- 08 Nov, 2018 5 commits
-
-
Nishad Kamdar authored
Use the gpiod interface instead of the deprecated old non-descriptor interface in olpc_dcon_xo_1.c. Signed-off-by:
Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Brady authored
When the BCM2835 audio output is used, userspace sees a jitter up to 10ms in the audio position, aka "delay" -- the number of frames that must be output before a new frame would be played. Make this a bit nicer for userspace by interpolating the position using the CPU clock. The overhead is small -- an extra ktime_get() every time a GPU message is sent -- and another call and a few calculations whenever the delay is sought from userland. At 48,000 frames per second, i.e. approximately 20 microseconds per frame, it would take a clock inaccuracy of 20 microseconds in 10 milliseconds -- 2,000 parts per million -- to result in an inaccurate estimate, whereas crystal- or resonator-based clocks typically have an inaccuracy of 10s to 100s of parts per million. Signed-off-by:
Mike Brady <mikebrady@eircom.net> Signed-off-by:
-
Adham Abozaeid authored
handle_cfg_param() receives a bit map that describes what to be changed. Some of these bits flags aren't referred to from elsewhere and can be removed. Signed-off-by:
Adham Abozaeid <adham.abozaeid@microchip.com> Signed-off-by:
-
Gao Xiang authored
LZ4_decompress_safe_partial() can now decode exactly the nb of bytes requested after the upstreamed commit 2209fda3 ("lib/lz4: update LZ4 decompressor module"), remove the erofs hacked lz4 decompression code. A more cleaned compressor wrapper will be introduced in the subsequent patches in order to prepare for supporting multiple compression algorithms. Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
Colin Ian King authored
The frame.flags & FLAG_B_FRAME is promoted to a long unsigned because of the use of the BIT() macro when defining FLAG_B_FRAME and causing a build warning. Fix this by using the %lu format specifer. Cleans up warning: drivers/staging/media/tegra-vde/tegra-vde.c:267:5: warning: format specifies type 'int' but the argument has type 'unsigned long' [-Wformat] Fixes: 42e764d0 ("staging: tegravde: replace bit assignment with macro") Cc: Ioannis Valasakis <code@wizofe.uk> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 07 Nov, 2018 35 commits
-
-
Cristian Sicilia authored
The macro SET_RATE_ID is a definition in function and undefined at end of function. Make it as inline avoid the arg reuse for macro, the name is changed in _rtl_rate_id, following the same function pattern in the file. Signed-off-by:
Cristian Sicilia <sicilia.cristian@gmail.com> Signed-off-by:
-
Yangtao Li authored
Correct spelling mistakes of "Calculate" Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
Yangtao Li authored
ture->true Signed-off-by:
-
Yangtao Li authored
ture->true Signed-off-by:
-
Ian Abbott authored
The `insn_write` handler for the AO subdevice (`labpc_ao_insn_write()`) currently ignores `insn->n` (the number of samples to write) and assumes a single sample is to be written. But `insn->n` could be 0, meaning no samples should be written, in which case `data[0]` is invalid. Follow the usual Comedi guidelines and change `labpc_ao_insn_write()` to write the specified number of samples. This fixes the assumption that `data[0]` is valid. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
The `insn_write` handler for the AO subdevice (`cb_pcidda_ao_insn_write()`) currently ignores `insn->n` (the number of samples to write) and assumes a single sample is to be written. But `insn->n` could be 0, meaning no samples should be written, in which case `data[0]` is invalid. Follow the usual Comedi guidelines and change `cb_pcidda_ao_insn_write()` to write the specified number of samples. This fixes the assumption that `data[0]` is valid. Signed-off-by:
-
Ian Abbott authored
The `insn_read` handler for the EEPROM subdevice (`apci3501_eeprom_insn_read()`) currently ignores `insn->n` (the number of samples to be read) and assumes a single sample is to be read. But `insn->n` could be 0, meaning no samples should be read, in which case `data[0]` ought not to be written. (The comedi core at least ensures that `data[0]` exists, but we should not rely on that.) Following the usual Comedi guidelines and interpret `insn->n` as the number of samples to be read, but only read the EEPROM location once and make `insn->n` copies, as we don't expect the contents of the EEPROM location to change between readings. Signed-off-by:
-
Ian Abbott authored
The contents of the Comedi configuration instruction `INSN_CONFIG_TIMER_1` instruction are not very well defined, but the one driver that uses it (the "cb_pcidas64" driver for the PCI-DAS4020/12 card) assumes its `insn->n` is 5. Add a check in `check_insn_config_length()` to verify that `insn->n` is correct for this configuration instruction. Signed-off-by:
-
Ian Abbott authored
The `insn_read` handler for the EEPROM subdevice (`eeprom_insn_read()`) currently ignores `insn->n` (the number of samples to be read) and assumes a single sample is to be read. But `insn->n` could be 0, meaning no samples should be read, in which case `data[0]` ought not to be written. (The comedi core at least ensures that `data[0]` exists, but we should not rely on that.) Follow the usual Comedi guidelines and interpret `insn->n` as the number of samples to be read, but only read the EEPROM location once and make `insn->n` copies, as we don't expect the contents of the EEPROM location to change between readings. Signed-off-by:
-
Ian Abbott authored
The `insn_write` handler for the AO subdevice (`ao_winsn()` currently ignores `insn->n` (the number of samples to write) and assumes a single sample is to be written. But `insn->n` could be 0, meaning no samples should be written, in which case `data[0]` is invalid. Follow the usual Comedi guidelines and change `ao_winsn()` to write the specified number of samples. This fixes the assumption that `data[0]` is valid. Signed-off-by:
-
Hans de Goede authored
Use DRM_FB_HELPER_DEFAULT_OPS rather then open-coding it. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
This is a leftover from when the driver was out of tree and also build against older kernels. Signed-off-by:
-
Hans de Goede authored
Add myself as MODULE_AUTHOR. Signed-off-by:
-
Hans de Goede authored
Add #ifdef CONFIG_PM_SLEEP around the suspend/hibernate functions. Remove unnecessary #ifdef CONFIG_COMPAT, the .compat_ioctl member is always available and if CONFIG_COMPAT is not set then drm_compat_ioctl is defined to NULL. Signed-off-by:
-
Hans de Goede authored
Use PCI_DEVICE() for our pci_id table and also simplify the terminating entry tio just "{ }". Signed-off-by: -
Hans de Goede authored
Stop adding -Iinclude/drm to the CFLAGS and stop using the obsolete "include-all" drm/drmP.h header. Signed-off-by:
-
Michael Straube authored
Cleanup a line over 80 characters in rtw_hal_xmit() by using if(x) instead of if(x == true). Also clears a missing spaces around '|' checkpatch issue. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Signed-off-by:
-
Michael Straube authored
The function rtw_hal_xmit() returns true or false. Change the return type from s32 to bool. Signed-off-by:
-
Michael Straube authored
The function rtl8188eu_xmitframe_complete() returns true or false. Change the return type from s32 to bool. Signed-off-by:
-
Michael Straube authored
The field enable of struct recv_reorder_ctrl is only used for boolean values, so change the type from u8 to bool. Signed-off-by:
-
Michael Straube authored
The field accept_addba_req of struct mlme_ext_info has type bool. Use the value of accept_addba_req directly instead of the ternary operator in an asignment. Signed-off-by:
-
Michael Straube authored
The variable is_cck_rate is used for boolean values, so change the type from u8 to bool. The initializations to zero and use of ternary operator in the assignments are unnecessary, remove them as well. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Michael Straube authored
Rename the variable isCCKrate to avoid CamelCase. isCCKrate -> is_cck_rate Signed-off-by:
-
Michael Straube authored
Rename the variable Max_spatial_stream to avoid CamelCase. Max_spatial_stream -> max_spatial_stream Signed-off-by:
-
Michael Straube authored
Use clamp() to simplify code in odm_evm_db_to_percentage(). Signed-off-by:
-
Nicolas Saenz Julienne authored
The following tasks were completed or not the right solution: 1/2- Not the proper solution, we should register a platform device in vchiq the same way it's done with bcm2835-camera as commented here: https://lkml.org/lkml/2018/10/16/1131 2/3- Fixed by Takashi Iwai here: https://lkml.org/lkml/2018/9/4/587 Also, adds a new task as per mailing list conversation. Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Nicolas Saenz Julienne authored
It was called bcm2835_alsa0_driver, that "0" didn't mean much. Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nicolas Saenz Julienne authored
There will only be one probe function, there is no use for appendig "_dt" the end of the name. Signed-off-by:
-
Nicolas Saenz Julienne authored
In this case explicitly naming the union doesn't help overall code comprehension and clutters it. Signed-off-by:
-
Nicolas Saenz Julienne authored
When it comes to declaring variables it's preferred, when possible, to use an inverted tree organization scheme. Also, removes some comments that were useless. Signed-off-by:
-
Nicolas Saenz Julienne authored
The memory is being allocated with devres_alloc(), wich ultimately uses __GFP_ZERO to call kmalloc. We don't need to zero the memory area again in bcm2835-audio. Signed-off-by:
-
Nicolas Saenz Julienne authored
The device communicates with the audio core using FOURCC codes. The driver was generating them using different macros/expressions. We now use the same macro to create them and centralize all the definitions. Signed-off-by:
-
Cristian Sicilia authored
This patch fixes two line ending with parenthesis, which did not conform to the linux kernel coding style. Signed-off-by:
-
Rohit Sarkar authored
"Exiting" instead of "Exitting" Signed-off-by:
Rohit Sarkar <rohitsarkar5398@gmail.com> Signed-off-by:
-
Laís Pessine do Carmo authored
Add spaces around '+' to correct the following checkpath.pl warnings: WARNING: line over 80 characters + write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4))); WARNING: line over 80 characters + memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain); Signed-off-by:
Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by:
-
