- 03 May, 2023 11 commits
-
-
Suman Ghosh authored
During the initial design, the IPv4 ip_flag mask was set to 0xff. Which results to filter only fragmets with (fragment_offset == 0). As part of the fix, updated the mask to 0x20 to filter all the fragmented packets irrespective of the fragment_offset value. Fixes: c672e372 ("octeontx2-pf: Add support to filter packet based on IP fragment") Signed-off-by:
Suman Ghosh <sumang@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
Sai Krishna <saikrishnag@marvell.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Kelam authored
Upon physical link change, firmware reports to the kernel about the change along with the details like speed, lmac_type_id, etc. Kernel derives lmac_type based on lmac_type_id received from firmware. In a few scenarios, firmware returns an invalid lmac_type_id, which is resulting in below kernel panic. This patch adds the missing validation of the lmac_type_id field. Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 35.321595] Modules linked in: [ 35.328982] CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.4.210-g2e3169d8e1bc-dirty #17 [ 35.337014] Hardware name: Marvell CN103XX board (DT) [ 35.344297] Workqueue: events work_for_cpu_fn [ 35.352730] pstate: 40400089 (nZcv daIf +PAN -UAO) [ 35.360267] pc : strncpy+0x10/0x30 [ 35.366595] lr : cgx_link_change_handler+0x90/0x180 Fixes: 61071a87 ("octeontx2-af: Forward CGX link notifications to PFs") Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
-
Ratheesh Kannoth authored
CN10kb supports large number of dmac filter flows to be inserted. Increase the field size to accommodate the same Fixes: b747923a ("octeontx2-af: Exact match support") Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by:
-
Ratheesh Kannoth authored
In current driver, NPC cam and mem table sizes are read from wrong register offset. This patch fixes the register offset so that correct values are populated on read. Fixes: b747923a ("octeontx2-af: Exact match support") Signed-off-by:
-
Ratheesh Kannoth authored
In the current driver, NPC exact match feature was not getting enabled as configured bit was not read properly. for_each_set_bit_from() need end bit as one bit post position in the bit map to read NPC exact nibble enable bits properly. This patch fixes the same. Fixes: b747923a ("octeontx2-af: Exact match support") Signed-off-by:
-
Geetha sowjanya authored
APR table contains the lmtst base address of PF/VFs. These entries are updated by the PF/VF during the device probe. The lmtst address is fetched from HW using "TXN_REQ" and "ADDR_RSP_STS" registers. The lock tries to protect these registers from getting overwritten when multiple PFs invokes rvu_get_lmtaddr() simultaneously. For example, if PF1 submit the request and got permitted before it reads the response and PF2 got scheduled submit the request then the response of PF1 is overwritten by the PF2 response. Fixes: 893ae972 ("octeontx2-af: cn10k: Support configurable LMTST regions") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
Pablo Neir Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Hit ENOENT when trying to update an unexisting base chain. 2) Fix libmnl pkg-config usage in selftests, from Jeremy Sowden. 3) KASAN reports use-after-free when deleting a set element for an anonymous set that was already removed in the same transaction, reported by P. Sondej and P. Krysiuk. ==================== Signed-off-by: -
Pablo Neira Ayuso authored
Toggle deleted anonymous sets as inactive in the next generation, so users cannot perform any update on it. Clear the generation bitmask in case the transaction is aborted. The following KASAN splat shows a set element deletion for a bound anonymous set that has been already removed in the same transaction. [ 64.921510] ================================================================== [ 64.923123] BUG: KASAN: wild-memory-access in nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.924745] Write of size 8 at addr dead000000000122 by task test/890 [ 64.927903] CPU: 3 PID: 890 Comm: test Not tainted 6.3.0+ #253 [ 64.931120] Call Trace: [ 64.932699] <TASK> [ 64.934292] dump_stack_lvl+0x33/0x50 [ 64.935908] ? nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.937551] kasan_report+0xda/0x120 [ 64.939186] ? nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.940814] nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.942452] ? __kasan_slab_alloc+0x2d/0x60 [ 64.944070] ? nf_tables_setelem_notify+0x190/0x190 [nf_tables] [ 64.945710] ? kasan_set_track+0x21/0x30 [ 64.947323] nfnetlink_rcv_batch+0x709/0xd90 [nfnetlink] [ 64.948898] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink] Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org>
-
Jeremy Sowden authored
1. Don't hard-code pkg-config 2. Remove distro-specific default for CFLAGS 3. Use pkg-config for LDLIBS Fixes: a50a88f0 ("selftests: netfilter: fix a build error on openSUSE") Suggested-by:
Jan Engelhardt <jengelh@inai.de> Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
Pablo Neira Ayuso authored
If user does not specify hook number and priority, then assume this is a chain/flowtable update. Therefore, report ENOENT which provides a better hint than EINVAL. Set on extended netlink error report to refer to the chain name. Fixes: 5b6743fb ("netfilter: nf_tables: skip flowtable hooknum and priority on device updates") Fixes: 5efe72698a97 ("netfilter: nf_tables: support for adding new devices to an existing netdev chain") Signed-off-by:
-
Felix Fietkau authored
Through testing I found out that hardware vlan rx offload support seems to have some hardware issues. At least when using multiple MACs and when receiving tagged packets on the secondary MAC, the hardware can sometimes start to emit wrong tags on the first MAC as well. In order to avoid such issues, drop the feature configuration and use the offload feature only for DSA hardware untagging on MT7621/MT7622 devices where this feature works properly. Fixes: 08666cbb ("net: ethernet: mtk_eth_soc: add support for configuring vlan rx offload") Tested-by:
Frank Wunderlich <frank-w@public-files.de> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by:
Jakub Kicinski <kuba@kernel.org>
-
- 01 May, 2023 11 commits
-
-
David S. Miller authored
David Howells says: ==================== rxrpc: Timeout handling fixes Here are three patches to fix timeouts handling in AF_RXRPC: (1) The hard call timeout should be interpreted in seconds, not milliseconds. (2) Allow a waiting call to be aborted (thereby cancelling the call) in the case a signal interrupts sendmsg() and leaves it hanging until it is granted a channel on a connection. (3) Kernel-generated calls get the timer started on them even if they're still waiting to be attached to a connection. If the timer expires before the wait is complete and a conn is attached, an oops will occur. ==================== Signed-off-by: -
David Howells authored
afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may get stalled in the background waiting for a connection to become available); it then calls rxrpc_kernel_set_max_life() to set the timeouts - but that starts the call timer so the call timer might then expire before we get a connection assigned - leading to the following oops if the call stalled: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701 RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157 ... Call Trace: <TASK> rxrpc_send_ACK+0x50/0x13b rxrpc_input_call_event+0x16a/0x67d rxrpc_io_thread+0x1b6/0x45f ? _raw_spin_unlock_irqrestore+0x1f/0x35 ? rxrpc_input_packet+0x519/0x519 kthread+0xe7/0xef ? kthread_complete_and_exit+0x1b/0x1b ret_from_fork+0x22/0x30 Fix this by noting the timeouts in struct rxrpc_call when the call is created. The timer will be started when the first packet is transmitted. It shouldn't be possible to trigger this directly from userspace through AF_RXRPC as sendmsg() will return EBUSY if the call is in the waiting-for-conn state if it dropped out of the wait due to a signal. Fixes: 9d35d880 ("rxrpc: Move client call connection to the I/O thread") Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> cc: "David S. Miller" <davem@davemloft.net> cc: Eric Dumazet <edumazet@google.com> cc: Jakub Kicinski <kuba@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org cc: linux-kernel@vger.kernel.org Signed-off-by:
-
David Howells authored
When sendmsg() creates an rxrpc call, it queues it to wait for a connection and channel to be assigned and then waits before it can start shovelling data as the encrypted DATA packet content includes a summary of the connection parameters. However, sendmsg() may get interrupted before a connection gets assigned and further sendmsg() calls will fail with EBUSY until an assignment is made. Fix this so that the call can at least be aborted without failing on EBUSY. We have to be careful here as sendmsg() mustn't be allowed to start the call timer if the call doesn't yet have a connection assigned as an oops may follow shortly thereafter. Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Reported-by:
-
David Howells authored
The hard call timeout is specified in the RXRPC_SET_CALL_TIMEOUT cmsg in seconds, so fix the point at which sendmsg() applies it to the call to convert to jiffies from seconds, not milliseconds. Fixes: a158bdd3 ("rxrpc: Fix timeout of a call that hasn't yet been granted a channel") Signed-off-by:
-
Tom Rix authored
For s390, gcc with W=1 reports drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c:458:32: error: 'aq_pm_ops' defined but not used [-Werror=unused-const-variable=] 458 | static const struct dev_pm_ops aq_pm_ops = { | ^~~~~~~~~ The only use of aq_pm_ops is conditional on CONFIG_PM. The definition of aq_pm_ops and its functions should also be conditional on CONFIG_PM. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Andy Moreton authored
The sfc driver does not report QSFP module EEPROM contents correctly as only the first page is fetched from hardware. Commit 0e1a2a3e ("ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions") added ETH_MODULE_SFF_8436_MAX_LEN for the overall size of the EEPROM info, so use that to report the full EEPROM contents. Fixes: 9b17010d ("sfc: Add ethtool -m support for QSFP modules") Signed-off-by:
Andy Moreton <andy.moreton@amd.com> Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8152: fix 2.5G devices v3: For patch #2, modify the comment. v2: For patch #1, Remove inline for fc_pause_on_auto() and fc_pause_off_auto(), and update the commit message. For patch #2, define the magic value for OCP register 0xa424. v1: These patches are used to fix some issues of RTL8156. ==================== Signed-off-by: -
Hayes Wang authored
Move setting r8153b_rx_agg_chg_indicate() for 2.5G devices. The r8153b_rx_agg_chg_indicate() has to be called after enabling tx/rx. Otherwise, the coalescing settings are useless. Fixes: 195aae32 ("r8152: support new chips") Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Hayes Wang authored
Fix the poor throughput for 2.5G devices, when changing the speed from auto mode to force mode. This patch is used to notify the MAC when the mode is changed. Fixes: 195aae32 ("r8152: support new chips") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Hayes Wang authored
The feature of flow control becomes abnormal, if the device sends a pause frame and the tx/rx is disabled before sending a release frame. It causes the lost of packets. Set PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY to zeros before disabling the tx/rx. And, toggle FC_PATCH_TASK before enabling tx/rx to reset the flow control patch and timer. Then, the hardware could clear the state and the flow control becomes normal after enabling tx/rx. Besides, remove inline for fc_pause_on_auto() and fc_pause_off_auto(). Fixes: 195aae32 ("r8152: support new chips") Signed-off-by:
-
Victor Nogueira authored
There are cases where the device is adminstratively UP, but operationally down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps) who's cable was pulled out, here is its ip link output: 5: ens2f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff altname enp179s0f1np1 As you can see, it's administratively UP but operationally down. In this case, sending a packet to this port caused a nasty kernel hang (so nasty that we were unable to capture it). Aborting a transmit based on operational status (in addition to administrative status) fixes the issue. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Acked-by:Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Victor Nogueira <victor@mojatatu.com> v1->v2: Add fixes tag v2->v3: Remove blank line between tags + add change log, suggested by Leon Signed-off-by:
-
- 28 Apr, 2023 7 commits
-
-
Angelo Dureghello authored
Add rsvd2cpu capability for mv88e6321 model, to allow proper bpdu processing. Signed-off-by:
Angelo Dureghello <angelo.dureghello@timesys.com> Fixes: 51c901a7 ("net: dsa: mv88e6xxx: distinguish Global 2 Rsvd2CPU") Reviewed-by:
-
Antoine Tenart authored
The skb hash comes from sk->sk_txhash when using TCP, except for some IPv6 RST packets. This is because in tcp_v6_send_reset when not in TIME_WAIT the hash is taken from sk->sk_hash, while it should come from sk->sk_txhash as those two hashes are not computed the same way. Packetdrill script to test the above, 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > (flowlabel 0x1) S 0:0(0) <...> // Wrong ack seq, trigger a rst. +0 < S. 0:0(0) ack 0 win 4000 // Check the flowlabel matches prior one from SYN. +0 > (flowlabel 0x1) R 0:0(0) <...> Fixes: 9258b8b1 ("ipv6: tcp: send consistent autoflowlabel in RST packets") Signed-off-by:
Antoine Tenart <atenart@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Andrea Mayer authored
On some distributions, the rp_filter is automatically set (=1) by default on a netdev basis (also on VRFs). In an SRv6 End.DT46 behavior, decapsulated IPv4 packets are routed using the table associated with the VRF bound to that tunnel. During lookup operations, the rp_filter can lead to packet loss when activated on the VRF. Therefore, we chose to make this selftest more robust by explicitly disabling the rp_filter during tests (as it is automatically set by some Linux distributions). Fixes: 03a0b567 ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Tested-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Cong Wang authored
When a tunnel device is bound with the underlying device, its dev->needed_headroom needs to be updated properly. IPv4 tunnels already do the same in ip_tunnel_bind_dev(). Otherwise we may not have enough header room for skb, especially after commit b17f709a ("gue: TX support for using remote checksum offload option"). Fixes: 32b8a8e5 ("sit: add IPv4 over IPv4 support") Reported-by:
Palash Oswal <oswalpalash@gmail.com> Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/ Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Vlad Buslov authored
Error handler of tcf_block_bind() frees the whole bo->cb_list on error. However, by that time the flow_block_cb instances are already in the driver list because driver ndo_setup_tc() callback is called before that up the call chain in tcf_block_offload_cmd(). This leaves dangling pointers to freed objects in the list and causes use-after-free[0]. Fix it by also removing flow_block_cb instances from driver_list before deallocating them. [0]: [ 279.868433] ================================================================== [ 279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0 [ 279.871527] Read of size 8 at addr ffff888147e2bf20 by task tc/2963 [ 279.873151] CPU: 6 PID: 2963 Comm: tc Not tainted 6.3.0-rc6+ #4 [ 279.874273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 279.876295] Call Trace: [ 279.876882] <TASK> [ 279.877413] dump_stack_lvl+0x33/0x50 [ 279.878198] print_report+0xc2/0x610 [ 279.878987] ? flow_block_cb_setup_simple+0x631/0x7c0 [ 279.879994] kasan_report+0xae/0xe0 [ 279.880750] ? flow_block_cb_setup_simple+0x631/0x7c0 [ 279.881744] ? mlx5e_tc_reoffload_flows_work+0x240/0x240 [mlx5_core] [ 279.883047] flow_block_cb_setup_simple+0x631/0x7c0 [ 279.884027] tcf_block_offload_cmd.isra.0+0x189/0x2d0 [ 279.885037] ? tcf_block_setup+0x6b0/0x6b0 [ 279.885901] ? mutex_lock+0x7d/0xd0 [ 279.886669] ? __mutex_unlock_slowpath.constprop.0+0x2d0/0x2d0 [ 279.887844] ? ingress_init+0x1c0/0x1c0 [sch_ingress] [ 279.888846] tcf_block_get_ext+0x61c/0x1200 [ 279.889711] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.890682] ? clsact_init+0x2b0/0x2b0 [sch_ingress] [ 279.891701] qdisc_create+0x401/0xea0 [ 279.892485] ? qdisc_tree_reduce_backlog+0x470/0x470 [ 279.893473] tc_modify_qdisc+0x6f7/0x16d0 [ 279.894344] ? tc_get_qdisc+0xac0/0xac0 [ 279.895213] ? mutex_lock+0x7d/0xd0 [ 279.896005] ? __mutex_lock_slowpath+0x10/0x10 [ 279.896910] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.897770] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 279.898672] ? __sys_sendmsg+0xb5/0x140 [ 279.899494] ? do_syscall_64+0x3d/0x90 [ 279.900302] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.901337] ? kasan_save_stack+0x2e/0x40 [ 279.902177] ? kasan_save_stack+0x1e/0x40 [ 279.903058] ? kasan_set_track+0x21/0x30 [ 279.903913] ? kasan_save_free_info+0x2a/0x40 [ 279.904836] ? ____kasan_slab_free+0x11a/0x1b0 [ 279.905741] ? kmem_cache_free+0x179/0x400 [ 279.906599] netlink_rcv_skb+0x12c/0x360 [ 279.907450] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 279.908360] ? netlink_ack+0x1550/0x1550 [ 279.909192] ? rhashtable_walk_peek+0x170/0x170 [ 279.910135] ? kmem_cache_alloc_node+0x1af/0x390 [ 279.911086] ? _copy_from_iter+0x3d6/0xc70 [ 279.912031] netlink_unicast+0x553/0x790 [ 279.912864] ? netlink_attachskb+0x6a0/0x6a0 [ 279.913763] ? netlink_recvmsg+0x416/0xb50 [ 279.914627] netlink_sendmsg+0x7a1/0xcb0 [ 279.915473] ? netlink_unicast+0x790/0x790 [ 279.916334] ? iovec_from_user.part.0+0x4d/0x220 [ 279.917293] ? netlink_unicast+0x790/0x790 [ 279.918159] sock_sendmsg+0xc5/0x190 [ 279.918938] ____sys_sendmsg+0x535/0x6b0 [ 279.919813] ? import_iovec+0x7/0x10 [ 279.920601] ? kernel_sendmsg+0x30/0x30 [ 279.921423] ? __copy_msghdr+0x3c0/0x3c0 [ 279.922254] ? import_iovec+0x7/0x10 [ 279.923041] ___sys_sendmsg+0xeb/0x170 [ 279.923854] ? copy_msghdr_from_user+0x110/0x110 [ 279.924797] ? ___sys_recvmsg+0xd9/0x130 [ 279.925630] ? __perf_event_task_sched_in+0x183/0x470 [ 279.926656] ? ___sys_sendmsg+0x170/0x170 [ 279.927529] ? ctx_sched_in+0x530/0x530 [ 279.928369] ? update_curr+0x283/0x4f0 [ 279.929185] ? perf_event_update_userpage+0x570/0x570 [ 279.930201] ? __fget_light+0x57/0x520 [ 279.931023] ? __switch_to+0x53d/0xe70 [ 279.931846] ? sockfd_lookup_light+0x1a/0x140 [ 279.932761] __sys_sendmsg+0xb5/0x140 [ 279.933560] ? __sys_sendmsg_sock+0x20/0x20 [ 279.934436] ? fpregs_assert_state_consistent+0x1d/0xa0 [ 279.935490] do_syscall_64+0x3d/0x90 [ 279.936300] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.937311] RIP: 0033:0x7f21c814f887 [ 279.938085] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 279.941448] RSP: 002b:00007fff11efd478 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 279.942964] RAX: ffffffffffffffda RBX: 0000000064401979 RCX: 00007f21c814f887 [ 279.944337] RDX: 0000000000000000 RSI: 00007fff11efd4e0 RDI: 0000000000000003 [ 279.945660] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 279.947003] R10: 00007f21c8008708 R11: 0000000000000246 R12: 0000000000000001 [ 279.948345] R13: 0000000000409980 R14: 000000000047e538 R15: 0000000000485400 [ 279.949690] </TASK> [ 279.950706] Allocated by task 2960: [ 279.951471] kasan_save_stack+0x1e/0x40 [ 279.952338] kasan_set_track+0x21/0x30 [ 279.953165] __kasan_kmalloc+0x77/0x90 [ 279.954006] flow_block_cb_setup_simple+0x3dd/0x7c0 [ 279.955001] tcf_block_offload_cmd.isra.0+0x189/0x2d0 [ 279.956020] tcf_block_get_ext+0x61c/0x1200 [ 279.956881] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.957873] qdisc_create+0x401/0xea0 [ 279.958656] tc_modify_qdisc+0x6f7/0x16d0 [ 279.959506] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.960392] netlink_rcv_skb+0x12c/0x360 [ 279.961216] netlink_unicast+0x553/0x790 [ 279.962044] netlink_sendmsg+0x7a1/0xcb0 [ 279.962906] sock_sendmsg+0xc5/0x190 [ 279.963702] ____sys_sendmsg+0x535/0x6b0 [ 279.964534] ___sys_sendmsg+0xeb/0x170 [ 279.965343] __sys_sendmsg+0xb5/0x140 [ 279.966132] do_syscall_64+0x3d/0x90 [ 279.966908] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.968407] Freed by task 2960: [ 279.969114] kasan_save_stack+0x1e/0x40 [ 279.969929] kasan_set_track+0x21/0x30 [ 279.970729] kasan_save_free_info+0x2a/0x40 [ 279.971603] ____kasan_slab_free+0x11a/0x1b0 [ 279.972483] __kmem_cache_free+0x14d/0x280 [ 279.973337] tcf_block_setup+0x29d/0x6b0 [ 279.974173] tcf_block_offload_cmd.isra.0+0x226/0x2d0 [ 279.975186] tcf_block_get_ext+0x61c/0x1200 [ 279.976080] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.977065] qdisc_create+0x401/0xea0 [ 279.977857] tc_modify_qdisc+0x6f7/0x16d0 [ 279.978695] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.979562] netlink_rcv_skb+0x12c/0x360 [ 279.980388] netlink_unicast+0x553/0x790 [ 279.981214] netlink_sendmsg+0x7a1/0xcb0 [ 279.982043] sock_sendmsg+0xc5/0x190 [ 279.982827] ____sys_sendmsg+0x535/0x6b0 [ 279.983703] ___sys_sendmsg+0xeb/0x170 [ 279.984510] __sys_sendmsg+0xb5/0x140 [ 279.985298] do_syscall_64+0x3d/0x90 [ 279.986076] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.987532] The buggy address belongs to the object at ffff888147e2bf00 which belongs to the cache kmalloc-192 of size 192 [ 279.989747] The buggy address is located 32 bytes inside of freed 192-byte region [ffff888147e2bf00, ffff888147e2bfc0) [ 279.992367] The buggy address belongs to the physical page: [ 279.993430] page:00000000550f405c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147e2a [ 279.995182] head:00000000550f405c order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 279.996713] anon flags: 0x200000000010200(slab|head|node=0|zone=2) [ 279.997878] raw: 0200000000010200 ffff888100042a00 0000000000000000 dead000000000001 [ 279.999384] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 280.000894] page dumped because: kasan: bad access detected [ 280.002386] Memory state around the buggy address: [ 280.003338] ffff888147e2be00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 280.004781] ffff888147e2be80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 280.006224] >ffff888147e2bf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 280.007700] ^ [ 280.008592] ffff888147e2bf80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 280.010035] ffff888147e2c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 280.011564] ================================================================== Fixes: 59094b1e ("net: sched: use flow block API") Signed-off-by:Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
-
Eric Dumazet authored
David Ahern reported crashes in skb_copy_ubufs() caused by TCP tx zerocopy using hugepages, and skb length bigger than ~68 KB. skb_copy_ubufs() assumed it could copy all payload using up to MAX_SKB_FRAGS order-0 pages. This assumption broke when BIG TCP was able to put up to 512 KB per skb. We did not hit this bug at Google because we use CONFIG_MAX_SKB_FRAGS=45 and limit gso_max_size to 180000. A solution is to use higher order pages if needed. v2: add missing __GFP_COMP, or we leak memory. Fixes: 7c4e983c ("net: allow gso_max_size to exceed 65536") Reported-by:
-
Cosmo Chou authored
ncsi_channel_is_tx() determines whether a given channel should be used for Tx or not. However, when reconfiguring the channel by handling a Configuration Required AEN, there is a misjudgment that the channel Tx has already been enabled, which results in the Enable Channel Network Tx command not being sent. Clear the channel Tx enable flag before reconfiguring the channel to avoid the misjudgment. Fixes: 8d951a75 ("net/ncsi: Configure multi-package, multi-channel modes with failover") Signed-off-by:
Cosmo Chou <chou.cosmo@gmail.com> Signed-off-by:
-
- 27 Apr, 2023 11 commits
-
-
Paolo Abeni authored
Geetha sowjanya says: ==================== Macsec fixes for CN10KB This patch set has fixes for the issues encountered while testing macsec on CN10KB silicon. Below is the description of patches: Patch 1: For each LMAC two MCSX_MCS_TOP_SLAVE_CHANNEL_CFG registers exist in CN10KB. Bypass has to be disabled in two registers. Patch 2: Add workaround for errata w.r.t accessing TCAM DATA and MASK registers. Patch 3: Fixes the parser configuration to allow PTP traffic. Patch 4: Addresses the IP vector and block level interrupt mask changes. Patch 5: Fix NULL pointer crashes when rebooting Patch 6: Since MCS is global block shared by all LMACS the TCAM match must include macsec DMAC also to distinguish each macsec interface Patch 7: Before freeing MCS hardware resource to AF clear the stats also. Patch 8: Stats which share single counter in hardware are tracked in software. This tracking was based on wrong secy mode params. Use correct secy mode params Patch 9: When updating secy mode params, PN number was also reset to initial values. Hence do not write to PN value register when updating secy. ==================== Link: https://lore.kernel.org/r/20230426062528.20575-1-gakula@marvell.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Subbaraya Sundeep authored
After creating SecYs, SCs and SAs a SecY can be modified to change attributes like validation mode, protect frames mode etc. During this SecY update, packet number is reset to initial user given value by mistake. Hence do not reset PN when updating SecY parameters. Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Subbaraya Sundeep authored
Macsec stats like InPktsLate and InPktsDelayed share same counter in hardware. If SecY replay_protect is true then counter represents InPktsLate otherwise InPktsDelayed. This mode change was tracked based on protect_frames instead of replay_protect mistakenly. Similarly InPktsUnchecked and InPktsOk share same counter and mode change was tracked based on validate_check instead of validate_disabled. This patch fixes those problems. Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Subbaraya Sundeep authored
When freeing MCS hardware resources like SecY, SC and SA the corresponding stats needs to be cleared. Otherwise previous stats are shown in newly created macsec interfaces. Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Subbaraya Sundeep authored
On CN10KB silicon a single hardware macsec block is present and offloads macsec operations for all the ethernet LMACs. TCAM match with macsec ethertype 0x88e5 alone at RX side is not sufficient to distinguish all the macsec interfaces created on top of netdevs. Hence append the DMAC of the macsec interface too. Otherwise the first created macsec interface only receives all the macsec traffic. Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Subbaraya Sundeep authored
When system is rebooted after creating macsec interface below NULL pointer dereference crashes occurred. This patch fixes those crashes by using correct order of teardown [ 3324.406942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 3324.415726] Mem abort info: [ 3324.418510] ESR = 0x96000006 [ 3324.421557] EC = 0x25: DABT (current EL), IL = 32 bits [ 3324.426865] SET = 0, FnV = 0 [ 3324.429913] EA = 0, S1PTW = 0 [ 3324.433047] Data abort info: [ 3324.435921] ISV = 0, ISS = 0x00000006 [ 3324.439748] CM = 0, WnR = 0 .... [ 3324.575915] Call trace: [ 3324.578353] cn10k_mdo_del_secy+0x24/0x180 [ 3324.582440] macsec_common_dellink+0xec/0x120 [ 3324.586788] macsec_notify+0x17c/0x1c0 [ 3324.590529] raw_notifier_call_chain+0x50/0x70 [ 3324.594965] call_netdevice_notifiers_info+0x34/0x7c [ 3324.599921] rollback_registered_many+0x354/0x5bc [ 3324.604616] unregister_netdevice_queue+0x88/0x10c [ 3324.609399] unregister_netdev+0x20/0x30 [ 3324.613313] otx2_remove+0x8c/0x310 [ 3324.616794] pci_device_shutdown+0x30/0x70 [ 3324.620882] device_shutdown+0x11c/0x204 [ 966.664930] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 966.673712] Mem abort info: [ 966.676497] ESR = 0x96000006 [ 966.679543] EC = 0x25: DABT (current EL), IL = 32 bits [ 966.684848] SET = 0, FnV = 0 [ 966.687895] EA = 0, S1PTW = 0 [ 966.691028] Data abort info: [ 966.693900] ISV = 0, ISS = 0x00000006 [ 966.697729] CM = 0, WnR = 0 [ 966.833467] Call trace: [ 966.835904] cn10k_mdo_stop+0x20/0xa0 [ 966.839557] macsec_dev_stop+0xe8/0x11c [ 966.843384] __dev_close_many+0xbc/0x140 [ 966.847298] dev_close_many+0x84/0x120 [ 966.851039] rollback_registered_many+0x114/0x5bc [ 966.855735] unregister_netdevice_many.part.0+0x14/0xa0 [ 966.860952] unregister_netdevice_many+0x18/0x24 [ 966.865560] macsec_notify+0x1ac/0x1c0 [ 966.869303] raw_notifier_call_chain+0x50/0x70 [ 966.873738] call_netdevice_notifiers_info+0x34/0x7c [ 966.878694] rollback_registered_many+0x354/0x5bc [ 966.883390] unregister_netdevice_queue+0x88/0x10c [ 966.888173] unregister_netdev+0x20/0x30 [ 966.892090] otx2_remove+0x8c/0x310 [ 966.895571] pci_device_shutdown+0x30/0x70 [ 966.899660] device_shutdown+0x11c/0x204 [ 966.903574] __do_sys_reboot+0x208/0x290 [ 966.907487] __arm64_sys_reboot+0x20/0x30 [ 966.911489] el0_svc_handler+0x80/0x1c0 [ 966.915316] el0_svc+0x8/0x180 [ 966.918362] Code: f9400000 f9400a64 91220014 f94b3403 (f9400060) [ 966.924448] ---[ end trace 341778e799c3d8d7 ]--- Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Geetha sowjanya authored
On CN10KB, MCS IP vector number, BBE and PAB interrupt mask got changed to support more block level interrupts. To address this changes, this patch fixes the bbe and pab interrupt handlers. Fixes: 6c635f78 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by:
-
Geetha sowjanya authored
When ptp timestamp is enabled in RPM, RPM will append 8B timestamp header for all RX traffic. MCS need to skip these 8 bytes header while parsing the packet header, so that correct tcam key is created for lookup. This patch fixes the mcs parser configuration to skip this 8B header for ptp packets. Fixes: ca7f49ff ("octeontx2-af: cn10k: Introduce driver for macsec block.") Signed-off-by:
-
Subbaraya Sundeep authored
As per hardware errata on CN10KB, all the four TCAM_DATA and TCAM_MASK registers has to be written at once otherwise write to individual registers will fail. Hence write to all TCAM_DATA registers and then to all TCAM_MASK registers. Fixes: cfc14181 ("octeontx2-af: cn10k: mcs: Manage the MCS block hardware resources") Signed-off-by:
-
Geetha sowjanya authored
For each lmac port, MCS has two MCS_TOP_SLAVE_CHANNEL_CONFIGX registers. For CN10KB both register need to be configured for the port level mcs bypass to work. This patch also sets bitmap of flowid/secy entry reserved for default bypass so that these entries can be shown in debugfs. Fixes: bd69476e ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by:
-
John Hickey authored
Commit 4fe81585 ("ixgbe: let the xdpdrv work with more than 64 cpus") adds support to allow XDP programs to run on systems with more than 64 CPUs by locking the XDP TX rings and indexing them using cpu % 64 (IXGBE_MAX_XDP_QS). Upon trying this out patch on a system with more than 64 cores, the kernel paniced with an array-index-out-of-bounds at the return in ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example splat: ========================================================================== UBSAN: array-index-out-of-bounds in /var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26 index 65 is out of range for type 'ixgbe_ring *[64]' ========================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 65 PID: 408 Comm: ksoftirqd/65 Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020 RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe] Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9 00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7 47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0 RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282 RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000 RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000 RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001 R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000 R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ixgbe_poll+0x103e/0x1280 [ixgbe] ? sched_clock_cpu+0x12/0xe0 __napi_poll+0x30/0x160 net_rx_action+0x11c/0x270 __do_softirq+0xda/0x2ee run_ksoftirqd+0x2f/0x50 smpboot_thread_fn+0xb7/0x150 ? sort_range+0x30/0x30 kthread+0x127/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x30 </TASK> I think this is how it happens: Upon loading the first XDP program on a system with more than 64 CPUs, ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However, immediately after this, the rings are reconfigured by ixgbe_setup_tc. ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop. ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if it is non-zero. Commenting out the decrement in ixgbe_free_q_vector stopped my system from panicing. I suspect to make the original patch work, I would need to load an XDP program and then replace it in order to get ixgbe_xdp_locking_key back above 0 since ixgbe_setup_tc is only called when transitioning between XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is incremented every time ixgbe_xdp_setup is called. Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems with more than 64 CPUs. Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied to the number of CPUs present, there is no reason to disable it upon unloading an XDP program. To avoid confusion, I have moved enabling ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path. Fixes: 4fe81585 ("ixgbe: let the xdpdrv work with more than 64 cpus") Signed-off-by:
John Hickey <jjh@daedalian.us> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230425170308.2522429-1-anthony.l.nguyen@intel.comSigned-off-by:
-
