- 16 Feb, 2022 8 commits
-
-
Javier Martinez Canillas authored
The ssd130x DRM driver also makes use of this Device Tree binding to allow existing users of the fbdev driver to migrate without the need to change their Device Trees. Add myself as another maintainer of the binding, to make sure that I will be on Cc when patches are proposed for it. Suggested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220214133935.3278933-1-javierm@redhat.com
-
Javier Martinez Canillas authored
To make sure that tools like the get_maintainer.pl script will suggest to Cc me if patches are posted for this driver. Also include the Device Tree binding for the old ssd1307fb fbdev driver since the new DRM driver was made compatible with the existing binding. Signed-off-by:
-
Javier Martinez Canillas authored
The ssd130x driver only provides the core support for these devices but it does not have any bus transport logic. Add a driver to interface over I2C. Signed-off-by:
-
Javier Martinez Canillas authored
This adds a DRM driver for SSD1305, SSD1306, SSD1307 and SSD1309 Solomon OLED display controllers. It's only the core part of the driver and a bus specific driver is needed for each transport interface supported by the display controllers. Signed-off-by:
-
Javier Martinez Canillas authored
Add support to convert from XR24 to reversed monochrome for drivers that control monochromatic display panels, that only have 1 bit per pixel. The function does a line-by-line conversion doing an intermediate step first from XR24 to 8-bit grayscale and then to reversed monochrome. The drm_fb_gray8_to_mono_reversed_line() helper was based on code from drivers/gpu/drm/tiny/repaper.c driver. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Javier Martinez Canillas authored
Pull the per-line conversion logic into a separate helper function. This will allow to do line-by-line conversion in other helpers that convert to a gray8 format. Suggested-by:
-
Ville Syrjälä authored
There is no object id in drm_display_mode anymore. Remove stale comments to the contrary. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209091928.14766-2-ville.syrjala@linux.intel.comAcked-by:
-
Minghao Chi (CGEL ZTE) authored
Use of_device_get_match_data() to simplify the code. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by:
-
- 15 Feb, 2022 4 commits
-
-
Douglas Anderson authored
Recently we added generic "edp-panel"s probed by EDID. To support panels in this way we look at the panel ID in the EDID and look up the panel in a table that has power sequence timings. If we find a panel that's not in the table we will still attempt to use it but we'll use conservative timings. While it's likely that these conservative timings will work for most nearly all panels, the performance of turning the panel off and on suffers. We'd like to be able to reliably detect the case that we're using the hardcoded timings without relying on parsing dmesg. This allows us to implement tests that ensure that no devices get shipped that are relying on the conservative timings. Let's add a new debugfs entry to panel devices. It will have one of: * UNKNOWN - We tried to detect a panel but it wasn't in our table. * HARDCODED - We're not using generic "edp-panel" probed by EDID. * A panel name - This is the name of the panel from our table. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Douglas Anderson authored
We'd like panels to be able to add things to debugfs underneath the connector's directory. Let's plumb it through. A panel will be able to put things in a "panel" directory under the connector's directory. Note that debugfs is not ABI and so it's always possible that the location that the panel gets for its debugfs could change in the future. NOTE: this currently only works if you're using a modern architecture. Specifically the plumbing relies on _both_ drm_bridge_connector and drm_panel_bridge. If you're not using one or both of these things then things won't be plumbed through. As a side effect of this change, drm_bridges can also get callbacks to put stuff underneath the connector's debugfs directory. At the moment all bridges in the chain have their debugfs_init() called with the connector's root directory. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220204161245.v2.2.Ib0bd5346135cbb0b63006b69b61d4c8af6484740@changeid
-
Douglas Anderson authored
The ti-sn65dsi86 driver shouldn't hand-roll its own bridge connector. It should use the normal drm_bridge_connector. Let's switch to do that, removing all of the custom code. NOTE: this still _doesn't_ implement DRM_BRIDGE_ATTACH_NO_CONNECTOR support for ti-sn65dsi86 and that would still be a useful thing to do in the future. It was attempted in the past [1] but put on the back burner. However, unless we instantly change ti-sn65dsi86 fully from not supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR at all to _only_ supporting DRM_BRIDGE_ATTACH_NO_CONNECTOR then we'll still need a bit of time when we support both. This is a better way to support the old way where the driver hand rolls things itself. A new notes about the implementation here: * When using the drm_bridge_connector the connector should be created after all the bridges, so we change the ordering a bit. * I'm reasonably certain that we don't need to do anything to "free" the new drm_bridge_connector. If drm_bridge_connector_init() returns success then we know drm_connector_init() was called with the `drm_bridge_connector_funcs`. The `drm_bridge_connector_funcs` has a .destroy() that does all the cleanup. drm_connector_init() calls __drm_mode_object_add() with a drm_connector_free() that will call the .destroy(). * I'm also reasonably certain that I don't need to "undo" the drm_bridge_attach() if drm_bridge_connector_init() fails. The "detach" function is private and other similar code doesn't try to undo the drm_bridge_attach() in error cases. There's also a comment indicating the lack of balance at the top of drm_bridge_attach(). [1] https://lore.kernel.org/r/20210920225801.227211-4-robdclark@gmail.comSigned-off-by:
-
Christian König authored
Use the one provided by TTM instead. v2: drop new_mem parameter as well Signed-off-by:
Christian König <christian.koenig@amd.com> Tested-by:
Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220214093439.2989-5-christian.koenig@amd.com
-
- 14 Feb, 2022 16 commits
-
-
Pin-Yen Lin authored
The length of EDID block can be longer than 256 bytes, so we should use `int` instead of `u8` for the `edid_pos` variable. Fixes: 8bdfc5da ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by:
Pin-Yen Lin <treapking@chromium.org> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220210103827.402436-1-treapking@chromium.org
-
Christian König authored
This is provided by TTM now. Also switch man->size to bytes instead of pages and fix the double printing of size and usage in debugfs. v2: fix size checking as well Signed-off-by:
-
Christian König authored
This is provided by TTM now. Signed-off-by:
-
Christian König authored
This is provided by TTM now. Also switch man->size to bytes instead of pages and fix the double printing of size and usage in debugfs. v2: fix size checking as well Signed-off-by:
-
Kevin Tang authored
platform_get_resource() may fail and return NULL, so check it's value before using it. Reported-by:
Zou Wei <zou_wei@huawei.com> Signed-off-by:
Kevin Tang <kevin3.tang@gmail.com> Reviewed-by:
-
Kevin Tang authored
'drm' could be null in sprd_drm_shutdown, and drm_warn maybe dereference it, remove this warning log. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Kevin Tang authored
On commit 43531edd ("drm/sprd: add Unisoc's drm kms master"), adds the config DRM_SPRD, which selects DRM_KMS_CMA_HELPER. However, commit 09717af7 ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option") just removed the DRM_KMS_CMA_HELPER. So the select DRM_KMS_CMA_HELPER refers to a non-existing kconfig symbol. Reported-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Christian König authored
It makes sense to have this in the common manager for debugging and accounting of how much resources are used. v2: cleanup kerneldoc a bit v3: drop the atomic, update counter under lock instead Signed-off-by:
-
Christian König authored
Leave the man->size units as driver defined. Signed-off-by:
-
Hsin-Yi Wang authored
List panel under aux-bus node if it's connected to anx7625's aux bus. Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
-
Hsin-Yi Wang authored
Support reading edid through aux channel if panel is connected to aux bus. Extend anx7625_aux_dpcd_trans() to implement aux transfer function: 1. panel is populated in devm_of_dp_aux_populate_ep_devices(), so move anx7625_parse_dt() after. 2. Use pm runtime autosuspend since aux transfer function is called multiple times when reading edid. 3. No-op if aux transfer length is 0. Signed-off-by:
Xin Ji <xji@analogixsemi.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Hsin-Yi Wang authored
Use devm_kzalloc instead of kzalloc and drop kfree(). Let the memory handled by driver detach. Signed-off-by:
-
Xin Ji authored
Send DPCD command to downstream before anx7625 power down, let downstream monitor enter into standby mode. Signed-off-by:
-
Paul Boddie authored
We have to make sure that - JZ_LCD_OSDC_ALPHAEN is set - plane f0 is disabled as it's not working yet Tested on MIPS Creator CI20 board. Signed-off-by:
Paul Boddie <paul@boddie.org.uk> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Fixes: ef2f5d0a ("drm/ingenic: prepare ingenic drm for later addition of JZ4780") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> [pcercuei: add proper fixes commit, slightly reword commit description] Link: https://patchwork.freedesktop.org/patch/msgid/9d3a2000d2bb014f1afb0613537bdc523202135d.1644681054.git.hns@goldelico.com
-
Thomas Zimmermann authored
Set the VM_DONTDUMP flag on mmap'ed VMAs to omit them from core dumps. It's display-buffer memory; who knows what secrets these buffers contain. Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220209155634.3994-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Initialize default vm_ops in static initialization of the GEM SHMEM funcs, instead of the mmap code. It's simply better style. GEM helpers will later set a VMA's vm_ops from the default automatically. v2: * also update the drivers that build upon GEM SHMEM Signed-off-by:
Steven Price <steven.price@arm.com> Reviewed-by:
-
- 12 Feb, 2022 2 commits
-
-
Sam Ravnborg authored
Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC. Based on .txt binding from Zubair Lutfullah Kakakhel Signed-off-by:
-
Erico Nunes authored
Currently when users try to run an application with lima and that hits an issue such as a timeout, a message saying "fail to save task state" and "error task list is full" is shown in dmesg. The error task dump is a debug feature disabled by default, so the error task list is usually not going to be available at all. The message can be misleading and creates confusion in bug reports. We can avoid that code path and that particular message when the user has not explicitly set the max_error_tasks parameter to enable the feature. Signed-off-by:
Erico Nunes <nunes.erico@gmail.com> Reviewed-by:
Qiang Yu <yuq825@gmail.com> Reviewed-by:
-
- 11 Feb, 2022 4 commits
-
-
Andrey Grodzovsky authored
Update function name. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reported-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211205500.601391-1-andrey.grodzovsky@amd.com
-
Alex Bee authored
The Bifrost GPU in Rockchip RK356x SoCs has a core and a bus clock. Reflect this in the SoC specific part of the binding. Signed-off-by:
Alex Bee <knaerzche@gmail.com> [move the changes to the SoC section] Signed-off-by:
Michael Riesch <michael.riesch@wolfvision.net> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220209215549.94524-2-michael.riesch@wolfvision.net
-
Alyssa Rosenzweig authored
The IDVS group size feature was missing. It is used on some Bifrost and Valhall GPUs, and is the last kernel-relevant Bifrost feature we're missing. This feature adds an extra IDVS group size field to the JM_CONFIG register. In kbase, the value is configurable via the device tree; kbase uses 0xF as a default if no value is specified. Until we find a device demanding otherwise, let's always set the 0xF default on devices which support this feature mimicking kbase's behaviour. Tuning this register slightly improves performance of index-driven vertex shading. On Mali-G52 (with Mesa), overall glmark2 score is improved from 1026 to 1037. Geometry-heavy scenes like -bshading are improved from 1068 to 1098. Signed-off-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by:
-
Christian König authored
It is illegal to add a dma_fence_chain as timeline point. Flatten out the fences into a dma_fence_array instead. Signed-off-by:
Nirmoy Das <nirmoy.das@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220209182600.434803-1-christian.koenig@amd.com
-
- 10 Feb, 2022 6 commits
-
-
Neil Armstrong authored
When the dw-hdmi bridge is in first place of the bridge chain, this means there is no way to select an input format of the dw-hdmi HW component. Since introduction of display-connector, negotiation was broken since the dw-hdmi negotiation code only worked when the dw-hdmi bridge was in last position of the bridge chain or behind another bridge also supporting input & output format negotiation. Commit 7cd70656 ("drm/bridge: display-connector: implement bus fmts callbacks") was introduced to make negotiation work again by making display-connector act as a pass-through concerning input & output format negotiation. But in the case where the dw-hdmi is single in the bridge chain, for example on Renesas SoCs, with the display-connector bridge the dw-hdmi is no more single, breaking output format. Reported-by:
Biju Das <biju.das.jz@bp.renesas.com> Bisected-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by:
Neil Armstrong <narmstrong@baylibre.com> [narmstrong: add proper fixes commit] Reviewed-by:
-
Thomas Zimmermann authored
Clip the damage area horizontally if only a single scanline has been changed. This is helpful to reduce the memcpy overhead for small writes. Signed-off-by:
-
Thomas Zimmermann authored
Write helpers used to mark the complete screen as dirty. This is wasteful for writes that only change a small portion of the screen. Fix the problem by computing the damaged area from the written memory range and perform damage handling accordingly. Signed-off-by:
-
Thomas Zimmermann authored
Add drm_fb_helper_memory_range_to_clip(), a helper function that accepts an linear range of video memory and converts it into a rectangle. The computed rectangle describes the damaged area in terms of scanlines and pixels per scanline. While at it, make the code more readable by using struct drm_rect and related helpers. The code was previously part of the deferred I/O helpers, but is also useful for damage handling of regular write operations. Update the deferred I/O code to use the new function. v2: * rename helper (Javier) Signed-off-by:
-
Thomas Zimmermann authored
Don't clip the damage rectangle against the viewport. This only works if the viewport is located at the beginning of the video memory and the video memory doesn't extend the screen (i.e., if there's no overallocation). Fbdev emulation transfers data from write operations into a possible shadow buffer, then into a GEM buffer object, and finally via graphics driver onto the screen. If callers write outside the currently visible area, clipping the damage rectangle against the viewport will loose these updates in the shadow buffer and the fbdev's buffer object will contain stale data. Panning the viewport to the stale area of the buffer will display obsolete data. Instead, mark all written areas as damaged, so that the damage handler updates the buffer object from the shadow buffer for all such areas. The graphics driver's later has the option of clipping the damaged area against the viewport when updating the screen from the buffer object. Signed-off-by:
-
Thomas Zimmermann authored
Computing the clip rectangle is prone to off-by-one errors when writes happen near the end of a memory page. Point the end of the memory area to the first trailing byte, so that (end - start) returns the area's length. Signed-off-by:
-
