmdline+0x40/0xfc
CPU: 0 Not tainted 2.6.30-rc7-dirty #39
Process cat (pid: 2278, task: 000000003faedb68, ksp: 000000003b33b988)
000000003b33b988 000000003b33bae0 0000000000000002 0000000000000000
       000000003b33bb80 000000003b33baf8 000000003b33baf8 00000000000175d6
       0000000000000001 000000003b33b988 000000003f9b0000 000000000000000b
       000000000000000c 000000003b33bb40 000000003b33bae0 0000000000000000
       0000000000000000 00000000000175d6 000000003b33bae0 000000003b33bb28
Call Trace:
([<00000000000174b2>] show_trace+0x112/0x170)
 [<0000000000017582>] show_stack+0x72/0x100
 [<0000000000441538>] dump_stack+0xc8/0xd8
 [<000000000025c350>] debug_smp_processor_id+0x114/0x130
 [<00000000000bf0e4>] trace_find_cmdline+0x40/0xfc
 [<00000000000c35d4>] trace_print_context+0x58/0xac
 [<00000000000bb676>] print_trace_line+0x416/0x470
 [<00000000000bc8fe>] s_show+0x4e/0x428
 [<000000000013834e>] seq_read+0x36a/0x5d4
 [<0000000000112a78>] vfs_read+0xc8/0x174
 [<0000000000112c58>] SyS_read+0x74/0xc4
 [<000000000002c7ae>] sysc_noemu+0x10/0x16
 [<000002000012436c>] 0x2000012436c
1 lock held by cat/2278:
 #0:  (&p->lock){+.+.+.}, at: [<0000000000138056>] seq_read+0x72/0x5d4

[ Impact: fix preempt-unsafe raw spinlock ]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

The recording of the names at trace time is inefficient. This patch
implements the softirq event recording to only record the vector
and then use the __print_symbolic interface to print out the names.

[ Impact: faster recording of softirq events ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

This patch adds __print_symbolic which is similar to __print_flags but
works for an enumeration type instead. That is, there is only a one to one
mapping between the values and the symbols. When a match is made, then
it is printed, otherwise the hex value is outputed.

[ Impact: add interface for showing symbol names in events ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

This patch changes the output for gfp_flags from being a simple hex value
to the actual names.

  gfp_flags=GFP_ATOMIC  instead of gfp_flags=00000020

And even

  gfp_flags=GFP_KERNEL instead of gfp_flags=000000d0

(Thanks to Frederic Weisbecker for pointing out that the first version
 had a bad order of GFP masks)

[ Impact: more human readable output from tracer ]
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

It is useful to see the state of a task that is being switched out.
This patch adds the output of the state of the previous task in
the context switch event.

[ Impact: see state of switched out task in context switch ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

Developers have been asking for the ability in the ftrace event tracer
to display names of bits in a flags variable.

Instead of printing out c2, it would be easier to read FOO|BAR|GOO,
assuming that FOO is bit 1, BAR is bit 6 and GOO is bit 7.

Some examples where this would be useful are the state flags in a context
switch, kmalloc flags, and even permision flags in accessing files.

[
  v2 changes include:

  Frederic Weisbecker's idea of using a mask instead of bits,
  thus we can output GFP_KERNEL instead of GPF_WAIT|GFP_IO|GFP_FS.

  Li Zefan's idea of allowing the caller of __print_flags to add their
  own delimiter (or no delimiter) where we can get for file permissions
  rwx instead of r|w|x.
]

[
  v3 changes:

   Christoph Hellwig's idea of using an array instead of va_args.
]

[ Impact: better displaying of flags in trace output ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

Always use ftrace_event_enable_disable() to enable/disable an event
so that we can factorize out the event toggling code.

[ Impact: factorize and cleanup event tracing code ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

If we enable a trace event alone without any tracer running (such as
function tracer, sched switch tracer, etc...) it can't output enough
task command information.

We need to use the tracing_{start/stop}_cmdline_record() helpers
which are designed to keep track of cmdlines for any tasks that
were scheduled during the tracing.

Before this patch:
 # echo 1 > debugfs/tracing/events/sched/sched_switch/enable
 # cat debugfs/tracing/trace
 # tracer: nop
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
            <...>-2289  [000] 526276.724790: sched_switch: task bash:2289 [120] ==> sshd:2287 [120]
            <...>-2287  [000] 526276.725231: sched_switch: task sshd:2287 [120] ==> bash:2289 [120]
            <...>-2289  [000] 526276.725452: sched_switch: task bash:2289 [120] ==> sshd:2287 [120]
            <...>-2287  [000] 526276.727181: sched_switch: task sshd:2287 [120] ==> swapper:0 [140]
           <idle>-0     [000] 526277.032734: sched_switch: task swapper:0 [140] ==> events/0:5 [115]
            <...>-5     [000] 526277.032782: sched_switch: task events/0:5 [115] ==> swapper:0 [140]
 ...

After this patch:
 # tracer: nop
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
             bash-2269  [000] 527347.989229: sched_switch: task bash:2269 [120] ==> sshd:2267 [120]
             sshd-2267  [000] 527347.990960: sched_switch: task sshd:2267 [120] ==> bash:2269 [120]
             bash-2269  [000] 527347.991143: sched_switch: task bash:2269 [120] ==> sshd:2267 [120]
             sshd-2267  [000] 527347.992959: sched_switch: task sshd:2267 [120] ==> swapper:0 [140]
           <idle>-0     [000] 527348.531989: sched_switch: task swapper:0 [140] ==> events/0:5 [115]
         events/0-5     [000] 527348.532115: sched_switch: task events/0:5 [115] ==> swapper:0 [140]
 ...

Changelog:
v1->v2: Update Kconfig to select CONTEXT_SWITCH_TRACER in
        ENABLE_EVENT_TRACING
v2->v3: v2 can solve problem that was caused by config EVENT_TRACING
        alone, but when CONFIG_FTRACE is off and CONFIG_TRACING is
        selected by other config, compile fail happened again.
        This version solves it.

[ Impact: fix incomplete output of event tracing ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>