- 18 Aug, 2020 10 commits
-
-
Sergey Senozhatsky authored
We have a number of "uart.port->desc.lock vs desc.lock->uart.port" lockdep reports coming from 8250 driver; this causes a bit of trouble to people, so let's fix it. The problem is reverse lock order in two different call paths: chain #1: serial8250_do_startup() spin_lock_irqsave(&port->lock); disable_irq_nosync(port->irq); raw_spin_lock_irqsave(&desc->lock) chain #2: __report_bad_irq() raw_spin_lock_irqsave(&desc->lock) for_each_action_of_desc() printk() spin_lock_irqsave(&port->lock); Fix this by changing the order of locks in serial8250_do_startup(): do disable_irq_nosync() first, which grabs desc->lock, and grab uart->port after that, so that chain #1 and chain #2 have same lock order. Full lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.4.39 #55 Not tainted ====================================================== swapper/0/0 is trying to acquire lock: ffffffffab65b6c0 (console_owner){-...}, at: console_lock_spinning_enable+0x31/0x57 but task is already holding lock: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&irq_desc_lock_class){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d __irq_get_desc_lock+0x65/0x89 __disable_irq_nosync+0x3b/0x93 serial8250_do_startup+0x451/0x75c uart_startup+0x1b4/0x2ff uart_port_activate+0x73/0xa0 tty_port_open+0xae/0x10a uart_open+0x1b/0x26 tty_open+0x24d/0x3a0 chrdev_open+0xd5/0x1cc do_dentry_open+0x299/0x3c8 path_openat+0x434/0x1100 do_filp_open+0x9b/0x10a do_sys_open+0x15f/0x3d7 kernel_init_freeable+0x157/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50 -> #1 (&port_lock_key){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d serial8250_console_write+0xa7/0x2a0 console_unlock+0x3b7/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 register_console+0x336/0x3a4 uart_add_one_port+0x51b/0x5be serial8250_register_8250_port+0x454/0x55e dw8250_probe+0x4dc/0x5b9 platform_drv_probe+0x67/0x8b really_probe+0x14a/0x422 driver_probe_device+0x66/0x130 device_driver_attach+0x42/0x5b __driver_attach+0xca/0x139 bus_for_each_dev+0x97/0xc9 bus_add_driver+0x12b/0x228 driver_register+0x64/0xed do_one_initcall+0x20c/0x4a6 do_initcall_level+0xb5/0xc5 do_basic_setup+0x4c/0x58 kernel_init_freeable+0x13f/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50 -> #0 (console_owner){-...}: __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 console_lock_spinning_enable+0x51/0x57 console_unlock+0x25d/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 ret_from_intr+0x0/0x1d cpuidle_enter_state+0x12f/0x1fd cpuidle_enter+0x2e/0x3d do_idle+0x1ce/0x2ce cpu_startup_entry+0x1d/0x1f start_kernel+0x406/0x46a secondary_startup_64+0xa4/0xb0 other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &irq_desc_lock_class Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&irq_desc_lock_class); lock(&port_lock_key); lock(&irq_desc_lock_class); lock(console_owner); *** DEADLOCK *** 2 locks held by swapper/0/0: #0: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba #1: ffffffffab65b5c0 (console_lock){+.+.}, at: console_trylock_spinning+0x20/0x181 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.39 #55 Hardware name: XXXXXX Call Trace: <IRQ> dump_stack+0xbf/0x133 ? print_circular_bug+0xd6/0xe9 check_noncircular+0x1b9/0x1c3 __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 ? console_lock_spinning_enable+0x31/0x57 console_lock_spinning_enable+0x51/0x57 ? console_lock_spinning_enable+0x31/0x57 console_unlock+0x25d/0x528 ? console_trylock+0x18/0x4e vprintk_emit+0x111/0x17f ? lock_acquire+0x203/0x258 printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 common_interrupt+0xf/0xf </IRQ> Signed-off-by:Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Fixes: 768aec0b ("serial: 8250: fix shared interrupts issues with SMP and RT kernels") Reported-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Raul Rangel <rrangel@google.com> BugLink: https://bugs.chromium.org/p/chromium/issues/detail?id=1114800 Link: https://lore.kernel.org/lkml/CAHQZ30BnfX+gxjPm1DUd5psOTqbyDh4EJE=2=VAMW_VDafctkA@mail.gmail.com/T/#uReviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Holger Assmann authored
stm32_init_port() of the stm32-usart may trigger a warning in platform_get_irq() when the device tree specifies no wakeup interrupt. The wakeup interrupt is usually a board-specific GPIO and the driver functions correctly in its absence. The mainline stm32mp151.dtsi does not specify it, so all mainline device trees trigger an unnecessary kernel warning. Use of platform_get_irq_optional() avoids this. Fixes: 2c58e560 ("serial: stm32: fix the get_irq error case") Signed-off-by:
Holger Assmann <h.assmann@pengutronix.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813152757.32751-1-h.assmann@pengutronix.deSigned-off-by:
-
Lukas Wunner authored
If probing of a pl011 gets deferred until after free_initmem(), an oops ensues because pl011_console_match() is called which has been freed. Fix by removing the __init attribute from the function and those it calls. Commit 10879ae5 ("serial: pl011: add console matching function") introduced pl011_console_match() not just for early consoles but regular preferred consoles, such as those added by acpi_parse_spcr(). Regular consoles may be registered after free_initmem() for various reasons, one being deferred probing, another being dynamic enablement of serial ports using a DeviceTree overlay. Thus, pl011_console_match() must not be declared __init and the functions it calls mustn't either. Stack trace for posterity: Unable to handle kernel paging request at virtual address 80c38b58 Internal error: Oops: 8000000d [#1] PREEMPT SMP ARM PC is at pl011_console_match+0x0/0xfc LR is at register_console+0x150/0x468 [<80187004>] (register_console) [<805a8184>] (uart_add_one_port) [<805b2b68>] (pl011_register_port) [<805b3ce4>] (pl011_probe) [<80569214>] (amba_probe) [<805ca088>] (really_probe) [<805ca2ec>] (driver_probe_device) [<805ca5b0>] (__device_attach_driver) [<805c8060>] (bus_for_each_drv) [<805c9dfc>] (__device_attach) [<805ca630>] (device_initial_probe) [<805c90a8>] (bus_probe_device) [<805c95a8>] (deferred_probe_work_func) Fixes: 10879ae5 ("serial: pl011: add console matching function") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.10+ Cc: Aleksey Makarov <amakarov@marvell.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Christopher Covington <cov@codeaurora.org> Link: https://lore.kernel.org/r/f827ff09da55b8c57d316a1b008a137677b58921.1597315557.git.lukas@wunner.deSigned-off-by:
-
Lukas Wunner authored
pl011_probe() calls pl011_setup_port() to reserve an amba_ports[] entry, then calls pl011_register_port() to register the uart driver with the tty layer. If registration of the uart driver fails, the amba_ports[] entry is not released. If this happens 14 times (value of UART_NR macro), then all amba_ports[] entries will have been leaked and driver probing is no longer possible. (To be fair, that can only happen if the DeviceTree doesn't contain alias IDs since they cause the same entry to be used for a given port.) Fix it. Fixes: ef2889f7 ("serial: pl011: Move uart_register_driver call to device") Signed-off-by:
-
Valmer Huhn authored
The following in 8250_exar.c line 589 is used to determine the number of ports for each Exar board: nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f; If the number of ports a card has is not explicitly specified, it defaults to the rightmost 4 bits of the PCI device ID. This is prone to error since not all PCI device IDs contain a number which corresponds to the number of ports that card provides. This particular case involves COMMTECH_4222PCIE, COMMTECH_4224PCIE and COMMTECH_4228PCIE cards with device IDs 0x0022, 0x0020 and 0x0021. Currently the multiport cards receive 2, 0 and 1 port instead of 2, 4 and 8 ports respectively. To fix this, each Commtech Fastcom PCIe card is given a struct where the number of ports is explicitly specified. This ensures 'board->num_ports' is used instead of the default 'pcidev->device & 0x0f'. Fixes: d0aeaa83 ("serial: exar: split out the exar code from 8250_pci") Signed-off-by:
Valmer Huhn <valmer.huhn@concurrent-rt.com> Tested-by:
-
John Stultz authored
When booting with heavily modularized config, the serial console may not be able to load until after init when modules that satisfy needed dependencies have time to load. Unfortunately, as qcom_geni_console_setup is marked as __init, the function may have been freed before we get to run it, causing boot time crashes such as: [ 6.469057] Unable to handle kernel paging request at virtual address ffffffe645d4e6cc [ 6.481623] Mem abort info: [ 6.484466] ESR = 0x86000007 [ 6.487557] EC = 0x21: IABT (current EL), IL = 32 bits [ 6.492929] SET = 0, FnV = 0g [ 6.496016] EA = 0, S1PTW = 0 [ 6.499202] swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008151e000 [ 6.501286] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2 [ 6.505977] [ffffffe645d4e6cc] pgd=000000017df9f003, p4d=000000017df9f003, pud=000000017df9f003, pmd=000000017df9c003, pte=0000000000000000 [ 6.505990] Internal error: Oops: 86000007 [#1] PREEMPT SMP [ 6.505995] Modules linked in: zl10353 zl10039 zl10036 zd1301_demod xc5000 xc4000 ves1x93 ves1820 tuner_xc2028 tuner_simple tuner_types tua9001 tua6100 1 [ 6.506152] isl6405 [ 6.518104] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0 [ 6.530549] horus3a helene fc2580 fc0013 fc0012 fc0011 ec100 e4000 dvb_pll ds3000 drxk drxd drx39xyj dib9000 dib8000 dib7000p dib7000m dib3000mc dibx003 [ 6.624271] CPU: 7 PID: 148 Comm: kworker/7:2 Tainted: G W 5.8.0-mainline-12021-g6defd37ba1cd #3455 [ 6.624273] Hardware name: Thundercomm Dragonboard 845c (DT) [ 6.624290] Workqueue: events deferred_probe_work_func [ 6.624296] pstate: 40c00005 (nZcv daif +PAN +UAO BTYPE=--) [ 6.624307] pc : qcom_geni_console_setup+0x0/0x110 [ 6.624316] lr : try_enable_new_console+0xa0/0x140 [ 6.624318] sp : ffffffc010843a30 [ 6.624320] x29: ffffffc010843a30 x28: ffffffe645c3e7d0 [ 6.624325] x27: ffffff80f8022180 x26: ffffffc010843b28 [ 6.637937] x25: 0000000000000000 x24: ffffffe6462a2000 [ 6.637941] x23: ffffffe646398000 x22: 0000000000000000 [ 6.637945] x21: 0000000000000000 x20: ffffffe6462a5ce8 [ 6.637952] x19: ffffffe646398e38 x18: ffffffffffffffff [ 6.680296] x17: 0000000000000000 x16: ffffffe64492b900 [ 6.680300] x15: ffffffe6461e9d08 x14: 69202930203d2064 [ 6.680305] x13: 7561625f65736162 x12: 202c363331203d20 [ 6.696434] x11: 0000000000000030 x10: 0101010101010101 [ 6.696438] x9 : 4d4d20746120304d x8 : 7f7f7f7f7f7f7f7f [ 6.707249] x7 : feff4c524c787373 x6 : 0000000000008080 [ 6.707253] x5 : 0000000000000000 x4 : 8080000000000000 [ 6.707257] x3 : 0000000000000000 x2 : ffffffe645d4e6cc [ 6.744223] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34) [ 6.744966] x1 : fffffffefe74e174 x0 : ffffffe6462a5ce8 [ 6.753580] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34) [ 6.761634] Call trace: [ 6.761639] qcom_geni_console_setup+0x0/0x110 [ 6.761645] register_console+0x29c/0x2f8 [ 6.767981] Bluetooth: hci0: Frame reassembly failed (-84) [ 6.775252] uart_add_one_port+0x438/0x500 [ 6.775258] qcom_geni_serial_probe+0x2c4/0x4a8 [ 6.775266] platform_drv_probe+0x58/0xa8 [ 6.855359] really_probe+0xec/0x398 [ 6.855362] driver_probe_device+0x5c/0xb8 [ 6.855367] __device_attach_driver+0x98/0xb8 [ 7.184945] bus_for_each_drv+0x74/0xd8 [ 7.188825] __device_attach+0xec/0x148 [ 7.192705] device_initial_probe+0x24/0x30 [ 7.196937] bus_probe_device+0x9c/0xa8 [ 7.200816] deferred_probe_work_func+0x7c/0xb8 [ 7.205398] process_one_work+0x20c/0x4b0 [ 7.209456] worker_thread+0x48/0x460 [ 7.213157] kthread+0x14c/0x158 [ 7.216432] ret_from_fork+0x10/0x18 [ 7.220049] Code: bad PC value [ 7.223139] ---[ end trace 73f3b21e251d5a70 ]--- Thus this patch removes the __init avoiding crash in such configs. Cc: Andy Gross <agross@kernel.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-serial@vger.kernel.org Suggested-by:
Saravana Kannan <saravanak@google.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200811025044.70626-1-john.stultz@linaro.orgSigned-off-by:
-
Douglas Anderson authored
The commit e42d6c3e ("serial: qcom_geni_serial: Make kgdb work even if UART isn't console") worked pretty well and I've been doing a lot of debugging with it. However, recently I typed "dmesg" in kdb and then held the space key down to scroll through the pagination. My device hung. This was repeatable and I found that it was introduced with the aforementioned commit. It turns out that there are some strange boundary cases in geni where in some weird situations it will signal RX_LAST but then will put 0 in RX_LAST_BYTE. This means that the entire last FIFO entry is valid. This weird corner case is handled in qcom_geni_serial_handle_rx() where you can see that we only honor RX_LAST_BYTE if RX_LAST is set _and_ RX_LAST_BYTE is non-zero. If either of these is not true we use BYTES_PER_FIFO_WORD (4) for the size of the last FIFO word. Let's fix kgdb. While at it, also use the proper #define for 4. Fixes: e42d6c3e ("serial: qcom_geni_serial: Make kgdb work even if UART isn't console") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Akash Asthana <akashast@codeaurora.org> Link: https://lore.kernel.org/r/20200806221904.1.I4455ff86f0ef5281c2a0cd0a4712db614548a5ca@changeidSigned-off-by:
-
George Kennedy authored
vc_resize() can return with an error after failure. Change VT_RESIZEX ioctl to save struct vc_data values that are modified and restore the original values in case of error. Signed-off-by:
George Kennedy <george.kennedy@oracle.com> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/1596213192-6635-2-git-send-email-george.kennedy@oracle.comSigned-off-by:
-
George Kennedy authored
Add a check to fbcon_resize() to ensure that a possible change to user font height or user font width will not allow a font data out-of-bounds access. NOTE: must use original charcount in calculation as font charcount can change and cannot be used to determine the font data allocated size. Signed-off-by:
-
Tetsuo Handa authored
syzbot is reporting UAF bug in set_origin() from vc_do_resize() [1], for vc_do_resize() calls kfree(vc->vc_screenbuf) before calling set_origin(). Unfortunately, in set_origin(), vc->vc_sw->con_set_origin() might access vc->vc_pos when scroll is involved in order to manipulate cursor, but vc->vc_pos refers already released vc->vc_screenbuf until vc->vc_pos gets updated based on the result of vc->vc_sw->con_set_origin(). Preserving old buffer and tolerating outdated vc members until set_origin() completes would be easier than preventing vc->vc_sw->con_set_origin() from accessing outdated vc members. [1] https://syzkaller.appspot.com/bug?id=6649da2081e2ebdc65c0642c214b27fe91099db3Reported-by:
syzbot <syzbot+9116ecc1978ca3a12f43@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1596034621-4714-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
-
- 16 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
- 15 Aug, 2020 24 commits
-
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: - some code cleanup - a couple of static analysis fixes - setattr: try to pick a fid associated with the file rather than the dentry, which might sometimes matter * tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux: 9p: Remove unneeded cast from memory allocation 9p: remove unused code in 9p net/9p: Fix sparse endian warning in trans_fd.c 9p: Fix memory leak in v9fs_mount 9p: retrieve fid from file when file instance exist.
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small cifs/smb3 fixes, one for stable fixing mkdir path with the 'idsfromsid' mount option" * tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix mkdir when idsfromsid configured on mount cifs: Convert to use the fallthrough macro cifs: Fix an error pointer dereference in cifs_mount()
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Stable fixes: - pNFS: Don't return layout segments that are being used for I/O - pNFS: Don't move layout segments off the active list when being used for I/O Features: - NFS: Add support for user xattrs through the NFSv4.2 protocol - NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC - NFSv4.0 allow nconnect for v4.0 Bugfixes and cleanups: - nfs: ensure correct writeback errors are returned on close() - nfs: nfs_file_write() should check for writeback errors - nfs: Fix getxattr kernel panic and memory overflow - NFS: Fix the pNFS/flexfiles mirrored read failover code - SUNRPC: dont update timeout value on connection reset - freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS - sunrpc: destroy rpc_inode_cachep after unregister_filesystem" * tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits) NFS: Fix flexfiles read failover fs: nfs: delete repeated words in comments rpc_pipefs: convert comma to semicolon nfs: Fix getxattr kernel panic and memory overflow NFS: Don't return layout segments that are in use NFS: Don't move layouts to plh_return_segs list while in use NFS: Add layout segment info to pnfs read/write/commit tracepoints NFS: Add tracepoints for layouterror and layoutstats. NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close() SUNRPC dont update timeout value on connection reset nfs: nfs_file_write() should check for writeback errors nfs: ensure correct writeback errors are returned on close() NFSv4.2: xattr cache: get rid of cache discard work queue NFS: remove redundant initialization of variable result NFSv4.0 allow nconnect for v4.0 freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS sunrpc: destroy rpc_inode_cachep after unregister_filesystem NFSv4.2: add client side xattr caching. NFSv4.2: hook in the user extended attribute handlers NFSv4.2: add the extended attribute proc functions. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull edac fix from Tony Luck: "Fix for the ie31200 driver that missed the first pull" * tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ie31200: Fallback if host bridge device is already initialized
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: "Another round of 'allOf' removals and whitespace clean-ups of schemas" * tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Remove more cases of 'allOf' containing a '$ref' dt-bindings: Whitespace clean-ups in schema files
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more ACPI updates from Rafael Wysocki: "Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk driver and the Designware i2c driver (changes from Akshu Agrawal and Pu Wen)" * tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: clk: x86: Support RV architecture ACPI: APD: Add a fmw property is_raven clk: x86: Change name from ST to FCH ACPI: APD: Change name from ST to FCH i2c: designware: Add device HID for Hygon I2C controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull one more power management update from Rafael Wysocki: "Modify the intel_pstate driver to allow it to work in the passive mode with hardware-managed P-states (HWP) enabled" * tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Implement passive mode with HWP enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "Core Frameworks - Make better attempt at matching device with the correct OF node - Allow batch removal of hierarchical sub-devices New Drivers - Add STM32 Clocksource driver - Add support for Khadas System Control Microcontroller Driver Removal - Remove unused driver for TI's SMSC ECE1099 New Device Support - Add support for Intel Emmitsburg PCH to Intel LPSS PCI - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI - Add support for Dialog DA revision to Dialog DA9063 New Functionality - Add support for AXP803 to be probed by I2C Fix-ups - Numerous W=1 warning fixes - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller) - Enabled Regmap 'fast I/O' in stm32-lptimer - Change BUG_ON to WARN_ON in arizona-core - Remove superfluous code/initialisation (madera, max14577) - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private) - Switch to of_platform_populate() in sprd-sc27xx-spi - Expand out set/get brightness/pwm macros in lm3533-ctrlbank - Disable IRQs on suspend in motorola-cpcap - Clean-up error handling in intel_soc_pmic_mrfld - Ensure correct removal order of sub-devices in madera - Many s/HTTP/HTTPS/ link changes - Ensure name used with Regmap is unique in syscon Bug Fixes - Properly 'put' clock on unbind and error in arizona-core - Fix revision handling in da9063 - Fix 'assignment of read-only location' error in kempld-core - Avoid using the Regmap API when atomic in rn5t618 - Redefine volatile register description in rn5t618 - Use locking to protect event handler in dln2" * tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: syscon: Use a unique name with regmap_config mfd: Replace HTTP links with HTTPS ones mfd: dln2: Run event handler loop under spinlock mfd: madera: Improve handling of regulator unbinding mfd: mfd-core: Add mechanism for removal of a subset of children mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8() mfd: max14577: Remove redundant initialization of variable current_bits mfd: rn5t618: Fix caching of battery related registers mfd: max77693-private: Drop a duplicated word mfd: da9055: pdata.h: Drop a duplicated word mfd: rn5t618: Make restart handler atomic safe mfd: kempld-core: Fix 'assignment of read-only location' error mfd: axp20x: Allow the AXP803 to be probed by I2C mfd: da9063: Add support for latest DA silicon revision mfd: da9063: Fix revision handling to correctly select reg tables dt-bindings: mfd: st,stmfx: Remove I2C unit name dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller mfd: motorola-cpcap: Disable interrupt for suspend mfd: smsc-ece1099: Remove driver mfd: core: Add OF_MFD_CELL_REG() helper ...
-
Linus Torvalds authored
Merge more updates from Andrew Morton: "Subsystems affected by this patch series: mm/hotfixes, lz4, exec, mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits) virtio: pci: constify ioreadX() iomem argument (as in generic implementation) ntb: intel: constify ioreadX() iomem argument (as in generic implementation) rtl818x: constify ioreadX() iomem argument (as in generic implementation) iomap: constify ioreadX() iomem argument (as in generic implementation) sh: use generic strncpy() sh: clkfwk: remove r8/r16/r32 include/asm-generic/vmlinux.lds.h: align ro_after_init mm: annotate a data race in page_zonenum() mm/swap.c: annotate data races for lru_rotate_pvecs mm/rmap: annotate a data race at tlb_flush_batched mm/mempool: fix a data race in mempool_free() mm/list_lru: fix a data race in list_lru_count_one mm/memcontrol: fix a data race in scan count mm/page_counter: fix various data races at memsw mm/swapfile: fix and annotate various data races mm/filemap.c: fix a data race in filemap_fault() mm/swap_state: mark various intentional data races mm/page_io: mark various intentional data races mm/frontswap: mark various intentional data races mm/kmemleak: silence KCSAN splats in checksum ...
-
Krzysztof Kozlowski authored
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-5-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-4-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-3-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Patch series "iomap: Constify ioreadX() iomem argument", v3. The ioread8/16/32() and others have inconsistent interface among the architectures: some taking address as const, some not. It seems there is nothing really stopping all of them to take pointer to const. This patch (of 4): The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. [krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()] Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org [akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c] Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.comSuggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Allen Hubbe <allenbh@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.orgSigned-off-by:
-
Kuninori Morimoto authored
Current SH will get below warning at strncpy() In file included from ${LINUX}/arch/sh/include/asm/string.h:3, from ${LINUX}/include/linux/string.h:20, from ${LINUX}/include/linux/bitmap.h:9, from ${LINUX}/include/linux/nodemask.h:95, from ${LINUX}/include/linux/mmzone.h:17, from ${LINUX}/include/linux/gfp.h:6, from ${LINUX}/innclude/linux/slab.h:15, from ${LINUX}/linux/drivers/mmc/host/vub300.c:38: ${LINUX}/drivers/mmc/host/vub300.c: In function 'new_system_port_status': ${LINUX}/arch/sh/include/asm/string_32.h:51:42: warning: array subscript\ 80 is above array bounds of 'char[26]' [-Warray-bounds] : "0" (__dest), "1" (__src), "r" (__src+__n) ~~~~~^~~~ In general, strncpy() should behave like below. char dest[10]; char *src = "12345"; strncpy(dest, src, 10); // dest = {'1', '2', '3', '4', '5', '\0','\0','\0','\0','\0'} But, current SH strnpy() has 2 issues. 1st is it will access to out-of-memory (= src + 10). 2nd is it needs big fixup for it, and maintenance __asm__ code is difficult. To solve these issues, this patch simply uses generic strncpy() instead of architecture specific one. Signed-off-by:Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Kuninori Morimoto authored
SH will get below warning ${LINUX}/drivers/sh/clk/cpg.c: In function 'r8': ${LINUX}/drivers/sh/clk/cpg.c:41:17: warning: passing argument 1 of 'ioread8' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] return ioread8(addr); ^~~~ In file included from ${LINUX}/arch/sh/include/asm/io.h:21, from ${LINUX}/include/linux/io.h:13, from ${LINUX}/drivers/sh/clk/cpg.c:14: ${LINUX}/include/asm-generic/iomap.h:29:29: note: expected 'void *' but argument is of type 'const void *' extern unsigned int ioread8(void __iomem *); ^~~~~~~~~~~~~~ We don't need "const" for r8/r16/r32. And we don't need r8/r16/r32 themselvs. This patch cleanup these. Signed-off-by: -
Romain Naour authored
Since the patch [1], building the kernel using a toolchain built with binutils 2.33.1 prevents booting a sh4 system under Qemu. Apply the patch provided by Alan Modra [2] that fix alignment of rodata. [1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=ebd2263ba9a9124d93bbc0ece63d7e0fae89b40e [2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.htmlSigned-off-by:
Romain Naour <romain.naour@gmail.com> Signed-off-by:
-
Qian Cai authored
BUG: KCSAN: data-race in page_cpupid_xchg_last / put_page write (marked) to 0xfffffc0d48ec1a00 of 8 bytes by task 91442 on cpu 3: page_cpupid_xchg_last+0x51/0x80 page_cpupid_xchg_last at mm/mmzone.c:109 (discriminator 11) wp_page_reuse+0x3e/0xc0 wp_page_reuse at mm/memory.c:2453 do_wp_page+0x472/0x7b0 do_wp_page at mm/memory.c:2798 __handle_mm_fault+0xcb0/0xd00 handle_pte_fault at mm/memory.c:4049 (inlined by) __handle_mm_fault at mm/memory.c:4163 handle_mm_fault+0xfc/0x2f0 handle_mm_fault at mm/memory.c:4200 do_page_fault+0x263/0x6f9 do_user_addr_fault at arch/x86/mm/fault.c:1465 (inlined by) do_page_fault at arch/x86/mm/fault.c:1539 page_fault+0x34/0x40 read to 0xfffffc0d48ec1a00 of 8 bytes by task 94817 on cpu 69: put_page+0x15a/0x1f0 page_zonenum at include/linux/mm.h:923 (inlined by) is_zone_device_page at include/linux/mm.h:929 (inlined by) page_is_devmap_managed at include/linux/mm.h:948 (inlined by) put_page at include/linux/mm.h:1023 wp_page_copy+0x571/0x930 wp_page_copy at mm/memory.c:2615 do_wp_page+0x107/0x7b0 __handle_mm_fault+0xcb0/0xd00 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 Reported by Kernel Concurrency Sanitizer on: CPU: 69 PID: 94817 Comm: systemd-udevd Tainted: G W O L 5.5.0-next-20200204+ #6 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 A page never changes its zone number. The zone number happens to be stored in the same word as other bits which are modified, but the zone number bits will never be modified by any other write, so it can accept a reload of the zone bits after an intervening write and it don't need to use READ_ONCE(). Thus, annotate this data race using ASSERT_EXCLUSIVE_BITS() to also assert that there are no concurrent writes to it. Suggested-by:
Marco Elver <elver@google.com> Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
