Xin Long says:

====================
net: fix the features flag in sctp_gso_segment

Patch 1/2 is to improve the code in skb_segment(), and it is needed
by Patch 2/2.
====================

Link: https://lore.kernel.org/r/cover.1610703289.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It makes more sense to clear NETIF_F_SG instead of set it when
calling skb_segment() in sctp_gso_segment(), since SCTP GSO is
using head_skb's fraglist, of which all frags are linear skbs.

This will make SCTP GSO code more understandable.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After commit 89319d38 ("net: Add frag_list support to skb_segment"),
it goes to process frag_list when !hsize in skb_segment(). However, when
using skb frag_list, sg normally should not be set. In this case, hsize
will be set with len right before !hsize check, then it won't go to
frag_list processing code.

So the right thing to do is move the hsize check to the else block, so
that it won't affect the !hsize check for frag_list processing.

v1->v2:
  - change to do "hsize <= 0" check instead of "!hsize", and also move
    "hsize < 0" into else block, to save some cycles, as Alex suggested.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

fix semicolon.cocci warnings:
drivers/net/ethernet/mscc/ocelot_net.c:460:2-3: Unneeded semicolon
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20210115095544.33164-1-vulab@iscas.ac.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Enable interrupt based Tx completions to improve latency for T5.
The consumer index (CIDX) will now come via interrupts so that Tx
SKBs can be freed up sooner in Rx path. Also, enforce CIDX flush
threshold override (CIDXFTHRESHO) to improve latency for slow
traffic. This ensures that the interrupt is generated immediately
whenever hardware catches up with driver (i.e. CIDX == PIDX is
reached), which is often the case for slow traffic.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Link: https://lore.kernel.org/r/20210115102059.6846-1-rajur@chelsio.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Lee Jones says:

====================
Rid W=1 warnings in Ethernet

This set is part of a larger effort attempting to clean-up W=1
kernel builds, which are currently overwhelmingly riddled with
niggly little warnings.

v2:
 - Squashed IBM patches
 - Fixed real issue in SMSC
 - Added Andrew's Reviewed-by tags on remainder
====================

Link: https://lore.kernel.org/r/20210115200905.3470941-1-lee.jones@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/net/ethernet/toshiba/spider_net.c:263: warning: Function parameter or member 'hwdescr' not described in 'spider_net_get_descr_status'
 drivers/net/ethernet/toshiba/spider_net.c:263: warning: Excess function parameter 'descr' description in 'spider_net_get_descr_status'
 drivers/net/ethernet/toshiba/spider_net.c:554: warning: Function parameter or member 'netdev' not described in 'spider_net_get_multicast_hash'
 drivers/net/ethernet/toshiba/spider_net.c:902: warning: Function parameter or member 't' not described in 'spider_net_cleanup_tx_ring'
 drivers/net/ethernet/toshiba/spider_net.c:902: warning: Excess function parameter 'card' description in 'spider_net_cleanup_tx_ring'
 drivers/net/ethernet/toshiba/spider_net.c:1074: warning: Function parameter or member 'card' not described in 'spider_net_resync_head_ptr'
 drivers/net/ethernet/toshiba/spider_net.c:1234: warning: Function parameter or member 'napi' not described in 'spider_net_poll'
 drivers/net/ethernet/toshiba/spider_net.c:1234: warning: Excess function parameter 'netdev' description in 'spider_net_poll'
 drivers/net/ethernet/toshiba/spider_net.c:1278: warning: Function parameter or member 'p' not described in 'spider_net_set_mac'
 drivers/net/ethernet/toshiba/spider_net.c:1278: warning: Excess function parameter 'ptr' description in 'spider_net_set_mac'
 drivers/net/ethernet/toshiba/spider_net.c:1350: warning: Function parameter or member 'error_reg1' not described in 'spider_net_handle_error_irq'
 drivers/net/ethernet/toshiba/spider_net.c:1350: warning: Function parameter or member 'error_reg2' not described in 'spider_net_handle_error_irq'
 drivers/net/ethernet/toshiba/spider_net.c:1968: warning: Function parameter or member 't' not described in 'spider_net_link_phy'
 drivers/net/ethernet/toshiba/spider_net.c:1968: warning: Excess function parameter 'data' description in 'spider_net_link_phy'
 drivers/net/ethernet/toshiba/spider_net.c:2149: warning: Function parameter or member 'work' not described in 'spider_net_tx_timeout_task'
 drivers/net/ethernet/toshiba/spider_net.c:2149: warning: Excess function parameter 'data' description in 'spider_net_tx_timeout_task'
 drivers/net/ethernet/toshiba/spider_net.c:2182: warning: Function parameter or member 'txqueue' not described in 'spider_net_tx_timeout'
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/net/ethernet/toshiba/ps3_gelic_net.c:1107: warning: Function parameter or member 'irq' not described in 'gelic_card_interrupt'
 drivers/net/ethernet/toshiba/ps3_gelic_net.c:1107: warning: Function parameter or member 'ptr' not described in 'gelic_card_interrupt'
 drivers/net/ethernet/toshiba/ps3_gelic_net.c:1407: warning: Function parameter or member 'txqueue' not described in 'gelic_net_tx_timeout'
 drivers/net/ethernet/toshiba/ps3_gelic_net.c:1439: warning: Function parameter or member 'napi' not described in 'gelic_ether_setup_netdev_ops'
 drivers/net/ethernet/toshiba/ps3_gelic_net.c:1639: warning: Function parameter or member 'dev' not described in 'ps3_gelic_driver_probe'
 drivers/net/ethernet/toshiba/ps3_gelic_net.c:1795: warning: Function parameter or member 'dev' not described in 'ps3_gelic_driver_remove'
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fixes the following W=1 kernel build warning(s):

 from drivers/net/ethernet/ibm/ibmvnic.c:35:
 inlined from ‘handle_vpd_rsp’ at drivers/net/ethernet/ibm/ibmvnic.c:4124:3:
 drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_field' not described in 'build_hdr_data'
 drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'skb' not described in 'build_hdr_data'
 drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_len' not described in 'build_hdr_data'
 drivers/net/ethernet/ibm/ibmvnic.c:1362: warning: Function parameter or member 'hdr_data' not described in 'build_hdr_data'
 drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_field' not described in 'create_hdr_descs'
 drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_data' not described in 'create_hdr_descs'
 drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'len' not described in 'create_hdr_descs'
 drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'hdr_len' not described in 'create_hdr_descs'
 drivers/net/ethernet/ibm/ibmvnic.c:1423: warning: Function parameter or member 'scrq_arr' not described in 'create_hdr_descs'
 drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'txbuff' not described in 'build_hdr_descs_arr'
 drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'num_entries' not described in 'build_hdr_descs_arr'
 drivers/net/ethernet/ibm/ibmvnic.c:1474: warning: Function parameter or member 'hdr_field' not described in 'build_hdr_descs_arr'
 drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'adapter' not described in 'do_change_param_reset'
 drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'rwi' not described in 'do_change_param_reset'
 drivers/net/ethernet/ibm/ibmvnic.c:1832: warning: Function parameter or member 'reset_state' not described in 'do_change_param_reset'
 drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'adapter' not described in 'do_reset'
 drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'rwi' not described in 'do_reset'
 drivers/net/ethernet/ibm/ibmvnic.c:1911: warning: Function parameter or member 'reset_state' not described in 'do_reset'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/net/ethernet/ti/am65-cpts.c:736: warning: Function parameter or member 'en' not described in 'am65_cpts_rx_enable'
 drivers/net/ethernet/ti/am65-cpts.c:736: warning: Excess function parameter 'skb' description in 'am65_cpts_rx_enable'
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/net/ethernet/ti/am65-cpsw-qos.c:364: warning: Function parameter or member 'ndev' not described in 'am65_cpsw_timer_set'
 drivers/net/ethernet/ti/am65-cpsw-qos.c:364: warning: Function parameter or member 'est_new' not described in 'am65_cpsw_timer_set'
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/net/xen-netback/xenbus.c:419: warning: Function parameter or member 'dev' not described in 'frontend_changed'
 drivers/net/xen-netback/xenbus.c:419: warning: Function parameter or member 'frontend_state' not described in 'frontend_changed'
 drivers/net/xen-netback/xenbus.c:1001: warning: Function parameter or member 'dev' not described in 'netback_probe'
 drivers/net/xen-netback/xenbus.c:1001: warning: Function parameter or member 'id' not described in 'netback_probe'
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fixes the following W=1 kernel build warning(s):

 drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'dev' not described in 'try_toggle_control_gpio'
 drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'desc' not described in 'try_toggle_control_gpio'
 drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'name' not described in 'try_toggle_control_gpio'
 drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'index' not described in 'try_toggle_control_gpio'
 drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'value' not described in 'try_toggle_control_gpio'
 drivers/net/ethernet/smsc/smc91x.c:2200: warning: Function parameter or member 'nsdelay' not described in 'try_toggle_control_gpio'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Following patch add support for flow based tunneling API
to send and recv GTP tunnel packet over tunnel metadata API.
This would allow this device integration with OVS or eBPF using
flow based tunneling APIs.
Signed-off-by: Pravin B Shelar <pbshelar@fb.com>
Link: https://lore.kernel.org/r/20210110070021.26822-1-pbshelar@fb.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In bictcp_reset(), use memset and offsetof instead of = 0.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Link: https://lore.kernel.org/r/1610597696-128610-1-git-send-email-yejune.deng@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Replace some checks for ETH_P_8021Q and ETH_P_8021AD in
drivers/net/tap.c with eth_type_vlan.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Link: https://lore.kernel.org/r/20210115023238.4681-1-dong.menglong@zte.com.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the struct member w of the struct urelease_work directly instead of
casting it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Link: https://lore.kernel.org/r/f0ed86d6d54ac0834bd2e161d172bf7bb5647cf7.1610683862.git.geliangtang@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
Configuring congestion watermarks on ocelot switch using devlink-sb

In some applications, it is important to create resource reservations in
the Ethernet switches, to prevent background traffic, or deliberate
attacks, from inducing denial of service into the high-priority traffic.

These patches give the user some knobs to turn. The ocelot switches
support per-port and per-port-tc reservations, on ingress and on egress.
The resources that are monitored are packet buffers (in cells of 60
bytes each) and frame references.

The frames that exceed the reservations can optionally consume from
sharing watermarks which are not per-port but global across the switch.
There are 10 sharing watermarks, 8 of them are per traffic class and 2
are per drop priority.

I am configuring the hardware using the best of my knowledge, and mostly
through trial and error. Same goes for devlink-sb integration. Feedback
is welcome.
====================

Link: https://lore.kernel.org/r/20210115021120.3055988-1-olteanv@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Using devlink-sb, we can configure 12/16 (the important 75%) of the
switch's controlling watermarks for congestion drops, and we can monitor
50% of the watermark occupancies (we can monitor the reservation
watermarks, but not the sharing watermarks, which are exposed as pool
sizes).

The following definitions can be made:

SB_BUF=0 # The devlink-sb for frame buffers
SB_REF=1 # The devlink-sb for frame references
POOL_ING=0 # The pool for ingress traffic. Both devlink-sb instances
           # have one of these.
POOL_EGR=1 # The pool for egress traffic. Both devlink-sb instances
           # have one of these.

Editing the hardware watermarks is done in the following way:
BUF_xxxx_I is accessed when sb=$SB_BUF and pool=$POOL_ING
REF_xxxx_I is accessed when sb=$SB_REF and pool=$POOL_ING
BUF_xxxx_E is accessed when sb=$SB_BUF and pool=$POOL_EGR
REF_xxxx_E is accessed when sb=$SB_REF and pool=$POOL_EGR

Configuring the sharing watermarks for COL_SHR(dp=0) is done implicitly
by modifying the corresponding pool size. By default, the pool size has
maximum size, so this can be skipped.

devlink sb pool set pci/0000:00:00.5 sb $SB_BUF pool $POOL_ING \
	size 129840 thtype static

Since by default there is no buffer reservation, the above command has
maxed out BUF_COL_SHR_I(dp=0).

Configuring the per-port reservation watermark (P_RSRV) is done in the
following way:

devlink sb port pool set pci/0000:00:00.5/0 sb $SB_BUF \
	pool $POOL_ING th 1000

The above command sets BUF_P_RSRV_I(port 0) to 1000 bytes. After this
command, the sharing watermarks are internally reconfigured with 1000
bytes less, i.e. from 129840 bytes to 128840 bytes.

Configuring the per-port-tc reservation watermarks (Q_RSRV) is done in
the following way:

for tc in {0..7}; do
	devlink sb tc bind set pci/0000:00:00.5/0 sb 0 tc $tc \
		type ingress pool $POOL_ING \
		th 3000
done

The above command sets BUF_Q_RSRV_I(port 0, tc 0..7) to 3000 bytes.
The sharing watermarks are again reconfigured with 24000 bytes less.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is meant to be a gentle introduction into the world of watermarks
on ocelot. The code is placed in ocelot_devlink.c because it will be
integrated with devlink, even if it isn't right now.

My first step was intended to be to replicate the default configuration
of the congestion watermarks programatically, since they are now going
to be tuned by the user.

But after studying and understanding through trial and error how they
work, I now believe that the configuration used out of reset does not do
justice to the word "reservation", since the sum of all reservations
exceeds the total amount of resources (otherwise said, all reservations
cannot be fulfilled at the same time, which means that, contrary to the
reference manual, they don't guarantee anything).

As an example, here's a dump of the reservation watermarks for frame
buffers, for port 0 (for brevity, the ports 1-6 were omitted, but they
have the same configuration):

BUF_Q_RSRV_I(port 0, prio 0) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 1) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 2) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 3) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 4) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 5) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 6) = max 3000 bytes
BUF_Q_RSRV_I(port 0, prio 7) = max 3000 bytes

Otherwise said, every port-tc has an ingress reservation of 3000 bytes,
and there are 7 ports in VSC9959 Felix (6 user ports and 1 CPU port).
Concentrating only on the ingress reservations, there are, in total,
8 [traffic classes] x 7 [ports] x 3000 [bytes] = 168,000 bytes of memory
reserved on ingress.
But, surprise, Felix only has 128 KB of packet buffer in total...
A similar thing happens with Seville, which has a larger packet buffer,
but also more ports, and the default configuration is also overcommitted.

This patch disables the (apparently) bogus reservations and moves all
resources to the shared area. This way, real reservations can be set up
by the user, using devlink-sb.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add devlink integration into the mscc_ocelot switchdev driver. All
physical ports (i.e. the unused ones as well) except the CPU port module
at ocelot->num_phys_ports are registered with devlink, and that requires
keeping the devlink_port structure outside struct ocelot_port_private,
since the latter has a 1:1 mapping with a struct net_device (which does
not exist for unused ports).

Since we use devlink_port_type_eth_set to link the devlink port to the
net_device, we can as well remove the .ndo_get_phys_port_name and
.ndo_get_port_parent_id implementations, since devlink takes care of
retrieving the port name and number automatically, once
.ndo_get_devlink_port is implemented.

Note that the felix DSA driver is already integrated with devlink by
default, since that is a thing that the DSA core takes care of. This is
the reason why these devlink stubs were put in ocelot_net.c and not in
the common library. It is also the reason why ocelot::devlink is a
pointer and not a full structure embedded inside struct ocelot: because
the mscc_ocelot driver allocates that by itself (as the container of
struct ocelot, in fact), but in the case of felix, it is DSA who
allocates the devlink, and felix just propagates the pointer towards
struct ocelot.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is a leftover of commit 69df578c ("net: mscc: ocelot: eliminate
confusion between CPU and NPI port") which renamed that function.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We should be moving anything that isn't DSA-specific or SoC-specific out
of the felix DSA driver, and into the common mscc_ocelot switch library.

The number of traffic classes is one of the aspects that is common
between all ocelot switches, so it belongs in the library.

This patch also makes seville use 8 TX queues, and therefore enables
prioritization via the QOS_CLASS field in the NPI injection header.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In general it is desirable that cleanup is the reverse process of setup.
In this case I am not seeing any particular issue, but with the
introduction of devlink-sb for felix, a non-obvious decision had to be
made as to where to put its cleanup method. When there's a convention in
place, that decision becomes obvious.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The devlink function pointer names are super long, and they would break
the alignment. So reindent the existing ops now by adding one tab.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Switches that care about QoS might have hardware support for reserving
buffer pools for individual ports or traffic classes, and configuring
their sizes and thresholds. Through devlink-sb (shared buffers), this is
all configurable, as well as their occupancy being viewable.

Add the plumbing in DSA for these operations.

Individual drivers still need to call devlink_sb_register() with the
shared buffers they want to expose. A helper was not created in DSA for
this purpose (unlike, say, dsa_devlink_params_register), since in my
opinion it does not bring any benefit over plainly calling
devlink_sb_register() directly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We'll need to read back the watermark thresholds and occupancy from
hardware (for devlink-sb integration), not only to write them as we did
so far in ocelot_port_set_maxlen. So introduce 2 new functions in struct
ocelot_ops, similar to wm_enc, and implement them for the 3 supported
mscc_ocelot switches.

Remove the INUSE and MAXUSE unpacking helpers for the QSYS_RES_STAT
register, because that doesn't scale with the number of switches that
mscc_ocelot supports now. They have different bit widths for the
watermarks, and we need function pointers to abstract that difference
away.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of reading these values from the reference manual and writing
them down into the driver, it appears that the hardware gives us the
option of detecting them dynamically.

The number of frame references corresponds to what the reference manual
notes, however it seems that the frame buffers are reported as slightly
less than the books would indicate. On VSC9959 (Felix), the books say it
should have 128KB of packet buffer, but the registers indicate only
129840 bytes (126.79 KB). Also, the unit of measurement for FREECNT from
the documentation of all these devices is incorrect (taken from an older
generation). This was confirmed by Younes Leroul from Microchip support.

Not having anything better to do with these values at the moment* (this
will change soon), let's just print them.

*The frame buffer size is, in fact, used to calculate the tail dropping
watermarks.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2021-01-16

1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support,
   that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman.

2) Add support for using kernel module global variables (__ksym externs in BPF
   programs) retrieved via module's BTF, from Andrii Nakryiko.

3) Generalize BPF stackmap's buildid retrieval and add support to have buildid
   stored in mmap2 event for perf, from Jiri Olsa.

4) Various fixes for cross-building BPF sefltests out-of-tree which then will
   unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker.

5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann.

6) Clean up driver's XDP buffer init and split into two helpers to init per-
   descriptor and non-changing fields during processing, from Lorenzo Bianconi.

7) Minor misc improvements to libbpf & bpftool, from Ian Rogers.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
  perf: Add build id data in mmap2 event
  bpf: Add size arg to build_id_parse function
  bpf: Move stack_map_get_build_id into lib
  bpf: Document new atomic instructions
  bpf: Add tests for new BPF atomic operations
  bpf: Add bitwise atomic instructions
  bpf: Pull out a macro for interpreting atomic ALU operations
  bpf: Add instructions for atomic_[cmp]xchg
  bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
  bpf: Move BPF_STX reserved field check into BPF_STX verifier code
  bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
  bpf: x86: Factor out a lookup table for some ALU opcodes
  bpf: x86: Factor out emission of REX byte
  bpf: x86: Factor out emission of ModR/M for *(reg + off)
  tools/bpftool: Add -Wall when building BPF programs
  bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
  selftests/bpf: Install btf_dump test cases
  selftests/bpf: Fix installation of urandom_read
  selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
  selftests/bpf: Fix out-of-tree build
  ...
====================

Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Defining DEBUG should only be done in development.
So remove DEBUG.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20210115153128.131026-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Defining DEBUG should only be done in development.
So remove DEBUG.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210114212917.48174-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Defining DEBUG should only be done in development.
So remove DEBUG.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210113215603.1721958-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As explained in commit 54a0ed0d ("net: dsa: provide an option for
drivers to always receive bridge VLANs"), DSA has historically been
skipping VLAN switchdev operations when the bridge wasn't in
vlan_filtering mode, but the reason why it was doing that has never been
clear. So the configure_vlan_while_not_filtering option is there merely
to preserve functionality for existing drivers. It isn't some behavior
that drivers should opt into. Ideally, when all drivers leave this flag
set, we can delete the dsa_port_skip_vlan_configuration() function.

New drivers always seem to omit setting this flag, for some reason. So
let's reverse the logic: the DSA core sets it by default to true before
the .setup() callback, and legacy drivers can turn it off. This way, new
drivers get the new behavior by default, unless they explicitly set the
flag to false, which is more obvious during review.

Remove the assignment from drivers which were setting it to true, and
add the assignment to false for the drivers that didn't previously have
it. This way, it should be easier to see how many we have left.

The following drivers: lan9303, mv88e6060 were skipped from setting this
flag to false, because they didn't have any VLAN offload ops in the
first place.

The Broadcom Starfighter 2 driver calls the common b53_switch_alloc and
therefore also inherits the configure_vlan_while_not_filtering=true
behavior.

Also, print a message through netlink extack every time a VLAN has been
skipped. This is mildly annoying on purpose, so that (a) it is at least
clear that VLANs are being skipped - the legacy behavior in itself is
confusing, and the extack should be much more difficult to miss, unlike
kernel logs - and (b) people have one more incentive to convert to the
new behavior.

No behavior change except for the added prints is intended at this time.

$ ip link add br0 type bridge vlan_filtering 0
$ ip link set sw0p2 master br0
[   60.315148] br0: port 1(sw0p2) entered blocking state
[   60.320350] br0: port 1(sw0p2) entered disabled state
[   60.327839] device sw0p2 entered promiscuous mode
[   60.334905] br0: port 1(sw0p2) entered blocking state
[   60.340142] br0: port 1(sw0p2) entered forwarding state
Warning: dsa_core: skipping configuration of VLAN. # This was the pvid
$ bridge vlan add dev sw0p2 vid 100
Warning: dsa_core: skipping configuration of VLAN.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210115231919.43834-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'netxen_get_minidump_template()' GFP_KERNEL can
be used because its only caller, ' netxen_setup_minidump(()' already uses
it and no lock is acquired in the between.

When memory is allocated in other function in 'netxen_nic_ctx.c' GFP_KERNEL
can be used because the call chain already uses GFP_KERNEL and no lock is
taken in the between.
The call chain is:
  netxen_nic_attach()
    --> netxen_alloc_sw_resources()          : already uses GFP_KERNEL
    --> netxen_alloc_hw_resources()
      --> nx_fw_cmd_create_rx_ctx()
      --> nx_fw_cmd_create_tx_ctx()

When memory is allocated in 'netxen_init_dummy_dma()' GFP_KERNEL can be
used because its only call chain already uses it and no lock is acquired in
the between.
The call chain is:
  --> netxen_start_firmware
    --> netxen_request_firmware()
      --> request_firmware()
        --> _request_firmware(()
          --> fw_get_filesystem_firmware()
            --> __getname()                  : already uses GFP_KERNEL
    --> netxen_init_dummy_dma()

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20210113202519.487672-1-christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tobias Waldekranz says:

====================
net: dsa: mv88e6xxx: LAG fixes

The kernel test robot kindly pointed out that Global 2 support in
mv88e6xxx is optional.

This also made me realize that we should verify that the hardware
actually supports LAG offloading before trying to configure it.
====================

Link: https://lore.kernel.org/r/20210115125259.22542-1-tobias@waldekranz.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There are chips that do have Global 2 registers, and therefore trunk
mapping/mask tables are not available. Refuse the offload as early as
possible on those devices.

Fixes: 57e661aa ("net: dsa: mv88e6xxx: Link aggregation support")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Support for Global 2 registers is build-time optional. In the case
where it was not enabled the build would fail as no "dummy"
implementation of these functions was available.

Fixes: 57e661aa ("net: dsa: mv88e6xxx: Link aggregation support")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

George McCollister says:

====================
Arrow SpeedChips XRS700x DSA Driver

This series adds a DSA driver for the Arrow SpeedChips XRS 7000 series
of HSR/PRP gigabit switch chips.

The chips use Flexibilis IP.
More information can be found here:
 https://www.flexibilis.com/products/speedchips-xrs7000/

The switches have up to three RGMII ports and one MII port and are
managed via mdio or i2c. They use a one byte trailing tag to identify
the switch port when in managed mode so I've added a tag driver which
implements this.

This series contains minimal DSA functionality which may be built upon
in future patches. The ultimate goal is to add HSR and PRP
(IEC 62439-3 Clause 5 & 4) offloading with integration into net/hsr.
====================

Link: https://lore.kernel.org/r/20210114195734.55313-1-george.mccollister@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add documentation and an example for Arrow SpeedChips XRS7000 Series
single chip Ethernet switches.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a driver with initial support for the Arrow SpeedChips XRS7000
series of gigabit Ethernet switch chips which are typically used in
critical networking applications.

The switches have up to three RGMII ports and one RMII port.
Management to the switches can be performed over i2c or mdio.

Support for advanced features such as PTP and
HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and
may be added at a later date.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>