- 03 Sep, 2020 40 commits
-
-
Mike Christie authored
[ Upstream commit fa39ab51 ] ixgbe_fcoe_ddp_setup() can be called from the main I/O path and is called with a spin_lock held, so we have to use GFP_ATOMIC allocation instead of GFP_KERNEL. Link: https://lore.kernel.org/r/1596831813-9839-1-git-send-email-michael.christie@oracle.com cc: Hannes Reinecke <hare@suse.de> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sylwester Nawrocki authored
[ Upstream commit f082bb59 ] The driver supports WM1811, WM8994, WM8958 devices but according to documentation and the regmap definitions the WM8958_DSP2_* registers are only available on WM8958. In current code these registers are being accessed as if they were available on all the three chips. When starting playback on WM1811 CODEC multiple errors like: "wm8994-codec wm8994-codec: ASoC: error at soc_component_read_no_lock on wm8994-codec: -5" can be seen, which is caused by attempts to read an unavailable WM8958_DSP2_PROGRAM register. The issue has been uncovered by recent commit "e2329eeb ASoC: soc-component: add soc_component_err()". This patch adds a check in wm8958_aif_ev() callback so the DSP2 handling is only done for WM8958. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200731173834.23832-1-s.nawrocki@samsung.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Vineeth Vijayan authored
[ Upstream commit 0b8eb2ee ] The scanning through subchannels during the time of an event could take significant amount of time in case of platforms with lots of known subchannels. This might result in higher scheduling latencies for other tasks especially on systems with a single CPU. Add cond_resched() call, as the loop in slow_eval_known_fn() can be executed for a longer duration. Reviewed-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
Amelie Delaunay authored
[ Upstream commit 9cc61973 ] Fix spi->clk_rate when it is odd to the nearest lowest even value because minimum SPI divider is 2. Signed-off-by:
Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by:
Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/1597043558-29668-4-git-send-email-alain.volmat@st.comSigned-off-by:
-
Xianting Tian authored
[ Upstream commit 377254b2 ] If a device is hot-removed --- for example, when a physical device is unplugged from pcie slot or a nbd device's network is shutdown --- this can result in a BUG_ON() crash in submit_bh_wbc(). This is because the when the block device dies, the buffer heads will have their Buffer_Mapped flag get cleared, leading to the crash in submit_bh_wbc. We had attempted to work around this problem in commit a17712c8 ("ext4: check superblock mapped prior to committing"). Unfortunately, it's still possible to hit the BUG_ON(!buffer_mapped(bh)) if the device dies between when the work-around check in ext4_commit_super() and when submit_bh_wbh() is finally called: Code path: ext4_commit_super judge if 'buffer_mapped(sbh)' is false, return <== commit a17712c8 lock_buffer(sbh) ... unlock_buffer(sbh) __sync_dirty_buffer(sbh,... lock_buffer(sbh) judge if 'buffer_mapped(sbh))' is false, return <== added by this patch submit_bh(...,sbh) submit_bh_wbc(...,sbh,...) [100722.966497] kernel BUG at fs/buffer.c:3095! <== BUG_ON(!buffer_mapped(bh))' in submit_bh_wbc() [100722.966503] invalid opcode: 0000 [#1] SMP [100722.966566] task: ffff8817e15a9e40 task.stack: ffffc90024744000 [100722.966574] RIP: 0010:submit_bh_wbc+0x180/0x190 [100722.966575] RSP: 0018:ffffc90024747a90 EFLAGS: 00010246 [100722.966576] RAX: 0000000000620005 RBX: ffff8818a80603a8 RCX: 0000000000000000 [100722.966576] RDX: ffff8818a80603a8 RSI: 0000000000020800 RDI: 0000000000000001 [100722.966577] RBP: ffffc90024747ac0 R08: 0000000000000000 R09: ffff88207f94170d [100722.966578] R10: 00000000000437c8 R11: 0000000000000001 R12: 0000000000020800 [100722.966578] R13: 0000000000000001 R14: 000000000bf9a438 R15: ffff88195f333000 [100722.966580] FS: 00007fa2eee27700(0000) GS:ffff88203d840000(0000) knlGS:0000000000000000 [100722.966580] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [100722.966581] CR2: 0000000000f0b008 CR3: 000000201a622003 CR4: 00000000007606e0 [100722.966582] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [100722.966583] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [100722.966583] PKRU: 55555554 [100722.966583] Call Trace: [100722.966588] __sync_dirty_buffer+0x6e/0xd0 [100722.966614] ext4_commit_super+0x1d8/0x290 [ext4] [100722.966626] __ext4_std_error+0x78/0x100 [ext4] [100722.966635] ? __ext4_journal_get_write_access+0xca/0x120 [ext4] [100722.966646] ext4_reserve_inode_write+0x58/0xb0 [ext4] [100722.966655] ? ext4_dirty_inode+0x48/0x70 [ext4] [100722.966663] ext4_mark_inode_dirty+0x53/0x1e0 [ext4] [100722.966671] ? __ext4_journal_start_sb+0x6d/0xf0 [ext4] [100722.966679] ext4_dirty_inode+0x48/0x70 [ext4] [100722.966682] __mark_inode_dirty+0x17f/0x350 [100722.966686] generic_update_time+0x87/0xd0 [100722.966687] touch_atime+0xa9/0xd0 [100722.966690] generic_file_read_iter+0xa09/0xcd0 [100722.966694] ? page_cache_tree_insert+0xb0/0xb0 [100722.966704] ext4_file_read_iter+0x4a/0x100 [ext4] [100722.966707] ? __inode_security_revalidate+0x4f/0x60 [100722.966709] __vfs_read+0xec/0x160 [100722.966711] vfs_read+0x8c/0x130 [100722.966712] SyS_pread64+0x87/0xb0 [100722.966716] do_syscall_64+0x67/0x1b0 [100722.966719] entry_SYSCALL64_slow_path+0x25/0x25 To address this, add the check of 'buffer_mapped(bh)' to __sync_dirty_buffer(). This also has the benefit of fixing this for other file systems. With this addition, we can drop the workaround in ext4_commit_supper(). [ Commit description rewritten by tytso. ] Signed-off-by:
Xianting Tian <xianting_tian@126.com> Link: https://lore.kernel.org/r/1596211825-8750-1-git-send-email-xianting_tian@126.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 0f5bde1d ] When remounting filesystem fails late during remount handling and block_validity mount option is also changed during the remount, we fail to restore system zone information to a state matching the mount option. This is mostly harmless, just the block validity checking will not match the situation described by the mount option. Make sure these two are always consistent. Reported-by:
Lukas Czerner <lczerner@redhat.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200728130437.7804-7-jack@suse.czSigned-off-by:
-
Jan Kara authored
[ Upstream commit d176b1f6 ] ext4_setup_system_zone() can fail. Handle the failure in ext4_remount(). Reviewed-by:
-
Lukas Czerner authored
[ Upstream commit f25391eb ] Currently there is a problem with mount options that can be both set by vfs using mount flags or by a string parsing in ext4. i_version/iversion options gets lost after remount, for example $ mount -o i_version /dev/pmem0 /mnt $ grep pmem0 /proc/self/mountinfo | grep i_version 310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,seclabel,i_version $ mount -o remount,ro /mnt $ grep pmem0 /proc/self/mountinfo | grep i_version nolazytime gets ignored by ext4 on remount, for example $ mount -o lazytime /dev/pmem0 /mnt $ grep pmem0 /proc/self/mountinfo | grep lazytime 310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,lazytime,seclabel $ mount -o remount,nolazytime /mnt $ grep pmem0 /proc/self/mountinfo | grep lazytime 310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,lazytime,seclabel Fix it by applying the SB_LAZYTIME and SB_I_VERSION flags from *flags to s_flags before we parse the option and use the resulting state of the same flags in *flags at the end of successful remount. Signed-off-by:
Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200723150526.19931-1-lczerner@redhat.comSigned-off-by:
-
zhangyi (F) authored
[ Upstream commit c044f3d8 ] If we free a metadata buffer which has been failed to async write out in the background, the jbd2 checkpoint procedure will not detect this failure in jbd2_log_do_checkpoint(), so it may lead to filesystem inconsistency after cleanup journal tail. This patch abort the journal if free a buffer has write_io_error flag to prevent potential further inconsistency. Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20200620025427.1756360-5-yi.zhang@huawei.comSigned-off-by:
-
Lukas Czerner authored
[ Upstream commit 273108fa ] Ext4 uses blkdev_get_by_dev() to get the block_device for journal device which does check to see if the read-only block device was opened read-only. As a result ext4 will hapily proceed mounting the file system with external journal on read-only device. This is bad as we would not be able to use the journal leading to errors later on. Instead of simply failing to mount file system in this case, treat it in a similar way we treat internal journal on read-only device. Allow to mount with -o noload in read-only mode. This can be reproduced easily like this: mke2fs -F -O journal_dev $JOURNAL_DEV 100M mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV blockdev --setro $JOURNAL_DEV mount $FS_DEV $MNT touch $MNT/file umount $MNT leading to error like this [ 1307.318713] ------------[ cut here ]------------ [ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0) [ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580 [ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd [ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G W I 5.8.0-rc5 #2 [ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019 [ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580 [ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e [ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286 [ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000 [ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000 [ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024 [ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400 [ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 1307.500308] FS: 0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000 [ 1307.508396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0 [ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1307.535538] PKRU: 55555554 [ 1307.538250] Call Trace: [ 1307.540708] generic_make_request+0x30/0x340 [ 1307.544985] submit_bio+0x43/0x190 [ 1307.548393] ? bio_add_page+0x62/0x90 [ 1307.552068] submit_bh_wbc+0x16a/0x190 [ 1307.555833] jbd2_write_superblock+0xec/0x200 [jbd2] [ 1307.560803] jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2] [ 1307.566557] jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2] [ 1307.572566] ? check_preempt_curr+0x7a/0x90 [ 1307.576756] ? update_curr+0xe1/0x1d0 [ 1307.580421] ? account_entity_dequeue+0x7b/0xb0 [ 1307.584955] ? newidle_balance+0x231/0x3d0 [ 1307.589056] ? __switch_to_asm+0x42/0x70 [ 1307.592986] ? __switch_to_asm+0x36/0x70 [ 1307.596918] ? lock_timer_base+0x67/0x80 [ 1307.600851] kjournald2+0xbd/0x270 [jbd2] [ 1307.604873] ? finish_wait+0x80/0x80 [ 1307.608460] ? commit_timeout+0x10/0x10 [jbd2] [ 1307.612915] kthread+0x114/0x130 [ 1307.616152] ? kthread_park+0x80/0x80 [ 1307.619816] ret_from_fork+0x22/0x30 [ 1307.623400] ---[ end trace 27490236265b1630 ]--- Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.comSigned-off-by:
-
Jan Kara authored
[ Upstream commit 11215630 ] A customer has reported a BUG_ON in ext4_clear_journal_err() hitting during an LTP testing. Either this has been caused by a test setup issue where the filesystem was being overwritten while LTP was mounting it or the journal replay has overwritten the superblock with invalid data. In either case it is preferable we don't take the machine down with a BUG_ON. So handle the situation of unexpectedly missing has_journal feature more gracefully. We issue warning and fail the mount in the cases where the race window is narrow and the failed check is most likely a programming error. In cases where fs corruption is more likely, we do full ext4_error() handling before failing mount / remount. Reviewed-by:
-
Lukas Czerner authored
[ Upstream commit 24dc9864 ] Callers of __jbd2_journal_unfile_buffer() and __jbd2_journal_refile_buffer() assume that the b_transaction is set. In fact if it's not, we can end up with journal_head refcounting errors leading to crash much later that might be very hard to track down. Add asserts to make sure that is the case. We also make sure that b_next_transaction is NULL in __jbd2_journal_unfile_buffer() since the callers expect that as well and we should not get into that stage in this state anyway, leading to problems later on if we do. Tested with fstests. Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 07c84341 ] If a memory allocation fails within a 'usb_ep_alloc_request()' call, the already allocated memory must be released. Fix a mix-up in the code and free the correct requests. Fixes: c52661d6 ("usb-gadget: Initial merge of target module for UASP + BOT") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit 914a7b35 ] Currently, a NACK in slave mode is set/cleared when SCL is held low by the IP core right before the bit is about to be pushed out. This is too late for clearing and then a NACK from the previous byte is still used for the current one. Now, let's clear the NACK right after we detected the STOP condition following the NACK. Fixes: de20d185 ("i2c: rcar: add slave support") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Hou Pu authored
[ Upstream commit 2d62e6b0 ] REQ_FUA should be checked using rq->cmd_flags instead of req_op(). Fixes: deb78b41 ("nullb: emulate cache") Signed-off-by:
Hou Pu <houpu@bytedance.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tianjia Zhang authored
[ Upstream commit f34448cd ] On an error exit path, a negative error code should be returned instead of a positive return value. Fixes: e399441d ("nvme-fabrics: Add host support for FC transport") Cc: James Smart <jsmart2021@gmail.com> Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Rob Clark authored
[ Upstream commit f228af11 ] We need to set it to the most recent completed fence, not the most recent submitted. Otherwise we have races where we think we can retire submits that the GPU is not finished with, if the GPU doesn't manage to overwrite the seqno before we look at it. This can show up with hang recovery if one of the submits after the crashing submit also hangs after it is replayed. Fixes: f97decac ("drm/msm: Support multiple ringbuffers") Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Sean Young authored
[ Upstream commit ea8912b7 ] usleep_range() may take longer than the max argument due to scheduling, especially under load. This is causing random errors in the transmitted IR. Remove the usleep_range() in favour of busy-looping with udelay(). Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Zhi Chen authored
[ Upstream commit a1769bb6 ] This reverts commit 76d164f5. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by:
Zhi Chen <zhichen@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Andrey Konovalov authored
[ Upstream commit 2c547f9d ] When CONFIG_EFI is not enabled, we might get an undefined reference to efi_enter_virtual_mode() error, if this efi_enabled() call isn't inlined into start_kernel(). This happens in particular, if start_kernel() is annodated with __no_sanitize_address. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Ard Biesheuvel <ardb@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Petrova <lenaptr@google.com> Cc: Marco Elver <elver@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Walter Wu <walter-zh.wu@mediatek.com> Link: http://lkml.kernel.org/r/6514652d3a32d3ed33d6eb5c91d0af63bf0d1a0c.1596544734.git.andreyknvl@google.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Changming Liu authored
[ Upstream commit 2b53a192 ] The char buffer buf, receives data directly from user space, so its content might be negative and its elements are left shifted to form an unsigned integer. Since left shifting a negative value is undefined behavior, thus change the char to u8 to elimintate this UB. Signed-off-by:
Changming Liu <charley.ashbringer@gmail.com> Link: https://lore.kernel.org/r/20200711043018.928-1-charley.ashbringer@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit b648a513 ] The kernel test robot pointed out a slightly different error message after recent commit 5456ffde ("powerpc/spufs: simplify spufs core dumping") to spufs for a configuration that never worked: powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_proxydma_info_dump': >> file.c:(.text+0x4c68): undefined reference to `.dump_emit' powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_dma_info_dump': file.c:(.text+0x4d70): undefined reference to `.dump_emit' powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_wbox_info_dump': file.c:(.text+0x4df4): undefined reference to `.dump_emit' Add a Kconfig dependency to prevent this from happening again. Reported-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200706132302.3885935-1-arnd@arndb.deSigned-off-by:
-
David Brazdil authored
[ Upstream commit b38b298a ] __hyp_call_panic_nvhe contains inline assembly which did not declare its dependency on the __hyp_panic_string symbol. The static-declared string has previously been kept alive because of a use in __hyp_call_panic_vhe. Fix this in preparation for separating the source files between VHE and nVHE when the two users land in two different compilation units. The static variable otherwise gets dropped when compiling the nVHE source file, causing an undefined symbol linker error later. Signed-off-by:
David Brazdil <dbrazdil@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200625131420.71444-2-dbrazdil@google.comSigned-off-by:
-
Jason Baron authored
[ Upstream commit 709ed1bc ] The Intel uncore driver may claim some of the pci ids from ie31200 which means that the ie31200 edac driver will not initialize them as part of pci_register_driver(). Let's add a fallback for this case to 'pci_get_device()' to get a reference on the device such that it can still be configured. This is similar in approach to other edac drivers. Signed-off-by:
Jason Baron <jbaron@akamai.com> Cc: Borislav Petkov <bp@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Signed-off-by:
Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/1594923911-10885-1-git-send-email-jbaron@akamai.comSigned-off-by:
-
Javed Hasan authored
[ Upstream commit e95b4789 ] In fcoe_sysfs_fcf_del(), we first deleted the fcf from the list and then freed it if ctlr_dev was not NULL. This was causing a memory leak. Free the fcf even if ctlr_dev is NULL. Link: https://lore.kernel.org/r/20200729081824.30996-3-jhasan@marvell.comReviewed-by:
Girish Basrur <gbasrur@marvell.com> Reviewed-by:
Santosh Vernekar <svernekar@marvell.com> Reviewed-by:
Saurav Kashyap <skashyap@marvell.com> Reviewed-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
-
Xiubo Li authored
[ Upstream commit fa996773 ] Make sure the delayed work stopped before releasing the resources. cancel_delayed_work_sync() will only guarantee that the work finishes executing if the work is already in the ->worklist. That means after the cancel_delayed_work_sync() returns, it will leave the work requeued if it was rearmed at the end. That can lead to a use after free once the work struct is freed. Fix it by flushing the delayed work instead of trying to cancel it, and ensure that the work doesn't rearm if the mdsc is stopping. URL: https://tracker.ceph.com/issues/46293Signed-off-by:
Xiubo Li <xiubli@redhat.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Jing Xiangfeng authored
[ Upstream commit 68e12e5f ] If scsi_host_lookup() fails we will jump to put_host which may cause a panic. Jump to exit_set_fnode instead. Link: https://lore.kernel.org/r/20200615081226.183068-1-jingxiangfeng@huawei.comReviewed-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit a7f8b1c2 ] The incoming qgroup reserved space timing will move the data reservation to ordered extent completely. However in btrfs_punch_hole_lock_range() will call btrfs_invalidate_page(), which will clear QGROUP_RESERVED bit for the range. In current stage it's OK, but if we're making ordered extents handle the reserved space, then btrfs_punch_hole_lock_range() can clear the QGROUP_RESERVED bit before we submit ordered extent, leading to qgroup reserved space leakage. So here change the timing to make reserve data space after btrfs_punch_hole_lock_range(). The new timing is fine for either current code or the new code. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Chris Wilson authored
[ Upstream commit a7ef9b28 ] Though the number of lock-acquisitions is tracked as unsigned long, this is passed as the divisor to div_s64() which interprets it as a s32, giving nonsense values with more than 2 billion acquisitons. E.g. acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg ------------------------------------------------------------------------- 2350439395 0.07 353.38 649647067.36 0.-32 Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200725185110.11588-1-chris@chris-wilson.co.ukSigned-off-by:
-
Aditya Pakki authored
[ Upstream commit 990a1162 ] nouveau_connector_detect() calls pm_runtime_get_sync and in turn increments the reference count. In case of failure, decrement the ref count before returning the error. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit a2cdf395 ] nv50_disp_atomic_commit() calls calls pm_runtime_get_sync and in turn increments the reference count. In case of failure, decrement the ref count before returning the error. Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit bfad51c7 ] nouveau_fbcon_open() calls calls pm_runtime_get_sync() that increments the reference count. In case of failure, decrement the ref count before returning the error. Signed-off-by:
-
Li Guifu authored
[ Upstream commit 99c787cf ] During umount, f2fs_put_super() unregisters procfs entries after f2fs_destroy_segment_manager(), it may cause use-after-free issue when umount races with procfs accessing, fix it by relocating f2fs_unregister_sysfs(). [Chao Yu: change commit title/message a bit] Signed-off-by:
Li Guifu <bluce.liguifu@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Ikjoon Jang authored
[ Upstream commit 68f775dd ] Add HID_QUIRK_NOGET for Logitech GROUP device. Logitech GROUP is a compound with camera and audio. When the HID interface in an audio device is requested to get specific report id, all following control transfers are stalled and never be restored back. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203419Signed-off-by:
Ikjoon Jang <ikjn@chromium.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 6c42227c ] Fix this smatch warning: drivers/media/cec/core/cec-api.c:156 cec_adap_g_log_addrs() warn: check that 'log_addrs' doesn't leak information (struct has a hole after 'features') Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Peng Fan authored
[ Upstream commit a859647b ] Close "fd" before the return of map_vdso() and close "out_file" in main(). Signed-off-by:
Peng Fan <fanpeng@loongson.cn> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Reto Schneider authored
[ Upstream commit 03128643 ] If usb_submit_urb fails the allocated urb should be unanchored and released. Signed-off-by:
Reto Schneider <code@reto-schneider.ch> Signed-off-by:
-
Yangbo Lu authored
[ Upstream commit 5656bb38 ] The timer fixed interval period pulse generator register is used to generate periodic pulses. The down count register loads the value programmed in the fixed period interval (FIPER). At every tick of the timer accumulator overflow, the counter decrements by the value of TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down counter value reaches zero. It reloads the down counter in the cycle following a pulse. To use the TMR_FIPER register to generate desired periodic pulses. The value should programmed is, desired_period - tclk_period Current tmr-fiper2 value is to generate 100us periodic pulses. (But the value should have been 99995, not 99990. The tclk_period is 5.) This patch is to generate 1 second periodic pulses with value 999999995 programmed which is more desired by user. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Qiushi Wu authored
[ Upstream commit 8a94644b ] kobject_init_and_add() takes a reference even when it fails. If it returns an error, kobject_put() must be called to clean up the memory associated with the object. When kobject_init_and_add() fails, call kobject_put() instead of kfree(). b8eb7183 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") fixed a similar problem. Link: https://lore.kernel.org/r/20200528021322.1984-1-wu000273@umn.eduSigned-off-by:
Qiushi Wu <wu000273@umn.edu> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 78c2ce9b ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200614030528.128064-1-pakki001@umn.eduSigned-off-by:
-
