- 18 Sep, 2022 1 commit
-
-
Hans de Goede authored
Refactor backlight support so that the gma_backlight_enable() / gma_backlight_disable() / gma_backlight_set() functions used by the Opregion handle will also work if no backlight_device gets registered. This is a preparation patch for not registering the gma500's own backlight device when acpi_video should be used, since registering 2 backlight devices for a single display really is undesirable. Since the acpi-video interface often uses the OpRegion we need to keep the OpRegion functional even when dev_priv->backlight_device is NULL. As a result of this refactor the actual backlight_device_register() call is moved to the shared backlight.c code and all #ifdefs related to CONFIG_BACKLIGHT_CLASS_DEVICE are now also limited to backlight.c . No functional changes intended. This has been tested on a Packard Bell Dot SC (Intel Atom N2600, cedarview) and a Sony Vaio vpc-x11s1e (Intel N540, poulsbo) laptop. Changes in v2: - Fix unused variable warnings when CONFIG_BACKLIGHT is not selected by marking the 2 variables as __maybe_unused. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-2-hdegoede@redhat.com
-
- 17 Sep, 2022 9 commits
-
-
Maya Matuszczyk authored
Yet another x86 gaming handheld. This one has many SKUs with quite a few of DMI strings, so let's just use a catchall, just as with Aya Neo Next. Signed-off-by:
Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by:
-
Hans de Goede authored
The psb_runtime_suspend/resume/thaw/freeze/restore functions are all just 1:1 wrappers around gma_power_suspend/_resume. Drop these wrappers and use the DEFINE_RUNTIME_DEV_PM_OPS() macro to define the dev_pm_ops struct. Signed-off-by:
-
Hans de Goede authored
Rewrite the power.c code. For some reason this was doing locking + refcounting + state (suspended or not) bookkeeping all by itself. But there is no reason for this, this is all taken care of by the runtime-pm core, through pm_runtime_get()/_put(). Besides this not being necessary the DIY code is also quite weird/ buggy in some places. E.g. power_begin() would manually do a resume when not resumed already and force_on=true, followed by a pm_runtime_get(), which will cause a call to gma_power_resume() to get scheduled which would redo the entire resume again. Which can all be replaced by a single pm_runtime_get_sync() call. Note that this is just a cleanup, this does not actually fix the (disabled through #if 0) runtime-pm support. It does now call pm_runtime_enable(), but only after doing a pm_runtime_get() at probe-time, so the device is never runtime suspended. Doing this permanent get() + enable() instead of not calling enable() at all is necessary for the pm_runtime_get_if_in_use() call in gma_power_begin() to work properly. Note this also removes the gma_power_is_on() call a check like this without actually holding a reference is always racy, so it is a bad idea (and therefor has no pm_runtime_foo() equivalent). The 2 code paths which were using gma_power_is_on() are actually both guaranteed to only run when the device is powered-on so the 2 checks can simply be dropped. Signed-off-by:
-
Hans de Goede authored
The gma_crtc_set_config() and psb_unlocked_ioctl() functions are 1:1 wrappers for drm_helpers. Drop these wrappers. Signed-off-by:
-
Hans de Goede authored
The rpm_enabled flag is never set, remove it. Signed-off-by:
-
Hans de Goede authored
runtime_allowed is initialized to 0, so the runtime_allowed == 1 condition is never true making this dead code. Remove it. Signed-off-by:
-
Hans de Goede authored
Fix gnome-shell (and other page-flip users) hanging after suspend/resume because of the gma500's IRQs not working. This fixes 2 problems with the IRQ handling: 1. gma_power_off() calls gma_irq_uninstall() which does a free_irq(), but gma_power_on() called gma_irq_preinstall() + gma_irq_postinstall() which do not call request_irq. Replace the pre- + post-install calls with gma_irq_install() which does prep + request + post. 2. After fixing 1. IRQs still do not work on a Packard Bell Dot SC (Intel Atom N2600, cedarview) netbook. Cederview uses MSI interrupts and it seems that the BIOS re-configures things back to normal APIC based interrupts during S3 suspend. There is some MSI PCI-config registers save/restore code which tries to deal with this, but on the Packard Bell Dot SC this is not sufficient to restore MSI IRQ functionality after a suspend/resume. Replace the PCI-config registers save/restore with pci_disable_msi() on suspend + pci_enable_msi() on resume. Fixing e.g. gnome-shell hanging. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'the'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by:
-
Maya Matuszczyk authored
This device is another x86 gaming handheld, and as (hopefully) there is only one set of DMI IDs it's using DMI_EXACT_MATCH Signed-off-by:
-
- 16 Sep, 2022 6 commits
-
-
Javier Martinez Canillas authored
Provides a default plane state check handler for primary planes that are a fullscreen scanout buffer and whose state scale and position can't change. There are some drivers that duplicate this logic in their helpers, such as simpledrm and ssd130x. Factor out this common code into a plane helper and make drivers use it. Suggested-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Arvind Yadav authored
Using the parent fence instead of the finished fence to get the job status. This change is to avoid GPU scheduler timeout error which can cause GPU reset. Signed-off-by:
Arvind Yadav <Arvind.Yadav@amd.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-6-Arvind.Yadav@amd.comSigned-off-by:
Christian König <christian.koenig@amd.com>
-
Arvind Yadav authored
dma_fence_wait() should always enable signaling even when the fence is already signaled. Signed-off-by:
-
Arvind Yadav authored
Here's enabling software signaling on fence for selftest. Signed-off-by:
-
Arvind Yadav authored
Here's setting software signaling bit for the stub fence which is always signaled. If this fence signaling bit is not set then the AMD GPU scheduler will cause a GPU reset due to a GPU scheduler cleanup activity timeout. Signed-off-by:
-
Arvind Yadav authored
Remove the signaled bit status check because it is returning early when the fence is already signaled and __dma_fence_enable_signaling is checking the status of signaled bit again. Signed-off-by:
-
- 15 Sep, 2022 3 commits
-
-
Tom Rix authored
cppcheck reports [drivers/gpu/drm/rockchip/rockchip_drm_vop.c:186]: (style) The function 'vop_writel' is never used. vop_writel is static function that is not used, so remove it. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220521190716.1936193-1-trix@redhat.com
-
Hugh Cole-Baker authored
The RK3399 has a 1024-entry gamma LUT with 10 bits per component on its "big" VOP and a 256-entry, 8 bit per component LUT on the "little" VOP. Compared to the RK3288, it no longer requires disabling gamma while updating the LUT. On the RK3399, the LUT can be updated at any time as the hardware has two LUT buffers, one can be written while the other is in use. A swap of the buffers is triggered by writing 1 to the update_gamma_lut register. Signed-off-by:
Hugh Cole-Baker <sigmaris@gmail.com> Tested-by:
"Milan P. Stanić" <mps@arvanta.net> Tested-by:
Linus Heckemann <git@sphalerite.org> Signed-off-by:
-
Hugh Cole-Baker authored
The VOP on RK3399 has a different approach from previous versions for setting a gamma lookup table, using an update_gamma_lut register. As this differs from RK3288, give RK3399 its own set of "common" register definitions. Signed-off-by:
-
- 14 Sep, 2022 4 commits
-
-
Maíra Canal authored
With the introduction of KUnit, IGT is no longer the only option to run the DRM unit tests, as the tests can be run through kunit-tool or on real hardware with CONFIG_KUNIT. Therefore, remove the "igt_" prefix from the tests and replace it with the "drm_test_" prefix, making the tests' names independent from the tool used. Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Acked-by:
David Gow <davidgow@google.com> Acked-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220911191756.203118-2-mairacanal@riseup.net
-
Maíra Canal authored
The igt_check_drm_framebuffer_create is based on a loop that executes tests for all createbuffer_tests test cases. This could be better represented by parameterized tests, provided by KUnit. So, convert the igt_check_drm_framebuffer_create into parameterized tests. Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
-
Maxime Ripard authored
Merge tag 'backlight-detect-refactor-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into drm-misc-next Immutable backlight-detect-refactor branch between acpi, drm-* and pdx86 Tag (immutable branch) with v6.0-rc1 + the (acpi/x86) backlight detect refactor work. For merging into the acpi, drm-* and pdx86 subsystems. Signed-off-by:
-
Maxime Ripard authored
We need 6.0-rc1 to merge the backlight rework PR. Signed-off-by:
-
- 13 Sep, 2022 15 commits
-
-
Gaosheng Cui authored
phm_is_hw_access_blocked() and phm_block_hw_access() has been removed since commit 698f88e6 ("drm/amd/powerplay: delete dead code in powerplay"), so remove them. Acked-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220913024847.552254-6-cuigaosheng1@huawei.com
-
Gaosheng Cui authored
psb_intel_sdvo_supports_hotplug(), psb_intel_sdvo_set_hotplug() and psb_intel_sdvo_find() have been removed since commit 871c6015 ("drm/gma500: Remove dead code"), so remove them. Acked-by:
-
Gaosheng Cui authored
radeon_combios_get_ext_tmds_info() has been removed since commit fcec570b ("drm/radeon/kms: add support for external tmds on legacy boards"). radeon_mst has been removed since commit 01ad1d9c ("drm/radeon: Drop legacy MST support"). r600_hdmi_acr() has been removed since commit 64424d6e ("radeon/audio: consolidate update_acr() functions (v2)"). So remove the declarations for them from header file. Acked-by:
-
Gaosheng Cui authored
r600_cs_legacy_get_tiling_conf() has been removed since commit 8333f607 ("drm/radeon: remove UMS support"), so remove it. Acked-by:
-
Gaosheng Cui authored
vmw_bo_is_vmw_bo() has been removed since commit 298799a2 ("drm/vmwgfx: Fix gem refcounting and memory evictions"), so remove it. Acked-by:
-
Maxime Ripard authored
There's some interactions between the SCDC setup and the disconnection / reconnection of displays. Let's document it and a solution. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Maxime Ripard authored
During a hotplug cycle (such as a TV going out of suspend, or when the cable is disconnected and reconnected), the expectation is that the same state used before the disconnection is reused until the next commit. However, the HDMI scrambling requires that some flags are set in the monitor, and those flags are very likely to be reset when the cable has been disconnected. This will thus result in a blank display, even if the display pipeline configuration hasn't been modified or is in the exact same state. The solution we've had so far is to enable the scrambling-related bits again on reconnection, but the HDMI 2.0 specification (Section 6.1.3.1 - Scrambling Control) requires that the scrambling enable bit is set before sending any scrambled video signal. Using that solution thus breaks that expectation. The solution used by i915 is to do a full modeset on the connector so that we disable the video signal, enable the scrambling bit, and enable the video signal again. As such, we took that code and plugged it into vc4. It probably could have been turned into an helper, but it proved to be difficult for several reasons: * i915 has fairly different structures than simpler KMS drivers such as vc4, so doing some code that works with both proved to be difficult; * Other simpler drivers could reuse some of it (tegra, dw-hdmi), but it would still require to move some parameters currently stored in private structure that are needed to compute whether the scrambling is needed or not, and then inform the driver that it needs to be enabled. Some of those parameters are already in core structures (drm_display_mode, drm_display_info, bpc), but the output format isnt't. Adding it is fairly challenging since unlike the TMDS char rate or mode, there's no consensus on what format to pick in drivers, so it's not possible to write some generic code that can depend on it. For these reasons, we chose to duplicate the code for now, until someone else really needs it as well, in which case we will be able to convert it into a generic helper. Reviewed-by: -
Maxime Ripard authored
We'll need it earlier in the driver, so let's move it next to the other scrambling-related helpers. Reviewed-by:
-
Maxime Ripard authored
We'll need the locking context in future patch, so let's convert .detect to .detect_ctx. Reviewed-by:
-
Maxime Ripard authored
Our detect callback has a bunch of operations to perform depending on the current and last status of the connector, such a setting the CEC physical address or enabling the scrambling again. This is currently dealt with a bunch of if / else statetements that make it fairly difficult to read and extend. Let's move all that logic to a function of its own. Reviewed-by:
-
Maxime Ripard authored
We recently introduced a new mutex to protect concurrent execution of ALSA and KMS hooks, and the concurrent access to some of vc4_hdmi fields. However, using it in the detect hook was creating a reentrency issue with CEC code. Indeed, calling cec_s_phys_addr_from_edid from detect might call the CEC adap_enable hook with the lock held, eventually resulting in a deadlock. Since we didn't really need to protect anything at the moment in the CEC code, the decision was made to ignore the mutex in those CEC hooks, working around the issue. However, we can have the same thing happening if we end up triggering a mode set from the detect callback, for example using drm_atomic_helper_connector_hdmi_reset_link(). Since we don't really need to protect anything in detect either, let's just drop the lock in detect, and add it again in CEC. Reviewed-by:
-
Maxime Ripard authored
Even though vc4_hdmi_supports_scrambling takes a mode as an argument, it never uses it. Let's remove it. Reviewed-by:
-
Maxime Ripard authored
We don't modify the drm_display_mode pointer we have in the driver in most places, so let's make them const. Reviewed-by:
-
Jouni Högander authored
We need to set also src_x, src_y, src_w and src_h for the mock plane. After fix for drm_atomic_helper_damage_iter_init we are using these when iterating damage_clips. Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Tested-by:
-
Jouni Högander authored
drm_plane_state->src might be modified by the driver. This is done e.g. in i915 driver when there is bigger framebuffer than the plane and there is some offset within framebuffer. I915 driver calculates separate offset and adjusts src rect coords to be relative to this offset. Damage clips are still relative to original src coords provided by user-space. This patch ensures original coordinates provided by user-space are used when initiliazing damage iterator. Signed-off-by:
-
- 12 Sep, 2022 2 commits
-
-
Robert Foss authored
As reported by Laurent in response to this commit[1], this functionality should not be implemented using the devicetree, because of this let's revert this series for now. This reverts commit c312b0df. [1] https://lore.kernel.org/all/20220902153906.31000-2-macroalpha82@gmail.com/Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220912113856.817188-3-robert.foss@linaro.org
-
Robert Foss authored
As reported by Laurent in response to this commit[1], this functionality should not be implemented using the devicetree, because of this let's revert this series for now. This reverts commit a4be7143. [1] https://lore.kernel.org/all/20220902153906.31000-2-macroalpha82@gmail.com/Signed-off-by:
-
