Add gpio property used for selecting CTIA/OMTP headset connected
to wcd codec.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1644668672-29790-3-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add switch control for selecting CTIA or OMTP Headset by swapping
gnd and mic with the help of GPIO.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1644668672-29790-2-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Functions won't be directly used outside of compress.c file
so mark them as static.

This will also fix warnings reported by kernel test robot:

>> sound/soc/sof/compress.c:91:5: warning: no previous prototype for
function 'sof_compr_open' [-Wmissing-prototypes]
   int sof_compr_open(struct snd_soc_component *component,
       ^
   sound/soc/sof/compress.c:91:1: note: declare 'static' if the function
is not intended to be used outside of this translation unit
   int sof_compr_open(struct snd_soc_component *component,

Fixes: 6324cf90 ("SoC: SOF: compr: Add compress ops implementation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220211082631.179735-1-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Platform_driver probe functions aren't called with locks held
and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead.

Problem found with Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220210204223.104181-4-Julia.Lawall@inria.frSigned-off-by: Mark Brown <broonie@kernel.org>

Enable access to the speaker protection firmware debug stream
using compress stream API and lower minimum fragment size to
16 words.
Signed-off-by: Vlad Karpovich <Vlad.Karpovich@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220210172053.22782-3-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Newer firmwares will support compressed buffers that may or may not
exist, for example debugging streams. Update the driver to make a
compressed stream optional. A warning will still be generated at DSP
boot time and opening the stream will fail if the compressed buffer in
question does not exist, however the DSP can still be booted and other
features used.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220210172053.22782-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The TLV320ADC3001/3101 have an internal DSP, which can either be
used in various preset configurations (called "Processing Blocks"
in the data sheet), or as a freely programmable (using the
"PurePath Studio" graphical programming tool from TI) but rather
small DSP ("miniDSP").

Using the default configuration (PRB_R1) it's possible to set up
filtering using a first-order IIR, which can be useful for adding
a digital high pass filter to the signal chain, for instance.

This patch adds support for configuring the IIR filter coefficients.
The filter itself is always enabled; the default coefficients
implement a pass-through function.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2202101805360.7068@lnxricardw1.se.axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

The Linux SOF implementation is historically monolithic in a sense that all
features accessible in the firmware can be used via the snd_sof_dev struct in
one way or another.

Support for features can not be added or removed runtime and with the current
way of things it is hard if not impossible to implement support for dynamic
feature support when based on the firmware manifest we can easily enable/access
independent modules with the SOF.

In order to be able to support such modularity this series introduces a small
framework within SOF for client support using the Auxiliary bus.

Client drivers can be removed runtime and later re-loaded if needed without
affecting the core's behaviour, but it is the core's and the platform's duty
to create the Auxiliary devices usable in the platform and via the firmware.

There is still a need for SOF manifest update to convey information about
features to really make the full dynamic client device creation.

The series will introduce the core SOF client support and converts the generic
ipc flood test, ipc message injector and the probes (Intel HDA only) to a client
driver.

Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>:

Convert Samsung DT bindings to dtschema

Merge series from Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>:

This patch set is to add support for SC7280 sound card registration and
to add dt-bindings documentation file.

Add a new client driver for probes support and move
all the probes-related code from the core to the
client driver.

The probes client driver registers a component driver
with one CPU DAI driver for extraction and creates a
new sound card with one DUMMY DAI link with a dummy codec
that will be used for extracting audio data from specific
points in the audio pipeline.

The probes debugfs ops are based on the initial
implementation by Cezary Rojewski and have been moved
out of the SOF core into the client driver making it
easier to maintain. This change will make it easier
for the probes functionality to be added for all platforms
without having the need to modify the existing(15+) machine
drivers.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-10-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Move the IPC message injection code out from the debug file as separate
SOF client driver.

Based on the kernel configuration, the device registration for the new IPC
message injector is going to happen in the core.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-9-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Move the IPC flood test code out from the debug file as separate SOF client
driver.

Based on the kernel configuration, the device registration for the new IPC
flood test is going to happen in the core.
With the separate client driver it is going to be possible to run multiple
flood tests in parallel to increase the stress, the new Kconfig option can
be used to select this (defaults to 1).
In order to preserve backward compatibility with existing SW/scripts, the
first IPC flood test's debugfs files have been linked to the old files.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-8-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some SOF client can be of 'passive' type, meaning that they do not handle
PM framework callbacks by themselves but rely on the auxiliary driver's
suspend and resume callbacks to be notified about the core's suspend or
resume event.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-7-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

A client in the SOF (Sound Open Firmware) context is a driver that needs
to communicate with the DSP via IPC messages. The SOF core is responsible
for serializing the IPC messages to the DSP from the different clients.

One example of an SOF client would be an IPC test client that floods the
DSP with test IPC messages to validate if the serialization works as
expected.

Multi-client support will also add the ability to split the existing audio
cards into multiple ones, so as to e.g. to deal with HDMI with a dedicated
client instead of adding HDMI to all cards.

This patch introduces descriptors for SOF client driver and SOF client
device along with APIs for registering and unregistering a SOF client
driver, sending IPCs from a client device and accessing the SOF core
debugfs root entry.

Along with this, add a couple of new members to struct snd_sof_dev that
will be used for maintaining the list of clients.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-6-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The utils.c contains wrappers and implementation for accessing iomem mapped
regions and a single unrelated function to create a compressed page table
from snd_dma_buffer for firmware use.

The latter is used by the PCM and the dma trace code and it needs to be
moved to a generic source/header for the client conversion to be possible.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Change the parameter list for the firmware initiated message (IPC event)
handler functions to:
handler(struct snd_sof_dev *sdev, void *full_msg);

Allocate memory and read the whole message in snd_sof_ipc_msgs_rx() then
pass the pointer to the function handling the message.
Do this only if we actually have a function which is tasked to process the
given type.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Move the enum sof_dsp_power_states to include/sound/sof.h
to be accessible outside of the core SOF stack.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The only reference to D3_HOT and D3_COLD DSP power state is in
intel/hda-dsp.c in form of a dev_dbg() print.

Remove them as they are not used and even if they are they could be
re-added via the substate.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220210150525.30756-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 8c9b9cfb ("ASoC: fsl-asoc-card: Support
fsl,imx-audio-tlv320aic31xx codec")' added support for tlv320aic31xx
codec to fsl-asoc-card, but missed the related device-tree compatible
string documentation. Fix this.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Link: https://lore.kernel.org/r/20220210134049.32576-1-ariel.dalessandro@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the audio complex on Samsung TM2 boards with Samsung Exynos SoC
to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220129122430.45694-5-krzysztof.kozlowski@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the audio complex on Google Snow boards with Samsung Exynos SoC
to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220129122430.45694-4-krzysztof.kozlowski@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the audio complex on SMDK5250 boards with Samsung Exynos SoC to
DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220129122430.45694-3-krzysztof.kozlowski@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

The Arndale audio complex might come with ALC5631 which is compatible
with RT5631.  Document the compatible since it is used in Linux kernel
sources.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220129122430.45694-2-krzysztof.kozlowski@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the audio complex on Arndale boards with Samsung Exynos SoC to
DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220129122430.45694-1-krzysztof.kozlowski@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

The cpu and codec nodes must provide sound-dai property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220129122357.45545-2-krzysztof.kozlowski@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the sysclk and sysclk_src checking in the function set_sysclk() to
prevent the PLL power off. It is not getting re-programmed during
subsequent runs after the first run (in BIAS_OFF stage).
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20220210071900.17287-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add new machine driver to register sound card on sc7280 based targets and
do the required configuration for lpass cpu dai and external codecs
connected over MI2S and soundwire interfaces.
Add support for audio jack detection, soundwire init and MBHC.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1644497415-25291-4-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add macro for lpass DAI id's max limit to create static arrays
and for array boundary checks.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1644497415-25291-3-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add devicetree bindings documentation file for sc7280 sound card
registration.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1644497415-25291-2-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the bindings for McASP controllers for TI SoCs from txt
to YAML schema.

Adds additional properties 'clocks', 'clock-names', 'power-domains',
'#sound-dai-cells' and 'port' which were missing from the txt file.
Removes properties 'sram-size-playback' and 'sram-size-capture'
since they are not used.
Adds 'dmas' and 'dma-names' in the example which were missing from
the txt file.
Changes 'interrupts' and 'interrupt-names' from optional to
required properties.
Changes 'op-modes', 'serial-dir' to optional properties as they are
not needed if the McASP is used only as GPIO.
Changes 'tdm-slots' to required property only for I2S operation mode.

Adds the yaml file in the 'MAINTAINERS' under the heading 'TEXAS
INSTRUMENTS ASoC DRIVERS'
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220209063008.2928-1-j-choudhary@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

The existing code maximizes confusion by using 'stream' and 'hstream'
variables of different types, e.g:

struct hdac_stream *stream;
struct hdac_ext_stream *stream;
struct hdac_stream *hstream;
struct hdac_ext_stream *hstream;

This confusion is partly inherited from legacy code but SOF
contributors added their own creative spin, e.g.

struct hdac_ext_stream *link_dev;
struct hdac_ext_stream *dsp_stream;
struct hdac_ext_stream hda_stream;

and my personal favorite:

stream = &hda_stream->hda_stream;

This patch suggests a consistent naming across all Intel code related
to HDAudio stream management. The convention is - by hierarchical
order:

struct sof_intel_hda_stream *hda_stream;
struct hdac_ext_stream *hext_stream;
struct hdac_stream *hstream;

No functionality change - just renaming of variables/members.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220209063104.9971-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

Hi,

the DMA trace implementation on AMD platform assumes that the stream_tag pointer
is pointing the stream_tag member of struct sof_ipc_dma_trace_params_ext, which
is true at the moment, but it can not be guarantied and a change in the dtrace
core can cause out of bound accesses for AMD.

For this reason, change the API to pass the struct itself which will remove the
assumption and makes it clear from both sides what is expected to be sent via the
parameter list.

This opens up a window to clean up the intel and AMD implementation at the same
time.

Regards,
Peter
---

Peter Ujfalusi (2):
  ASoC: SOF: intel: hda-trace: Pass the dma buffer pointer to
    hda_dsp_trace_prepare
  ASoC: SOF: dma-trace: Pass pointer to params_ext struct in
    trace_init()

 sound/soc/sof/amd/acp-trace.c   | 38 ++++++++-------------------------
 sound/soc/sof/amd/acp.h         |  3 ++-
 sound/soc/sof/intel/hda-trace.c | 17 ++++++++-------
 sound/soc/sof/intel/hda.h       |  3 ++-
 sound/soc/sof/ops.h             |  4 ++--
 sound/soc/sof/sof-priv.h        |  2 +-
 sound/soc/sof/trace.c           |  2 +-
 7 files changed, 26 insertions(+), 43 deletions(-)

--
2.35.0

Merge series from Mark Brown <broonie@kernel.org>:

This series removes a bunch of spurious selects of gpiolib that were
causing noise in randconfig build tests.

Mark Brown (6):
  ASoC: dmic: Remove spurious gpiolib select
  ASoC: rt9120: Remove spurious gpiolib select
  ASoC: simple-amplifier: Remove spurious gpiolib select
  ASoC: max9759: Remove spurious gpiolib select
  ASoC: zl38060: Remove spurious gpiolib select
  ASoC: simple-mux: Depend on gpiolib rather than selecting it

 sound/soc/codecs/Kconfig | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

base-commit: e783362e
--
2.30.2

The fsl_sai driver calculates the number of pins used and enables
multiple channels if necessary. This means the SAI expects data in
one FIFO per pin. The SDMA engine only services a single FIFO, so
multi pin support doesn't work at all.

This patch enables the software combine mode in chips that support
it. With this the SAI presents only a single FIFO to the outside
and distributes the data into the different FIFOs internally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220111081518.982437-1-s.hauer@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Implement snd_compress_ops. There are a lot of similarities with
PCM implementation.

For now we use sof_ipc_pcm_params to transfer compress parameters to SOF
firmware.

This will be changed in the future once we either add new compress
parameters to SOF or enhance existing sof_ipc_pcm_params structure
to support all native compress params.

Note that get_caps and get_codec_caps are missing and will be added
later. This is because we need to find a way to advertise DSP
capabilities depending on supported platforms.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220120143741.492634-1-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of passing a pointer to the stream_tag within the
struct sof_ipc_dma_trace_params_ext, pass the pointer to the containing
struct.

AMD needs to update buffer.phy_addr (and don't really use the stream_tag)
for the trace implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128123623.23569-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pass the snd_dma_buffer pointer as parameter to hda_dsp_trace_prepare()
function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220128123623.23569-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The simple-mux driver requires gpiolib. Currently it selects GPIOLIB but
since the use of select can lead to issues with randconfig let's instead
depend on GPIOLIB, select is more idiomatically used for Kconfig symbols
that are not user selectable but GPIOLIB is user selectable.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-7-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-6-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>