- 27 Sep, 2022 6 commits
-
-
Chris Wilson authored
Now that the scratch page and page directories have a reference back to the i915_address_space, we cannot do an immediate free of the ppgtt upon error as those buffer objects will perform a later i915_vm_put in their deferred frees. The downside is that by replacing the onion unwind along the error paths, the ppgtt cleanup must handle a partially constructed vm. This includes ensuring that the vm->cleanup is set prior to the error path. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6900Signed-off-by:
Chris Wilson <chris.p.wilson@intel.com> Fixes: 4d8151ae ("drm/i915: Don't free shared locks while shared") Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v5.14+ Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Ville Syrjälä authored
We always allocate two DPLLs (TC and TBT) for TC ports. This is because we can't know ahead of time wherher we need to put the PHY into DP-Alt or TBT mode. However during readout we can obviously only read out the state of the DPLL that the port is actually using. Thus the state after readout will not have both DPLLs populated. We run into problems if during readout the TC port is in DP-Alt mode, but we then perform a modeset on the port without going through the full .compute_config() machinery, and during said modeset the port cannot be switched back into DP-Alt mode and we need to take the TBT fallback path. Such a modeset can happen eg. due to cdclk reprogramming. This wasn't a problem earlier because we did all the DPLL calculations much later in the modeset. So even if flagged a modeset very late we'd still have gone through the DPLL calculations. But now all the DPLL calculations happen much earlier and so we need to deal with it, or else we'll attempt a modeset without a DPLL. To guarantee that we always have both DPLLs fully cal/ulated for TC ports force a full modeset computation during the initial commit. v2: Avoid bitwise operation on bool (Jani) Call the return variable 'fastset' to convey its meaning Reported-by:Lee Shawn C <shawn.c.lee@intel.com> Fixes: b000abd3 ("drm/i915: Do .crtc_compute_clock() earlier") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220922191236.4194-1-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com> (cherry picked from commit eddb4afc) Signed-off-by:
-
Jani Nikula authored
Commit 00c6cbfd ("drm/i915: move pipe_mask and cpu_transcoder_mask to runtime info") moved the pipe_mask member from struct intel_device_info to intel_runtime_info, but overlooked some of our platforms initializing device info .display = {}. This is significant, as pipe_mask is the single point of truth for a device having a display or not; the platforms in question left pipe_mask to whatever was set for the platforms they "inherit" from in the complex macro scheme we have. Add new NO_DISPLAY macro initializing .__runtime.pipe_mask = 0, which will cause the device info .display sub-struct to be zeroed in intel_device_info_runtime_init(). A better solution (or simply audit of proper use of HAS_DISPLAY() checks) is required before moving forward with [1]. Also clear all the display related members in runtime info if there's no display. The latter is a bit tedious, but it's for completeness at this time, to ensure similar functionality as before. [1] https://lore.kernel.org/r/dfda1bf67f02ceb07c280b7a13216405fd1f7a34.1660137416.git.jani.nikula@intel.com Fixes: 00c6cbfd ("drm/i915: move pipe_mask and cpu_transcoder_mask to runtime info") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Maarten Lankhort <maarten.lankhorst@linux.intel.com> Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Acked-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916082642.3451961-1-jani.nikula@intel.com (cherry picked from commit 86570b7b) Signed-off-by:
-
Nirmoy Das authored
For delayed BO release i915_ttm_delete_mem_notify() gets called twice, once with proper bo->resource and another time with NULL. We shouldn't do anything for the 2nd time as we already cleaned up the obj once. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6850 Fixes: ad74457a ("drm/i915/dgfx: Release mmap on rpm suspend") Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
-
Jani Nikula authored
The ipc_enabled member was supposed to be moved under the display wm sub-struct, but due to a rebase fail only the new one was added and the old one was left behind. Finish the job. Fixes: 70296670 ("drm/i915/display: move IPC under display wm sub-struct") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
John Harrison authored
A patch was merged to remove the GuC log size override module parameters. That patch was broken and caused kernel error messages on boot in non CONFIG_DEBUG_GUC|GEM builds: [ 12.085121] i915 0000:00:02.0: [drm] *ERROR* Zero GuC log crash dump size! [ 12.092035] i915 0000:00:02.0: [drm] *ERROR* Zero GuC log debug size! So fit it. Fixes: f54e515c ("drm/i915/guc: Remove log size module parameters") Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Julia Lawall <Julia.Lawall@inria.fr> Cc: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220913010929.2734885-2-John.C.Harrison@Intel.com (cherry picked from commit 01f0ce3e) Signed-off-by:
-
- 22 Sep, 2022 1 commit
-
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
- Misc fixes and improvements to the R-Car DU driver - Synopsys DW HDMI bridge DT bindings update Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/YxkL+tRI8uXDCvj9@pendragon.ideasonboard.com
-
- 21 Sep, 2022 1 commit
-
-
https://gitlab.freedesktop.org/agd5f/linuxDave Airlie authored
amd-drm-next-6.1-2022-09-16: amdgpu: - PCI AER fixes - BACO fix - RAS fixes - XGMI fixes - Display SubVP fixes - DCN 3.2 updates - DCN 3.1.4 updates - LLVM fixes - CS cleanup in preparation for gang submit - Add some new GC CG registers - Misc cleanups amdkfd: - Fix CRIU regression - CPU fault on COW mapping fixes - Prefault fixes - Misc cleanups radeon: - Misc cleanups Signed-off-by:
-
- 20 Sep, 2022 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-2022-09-16-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull #2 for v6.1: Features and functionality: - More Meteorlake platform enabling (Radhakrishna, Imre, Madhumitha) - Allow seamless M/N changes on eDP panels that support it (Ville) - Switch DSC debugfs from output bpp to input bpc (Swati) Refactoring and cleanups: - Clocking and DPLL refactoring and cleanups to support seamless M/N (Ville) - Plenty of VBT definition and parsing updates and cleanups (Ville) - Extract SKL watermark code to a separate file, and clean up (Ville) - Clean up IPC interfaces and debugfs (Jani) - Continue moving display data under drm_i915_private display sub-struct (Jani) - Display quirk handling refactoring and abstractions (Jani) - Stop using implicit dev_priv in gmbus registers (Jani) - BUG_ON() removals and conversions to drm_WARN_ON() and BUILD_BUG_ON() (Jani) - Use drm_dp_phy_name() for logging (Jani) - Use REG_BIT() macros for CDCLK registers (Stan) - Move display and media IP versions to runtime info (Radhakrishna) Fixes: - Fix DP MST suspend to avoid use-after-free (Andrzej) - Fix HPD suspend to avoid use-after-free for fbdev (Andrzej) - Fix various PSR issues regarding selective update and damage clips (Jouni) - Fix runtime pm wakerefs for driver remove and release (Mitul Golani) - Fix conditions for filtering fixed modes for panels (Ville) - Fix TV encoder clock computation (Ville) - Fix dvo mode_valid hook return type (Nathan Huckleberry) Merges: - Backmerge drm-next to sync the DP MST atomic changes (Jani) Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2022-09-16' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: - MEI subsystem pieces for XeHP SDV GSC support These are Acked-by Greg. Driver Changes: - Release mmaps on RPM suspend on discrete GPUs (Anshuman) - Update GuC version to 7.5 on DG1, DG2 and ADL - Revert "drm/i915/dg2: extend Wa_1409120013 to DG2" (Lucas) - MTL enabling incl. standalone media (Matt R, Lucas) - Explicitly clear BB_OFFSET for new contexts on Gen8+ (Chris) - Fix throttling / perf limit reason decoding (Ashutosh) - XeHP SDV GSC support (Vitaly, Alexander, Tomas) - Fix issues with overrding firmware file paths (John) - Invert if-else ladders to check latest version first (Lucas) - Cancel GuC engine busyness worker synchronously (Umesh) - Skip applying copy engine fuses outside PVC (Lucas) - Eliminate Gen10 frequency read function (Lucas) - Static code checker fixes (Gaosheng) - Selftest improvements (Chris) Signed-off-by:
-
- 16 Sep, 2022 1 commit
-
-
John Harrison authored
Going forwards, the intention is for GuC firmware files to be named for their major version only and HuC firmware files to have no version number in the name at all. This patch adds those entries for all platforms that are officially GuC/HuC enabled. Also, update the expected GuC version numbers to the latest firmware release for those platforms. Signed-off-by:
-
- 15 Sep, 2022 5 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
drm/i915 feature pull for v6.1: Features and functionality: - Early Meteorlake (MTL) enabling (José, Radhakrishna, Clint, Imre, Vandita, Ville, Jani) - Support more HDMI pixel clock frequencies on DG2 (Clint) - Sanity check PCI BARs (Piotr Piórkowski) - Enable DC5 on DG2 (Anusha) - DG2 DMC firmware version bump to v2.07 (Madhumitha) - New ADL-S PCI ID (José) Refactoring and cleanups: - Add display sub-struct to struct drm_i915_private (Jani) - Add initial runtime info to device info (Jani) - Split out HDCP and backlight registers to separate files (Jani) Fixes: - Skip wm/ddb readout for disabled pipes (Ville) - HDMI port timing quirk for GLK ECS Liva Q2 (Diego Santa Cruz) - Fix bw init null pointer dereference (Łukasz Bartosik) - Disable PPS power hook for DP AUX backlight (Jouni) - Avoid warnings on registering multiple backlight devices (Arun) - Fix dual-link DSI backlight and CABC ports for display 11+ (Jani) - Fix Type-C PHY ownership programming in HDMI legacy mode (Imre) - Fix unclaimed register access while loading PIPEDMC-C/D (Imre) - Bump up CDCLK for DG2 (Stan) - Prune modes that require HDMI 2.1 FRL (Ankit) - Disable FBC when PSR1 is enabled in display 12-13 (Matt) - Fix TGL+ HDMI transcoder clock and DDI BUF disable order (Imre) - Disable PSR before disable pipe (José) - Disable DMC handlers during firmware loading/disabling on display 12+ (Imre) - Disable clock gating for PIPEDMC-A/B as a workaround (Imre) Merges: - Two drm-next backmerges (Rodrigo, Jani) Signed-off-by:
-
Nathan Huckleberry authored
All of the functions used for intel_dvo_dev_ops.mode_valid have a return type of enum drm_mode_status, but the mode_valid field in the struct definition has a return type of int. The mismatched return type breaks forward edge kCFI since the underlying function definitions do not match the function hook definition. The return type of the mode_valid field should be changed from int to enum drm_mode_status. Reported-by:
Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Continue converting the driver to the convention of last version first, extending it to the future platforms. Now, any GRAPHICS_VER >= 11 will be handled by the first branch. Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Instead of calling read_clock_frequency() to walk the if/else ladder per platform, move the ladder to intel_gt_init_clock_frequency() and use one function per branch. With the new logic, it's now clear the call to gen9_get_crystal_clock_freq() was just dead code, as gen9 is handled by another function and there is no version 10. Remove that function and the caller. v2: Correctly handle intel_gt_check_clock_frequency() that also calls the function to read clock frequency (Gustavo) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Continue converting the driver to the convention of last version first, extending it to the future platforms. Now, any GRAPHICS_VER >= 11 will be handled by the first branch. With the new ranges it's easier to see what platform a branch started to be taken. Besides the >= 11 change, the branch taken for GRAPHICS_VER == 10 is also different, but currently there is no such platform in i915. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220908-if-ladder-v2-1-7a7b15545c93@intel.com
-
- 14 Sep, 2022 23 commits
-
-
John Harrison authored
The earlier update to support reduced versioning of firmware files introduced an issue with the firmware override module parameter. A self test would specify an invalid file name (invalid meaning not in the table) both with and without setting the override flag. The *non-override* case would cause an infinite loop. I.e. a situation that is impossible to hit outside of the selftest because either the file name has come from the table in first place or it came from an override. However, the override case was also broken in that it would bypass some of the later processing. The first fix is to update the scanning loop code so that if an invalid file is passed in, it will exit rather than loop forever. So if the impossible situation did somehow occur in the future, it wouldn't be such a big problem. The second flips the logic on the override early exit to be negative rather than positive. That way if an explicit override has been set, then it won't try to scan for backup options (because there is no point anyway - the user wanted X and if X is not available, that's their problem). It also means that it won't skip code that still needs to be run once a valid firmware file has been selected. v2: Also remove ANSI colour codes that accidentally got left in an error message in the original patch. Fixes: 665ae9c9 ("drm/i915/uc: Support for version reduced and multiple firmware files") Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by:
-
Madhumitha Tolakanahalli Pradeep authored
In Display version 14, Transcoder Chicken Registers have updated address. This patch performs checks to use the right register when required. v2: Omit display version check in i915_reg.h(Jani) v3: - Remove extra whitespace introduced - Fix reg definitions for MTL_CHICKEN_TRANS(MattR) Bspec: 34387, 50054 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
-
Radhakrishna Sripada authored
Display version 14 platforms have different credits values compared to ADL-P. Update the credits based on pipe usage. v2: Simplify DBOX BW Credit definition(MattR) v3: - Simplify only pipe per dbuf bank check(MattR) - Skip modeset check to handle the case when a new pipe within dbuf bank gets added/removed.(MattR) Bspec: 49213 Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Original Author: Caz Yokoyama Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Yihao Han authored
./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c:729:63-68: WARNING: conversion to bool not needed here Generated by: scripts/coccinelle/misc/boolconv.cocci Signed-off-by:
Yihao Han <hanyihao@vivo.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jiapeng Chong authored
drm/amd/display: make optc32_phantom_crtc_post_enable, optc32_setup_manual_trigger and optc32_set_drr static These three functions are not used outside the function dcn32_optc.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:159:6: warning: no previous prototype for function 'optc32_phantom_crtc_post_enable'. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:218:6: warning: no previous prototype for ‘optc32_set_drr’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:193:6: warning: no previous prototype for ‘optc32_setup_manual_trigger’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2140Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Jiapeng Chong authored
These functions are not used outside the file dcn32_dccg.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:257:6: warning: no previous prototype for ‘dccg32_otg_drop_pixel’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:248:6: warning: no previous prototype for ‘dccg32_otg_add_pixel’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:211:6: warning: no previous prototype for ‘dccg32_set_dpstreamclk’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:136:6: warning: no previous prototype for ‘dccg32_set_dtbclk_dto’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2142Reported-by:
-
Jiapeng Chong authored
These functions are not used outside the file dcn32_hubbub.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:912:6: warning: no previous prototype for ‘hubbub32_force_wm_propagate_to_pipes’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:823:6: warning: no previous prototype for ‘hubbub32_wm_read_state’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:772:6: warning: no previous prototype for ‘hubbub32_init_watermarks’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:712:6: warning: no previous prototype for ‘hubbub32_force_usr_retraining_allow’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2141Reported-by:
-
Jiapeng Chong authored
This symbol is not used outside of dcn32_mmhubbub.c, so marks it static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mmhubbub.c:103:6: warning: no previous prototype for ‘mmhubbub32_config_mcif_buf’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2145Reported-by:
-
Jiapeng Chong authored
These functions are not used outside the file dcn32_hubbub.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:223:6: warning: no previous prototype for ‘dccg314_set_valid_pixel_rate’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:184:6: warning: no previous prototype for ‘dccg314_set_dpstreamclk’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:140:6: warning: no previous prototype for ‘dccg314_set_dtbclk_dto’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2144Reported-by:
-
Jiapeng Chong authored
This symbol is not used outside of dcn314_optc.c, so marks it static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:153:6: warning: no previous prototype for ‘optc314_phantom_crtc_post_enable’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2147Reported-by:
-
Jiapeng Chong authored
This symbol is not used outside of dcn314_dio_stream_encoder.c, so marks it static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dio_stream_encoder.c:84:6: warning: no previous prototype for ‘enc314_stream_encoder_dvi_set_stream_attribute’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2146Reported-by:
-
Jiapeng Chong authored
These functions are not used outside the file dcn30_resource.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1949:6: warning: no previous prototype for ‘is_refresh_rate_support_mclk_switch_using_fw_based_vblank_stretch’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1919:5: warning: no previous prototype for ‘get_frame_rate_at_max_stretch_100hz’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2143Reported-by:
-
Alex Deucher authored
Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Alex Deucher authored
This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
-
Alex Deucher authored
This mirrors what we do for other asics and this way we are sure the ih doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. In this case IH is initialized before GFX, so there should be no issue. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
-
Li Ma authored
Add new gpu_metrics_v2_3 to acquire average temperature info from SMU metrics. To acquire average temp info from gpu_metrics interface, but gpu_metrics_v2_2 only has members to show current temp info. --- v1: Only add average_temperature_gfx in gpu_metrics_v2_3. v2: Add average temp members for soc, core and l3 in gpu_metrics_v2_3 and put these new members at the end of gpu_metrics_v2_3. Add operation to read average temp info from metrics table. v3: Merge v1 and v2 and rename the patch. v4: Merge v3. Add firmware version judgment in vangogh_common_get_gpu_metrics to maintain backward compatibility and rename the patch. "return ret" on error scenario in smu_cmn_get_smc_version. Signed-off-by:
Li Ma <li.ma@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Anshuman Gupta authored
Release all mmap mapping for all lmem objects which are associated with userfault such that, while pcie function in D3hot, any access to memory mappings will raise a userfault. Runtime resume the dgpu(when gem object lies in lmem). This will transition the dgpu graphics function to D0 state if it was in D3 in order to access the mmap memory mappings. v2: - Squashes the patches. [Matt Auld] - Add adequate locking for lmem_userfault_list addition. [Matt Auld] - Reused obj->userfault_count to avoid double addition. [Matt Auld] - Added i915_gem_object_lock to check i915_gem_object_is_lmem. [Matt Auld] v3: - Use i915_ttm_cpu_maps_iomem. [Matt Auld] - Fix 'ret == 0 to ret == VM_FAULT_NOPAGE'. [Matt Auld] - Reuse obj->userfault_count as a bool 0 or 1. [Matt Auld] - Delete the mmaped obj from lmem_userfault_list in obj destruction path. [Matt Auld] - Get a wakeref for object destruction patch. [Matt Auld] - Use intel_wakeref_auto to delay runtime PM. [Matt Auld] v4: - Avoid using mmo offset to get the vma_node. [Matt Auld] - Added comment to use the lmem_userfault_lock. [Matt Auld] - Get lmem_userfault_lock in i915_gem_object_release_mmap_offset. [Matt Auld] - Fixed kernel test robot generated warning. v5: - Addressed the cosmetics comments. [Andi] - Changed i915_gem_runtime_pm_object_release_mmap_offset() name to i915_gem_object_runtime_pm_release_mmap_offset() to be rhythmic. PCIe Specs 5.3.1.4.1 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6331 Cc: Matthew Auld <matthew.auld@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220913152714.16541-3-anshuman.gupta@intel.com
-
Anshuman Gupta authored
Refactor userfault_wakeref to re-use for discrete lmem mmap mapping as well, as on discrete GTT mmap are not supported. Moving userfault_wakeref from ggtt to gt structure. Signed-off-by:
-
Chris Wilson authored
When testing whether we can get the GPU to leak information about non-privileged state, we first need to ensure that the output buffer is set to a known value as the HW may opt to skip the write into memory for a non-privileged read of a sensitive register. We chose POISON_INUSE (0x5a) so that is both non-zero and distinct from the poison values used during the test. v2: Use i915_gem_object_pin_map_unlocked Reported-by:
CQ Tang <cq.tang@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: CQ Tang <cq.tang@intel.com> cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Signed-off-by:
Karolina Drobnik <karolina.drobnik@intel.com> Reviewed-by:
-
Chris Wilson authored
Ensure that we always signal the semaphore when timing out, so that if it happens to be stuck waiting for the semaphore we will quickly recover without having to wait for a reset. Reported-by:
-
Chris Wilson authored
In order to keep the context image parser simple, we assume that all commands follow a similar format. A few, especially not MI commands on the render engines, have fixed lengths not encoded in a length field. This caused us to incorrectly skip over 3D state commands, and start interpreting context data as instructions. Eventually, as Daniele discovered, this would lead us to find addition LRI as part of the data and mistakenly add invalid LRI commands to the context probes. Stop parsing after we see the first !MI command, as we know we will have seen all the context registers by that point. (Mostly true for all gen so far, though the render context does have LRI after the first page that we have been ignoring so far. It would be useful to extract those as well so that we have the full list of user accessible registers.) Similarly, emit a warning if we do try to emit an invalid zero-length LRI. Testcase: igt@i915_selftest@live@gt_lrc Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6580 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6670Reported-by:
-
Chris Wilson authored
Even though the initial protocontext we load onto HW has the register cleared, by the time we save it into the default image, BB_OFFSET has had the enable bit set. Reclear BB_OFFSET for each new context. Testcase: igt/i915_selftests/gt_lrc v2: Extend it for gen8. v3: BB_OFFSET is recorded per engine from Gen9 onwards Signed-off-by:
-
Swati Sharma authored
Convert dsc debugfs entry from output_bpp to input_bpc. The rationale is to validate different input bpc across various platforms. v2: -improved commit message (Jani N) -styling fixes (Jani N) Signed-off-by:Swati Sharma <swati2.sharma@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Acked-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220902190658.9459-2-swati2.sharma@intel.com
-
- 13 Sep, 2022 1 commit
-
-
Lucas De Marchi authored
Support for reading the fuses to check what are the Link Copy engines was added in commit ad5f74f3 ("drm/i915/pvc: read fuses for link copy engines"). However they were added unconditionally because the FUSE3 register is present since graphics version 10. However the bitfield with meml3 fuses only exists since graphics version 12. Moreover, Link Copy engines are currently only available in PVC. Tying additional copy engines to the meml3 fuses is not correct for other platforms. Make sure there is a check for `12.60 <= ver < 12.70`. Later platforms may extend this function later if it's needed to fuse off copy engines. Currently it's harmless as the Link Copy engines are still not exported: info->engine_mask only has BCS0 set and the register is only read for platforms that do have it. Signed-off-by:
-
