- 09 Apr, 2019 12 commits
-
-
Neil Armstrong authored
While switching to the Common Clock Framework is still Work In Progress, this patch adds the corresponding G12A HDMI PLL setup to be on-par with the other SoCs support. The G12A has only a single tweak about the high frequency setup, where the HDMI PLL needs a specific setup to handle correctly the 5.94GHz DCO frequency. Apart that, it handls ecorrectly all the other HDMI frequencies and can achieve even better DMT clock frequency precision with the larger fractional dividier width. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
-
Neil Armstrong authored
The Meson G12A SoCs uses the exact same CVBS encoder except a simple CVBS DAC register offset and settings delta. Signed-off-by:
-
Neil Armstrong authored
This patch adds support for the new OSD+VD Plane blending module in the CRTC code by adding the G12A code to manage the blending module and setting the right OSD1 & VD1 plane registers. Signed-off-by:
-
Neil Armstrong authored
Amlogic G12A SoC supports the same set of Video Planes, but now are handled by the new OSD plane blender module. This patch uses the same VD1 plane for G12A, using the exact same scaler and VD1 setup registers, except using the new blender register to disable the plane. Signed-off-by:
-
Neil Armstrong authored
Amlogic G12A SoC supports now up to 3 OSD planes (1 more than the previous SoCs) and a brand new OSD plane blender module. This patch uses the same OSD1 plane for G12A, using the exact same scaler and OSD1 setup registers, except using the new blender register to disable the plane. Signed-off-by:
-
Neil Armstrong authored
Amlogic G12A SoC needs a different VIU setup code, handle it. Signed-off-by:
-
Neil Armstrong authored
Amlogic G12A needs a different VPP setup code, handle it here. Signed-off-by:
-
Neil Armstrong authored
This patch adds the new VPU registers added since the Amlogic GXM SoCs. Signed-off-by:
-
Neil Armstrong authored
On Amlogic G12A SoC, the 2,97GHz PLL frequency is not stable enough to provide a correct 297MHz pixel clock, so switch the PLL base frequency with a /2 OD when the 297MHz pixel clock is requested. This solves the issue on G12A and also works fine on GXBB, GXL & GXM. Signed-off-by:
-
Neil Armstrong authored
The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with support for HDMI 2.1 and a different DW-HDMI register access. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190313141030.5958-3-narmstrong@baylibre.com
-
Neil Armstrong authored
The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with : - an enhanced plane blender, with up to 3 OSD planes - support for AFBC 1.2 decoder (for Bifrost GPU) - support display mode up to 4k60@75Hz Signed-off-by:
-
Neil Armstrong authored
Add the bindings for the Bifrost family of ARM Mali GPUs. The Bifrost GPU architecture is similar to the Midgard family, but with a different Shader Core & Execution Engine structures. Bindings are based on the Midgard family bindings, but the inner architectural changes makes it a separate family needing separate bindings. The Bifrost GPUs are present in a number of recent SoCs, like the Amlogic G12A Family, and many other vendors. The Amlogic vendor specific compatible is added to handle the specific IP integration differences and dependencies. Signed-off-by:
-
- 08 Apr, 2019 6 commits
-
-
Randy Dunlap authored
Note that the lima mailing list is moderated. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Qiang Yu <yuq825@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: lima@lists.freedesktop.org Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/9138d8e8-5390-0650-9bc3-050b869e978c@infradead.orgReviewed-by:
-
Gerd Hoffmann authored
Time to kill some bad sample code people are copying from ;) This is a complete rewrite of the cirrus driver. The cirrus_mode_set() function is pretty much the only function which is carried over largely unmodified. Everything else is upside down. It is a single monster patch. But given that it does some pretty fundamental changes to the drivers workflow and also reduces the code size by roughly 70% I think it'll still be alot easier to review than a longish baby-step patch series. Changes summary: - Given the small amout of video memory (4 MB) the cirrus device has the rewritten driver doesn't try to manage buffers there. Instead it will blit (memcpy) the active framebuffer to video memory. - All gem objects are stored in main memory and are manged using the new shmem helpers. ttm is out. - It supports RG16, RG24 and XR24 formats. XR24 gets converted to RG24 or RG16 at blit time if needed, to avoid the pitch becoming larger than what the cirrus hardware can handle. - The simple display pipeline is used. - The generic fbdev emulation is used. - It's a atomic driver now. - It runs wayland. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-6-kraxel@redhat.com
-
Gerd Hoffmann authored
Simliar to drm_fb_xrgb8888_to_rgb565_dstclip() but converts to rgb888 instead of rgb565. Signed-off-by:
-
Gerd Hoffmann authored
It is a drm_fb_xrgb8888_to_rgb565() variant which checks the clip rectangle for the destination too. Common code between drm_fb_xrgb8888_to_rgb565() and drm_fb_xrgb8888_to_rgb565_dstclip() was factored out into the drm_fb_xrgb8888_to_rgb565_lines() helper function. Signed-off-by:
-
Gerd Hoffmann authored
It is a drm_fb_memcpy() variant which checks the clip rectangle for the destination too. Common code between drm_fb_memcpy() and drm_fb_memcpy_dstclip() was factored out into the drm_fb_memcpy_lines() helper function. Signed-off-by:
-
Gerd Hoffmann authored
Also rename them from tinydrm_* to drm_fb_* Pure code motion, no functional change. Signed-off-by:
-
- 05 Apr, 2019 1 commit
-
-
Sean Paul authored
The file was removed in the below patch and is causing this error: WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -function Canvas ../drivers/gpu/drm/meson/meson_canvas.c' failed with return code Fixes: 2bf6b5b0 ("drm/meson: exclusively use the canvas provider module") Cc: Maxime Jourdan <mjourdan@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Acked-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190403205652.183496-1-sean@poorly.run
-
- 04 Apr, 2019 6 commits
-
-
Wen Yang authored
The call to of_find_matching_node_and_match returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD) Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS) Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS) Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS) Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cn
-
kbuild test robot authored
Fixes: c9be804c ("drm/vc4: Use common helpers for debugfs setup by the driver components.") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Joe Perches authored
These were missing '\n' terminations, add them. Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/da6f2344396555034cf2476c8338b0ce1c56e0a7.camel@perches.com
-
Joel Stanley authored
This hardware is found inside ASPEED Baseboard Management Controller (BMC) system on chips. It is called the 'SOC Display Controller' or 'GFX'. Signed-off-by:
Joel Stanley <joel@jms.id.au> Acked-by:
Andrew Jeffery <andrew@aj.id.au> Link: https://patchwork.freedesktop.org/patch/msgid/20190403001909.31637-4-joel@jms.id.au
-
Joel Stanley authored
This driver is for the ASPEED BMC SoC's GFX display hardware. This driver runs on the ARM based BMC systems, unlike the ast driver which runs on a host CPU and is is for a PCI graphics device. Signed-off-by:
-
Joel Stanley authored
This describes the ASPEED BMC SoC's display controller. Signed-off-by:
-
- 03 Apr, 2019 15 commits
-
-
Eric Anholt authored
One might want to use the VC4 display stack without using Mesa. Similar to the debugfs fixes for not having all of the possible display bits enabled, make sure you can't oops in vc4 if v3d isn't enabled. v2: Fix matching against other v3d variants (review by Paul), don't forget to set irq_enabled so that the vblank uapi works v3: Use -ENODEV instead of -EINVAL on Paul's suggestion. Signed-off-by:Paul Kocialkowski <paul.kocialkowski@bootlin.com>
-
Eric Anholt authored
The global list of all debugfs entries for the driver was painful: the list couldn't see into the components' structs, so each component had its own debugs show function to find the component, then find the regset and dump it. The components also had to be careful to check that they were actually registered in vc4 before dereferencing themselves, in case they weren't probed on a particular platform. They routinely failed at that. Instead, we can have the components add their debugfs callbacks to a little list in vc4 to be registered at drm_dev_register() time, which gets vc4_debugfs.c out of the business of knowing the whole list of components. Thanks to this change, dsi0 (if it existed) would register its node. v2: Rebase on hvs_underrun addition. v3: whitespace fixup Signed-off-by:
-
Yannick Fertré authored
The panel does not support clock frequency over 30.74 MHz. The clock rate has been reduced to 29.70 MHz & new timings have been computed to get a framerate of 50 fps. Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Reviewed-by:
Philippe Cornu <philippe.cornu@st.com> Tested-by:
-
Yannick Fertré authored
Do not print an error message if the regulator framework returns EPROBE_DEFER. Signed-off-by:
-
Yannick Fertré authored
Do not print an error message if the regulator framework returns EPROBE_DEFER. Signed-off-by:
-
Yannick Fertré authored
At the end of initialization, a delay is required by the panel. Without this delay, the panel could received a frame early & generate a crash of panel (black screen). Signed-off-by:
-
Guido Günther authored
Support Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel. It is a MIPI DSI video mode panel. The panel seems to use a Sitronix ST7703 look alike (most of the commands look similar to the ST7703's data sheet but use a different number of parameters). The initial version of the DSI init sequence (including sleeps) were provided by the vendor. Sleeps were reduced considerably though to speed up initialization. Signed-off-by:
-
Guido Günther authored
The Rocktec jh057n00900 is a 5.5" MIPI DSI video mode panel with a 720x1440 resolution and a built in backlight. Signed-off-by:
-
Guido Günther authored
Add ROCKTECH DISPLAYS LIMITED (https://rocktech.com.hk) LCD panel supplier. Signed-off-by:
-
Guido Günther authored
Some examples were missing the unit names triggering Warning (unit_address_vs_reg): .../panel: node has a reg or ranges property, but no unit name warnings when used verbatim in DTs and running dtc with W=1. Signed-off-by:
-
Jagan Teki authored
Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel. Add panel driver for it. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
Bhushan Shah <bshah@kde.org> Tested-by:
Merlijn Wajer <merlijn@wizzup.org> Signed-off-by:
-
Jagan Teki authored
Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel. Add dt-bingings for it. Signed-off-by:
-
Daniel Vetter authored
Interpreting it as a 0.16 fixed point means we can't accurately represent 1.0. Which is one of the values we really should be able to represent. Since most (all?) luts have lower precision this will only affect rounding of 0xffff. Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: "Kumar, Kiran S" <kiran.s.kumar@intel.com> Cc: Kausal Malladi <kausalmalladi@gmail.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rob Bradford <robert.bradford@intel.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Stefan Schake <stschake@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: James (Qian) Wang <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Acked-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190329092027.3430-1-daniel.vetter@ffwll.ch
-
Noralf Trønnes authored
Hotplug can happen while drm_fbdev_generic_setup() is running so move drm_client_add() call after setup is done to avoid drm_fbdev_client_hotplug() running in two threads at the same time. Fixes: 9060d7f4 ("drm/fb-helper: Finish the generic fbdev emulation") Cc: stable@vger.kernel.org Reported-by:
-
Noralf Trønnes authored
drm_dev_register() initializes internal clients like bootsplash as the last thing it does, so all setup needs to be done at this point. Fix by calling vc4_kms_load() before registering. Also check the error code returned from that function. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
-
