Remove separate handling for vdd-buck regulator supply which is not
required. The vdd-buck regulator supply enabled using bulk enable.

Add the error handling in wcd937x_probe() and disable the regulators in
error case.
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/linux-sound/834d31cc-f4bc-4db7-a25b-f9869e550eb6@wanadoo.fr/Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://patch.msgid.link/20240704081723.3394153-4-quic_mohs@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the string compare with widget name in MIC BIAS settings, instead
of string compare use the MIC BIAS id's.
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Closes: https://lore.kernel.org/linux-sound/ba911ebd-aef5-46af-ace1-84d13bee6876@linaro.org/Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://patch.msgid.link/20240704081723.3394153-3-quic_mohs@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix the unbalanced pm_runtime_enable! in wcd937x-sdw soundwire slave.

Fixes: c99a515f ("ASoC: codecs: wcd937x-sdw: add SoundWire driver")
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://patch.msgid.link/20240704081723.3394153-2-quic_mohs@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Rayyan Ansari <rayyan.ansari@linaro.org>:

These patches convert the remaining plain text bindings for Qualcomm
sound drivers to dt schema, so device trees can be validated against
them.

Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

Commit series that makes some small improvements to code and the
kernel log messages.

Remove the bclk int from the private structure and pass it into
the set_bclk function.
Signed-off-by: Paul Handrigan <paulha@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710160416.2617173-2-paulha@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Calculate the proper bclk rate using the number of tdm slots
and the width of the tdm data.

Fixes: 2884c291 ("ASoC: cs530x: Support for cs530x ADCs")
Signed-off-by: Paul Handrigan <paulha@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710160416.2617173-1-paulha@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the Cirrus Logic CS4270 audio CODEC bindings to DT schema. Add
missing va-supply, vd-supply and vlc-supply properties, because they
are already being used in the DTS and the driver for this device.

Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709184231.125207-1-animeshagarwal28@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Rename the confusingly named struct member fw_ver to wmfw_ver. It
contains the wmfw format version of the loaded wmfw file.

This commit also contains an update to wm_adsp for the new name.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-5-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Change the log message of the wmfw format version to include
the file name, and change the message to say "format" instead
of "Firmware version". Merge this with the message that logs
the timestamp.

The wmfw format version is information that is useful to have
logged because the behaviour of firmware controls depends on
the wmfw format. So "unexpected" behaviour could be caused by
having expectations based on one format of wmfw when a
different format has been loaded.

But the original message was confusing. It reported the file
format version but didn't actually log the name of the file it
referred to. It also called it "Firmware version", which is
confusing when a later message also logs a firmware version
that is the version of the actual firmware within the wmfw.

The logging of the firmware timestamp has been merged into this.
That was originally a dbg-only message, but as we are already
logging a line of info, we might as well add a few extra
characters to log the timestamp. The timestamp is now logged
in hexadecimal - it's not particularly useful as a decimal
value.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-4-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The wmfw_filename and bin_filename strings passed into cs_dsp_power_up()
and cs_dsp_adsp1_power_up() should be const char *.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-3-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Don't allocate a temporary buffer to hold a NUL-terminated copy
of the NAME/INFO string from the wmfw/bin. It can be printed
directly to the log. Also limit the maximum number of characters
that will be logged from this string.

The NAME/INFO blocks in the firmware files are an array of
characters with a length, not a NUL-terminated C string. The
original code allocated a temporary buffer to make a
NUL-terminated copy of the string and then passed that to
dev_info(). There's no need for this: printf formatting can
use "%.*s" to print a character array of a given length.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-2-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove old txt bindings and add apq8096 soundcard entry to existing
dt schema.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710113833.39859-4-rayyan.ansari@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the Qualcomm MSM8916 WCD Digital Audio Codec bindings from text
to yaml dt schema format.
Make bindings complete by adding #sound-dai-cells.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710113833.39859-2-rayyan.ansari@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate memory, which is being freed at end of the scope, with
scoped/cleanup.h to reduce number of error paths and make code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701171917.596173-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate memory, which is being freed at end of the scope, with
scoped/cleanup.h to reduce number of error paths and make code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701171917.596173-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20240709030921.585740-1-nichen@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

Rename the tas2781_reset as tasdevice_reset in case of misunderstanding.
RESET register for both tas2563 and tas2781 is same and the use of reset
pin is also same.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240709043342.946-1-shenghao-ding@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>:

This is a series of patches aiming to make the machine driver
`fsl-asoc-card` compatible with S/PDIF controllers on imx boards.  The
main goal is to allow the use of S/PDIF controllers with ASRC modules.

The `imx-spdif` machine driver already has specific support for S/PDIF
controllers but doesn't support using an ASRC with it. However, the
`fsl-asoc-card` machine driver has the necessary code to create a sound
card which can use an ASRC module.
It is then possible to extend the support for S/PDIF audio cards by
merging the `imx-spdif` driver into `fsl-asoc-card`.

The first three patches adapt the `fsl-asoc-card` driver to support
multiple codec use cases.
The driver can get 2 codec phandles from the device tree, and
codec-related variables are doubled.
`for_each_codecs` macros are also used when possible to ease adding
other multi-codec use cases in the future.
It makes possible to use the two S/PDIF dummy codec drivers
`spdif_receiver` and `spdif_transmitter` instead of `snd-soc-dummy`,
which was used in `imx-spdif`.

The fourth patch merges the S/PDIF support from `imx-spdif` to
`fsl-asoc-card`.
`fsl-asoc-card` offers the same functionalities as `imx-spdif` did, but
this merge also extends the S/PDIF support with the possibility of using
an ASRC.
Compatible "fsl,imx-audio-spdif" is kept, but `fsl-asoc-card` uses
different DT properties compared to `imx-spdif`:
* The "spdif-controller" property from `imx-spdif` is named "audio-cpu"
  in `fsl-asoc-card`.
* `fsl-asoc-card` uses codecs explicitly declared in DT with
  "audio-codec". With an S/PDIF, codec drivers `spdif_transmitter` and
  `spdif_receiver` should be used. Driver `imx-spdif` used instead the
  dummy codec and a pair of boolean properties, "spdif-in" and
  "spdif-out".
Backward compatibility is therefore implemented in `fsl-asoc-card`.
However, it is recommended to use the new properties when needed.
Especially, declaring and using S/PDIF transmitter and/or receiver nodes
is better than using the dummy codec.

The last three patches update the device tree bindings of
`fsl-asoc-card` and update all in-tree device trees to use the
`fsl-asoc-card` properties.
Note that as the old properties are still supported:
* previous versions of in-tree device trees are still supported.
* out-of-tree device trees are still supported.

This series of patches was successfully built for arm64 and x86 on top
of the latest "for-next" branch of the ASoC git tree on the 26th of June
2024.
These modifications have also been tested on an i.MX8MN evaluation board
with a linux kernel RT v6.1.26-rt8.

Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:

Allocate the memory with scoped/cleanup.h to reduce error handling
(simpler error paths) and make the code a bit smaller.

The S/PDIF audio card support with compatible "fsl,imx-audio-spdif"
was merged from imx-spdif into the fsl-asoc-card driver.
It makes possible to use an S/PDIF with an ASRC.

This merge introduces new DT bindings to use with compatible
"fsl,imx-audio-spdif" to follow the way fsl-asoc-card works:
* the "spdif-controller" property from imx-spdif is named "audio-cpu"
  in fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
  with "audio-codec".
  With an SPDIF, codec drivers spdif_transmitter and
  spdif_receiver should be used.
  Driver imx-spdif used instead the dummy codec and a pair of
  boolean properties, "spdif-in" and "spdif-out".

In an upcoming commit, in-tree DTs will be modified to follow these new
properties:
* Property "spdif-controller" will be renamed "audio-cpu".
* spdif_transmitter and spdif_receiver nodes will be declared
  and linked to the fsl-asoc-card node with the property "audio-codec".

To keep backward compatibility with other DTs, support for
"spdif-controller", "spdif-in" and "spdif-out" properties is kept.
However, it is recommended to use the new properties if possible.
It is better to declare transmitter and/or receiver
in DT than using the dummy codec.

DTs using compatible "fsl,imx-audio-spdif" are still supported, and
fsl-asoc-card will behave the same as imx-spdif for these DTs.
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240627083104.123357-6-elinor.montmasson@savoirfairelinux.comSigned-off-by: Mark Brown <broonie@kernel.org>

The imx-spdif machine driver creates audio card to directly use an
S/PDIF device. However, it doesn't support interacting with an ASRC.
fsl-asoc-card already has the support to create audio card which can
use the ASRC.

Merge the S/PDIF support from imx-spdif into driver fsl-asoc-card
to extend the support of S/PDIF audio card with the use of ASRC devices.

fsl-asoc-card uses slightly different DT properties than imx-spdif:
* the "spdif-controller" property from imx-spdif is named "audio-cpu" in
  fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
  with "audio-codec".
  With an SPDIF, codec drivers spdif_transmitter and
  spdif_receiver should be used.
  Driver imx-spdif used instead the dummy codec and a pair of
  boolean properties, "spdif-in" and "spdif-out".

To keep backward compatibility, support for "spdif-controller",
"spdif-in" and "spdif-out" is also added to fsl-asoc-card.
However, it is recommended to use the new properties if possible.
It is better to declare transmitter and/or receiver in DT
than using the dummy codec.

DTs using compatible "fsl,imx-audio-spdif" are still compatible, and
fsl-asoc-card will behave the same as imx-spdif
for these DTs.
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240627083104.123357-5-elinor.montmasson@savoirfairelinux.comSigned-off-by: Mark Brown <broonie@kernel.org>

Adapt the driver to work with configurations using two codecs or more.
Modify fsl_asoc_card_probe() to handle use cases where 2 codecs are
given in the device tree.
This will be needed to add support for the SPDIF.

Use cases using one codec will ignore any given codecs other than the
first.
Co-developed-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240627083104.123357-4-elinor.montmasson@savoirfairelinux.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a second dai link component for codecs that will be used for use
cases with 2 codecs.
It is needed for future integration of the SPDIF support, which will
use spdif_receiver and spdif_transmitter drivers.

To prevent deferring in use cases using only one codec, also set
by default the number of codecs to 1 for the relevant dai links.
Co-developed-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240627083104.123357-3-elinor.montmasson@savoirfairelinux.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for dai links using multiple codecs for multi-codec
use cases.
Co-developed-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240627083104.123357-2-elinor.montmasson@savoirfairelinux.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use strnlen() instead of strlen() on the algorithm and coefficient name
string arrays in V1 wmfw files.

In V1 wmfw files the name is a NUL-terminated string in a fixed-size
array. cs_dsp should protect against overrunning the array if the NUL
terminator is missing.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240708144855.385332-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use get_unaligned_be16 instead of be16_to_cpup and get_unaligned_be32
instead of be32_to_cpup for potentially broken alignment.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240707083011.98-1-shenghao-ding@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h in
snd_soc_dai_link_event_pre_pmu() to reduce error handling (less error
paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-11-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h in dapm_cnew_widget() to
reduce error handling (less error paths) and make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-10-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-9-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h, instead of devm interface, to
make the code more obvious that memory is not used outside this scope.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-8-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h, instead of devm interface, to
make the code more obvious that memory is not used outside this scope.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-7-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h, instead of devm interface, to
make the code more obvious that memory is not used outside this scope.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-6-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-5-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-4-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-3-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h in audio_iio_aux_probe() to
reduce error handling (less error paths) and make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-2-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate the memory with scoped/cleanup.h in audio_iio_aux_add_dapms()
to reduce error handling (less error paths) and make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-1-71219dfd0aef@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Adding name-prefix for each audio controls is a redundant, because
name-prefix will be automatically added behind the control name when
creating a new control.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240705064846.1723-1-shenghao-ding@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Herve Codina <herve.codina@bootlin.com>:

The qmc_audio driver supports only audio in interleaved mode.
Non-interleaved mode can be easily supported using several QMC channel
per DAI. In that case, data related to ch0 are sent to (received from)
the first QMC channel, data related to ch1 use the next QMC channel and
so on up to the last channel.

In terms of constraints and settings, the interleaved and
non-interleaved modes are slightly different.

In interleaved mode:
  - The sample size should fit in the number of time-slots available for
    the QMC channel.
  - The number of audio channels should fit in the number of time-slots
    (taking into account the sample size) available for the QMC channel.

In non-interleaved mode:
  - The number of audio channels is the number of available QMC
    channels.
  - Each QMC channel should have the same number of time-slots.
  - The sample size equals the number of time-slots of one QMC channel.

This series add support for the non-interleaved mode in the qmc_audio
driver and is composed of the following parts:
  - Patches 1 and 2: Fix some issues in the qmc_audio
  - Patches 3 to 6: Prepare qmc_audio for the non-interleaved mode
  - Patches 7 and 8: Extend the QMC driver API
  - Patches 9 and 10: The support for non-interleaved mode itself

Compared to the previous iteration, this v2 series mainly improves
qmc_audio_access_is_interleaved().