- 15 Jan, 2006 40 commits
-
-
Mauro Carvalho Chehab authored
-
Markus Rechberger authored
- Added remote control support for pinnacle pctv Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- Samsung TBMV30111IN has 6 entries Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- Tuner_params->tda988x is unused right now, so let's disable it for 2.6.16 - This is currently happening at the card level, but the plan is to move this configuration into the tuner_params configuration. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- clean up some comments Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Ricardo Cerqueira authored
- Fix some sound quality & distortion problems. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
- Return -EINVAL for unknown commands. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
- Moved MSP_SET_MATRIX to v4l2-common.h - Fix typos and integer overflows in tea5767.c - Split old freq field into a tv_freq and a radio_freq. Prevents that a radio tuner is initialized with a tv frequency or vice versa. - When switching to radio mode initialize the tuner with the last used radio frequency (this was already done for the TV mode). As a result of these changes the tuner module now remembers the last set radio and TV frequencies, which is what you would expect to happen. - Move out of range frequencies to the closest valid frequency as per v4l2 API spec. - Fix incorrect initial radio frequency (multiplier is 16000, not 16) - Add boundary check for out of range frequencies. - Use new flag to check if the order of the CB and freq. depends on the last set frequency. That is needed for some tuners or you can get static as a result. The flag is added for those tuners where I know that the datasheet indicates that this is necessary. - For this new check use the last set div value, not the last frequency as radio frequencies are always much higher due to the 16000 multiplier. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- Tda988x parameters should be defined per tuner_param_type, for each tuner_params array member. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
-
Linus Torvalds authored
-
Wim Van Sebroeck authored
Add a MAINTAINER entry for the watchdog device drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Ian Campbell authored
The following makes drivers/char/watchdog/sa1100_wdt.c sparse clean. Signed-off-by: Ian Campbell <icampbell@arcom.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Kyle McMartin authored
For some reason, the BITS_PER_LONG == 64 case of atomic_long_set was using atomic_set instead of atomic64_set. This does not jive with architectures which use an inline instead of a #define to implement their atomic_set() primitives. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jean Delvare authored
Fix the following warning which was introduced in 2.6.15-git8 by commit 7408187d: CC [M] drivers/media/video/zoran_card.o drivers/media/video/zoran_card.c: In function `zr36057_init': drivers/media/video/zoran_card.c:1053: warning: assignment makes integer from pointer without a cast Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Russell King authored
asm/mach/arch.h introduced a __deprecated, but didn't include compiler.h, causing: In file included from arch/arm/mach-at91rm9200/devices.c:13: include/asm/mach/arch.h:23: warning: no semicolon at end of struct or union include/asm/mach/arch.h:23: error: syntax error before 'phys_ram' include/asm/mach/arch.h:34: error: syntax error before ':' token include/asm/mach/arch.h:35: error: syntax error before ':' token include/asm/mach/arch.h:36: error: syntax error before ':' token include/asm/mach/arch.h:37: error: syntax error before ':' token include/asm/mach/arch.h:45: error: syntax error before '}' token Add the necessary include. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Andrew Morton authored
- Not sure what went wrong here, but SND_PCI_PM_CALLBACKS got deleted. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Paul Mackerras authored
When I removed the powermac support from arch/ppc/kernel/pci.c, I overlooked the fact that that file is used in 32-bit ARCH=powerpc builds. To prevent problems in future, restore the original version of that file as arch/powerpc/kernel/pci_32.c, and use that. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Mauro Carvalho Chehab authored
- BOOT_SIZE name is also used at alpha and were breaking compiling with allyesconfig. - All BOOT_* renamed to AV7110_BOOT* to fix and keep names with the same style. Thanks to Andrew Morton for pointing this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Ingo Molnar authored
- Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Panagiotis Christeas authored
- Workaround to fix a known regression at cx88-tvaudio.c - provide a module parameter workaround to always enable analog output. Signed-off-by: Panagiotis Christeas <p_christ@hol.gr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Adrian Bunk authored
- This patch makes some needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
- Cx88 alsa is experimental. - Removed need of PCM OSS for an ALSA module. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hartmut Hackmann authored
- Enabled audio PLL. This is mandatory for NICAM sound - modify FM IF frequency to 5.5MHz for SAA7133/35 if tuner is tda8290 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Tyler Trafford authored
- Add i2c ids for drivers: upd64031a saa717x upd64083 wm8739 Signed-off-by: Tyler Trafford <tatrafford@comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Paul Mackerras authored
This makes ARCH=powerpc the default on 32-bit powerpc machines, where uname -m returns ppc, as well as on 64-bit powerpc machines. Most people who would be likely to build their own kernels on 32-bit powerpc machines would be using powermacs or CHRP machines, both of which are supported with ARCH=powerpc now. Embedded ppc developers whose ports haven't been moved over to arch/powerpc yet will have to explicitly set ARCH=ppc now. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This makes it possible to build kernels for PReP and/or CHRP with ARCH=ppc by removing the (non-building) powermac support. It's now also possible to select PReP and CHRP independently. Powermac users should now build with ARCH=powerpc instead of ARCH=ppc. (This does mean that it is no longer possible to build a 32-bit kernel for a G5.) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linus Torvalds authored
Some versions of gcc generate incorrect code for the inet_check_attr() function, apparently due to a totally bogus index -> pointer comparison transformation. At least "gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)" from FC4 is affected, possibly others too. This changes the function subtly so that the buggy gcc transformation doesn't trigger. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Haren Myneni authored
Noticed in 2.6.15-git9 that CRASH_DUMP option is moved to top level. Moved CRASH_DUMP into "kernel options" next to KEXEC and this config option supports only for PPC64 at this time. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Ingo Molnar authored
If optimizing for size (CONFIG_CC_OPTIMIZE_FOR_SIZE), allow gcc4 compilers to decide what to inline and what not - instead of the kernel forcing gcc to inline all the time. This requires several places that require to be inlined to be marked as such, previous patches in this series do that. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Peter Osterlund authored
Un-inline two functions in the pktcdvd driver. This makes the compiled code 172 bytes smaller on my system. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Arjan van de Ven authored
Mark a few VFS functions as mandatory inline (based on Al Viro's request); these must be inline due to stack usage issues during a recursive loop that happens during the recursive symlink resolution (symlink to a symlink to a symlink ..) This patch at this point does not change behavior and is for documentation purposes only (but this changes later in the series) Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
Arjan van de Ven <arjan@infradead.org> Mark a number of functions as 'must inline'. The functions affected by this patch need to be inlined because they use knowledge that their arguments are constant so that most of the function optimizes away. At this point this patch does not change behavior, it's for documentation only (and for future patches in the inline series) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ingo Molnar authored
Allow gcc4 compilers to optimize unit-at-a-time. This flag enables gcc to "see" the entire C file before making optimisation decisions such as inline, which results in gcc making better decisions. One of the immediate effects of this is that static functions that are used only once now get inlined. gcc 3.4 has this flag as well, however gcc 3.x have a problem with inlining and stacks and as a result, enabling this flag there would cause excessive and unacceptable stack use. This problem is fixed in the gcc 4.x series. The x86-64 architecture already enables this feature so it's well tested already. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-