bpf_iter requires the kernel BTF to be generated with
pahole >= 1.16, since otherwise the function definitions
that the iterator attaches to are not included.
This failure mode is indistiguishable from trying to attach
to an iterator that really doesn't exist.

Since it's really easy to miss this requirement, bump the
pahole version check used at build time to at least 1.16.

Fixes: 15d83c4d ("bpf: Allow loading of a bpf_iter program")
Suggested-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200608094257.47366-1-lmb@cloudflare.com

We can end up modifying the sockhash bucket list from two CPUs when a
sockhash is being destroyed (sock_hash_free) on one CPU, while a socket
that is in the sockhash is unlinking itself from it on another CPU
it (sock_hash_delete_from_link).

This results in accessing a list element that is in an undefined state as
reported by KASAN:

| ==================================================================
| BUG: KASAN: wild-memory-access in sock_hash_free+0x13c/0x280
| Write of size 8 at addr dead000000000122 by task kworker/2:1/95
|
| CPU: 2 PID: 95 Comm: kworker/2:1 Not tainted 5.7.0-rc7-02961-ge22c35ab0038-dirty #691
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
|  dump_stack+0x97/0xe0
|  ? sock_hash_free+0x13c/0x280
|  __kasan_report.cold+0x5/0x40
|  ? mark_lock+0xbc1/0xc00
|  ? sock_hash_free+0x13c/0x280
|  kasan_report+0x38/0x50
|  ? sock_hash_free+0x152/0x280
|  sock_hash_free+0x13c/0x280
|  bpf_map_free_deferred+0xb2/0xd0
|  ? bpf_map_charge_finish+0x50/0x50
|  ? rcu_read_lock_sched_held+0x81/0xb0
|  ? rcu_read_lock_bh_held+0x90/0x90
|  process_one_work+0x59a/0xac0
|  ? lock_release+0x3b0/0x3b0
|  ? pwq_dec_nr_in_flight+0x110/0x110
|  ? rwlock_bug.part.0+0x60/0x60
|  worker_thread+0x7a/0x680
|  ? _raw_spin_unlock_irqrestore+0x4c/0x60
|  kthread+0x1cc/0x220
|  ? process_one_work+0xac0/0xac0
|  ? kthread_create_on_node+0xa0/0xa0
|  ret_from_fork+0x24/0x30
| ==================================================================

Fix it by reintroducing spin-lock protected critical section around the
code that removes the elements from the bucket on sockhash free.

To do that we also need to defer processing of removed elements, until out
of atomic context so that we can unlink the socket from the map when
holding the sock lock.

Fixes: 90db6d77 ("bpf, sockmap: Remove bucket->lock from sock_{hash|map}_free")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200607205229.2389672-3-jakub@cloudflare.com

When sockhash gets destroyed while sockets are still linked to it, we will
walk the bucket lists and delete the links. However, we are not freeing the
list elements after processing them, leaking the memory.

The leak can be triggered by close()'ing a sockhash map when it still
contains sockets, and observed with kmemleak:

  unreferenced object 0xffff888116e86f00 (size 64):
    comm "race_sock_unlin", pid 223, jiffies 4294731063 (age 217.404s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      81 de e8 41 00 00 00 00 c0 69 2f 15 81 88 ff ff  ...A.....i/.....
    backtrace:
      [<00000000dd089ebb>] sock_hash_update_common+0x4ca/0x760
      [<00000000b8219bd5>] sock_hash_update_elem+0x1d2/0x200
      [<000000005e2c23de>] __do_sys_bpf+0x2046/0x2990
      [<00000000d0084618>] do_syscall_64+0xad/0x9a0
      [<000000000d96f263>] entry_SYSCALL_64_after_hwframe+0x49/0xb3

Fix it by freeing the list element when we're done with it.

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200607205229.2389672-2-jakub@cloudflare.com

When user application calls read() with MSG_PEEK flag to read data
of bpf sockmap socket, kernel panic happens at
__tcp_bpf_recvmsg+0x12c/0x350. sk_msg is not removed from ingress_msg
queue after read out under MSG_PEEK flag is set. Because it's not
judged whether sk_msg is the last msg of ingress_msg queue, the next
sk_msg may be the head of ingress_msg queue, whose memory address of
sg page is invalid. So it's necessary to add check codes to prevent
this problem.

[20759.125457] BUG: kernel NULL pointer dereference, address:
0000000000000008
[20759.132118] CPU: 53 PID: 51378 Comm: envoy Tainted: G            E
5.4.32 #1
[20759.140890] Hardware name: Inspur SA5212M4/YZMB-00370-109, BIOS
4.1.12 06/18/2017
[20759.149734] RIP: 0010:copy_page_to_iter+0xad/0x300
[20759.270877] __tcp_bpf_recvmsg+0x12c/0x350
[20759.276099] tcp_bpf_recvmsg+0x113/0x370
[20759.281137] inet_recvmsg+0x55/0xc0
[20759.285734] __sys_recvfrom+0xc8/0x130
[20759.290566] ? __audit_syscall_entry+0x103/0x130
[20759.296227] ? syscall_trace_enter+0x1d2/0x2d0
[20759.301700] ? __audit_syscall_exit+0x1e4/0x290
[20759.307235] __x64_sys_recvfrom+0x24/0x30
[20759.312226] do_syscall_64+0x55/0x1b0
[20759.316852] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: dihu <anny.hu@linux.alibaba.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200605084625.9783-1-anny.hu@linux.alibaba.com

Fix test race, in which background poll can get either 5 or 6 samples,
depending on timing of notification. Prevent this by open-coding sample
triggering and forcing notification for the very last sample only.

Also switch to using atomic increments and exchanges for more obviously
reliable counting and checking. Additionally, check expected processed sample
counters for single-threaded use cases as well.

Fixes: 9a5f25ad ("selftests/bpf: Fix sample_cnt shared between two threads")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200608003615.3549991-1-andriin@fb.com

This code returns success if the "info_aux" allocation fails but it
should return -ENOMEM.

Fixes: 8c1b6e69 ("bpf: Compare BTF types of functions arguments with actual types")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200604085436.GA943001@mwanda

A recent commit added new variables only used if CONFIG_NETDEVICES is
set. A simple fix would be to only declare these variables if the same
condition is valid but Alexei suggested an even simpler solution:

    since CONFIG_NETDEVICES doesn't change anything in .h I think the
    best is to remove #ifdef CONFIG_NETDEVICES from net/core/filter.c
    and rely on sock_bindtoindex() returning ENOPROTOOPT in the extreme
    case of oddly configured kernels.

Fixes: 70c58997 ("bpf: Allow SO_BINDTODEVICE opt in bpf_setsockopt")
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200603190347.2310320-1-matthieu.baerts@tessares.net

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

Pull comedi uaccess cleanups from Al Viro:
 "Comedi compat ioctls done saner - killing the single biggest pile of
  __get_user/__put_user outside of arch/* in the process"

* 'uaccess.comedi' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  comedi: get rid of compat_alloc_user_space() mess in COMEDI_CMD{,TEST} compat
  comedi: do_cmd_ioctl(): lift copyin/copyout into the caller
  comedi: do_cmdtest_ioctl(): lift copyin/copyout into the caller
  comedi: lift copy_from_user() into callers of __comedi_get_user_cmd()
  comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compat
  comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSN compat
  comedi: get rid of compat_alloc_user_space() mess in COMEDI_RANGEINFO compat
  comedi: get rid of compat_alloc_user_space() mess in COMEDI_CHANINFO compat
  comedi: get rid of indirection via translated_ioctl()
  comedi: move compat ioctl handling to native fops

Pull splice updates from Al Viro:
 "Christoph's assorted splice cleanups"

* 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: rename pipe_buf ->steal to ->try_steal
  fs: make the pipe_buf_operations ->confirm operation optional
  fs: make the pipe_buf_operations ->steal operation optional
  trace: remove tracing_pipe_buf_ops
  pipe: merge anon_pipe_buf*_ops
  fs: simplify do_splice_from
  fs: simplify do_splice_to

Pull kvm updates from Paolo Bonzini:
 "ARM:
   - Move the arch-specific code into arch/arm64/kvm

   - Start the post-32bit cleanup

   - Cherry-pick a few non-invasive pre-NV patches

  x86:
   - Rework of TLB flushing

   - Rework of event injection, especially with respect to nested
     virtualization

   - Nested AMD event injection facelift, building on the rework of
     generic code and fixing a lot of corner cases

   - Nested AMD live migration support

   - Optimization for TSC deadline MSR writes and IPIs

   - Various cleanups

   - Asynchronous page fault cleanups (from tglx, common topic branch
     with tip tree)

   - Interrupt-based delivery of asynchronous "page ready" events (host
     side)

   - Hyper-V MSRs and hypercalls for guest debugging

   - VMX preemption timer fixes

  s390:
   - Cleanups

  Generic:
   - switch vCPU thread wakeup from swait to rcuwait

  The other architectures, and the guest side of the asynchronous page
  fault work, will come next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
  KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
  KVM: check userspace_addr for all memslots
  KVM: selftests: update hyperv_cpuid with SynDBG tests
  x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
  x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
  x86/kvm/hyper-v: Add support for synthetic debugger interface
  x86/hyper-v: Add synthetic debugger definitions
  KVM: selftests: VMX preemption timer migration test
  KVM: nVMX: Fix VMX preemption timer migration
  x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
  KVM: x86/pmu: Support full width counting
  KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
  KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
  KVM: x86: acknowledgment mechanism for async pf page ready notifications
  KVM: x86: interrupt based APF 'page ready' event delivery
  KVM: introduce kvm_read_guest_offset_cached()
  KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
  KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
  Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
  KVM: VMX: Replace zero-length array with flexible-array
  ...

Pull hyper-v updates from Wei Liu:

 - a series from Andrea to support channel reassignment

 - a series from Vitaly to clean up Vmbus message handling

 - a series from Michael to clean up and augment hyperv-tlfs.h

 - patches from Andy to clean up GUID usage in Hyper-V code

 - a few other misc patches

* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (29 commits)
  Drivers: hv: vmbus: Resolve more races involving init_vp_index()
  Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug
  vmbus: Replace zero-length array with flexible-array
  Driver: hv: vmbus: drop a no long applicable comment
  hyper-v: Switch to use UUID types directly
  hyper-v: Replace open-coded variant of %*phN specifier
  hyper-v: Supply GUID pointer to printf() like functions
  hyper-v: Use UUID API for exporting the GUID (part 2)
  asm-generic/hyperv: Add definitions for Get/SetVpRegister hypercalls
  x86/hyperv: Split hyperv-tlfs.h into arch dependent and independent files
  x86/hyperv: Remove HV_PROCESSOR_POWER_STATE #defines
  KVM: x86: hyperv: Remove duplicate definitions of Reference TSC Page
  drivers: hv: remove redundant assignment to pointer primary_channel
  scsi: storvsc: Re-init stor_chns when a channel interrupt is re-assigned
  Drivers: hv: vmbus: Introduce the CHANNELMSG_MODIFYCHANNEL message type
  Drivers: hv: vmbus: Synchronize init_vp_index() vs. CPU hotplug
  Drivers: hv: vmbus: Remove the unused HV_LOCALIZED channel affinity logic
  PCI: hv: Prepare hv_compose_msi_msg() for the VMBus-channel-interrupt-to-vCPU reassignment functionality
  Drivers: hv: vmbus: Use a spin lock for synchronizing channel scheduling vs. channel removal
  hv_utils: Always execute the fcopy and vss callbacks in a tasklet
  ...

Pull kgdb updates from Daniel Thompson:
 "By far the biggest change in this cycle are the changes that allow
  much earlier debug of systems that are hooked up via UART by taking
  advantage of the earlycon framework to implement the kgdb I/O hooks
  before handing over to the regular polling I/O drivers once they are
  available. When discussing Doug's work we also found and fixed an
  broken raw_smp_processor_id() sequence in in_dbg_master().

  Also included are a collection of much smaller fixes and tweaks: a
  couple of tweaks to ged rid of doc gen or coccicheck warnings, future
  proof some internal calculations that made implicit power-of-2
  assumptions and eliminate some rather weird handling of magic
  environment variables in kdb"

* tag 'kgdb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Remove the misfeature 'KDBFLAGS'
  kdb: Cleanup math with KDB_CMD_HISTORY_COUNT
  serial: amba-pl011: Support kgdboc_earlycon
  serial: 8250_early: Support kgdboc_earlycon
  serial: qcom_geni_serial: Support kgdboc_earlycon
  serial: kgdboc: Allow earlycon initialization to be deferred
  Documentation: kgdboc: Document new kgdboc_earlycon parameter
  kgdb: Don't call the deinit under spinlock
  kgdboc: Disable all the early code when kgdboc is a module
  kgdboc: Add kgdboc_earlycon to support early kgdb using boot consoles
  kgdboc: Remove useless #ifdef CONFIG_KGDB_SERIAL_CONSOLE in kgdboc
  kgdb: Prevent infinite recursive entries to the debugger
  kgdb: Delay "kgdbwait" to dbg_late_init() by default
  kgdboc: Use a platform device to handle tty drivers showing up late
  Revert "kgdboc: disable the console lock when in kgdb"
  kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb
  kgdb: Return true in kgdb_nmi_poll_knock()
  kgdb: Drop malformed kernel doc comment
  kgdb: Fix spurious true from in_dbg_master()

Pull Xtensa updates from Max Filippov:

 - fix __user annotations in asm/uaccess.h

 - fix comments in entry.S

* tag 'xtensa-20200603' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: Fix spelling/grammar in comment
  xtensa: add missing __user annotations to asm/uaccess.h
  xtensa: fix error paths in __get_user_{check,size}
  xtensa: fix type conversion in __get_user_size
  xtensa: add missing __user annotations to __{get,put}_user_check

Pull parsic updates from Helge Deller:
 "Enable the sysctl file interface for panic_on_stackoverflow for
  parisc, a warning fix and a bunch of documentation updates since the
  parisc website is now at https://parisc.wiki.kernel.org"

* 'parisc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: MAINTAINERS: Update references to parisc website
  parisc: module: Update references to parisc website
  parisc: hardware: Update references to parisc website
  parisc: firmware: Update references to parisc website
  parisc: Kconfig: Update references to parisc website
  parisc: add sysctl file interface panic_on_stackoverflow
  parisc: use -fno-strict-aliasing for decompressor
  parisc: suppress error messages for 'make clean'

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for MIPSr5 and P5600 cores

 - converted Loongson PCI driver into a PCI host driver using the
   generic PCI framework

 - added emulation of CPUCFG command for Loogonson64 cpus

 - removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA

 - ioremap cleanup

 - fix for a race between two threads faulting the same page

 - various cleanups and fixes

* tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits)
  MIPS: ralink: drop ralink_clk_init for mt7621
  MIPS: ralink: bootrom: mark a function as __init to save some memory
  MIPS: Loongson64: Reorder CPUCFG model match arms
  MIPS: Expose Loongson CPUCFG availability via HWCAP
  MIPS: Loongson64: Guard against future cores without CPUCFG
  MIPS: Fix build warning about "PTR_STR" redefinition
  MIPS: Loongson64: Remove not used pci.c
  MIPS: Loongson64: Define PCI_IOBASE
  MIPS: CPU_LOONGSON2EF need software to maintain cache consistency
  MIPS: DTS: Fix build errors used with various configs
  MIPS: Loongson64: select NO_EXCEPT_FILL
  MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()
  MIPS: mm: add page valid judgement in function pte_modify
  mm/memory.c: Add memory read privilege on page fault handling
  mm/memory.c: Update local TLB if PTE entry exists
  MIPS: Do not flush tlb page when updating PTE entry
  MIPS: ingenic: Default to a generic board
  MIPS: ingenic: Add support for GCW Zero prototype
  MIPS: ingenic: DTS: Add memory info of GCW Zero
  MIPS: Loongson64: Switch to generic PCI driver
  ...

Pull ia64 build regression fix from Al Viro:
 "Fix a braino in ia64 uaccess csum changes"

* 'uaccess.csum' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix a braino in ia64 uaccess csum changes

Fixes: cc03f19c (ia64: csum_partial_copy_nocheck(): don't abuse csum_partial_copy_from_user())
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull thread updates from Christian Brauner:
 "We have been discussing using pidfds to attach to namespaces for quite
  a while and the patches have in one form or another already existed
  for about a year. But I wanted to wait to see how the general api
  would be received and adopted.

  This contains the changes to make it possible to use pidfds to attach
  to the namespaces of a process, i.e. they can be passed as the first
  argument to the setns() syscall.

  When only a single namespace type is specified the semantics are
  equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET)
  equals setns(pidfd, CLONE_NEWNET).

  However, when a pidfd is passed, multiple namespace flags can be
  specified in the second setns() argument and setns() will attach the
  caller to all the specified namespaces all at once or to none of them.

  Specifying 0 is not valid together with a pidfd. Here are just two
  obvious examples:

    setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET);
    setns(pidfd, CLONE_NEWUSER);

  Allowing to also attach subsets of namespaces supports various
  use-cases where callers setns to a subset of namespaces to retain
  privilege, perform an action and then re-attach another subset of
  namespaces.

  Apart from significantly reducing the number of syscalls needed to
  attach to all currently supported namespaces (eight "open+setns"
  sequences vs just a single "setns()"), this also allows atomic setns
  to a set of namespaces, i.e. either attaching to all namespaces
  succeeds or we fail without having changed anything.

  This is centered around a new internal struct nsset which holds all
  information necessary for a task to switch to a new set of namespaces
  atomically. Fwiw, with this change a pidfd becomes the only token
  needed to interact with a container. I'm expecting this to be
  picked-up by util-linux for nsenter rather soon.

  Associated with this change is a shiny new test-suite dedicated to
  setns() (for pidfds and nsfds alike)"

* tag 'threads-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests/pidfd: add pidfd setns tests
  nsproxy: attach to namespaces via pidfds
  nsproxy: add struct nsset

Pull scheduler updates from Ingo Molnar:
 "The changes in this cycle are:

   - Optimize the task wakeup CPU selection logic, to improve
     scalability and reduce wakeup latency spikes

   - PELT enhancements

   - CFS bandwidth handling fixes

   - Optimize the wakeup path by remove rq->wake_list and replacing it
     with ->ttwu_pending

   - Optimize IPI cross-calls by making flush_smp_call_function_queue()
     process sync callbacks first.

   - Misc fixes and enhancements"

* tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  irq_work: Define irq_work_single() on !CONFIG_IRQ_WORK too
  sched/headers: Split out open-coded prototypes into kernel/sched/smp.h
  sched: Replace rq::wake_list
  sched: Add rq::ttwu_pending
  irq_work, smp: Allow irq_work on call_single_queue
  smp: Optimize send_call_function_single_ipi()
  smp: Move irq_work_run() out of flush_smp_call_function_queue()
  smp: Optimize flush_smp_call_function_queue()
  sched: Fix smp_call_function_single_async() usage for ILB
  sched/core: Offload wakee task activation if it the wakee is descheduling
  sched/core: Optimize ttwu() spinning on p->on_cpu
  sched: Defend cfs and rt bandwidth quota against overflow
  sched/cpuacct: Fix charge cpuacct.usage_sys
  sched/fair: Replace zero-length array with flexible-array
  sched/pelt: Sync util/runnable_sum with PELT window when propagating
  sched/cpuacct: Use __this_cpu_add() instead of this_cpu_ptr()
  sched/fair: Optimize enqueue_task_fair()
  sched: Make scheduler_ipi inline
  sched: Clean up scheduler_ipi()
  sched/core: Simplify sched_init()
  ...

Pull x86 timer updates from Thomas Gleixner:
 "X86 timer specific updates:

   - Add TPAUSE based delay which allows the CPU to enter an optimized
     power state while waiting for the delay to pass. The delay is based
     on TSC cycles.

   - Add tsc_early_khz command line parameter to workaround the problem
     that overclocked CPUs can report the wrong frequency via CPUID.16h
     which causes the refined calibration to fail because the delta to
     the initial frequency value is too big. With the parameter users
     can provide an halfways accurate initial value"

* tag 'x86-timers-2020-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Add tsc_early_khz command line parameter
  x86/delay: Introduce TPAUSE delay
  x86/delay: Refactor delay_mwaitx() for TPAUSE support
  x86/delay: Preparatory code cleanup

Pull timer updates from Thomas Gleixner:
 "The truly boring timer and clocksource updates for 5.8:

   - Not a single new clocksource or clockevent driver!

   - Device tree updates for various chips

   - Fixes and improvements and cleanups all over the place"

* tag 'timers-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  dt-bindings: timer: Add renesas,em-sti bindings
  clocksource/drivers/timer-versatile: Clear OF_POPULATED flag
  clocksource: mips-gic-timer: Mark GIC timer as unstable if ref clock changes
  clocksource: mips-gic-timer: Register as sched_clock
  clocksource: dw_apb_timer_of: Fix missing clockevent timers
  clocksource: dw_apb_timer: Affiliate of-based timer with any CPU
  clocksource: dw_apb_timer: Make CPU-affiliation being optional
  dt-bindings: timer: Move snps,dw-apb-timer DT schema from rtc
  dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema
  clocksource/drivers/timer-ti-dm: Do one override clock parent in prepare()
  clocksource/drivers/timer-ti-dm: Fix spelling mistake "detectt" -> "detect"
  clocksource/drivers/timer-ti-dm: Fix warning for set but not used
  clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
  clocksource/drivers/timer-ti-32k: Add support for initializing directly
  drivers/clocksource/arm_arch_timer: Remove duplicate error message
  clocksource/drivers/arc_timer: Remove duplicate error message
  clocksource/drivers/rda: drop redundant Kconfig dependency
  clocksource/drivers/timer-ti-dm: Fix warning for set but not used
  clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
  clocksource/drivers/timer-ti-32k: Add support for initializing directly
  ...

Pull irq updates from Thomas Gleixner:
 "The generic interrupt departement provides:

   - Cleanup of the irq_domain API

   - Overhaul of the interrupt chip simulator

   - The usual pile of new interrupt chip drivers

   - Cleanups, improvements and fixes all over the place"

* tag 'irq-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  irqchip: Fix "Loongson HyperTransport Vector support" driver build on all non-MIPS platforms
  dt-bindings: interrupt-controller: Add Loongson PCH MSI
  irqchip: Add Loongson PCH MSI controller
  dt-bindings: interrupt-controller: Add Loongson PCH PIC
  irqchip: Add Loongson PCH PIC controller
  dt-bindings: interrupt-controller: Add Loongson HTVEC
  irqchip: Add Loongson HyperTransport Vector support
  genirq: Check irq_data_get_irq_chip() return value before use
  irqchip/sifive-plic: Improve boot prints for multiple PLIC instances
  irqchip/sifive-plic: Setup cpuhp once after boot CPU handler is present
  irqchip/sifive-plic: Set default irq affinity in plic_irqdomain_map()
  irqchip/gic-v2, v3: Drop extra IRQ_NOAUTOEN setting for (E)PPIs
  irqdomain: Allow software nodes for IRQ domain creation
  irqdomain: Get rid of special treatment for ACPI in __irq_domain_add()
  irqdomain: Make __irq_domain_add() less OF-dependent
  iio: dummy_evgen: Fix use after free on error in iio_dummy_evgen_create()
  irqchip/gic-v3-its: Balance initial LPI affinity across CPUs
  irqchip/gic-v3-its: Track LPI distribution on a per CPU basis
  genirq/irq_sim: Simplify the API
  irqdomain: Make irq_domain_reset_irq_data() available to  non-hierarchical users
  ...

Pull erofs updates from Gao Xiang:
 "The most interesting part is the new mount api conversion, which is
  actually a old patch already pending for several cycles. And the
  others are recent trivial cleanups here.

  Summary:

   - Convert to use the new mount apis

   - Some random cleanup patches"

* tag 'erofs-for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: suppress false positive last_block warning
  erofs: convert to use the new mount fs_context api
  erofs: code cleanup by removing ifdef macro surrounding

Pull JFS update from David Kleikamp:
 "Replace zero-length array in JFS"

* tag 'jfs-5.8' of git://github.com/kleikamp/linux-shaggy:
  jfs: Replace zero-length array with flexible-array member

Pull btrfs updates from David Sterba:
 "Highlights:

   - speedup dead root detection during orphan cleanup, eg. when there
     are many deleted subvolumes waiting to be cleaned, the trees are
     now looked up in radix tree instead of a O(N^2) search

   - snapshot creation with inherited qgroup will mark the qgroup
     inconsistent, requires a rescan

   - send will emit file capabilities after chown, this produces a
     stream that does not need postprocessing to set the capabilities
     again

   - direct io ported to iomap infrastructure, cleaned up and simplified
     code, notably removing last use of struct buffer_head in btrfs code

  Core changes:

   - factor out backreference iteration, to be used by ordinary
     backreferences and relocation code

   - improved global block reserve utilization
      * better logic to serialize requests
      * increased maximum available for unlink
      * improved handling on large pages (64K)

   - direct io cleanups and fixes
      * simplify layering, where cloned bios were unnecessarily created
        for some cases
      * error handling fixes (submit, endio)
      * remove repair worker thread, used to avoid deadlocks during
        repair

   - refactored block group reading code, preparatory work for new type
     of block group storage that should improve mount time on large
     filesystems

  Cleanups:

   - cleaned up (and slightly sped up) set/get helpers for metadata data
     structure members

   - root bit REF_COWS got renamed to SHAREABLE to reflect the that the
     blocks of the tree get shared either among subvolumes or with the
     relocation trees

  Fixes:

   - when subvolume deletion fails due to ENOSPC, the filesystem is not
     turned read-only

   - device scan deals with devices from other filesystems that changed
     ownership due to overwrite (mkfs)

   - fix a race between scrub and block group removal/allocation

   - fix long standing bug of a runaway balance operation, printing the
     same line to the syslog, caused by a stale status bit on a reloc
     tree that prevented progress

   - fix corrupt log due to concurrent fsync of inodes with shared
     extents

   - fix space underflow for NODATACOW and buffered writes when it for
     some reason needs to fallback to COW mode"

* tag 'for-5.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (133 commits)
  btrfs: fix space_info bytes_may_use underflow during space cache writeout
  btrfs: fix space_info bytes_may_use underflow after nocow buffered write
  btrfs: fix wrong file range cleanup after an error filling dealloc range
  btrfs: remove redundant local variable in read_block_for_search
  btrfs: open code key_search
  btrfs: split btrfs_direct_IO to read and write part
  btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK
  fs: remove dio_end_io()
  btrfs: switch to iomap_dio_rw() for dio
  iomap: remove lockdep_assert_held()
  iomap: add a filesystem hook for direct I/O bio submission
  fs: export generic_file_buffered_read()
  btrfs: turn space cache writeout failure messages into debug messages
  btrfs: include error on messages about failure to write space/inode caches
  btrfs: remove useless 'fail_unlock' label from btrfs_csum_file_blocks()
  btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums
  btrfs: make checksum item extension more efficient
  btrfs: fix corrupt log due to concurrent fsync of inodes with shared extents
  btrfs: unexport btrfs_compress_set_level()
  btrfs: simplify iget helpers
  ...

Pull DAX updates part two from Darrick Wong:
 "This time around, we're hoisting the DONTCACHE flag from XFS into the
  VFS so that we can make the incore DAX mode changes become effective
  sooner.

  We can't change the file data access mode on a live inode because we
  don't have a safe way to change the file ops pointers. The incore
  state change becomes effective at inode loading time, which can happen
  if the inode is evicted. Therefore, we're making it so that
  filesystems can ask the VFS to evict the inode as soon as the last
  holder drops.

  The per-fs changes to make this call this will be in subsequent pull
  requests from Ted and myself.

  Summary:

   - Introduce DONTCACHE flags for dentries and inodes. This hint will
     cause the VFS to drop the associated objects immediately after the
     last put, so that we can change the file access mode (DAX or page
     cache) on the fly"

* tag 'vfs-5.8-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs: Introduce DCACHE_DONTCACHE
  fs: Lift XFS_IDONTCACHE to the VFS layer

Pull DAX updates part one from Darrick Wong:
 "After many years of LKML-wrangling about how to enable programs to
  query and influence the file data access mode (DAX) when a filesystem
  resides on storage devices such as persistent memory, Ira Weiny has
  emerged with a proposed set of standard behaviors that has not been
  shot down by anyone! We're more or less standardizing on the current
  XFS behavior and adapting ext4 to do the same.

  This is the first of a handful pull requests that will make ext4 and
  XFS present a consistent interface for user programs that care about
  DAX. We add a statx attribute that programs can check to see if DAX is
  enabled on a particular file. Then, we update the DAX documentation to
  spell out the user-visible behaviors that filesystems will guarantee
  (until the next storage industry shakeup). The on-disk inode flag has
  been in XFS for a few years now.

  Summary:

   - Clean up io_is_direct.

   - Add a new statx flag to indicate when file data access is being
     done via DAX (as opposed to the page cache).

   - Update the documentation for how system administrators and
     application programmers can take advantage of the (still
     experimental DAX) feature"

Link: https://lore.kernel.org/lkml/20200505002016.1085071-1-ira.weiny@intel.com/

* tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  Documentation/dax: Update Usage section
  fs/stat: Define DAX statx attribute
  fs: Remove unneeded IS_DAX() check in io_is_direct()

Pull xfs updates from Darrick Wong:
 "Most of the changes this cycle are refactoring of existing code in
  preparation for things landing in the future.

  We also fixed various problems and deficiencies in the quota
  implementation, and (I hope) the last of the stale read vectors by
  forcing write allocations to go through the unwritten state until the
  write completes.

  Summary:

   - Various cleanups to remove dead code, unnecessary conditionals,
     asserts, etc.

   - Fix a linker warning caused by xfs stuffing '-g' into CFLAGS
     redundantly.

   - Tighten up our dmesg logging to ensure that everything is prefixed
     with 'XFS' for easier grepping.

   - Kill a bunch of typedefs.

   - Refactor the deferred ops code to reduce indirect function calls.

   - Increase type-safety with the deferred ops code.

   - Make the DAX mount options a tri-state.

   - Fix some error handling problems in the inode flush code and clean
     up other inode flush warts.

   - Refactor log recovery so that each log item recovery functions now
     live with the other log item processing code.

   - Fix some SPDX forms.

   - Fix quota counter corruption if the fs crashes after running
     quotacheck but before any dquots get logged.

   - Don't fail metadata verification on zero-entry attr leaf blocks,
     since they're just part of the disk format now due to a historic
     lack of log atomicity.

   - Don't allow SWAPEXT between files with different [ugp]id when
     quotas are enabled.

   - Refactor inode fork reading and verification to run directly from
     the inode-from-disk function. This means that we now actually
     guarantee that _iget'ted inodes are totally verified and ready to
     go.

   - Move the incore inode fork format and extent counts to the ifork
     structure.

   - Scalability improvements by reducing cacheline pingponging in
     struct xfs_mount.

   - More scalability improvements by removing m_active_trans from the
     hot path.

   - Fix inode counter update sanity checking to run /only/ on debug
     kernels.

   - Fix longstanding inconsistency in what error code we return when a
     program hits project quota limits (ENOSPC).

   - Fix group quota returning the wrong error code when a program hits
     group quota limits.

   - Fix per-type quota limits and grace periods for group and project
     quotas so that they actually work.

   - Allow extension of individual grace periods.

   - Refactor the non-reclaim inode radix tree walking code to remove a
     bunch of stupid little functions and straighten out the
     inconsistent naming schemes.

   - Fix a bug in speculative preallocation where we measured a new
     allocation based on the last extent mapping in the file instead of
     looking farther for the last contiguous space allocation.

   - Force delalloc writes to unwritten extents. This closes a stale
     disk contents exposure vector if the system goes down before the
     write completes.

   - More lockdep whackamole"

* tag 'xfs-5.8-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (129 commits)
  xfs: more lockdep whackamole with kmem_alloc*
  xfs: force writes to delalloc regions to unwritten
  xfs: refactor xfs_iomap_prealloc_size
  xfs: measure all contiguous previous extents for prealloc size
  xfs: don't fail unwritten extent conversion on writeback due to edquot
  xfs: rearrange xfs_inode_walk_ag parameters
  xfs: straighten out all the naming around incore inode tree walks
  xfs: move xfs_inode_ag_iterator to be closer to the perag walking code
  xfs: use bool for done in xfs_inode_ag_walk
  xfs: fix inode ag walk predicate function return values
  xfs: refactor eofb matching into a single helper
  xfs: remove __xfs_icache_free_eofblocks
  xfs: remove flags argument from xfs_inode_ag_walk
  xfs: remove xfs_inode_ag_iterator_flags
  xfs: remove unused xfs_inode_ag_iterator function
  xfs: replace open-coded XFS_ICI_NO_TAG
  xfs: move eofblocks conversion function to xfs_ioctl.c
  xfs: allow individual quota grace period extension
  xfs: per-type quota timers and warn limits
  xfs: switch xfs_get_defquota to take explicit type
  ...

Pull lockdown update from James Morris:
 "An update for the security subsystem to allow unprivileged users
  to see the status of the lockdown feature. From Jeremy Cline"

Also an added comment to describe CAP_SETFCAP.

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  capabilities: add description for CAP_SETFCAP
  lockdown: Allow unprivileged users to see lockdown status

Pull SELinux updates from Paul Moore:
 "The highlights:

   - A number of improvements to various SELinux internal data
     structures to help improve performance. We move the role
     transitions into a hash table. In the content structure we shift
     from hashing the content string (aka SELinux label) to the
     structure itself, when it is valid. This last change not only
     offers a speedup, but it helps us simplify the code some as well.

   - Add a new SELinux policy version which allows for a more space
     efficient way of storing the filename transitions in the binary
     policy. Given the default Fedora SELinux policy with the unconfined
     module enabled, this change drops the policy size from ~7.6MB to
     ~3.3MB. The kernel policy load time dropped as well.

   - Some fixes to the error handling code in the policy parser to
     properly return error codes when things go wrong"

* tag 'selinux-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: netlabel: Remove unused inline function
  selinux: do not allocate hashtabs dynamically
  selinux: fix return value on error in policydb_read()
  selinux: simplify range_write()
  selinux: fix error return code in policydb_read()
  selinux: don't produce incorrect filename_trans_count
  selinux: implement new format of filename transitions
  selinux: move context hashing under sidtab
  selinux: hash context structure directly
  selinux: store role transitions in a hash table
  selinux: drop unnecessary smp_load_acquire() call
  selinux: fix warning Comparison to bool

Pull audit updates from Paul Moore:
 "Summary of the significant patches:

   - Record information about binds/unbinds to the audit multicast
     socket. This helps identify which processes have/had access to the
     information in the audit stream.

   - Cleanup and add some additional information to the netfilter
     configuration events collected by audit.

   - Fix some of the audit error handling code so we don't leak network
     namespace references"

* tag 'audit-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: add subj creds to NETFILTER_CFG record to
  audit: Replace zero-length array with flexible-array
  audit: make symbol 'audit_nfcfgs' static
  netfilter: add audit table unregister actions
  audit: tidy and extend netfilter_cfg x_tables
  audit: log audit netlink multicast bind and unbind
  audit: fix a net reference leak in audit_list_rules_send()
  audit: fix a net reference leak in audit_send_reply()

Pull tomoyo update from Tetsuo Handa:
 "One patch for suppressing coccicheck's warning"

* tag 'tomoyo-pr-20200601' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
  tomoyo: use true for bool variable

Document the purpose of CAP_SETFCAP.  For some reason this capability
had no description while the others did.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

When running with conntrack rules, the dropped overlap fragments may cause
EPERM to be returned to sendto. Instead of completely failing, just ignore
those errors and continue. If this causes packets with overlap fragments to
be dropped as expected, that is okay. And if it causes packets that are
expected to be received to be dropped, which should not happen, it will be
detected as failure.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull io_uring updates from Jens Axboe:
 "A relatively quiet round, mostly just fixes and code improvements. In
particular:

   - Make statx just use the generic statx handler, instead of open
     coding it. We don't need that anymore, as we always call it async
     safe (Bijan)

   - Enable closing of the ring itself. Also fixes O_PATH closure (me)

   - Properly name completion members (me)

   - Batch reap of dead file registrations (me)

   - Allow IORING_OP_POLL with double waitqueues (me)

   - Add tee(2) support (Pavel)

   - Remove double off read (Pavel)

   - Fix overflow cancellations (Pavel)

   - Improve CQ timeouts (Pavel)

   - Async defer drain fixes (Pavel)

   - Add support for enabling/disabling notifications on a registered
     eventfd (Stefano)

   - Remove dead state parameter (Xiaoguang)

   - Disable SQPOLL submit on dying ctx (Xiaoguang)

   - Various code cleanups"

* tag 'for-5.8/io_uring-2020-06-01' of git://git.kernel.dk/linux-block: (29 commits)
  io_uring: fix overflowed reqs cancellation
  io_uring: off timeouts based only on completions
  io_uring: move timeouts flushing to a helper
  statx: hide interfaces no longer used by io_uring
  io_uring: call statx directly
  statx: allow system call to be invoked from io_uring
  io_uring: add io_statx structure
  io_uring: get rid of manual punting in io_close
  io_uring: separate DRAIN flushing into a cold path
  io_uring: don't re-read sqe->off in timeout_prep()
  io_uring: simplify io_timeout locking
  io_uring: fix flush req->refs underflow
  io_uring: don't submit sqes when ctx->refs is dying
  io_uring: async task poll trigger cleanup
  io_uring: add tee(2) support
  splice: export do_tee()
  io_uring: don't repeat valid flag list
  io_uring: rename io_file_put()
  io_uring: remove req->needs_fixed_files
  io_uring: cleanup io_poll_remove_one() logic
  ...

Pull block driver updates from Jens Axboe:
 "On top of the core changes, here are the block driver changes for this
  merge window:

   - NVMe changes:
        - NVMe over Fibre Channel protocol updates, which also reach
          over to drivers/scsi/lpfc (James Smart)
        - namespace revalidation support on the target (Anthony
          Iliopoulos)
        - gcc zero length array fix (Arnd Bergmann)
        - nvmet cleanups (Chaitanya Kulkarni)
        - misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
        - use a SRQ per completion vector (Max Gurtovoy)
        - fix handling of runtime changes to the queue count (Weiping
          Zhang)
        - t10 protection information support for nvme-rdma and
          nvmet-rdma (Israel Rukshin and Max Gurtovoy)
        - target side AEN improvements (Chaitanya Kulkarni)
        - various fixes and minor improvements all over, icluding the
          nvme part of the lpfc driver"

   - Floppy code cleanup series (Willy, Denis)

   - Floppy contention fix (Jiri)

   - Loop CONFIGURE support (Martijn)

   - bcache fixes/improvements (Coly, Joe, Colin)

   - q->queuedata cleanups (Christoph)

   - Get rid of ioctl_by_bdev (Christoph, Stefan)

   - md/raid5 allocation fixes (Coly)

   - zero length array fixes (Gustavo)

   - swim3 task state fix (Xu)"

* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
  bcache: configure the asynchronous registertion to be experimental
  bcache: asynchronous devices registration
  bcache: fix refcount underflow in bcache_device_free()
  bcache: Convert pr_<level> uses to a more typical style
  bcache: remove redundant variables i and n
  lpfc: Fix return value in __lpfc_nvme_ls_abort
  lpfc: fix axchg pointer reference after free and double frees
  lpfc: Fix pointer checks and comments in LS receive refactoring
  nvme: set dma alignment to qword
  nvmet: cleanups the loop in nvmet_async_events_process
  nvmet: fix memory leak when removing namespaces and controllers concurrently
  nvmet-rdma: add metadata/T10-PI support
  nvmet: add metadata support for block devices
  nvmet: add metadata/T10-PI support
  nvme: add Metadata Capabilities enumerations
  nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
  nvmet: rename nvmet_rw_len to nvmet_rw_data_len
  nvmet: add metadata characteristics for a namespace
  nvme-rdma: add metadata/T10-PI support
  nvme-rdma: introduce nvme_rdma_sgl structure
  ...

found by smatch:
drivers/net/net_failover.c:65 net_failover_open() error:
 we previously assumed 'primary_dev' could be null (see line 43)

Fixes: cfc80d9a ("net: Introduce net_failover driver")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull block updates from Jens Axboe:
 "Core block changes that have been queued up for this release:

   - Remove dead blk-throttle and blk-wbt code (Guoqing)

   - Include pid in blktrace note traces (Jan)

   - Don't spew I/O errors on wouldblock termination (me)

   - Zone append addition (Johannes, Keith, Damien)

   - IO accounting improvements (Konstantin, Christoph)

   - blk-mq hardware map update improvements (Ming)

   - Scheduler dispatch improvement (Salman)

   - Inline block encryption support (Satya)

   - Request map fixes and improvements (Weiping)

   - blk-iocost tweaks (Tejun)

   - Fix for timeout failing with error injection (Keith)

   - Queue re-run fixes (Douglas)

   - CPU hotplug improvements (Christoph)

   - Queue entry/exit improvements (Christoph)

   - Move DMA drain handling to the few drivers that use it (Christoph)

   - Partition handling cleanups (Christoph)"

* tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits)
  block: mark bio_wouldblock_error() bio with BIO_QUIET
  blk-wbt: rename __wbt_update_limits to wbt_update_limits
  blk-wbt: remove wbt_update_limits
  blk-throttle: remove tg_drain_bios
  blk-throttle: remove blk_throtl_drain
  null_blk: force complete for timeout request
  blk-mq: drain I/O when all CPUs in a hctx are offline
  blk-mq: add blk_mq_all_tag_iter
  blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx
  blk-mq: use BLK_MQ_NO_TAG in more places
  blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG
  blk-mq: move more request initialization to blk_mq_rq_ctx_init
  blk-mq: simplify the blk_mq_get_request calling convention
  blk-mq: remove the bio argument to ->prepare_request
  nvme: force complete cancelled requests
  blk-mq: blk-mq: provide forced completion method
  block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds
  block: blk-crypto-fallback: remove redundant initialization of variable err
  block: reduce part_stat_lock() scope
  block: use __this_cpu_add() instead of access by smp_processor_id()
  ...

Just finished bisecting mmotm, to find why a test which used to take
four minutes now took more than an hour: the __buffer_migrate_page()
cleanup left behind a get_page() which attach_page_private() now does.

Fixes: cd0f3715 ("mm/migrate.c: call detach_page_private to cleanup code")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>