Both calls to of_find_node_by_name() and of_get_next_child() return a
node pointer with refcount incremented thus it must be explicidly
decremented here after the last usage. As we are assured to have a
refcounted  np  either from the initial
of_find_node_by_name(NULL, name); or from the of_get_next_child(gpio, np)
in the while loop if we reached the error code path below, an
x of_node_put(np) is needed.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: commit f3d9478b ("[ALSA] snd-aoa: add snd-aoa")
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When i915 component binding fails, it means that HDMI isn't applicable
anyway.  Although the probe with the generic HDMI parser would still
work, it's essentially useless, hence better to be left unbound.

This patch mimics the probe_id field at failing the i915 component
binding so that the generic HDMI won't be bound after that.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch can make audio controller in AMD Raven Ridge gets runtime
suspended to D3, to save ~1W power when it's not in use.

Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The in_pm atomic in hdac_device is an important field used as a flag
as well as a refcount for PM.  The existing snd_hdac_power_up/down
helpers already refer to it in the HD-audio core code, while the code
to actually setting the value (atomic_inc() / _dec()) is open-coded in
HDA legacy side, which is hard to find.

This patch adds the helper functions to set/reset the in_pm counter to
HDA core and use them in HDA legacy side, for making it clearer who /
where the PM is managed.

There is no functional changes, just code refactoring.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

hdmi_lpe_audio_probe() copies the pcm name string via strncpy(), but
as a gcc8 warning suggests, it misses a NUL terminator, and unlikely
the expected result.

Use the proper one, strlcpy() instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd_hda_codec_update_cache() used to serve for a slightly different
purpose from snd_hdac_write_cache(), but now both of them became
identical.

Let's unify and replace with the latter one consistently.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

More comprehensive list of model strings for ALC882 & co.

Also corrected the subsection in models.rst, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added a few missing entries for ALC262 model strings.
All about specific hardwares.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the missing entry for ALC268 model strings.
Only "spdif" was missing, and that's it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Like the previous commit for ALC662, let's give more comprehensive
list of model entries for ALC269 & co as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALC662 and others have far more fixup entries than the model table.
Let's add more model string entries so that user can test / debug
without compiling kernels at each time.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now that the documentation/script file got restored, fix the
references within the Kernel tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The modules for the cards described here changed their names.
Update accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The script is old and produce some warnings and errors, because
it lacks including stdlib.h and io.h is at sys/io.h.

Fix it to run with the tools found on modern Linux distros.

Tested building it on Fedora 28.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This script is mentioned at multisound Kconfig and files. As the
driver still exists, it probably makes sense to restore it.

Fixes: 727dede0 ("sound: Retire OSS")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently patch_alc269() calls the fixup with HDA_FIXUP_ACT_PRE_PROBE
before setting up the codec model-specific setups (e.g. setting
codec_variant or mixer_nid setup).  This is rather confusing as others
do call the *_PRE_PROBE fixup after such a setup.  Due to this
disorder, we have to override spec->shutup not at the usual
HDA_FIXUP_ACT_PRE_PROBE but the unusual HDA_FIXUP_ACT_PROBE time.

This patch corrects the fixup call orders in patch_alc269(), and also
corrects the action to set up spec->shutup accordingly.

No functional changes but just refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In this patch, the remaining static init verbs in VIA codec driver are
converted to the standard snd_hda_add_verbs() calls.  The conversion
is straightforward, but one change to be noted is the place of calls:
since these verbs are supposed to be executed at the beginning of the
init / resume procedure, we need to add snd_hda_add_verbs() calls
before calling the other parsers.

This is merely a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch replaces the control element creations in VIA codec driver
with the standard snd_hda_gen_add_kctl() calls as a cleanup.  There
are two major fields targeted by this patch: the beep controls and
static init controls.

The former is converted just like other codec drivers do.  The
spec->beep_amp field can be eliminated by this change as well.

The latter, static init controls, are replaced simply with explicit
snd_hda_gen_add_kctl() calls.

After these conversions, via_build_controls() becomes superfluous and
replaced with snd_hda_gen_build_controls(), too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently VIA codec driver invokes via_free() at each place of the
error path.  Move the error handling to the end of each function
commonly and do goto-error as a standard idiom.

This is a preliminary patch for the further cleanups, and no
functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch moves the mixer creation code in Cirrus codec driver from
its own build_controls callback to snd_hda_gen_add_kctl() for
simplification.

As a bonus, this allows us to remove the cs421x_build_controls as it
becomes identical with snd_hda_gen_build_controls().
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Like the previous commit for Realtek codec, the similar cleanup work
can be applied to Conexant codec, too.  A slight difference is that
the call of cx_auto_parse_beep() is moved after
snd_hda_gen_parse_auto_config().  It's not strictly needed, but it'd
be good to make the creation of such beep mixers at the end, which
matches with the former situation.

Along with this conversion, cx_auto_build_controls() becomes just
calling snd_hda_gen_build_controls(), so it's simply replaced with
snd_hda_gen_build_controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In the Realtek codec driver, we used to build kctl elements for beep
mixer in the own build_controls callback.  This is an open-code and
can be covered by the standard feature of the generic parser with
snd_hda_gen_add_kctl() instead.

Also, after the conversion, spec->beep_amp becomes superfluous; hence
it's removed along with the conversion.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The beep mixer controls are the only remaining stuff that uses
spec->mixers[] array, and they can be well converted to the standard
helper in the generic parser, snd_hda_gen_add_kctl().

This simplifies the code, especially the superfluous mixers and
num_mixers fields can be now removed from alc_spec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The ALC660VD_FIX_ASUS_GPIO1 quirk requires to set up GPIO bit0 ON
while bit 1 OFF.  Implement the fixup function and convert from the
static init verbs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Dell XPS13 has multi-step fixups, and one of them
(ALC288_FIXUP_DELL_XPS_13_GPIO6) corresponds to the management of GPIO
bit6 (0x40).  It used to be a static init verbs (to turn *off* the
bit6).

In this patch, we convert it as the gpio_mask and gpio_dir
initializations folded in the existing fixup function.  With this
change, ALC288_FIXUP_DELL_XPS_13_GPIO6 becomes superfluous, thus it's
removed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch converts the remaining static init verbs for GPIO bits with
the common gpio_* fields management.  Only the verbs setting the GPIO
data bits are targeted in this patch.  The rest will be changed in
later patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now we can simplify the mute LED GPIO handling as well.  Each fixup
dealing with GPIO for the mute LED controls defined the static init
verbs, and they are converted to the common GPIO bit fields with the
new helper, alc_fixup_hp_gpio_led().
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The fixup for Macbook Pro is nothing but setting the GPIO bits as
usual but with one exception: it adds some delay at writing the GPIO
bits.

Add a flag to put the conditional delay in the common helper, and
clean up alc885_fixup_macpro_gpio() with the new flag.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Until now, two fields, gpio_data and gpio_led, coexist in alc_spec
although basically both of them serve for the same purpose -- the GPIO
data bits.

This patch consolidates both usages and eliminates the superfluous
gpio_led field.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For updating GPIO bits dynamically, provide a new helper, and use it
from the alc260 automute hook.  This helper will be used by other
places in future, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently the GPIO bits are managed by individual verbs in some cases
while toggled dynamically in other cases.  For simplifying the GPIO
management, define the GPIO mask, dir and data bits in alc_spec
fields, and refer to / set them consistently from all places.

As a first step, along with the definition of the new gpio_* fields,
this patch replaces the static verbs that are used at initialization
and fixups with the common helper functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some devices have the overrides of spec->init_amp at
HDA_FIXUP_ACT_PROBE just because alc_ssid_check() gives the
false-positive values from the SSID.

For more consistent behavior, define the logic in the following way:

- Define ALC_INIT_UNDEFINED as the default value before calling
  alc_ssid_check()
- Each fixup may set up spec->init_amp with another value at
  HDA_FIXUP_ACT_PRE_PROBE
- At detection, check whether spec->init_amp is ALC_INIT_UNDEFINED or
  not; if it's different, we skip the detection

Also, it turned out that ASUS TX300 requires the spec->init_amp
override, too; currently it ignores the GPIO bits implicitly by its
static init verb, but this will be changed in the later patchset.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a devicetree binding for codecs. This is especially useful if the
AC97 bitclk clock is provided by the codec, as it has to be described in
the devicetree description for the ac97 bus code to aquire it.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the generic ac97 bus binding, especially for ac97 codecs discovered
by ac97 hardware probing.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

alc269_fixup_hp_line1_mic1_led() can be simplified more with the
existing helper code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

There are a couple of places setting cap_sync_hook in the codec
drivers, and they just overwrite the value.  Add a sanity check via
WARN_ON() in case if an old non-NULL value is overridden and
forgotten.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

To simplify the code and to get the mic-mute LED behavior control, use
the new helper function for controlling the mic mute LED instead of
open-codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of refusing, allow the configuration with the multiple ADCs
(thus multiple capture switches) for enabling the mic mute LED.
This has been done for Sigmatel/IDT codecs, and we treat the OR-ed
values from all capture switches as the boolean condition.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Convert to use the common helper for controlling the mic mute LED for
HP laptops, just as we've done for Realtek codecs.  This will give the
mic mute LED enum as gratis.
Signed-off-by: Takashi Iwai <tiwai@suse.de>