- 20 Nov, 2014 31 commits
-
-
Finn Thain authored
The #defines in sun3_scsi.h are intended to influence subsequent #includes in sun3_scsi.c. IMHO, that's too convoluted. Move sun3_scsi.h macro definitions to sun3_scsi.c, consistent with other NCR5380 drivers. Omit the unused NCR5380_local_declare() and NCR5380_setup() macros. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Finn Thain authored
Convert sun3_scsi to platform device and eliminate scsi_register(). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Finn Thain authored
The #defines in atari_scsi.h are intended to influence subsequent #includes in atari_scsi.c. IMHO, that's too convoluted. Remove atari_scsi.h by moving those macro definitions to atari_scsi.c, consistent with other NCR5380 drivers. Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Finn Thain authored
Convert atari_scsi to platform device and eliminate scsi_register(). Validate __setup options later on so that module options are checked as well. Remove the comment about the scsi mid-layer disabling the host irq as it is no longer true (AFAICT). Also remove the obsolete slow interrupt stuff (IRQ_TYPE_SLOW == 0 anyway). Signed-off-by:
-
Finn Thain authored
Don't disable irqs when waiting for the ST DMA "lock"; its release may require an interrupt. Introduce stdma_try_lock() for use in soft irq context. atari_scsi now tells the SCSI mid-layer to defer queueing a command if the ST DMA lock is not available, as per Michael's patch: http://marc.info/?l=linux-m68k&m=139095335824863&w=2 The falcon_got_lock variable is race prone: we can't disable IRQs while waiting to acquire the lock, so after acquiring it there must be some interval during which falcon_got_lock remains false. Introduce stdma_is_locked_by() to replace falcon_got_lock. The falcon_got_lock tests in the EH handlers are incorrect these days. It can happen that an EH handler is called after a command completes normally. Remove these checks along with falcon_got_lock. Also remove the complicated and racy fairness wait queues. If fairness is an issue (when SCSI competes with IDE for the ST DMA interrupt), the solution is likely to be a lower value for host->can_queue. Signed-off-by:
-
Finn Thain authored
Convert mac_scsi to platform device and eliminate scsi_register(). Platform resources for chip registers now follow the documentation. This should fix issues with the Mac IIci (and possibly other models too). Signed-off-by:
-
Finn Thain authored
Fix whitespace, remove pointless volatile qualifiers and improve code style by use of INPUT_DATA_REG and OUTPUT_DATA_REG macros. Signed-off-by:
-
Finn Thain authored
Allow mac_scsi to be built as a module. Replace the old validation of __setup options with code that validates both module and __setup options. Signed-off-by:
-
Finn Thain authored
The #defines in mac_scsi.h are intended to influence subsequent #includes in mac_scsi.c. IMHO, that's too convoluted. Remove mac_scsi.h by moving those macro definitions to mac_scsi.c, consistent with other NCR5380 drivers. Signed-off-by:
-
Finn Thain authored
Testing shows that the Domex 3191D card never asserts its IRQ. Hence it is non-functional with Linux (worse, the EH bugs in the core driver are fatal but that's a problem for another patch). Perhaps the DT-536 chip needs special setup? I can't find documentation for it. The NetBSD driver uses polling apparently because of this issue. Set host->irq = NO_IRQ so the core driver will prevent targets from disconnecting. Don't request host->irq. Signed-off-by:
-
Finn Thain authored
Convert Scsi_Cmnd to struct scsi_cmnd and drop the #include "scsi.h". The sun3_NCR5380.c core driver already uses struct scsi_cmnd so converting the other core drivers reduces the diff which makes them easier to unify. Signed-off-by:
-
Finn Thain authored
The *_RELEASE macros don't tell me anything. In some cases the version in the macro contradicts the version in the comments. Anyway, the Linux kernel version is sufficient information. Remove these macros to improve readability. Signed-off-by:
-
Finn Thain authored
Compile-time override of scsi host defaults is pointless for drivers that provide module parameters and __setup options for that. Too many macros make the code hard to read so remove them. Signed-off-by:
-
Finn Thain authored
Static variables from dtc.c and pas16.c should not appear in the core NCR5380.c driver. Aside from being a layering issue this worsens the divergence between the three core driver variants (atari_NCR5380.c and sun3_NCR5380.c don't support PSEUDO_DMA) and it can mean multiple hosts share the same counters. Fix this by making the pseudo DMA spin counters in the core more generic. This also avoids the abuse of the {DTC,PAS16}_PUBLIC_RELEASE macros, so they can be removed. oak.c doesn't use PDMA and hence it doesn't use the counters and hence it needs no write_info() method. Remove it. Signed-off-by: -
Finn Thain authored
If the host->info() method is not set, then host->name is used by default. For atari_scsi, that is exactly the same text. So remove the redundant info() method. Keep sun3_scsi.c in line with atari_scsi. Some NCR5380 drivers return an empty string from the info() method (arm/cumana_1.c arm/oak.c mac_scsi.c) while other drivers use the default (dmx3191d dtc.c g_NCR5380.c pas16.c t128.c). Implement a common info() method to replace a lot of duplicated code which the various drivers use to announce the same information. This replaces most of the (deprecated) show_info() output and all of the NCR5380_print_info() output. This also eliminates a bunch of code in g_NCR5380 which just duplicates functionality in the core driver. Signed-off-by:
-
Finn Thain authored
The NCR5380_STATS option is only enabled by g_NCR5380 yet it adds clutter to all three core drivers. The atari_NCR5380.c and sun3_NCR5380.c core drivers have a slightly different implementation of the NCR5380_STATS option. Out of all ten NCR5380 drivers, only one of them (g_NCR5380) actually has the code to report on the collected stats. Aside from being unreadable, that code seems to be broken because there's no initialization of timebase. sun3_NCR5380.c and atari_NCR5380.c have the timebase initialization but lack the code to report the stats. Remove all of this code to improve readability and reduce divergence between the three core drivers. This patch and the next one completely eliminate the PRINTP and ANDP pre-processor abuse. Signed-off-by:
-
Finn Thain authored
Oak scsi doesn't use any IRQ, but it sets irq = IRQ_NONE rather than SCSI_IRQ_NONE. Problem is, the core NCR5380 driver expects SCSI_IRQ_NONE if it is to issue IDENTIFY commands that prevent target disconnection. And, as Geert points out, IRQ_NONE is part of enum irqreturn. Other drivers, when they can't get an IRQ or can't use one, will set host->irq = SCSI_IRQ_NONE (that is, 255). But when they exit they will attempt to free IRQ 255 which was never requested. Fix these bugs by using NO_IRQ in place of SCSI_IRQ_NONE and IRQ_NONE. That means IRQ 0 is no longer probed by ISA drivers but I don't think this matters. Setting IRQ = 255 for these ISA drivers is understood to mean no IRQ. This remains supported so as to avoid breaking existing ISA setups (which can be difficult to get working) and because existing documentation (SANE, TLDP etc) describes this usage for the ISA NCR5380 driver options. Signed-off-by:
-
Finn Thain authored
The LIMIT_TRANSFERSIZE, PSEUDO_DMA, PARITY and UNSAFE options are all documented in the core drivers where they are used. The same goes for the chip databook reference. Remove the duplicate comments. Signed-off-by:
-
Finn Thain authored
Every NCR5380 driver sets AUTOSENSE so it need not be optional (and the mid-layer expects it). Remove this redundant macro to improve readability. Signed-off-by:
-
Finn Thain authored
Both atari_NCR5380.c and sun3_NCR5380.c core drivers #undef TAG_NONE and then redefine it. But the original definition is unused because NCR5380.c lacks support for tagged queueing. So just define it once. The TAG_NEXT macro only appears in the arguments to NCR5380_select() calls. But that routine doesn't use its tag argument as the tag was already assigned in NCR5380_main(). So remove the unused argument and the macro. Signed-off-by:
-
Finn Thain authored
Make use of the host template static initializer instead of assigning handlers at run-time. Move __maybe_unused qualifiers from declarations to definitions. Move the atari_scsi_bus_reset() wrapper after the definition of NCR5380_bus_reset(). All of the host template handler prototypes are now redundant so remove them. The write_info() handler is only relevant to drivers using PSEUDO_DMA so this patch fixes the compiler warning in atari_NCR5380.c and sun3_NCR5380.c: CC drivers/scsi/atari_scsi.o drivers/scsi/NCR5380.h:329: warning: 'NCR5380_write_info' declared 'static' but never defined Signed-off-by:
-
Finn Thain authored
Add missing static qualifiers and remove the now pointless prototypes. The NCR5380_* prototypes are all declared in NCR5380.h and renamed using macros. Further declarations are redundant (some are completely unused). Remove them. Signed-off-by:
-
Finn Thain authored
Some macros are never evaluated (i.e. FOO, USLEEP, SCSI2 and USE_WRAPPER; and in some drivers, NCR5380_intr and NCR5380_proc_info). DRIVER_SETUP serves no purpose anymore. Remove these macro definitions. Signed-off-by:
-
Finn Thain authored
Some __setup() options mentioned in Documentation/scsi don't work because a few lines of code went missing sometime since Linux 2.4. Fix the options and thus fix some compiler warnings for both the non-modular case, CC drivers/scsi/dtc.o drivers/scsi/dtc.c:176:20: warning: 'dtc_setup' defined but not used [-Wunused-function] and the modular case, CC [M] drivers/scsi/pas16.o drivers/scsi/pas16.c:335:20: warning: 'pas16_setup' defined but not used [-Wunused-function] CC [M] drivers/scsi/t128.o drivers/scsi/t128.c:147:20: warning: 't128_setup' defined but not used [-Wunused-function] Signed-off-by: -
Finn Thain authored
Remove unused fields from hostdata structs declared with the NCR5380_implementation_fields macro. Signed-off-by:
-
Finn Thain authored
Having defined NDEBUG, and having set the console log level, I'd like to see some output. Don't use pr_debug(), it's annoying to have to define DEBUG as well. Signed-off-by:
-
Hiral Shah authored
When issuing I/O request, if the I/O completes before returning from fnic_queuecommand(), we may be referencing scsi_cmnd structure that may be freed by interrupt handler. Acquring IO lock would synchronize fnic_queuecommand and interrupt handler. - Increment fnic version from 1.6.0.15 to 1.6.0.16 Signed-off-by:
Hiral Shah <hishah@cisco.com> Signed-off-by:
Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by:
Anil Chintalapati <achintal@cisco.com> Signed-off-by:
-
Hiral Shah authored
When physical link between standalone C series and switch is down, the fip timer is not turned off and timer expiration will keep sending vlan request. It can be fixed by stopping the fip_timer and it will be restarted automatically when Link is up. - Increment fnic version from 1.6.0.14 to 1.6.0.15 Signed-off-by:
-
Hiral Shah authored
IOs belonging to an rport are aborted with Internal terminate option when rport goes offline. Any new IO issued to the rport during this time can reuse the terminated exchange which will cause inconsistent state of the exchange between local port and remote port. fc_rport_priv is set to RPORT_ST_DELETE before exchanges are aborted by libfc. Not issuing amy more I/O requests when RPORT_ST_DELETE is set, will avoid inconsistent state of the exchange between local port and remote port. - Increment fnic version from 1.6.0.13 to 1.6.0.14 Signed-off-by:
-
Hiral Shah authored
In case of receive path, we do not have eth header or fcoe header available when we take a trace so we fill the fc trace buffer with 0xff for both values. We copy only mimimum of received data or trace buffer size - fc header - eth and fcoe header - Increment fnic version from 1.6.0.12 to 1.6.0.13 Signed-off-by:
-
Hiral Shah authored
In fnic_dev_wait, Wait for finish to complete at least three times in two seconds while loop before returning -ETIMEDOUT as sometime schedule_timeout_uninterruptible takes more than two seconds to wake up. - Increment fnic version from 1.6.0.11 to 1.6.0.12 Signed-off-by:
-
- 12 Nov, 2014 9 commits
-
-
Dan Carpenter authored
We should be returning an error code here instead of success. Either -ENODEV or -ENOMEM would work. There is also a failure message in printk(). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
-
Dan Carpenter authored
The bnx2fc_if_create() function returns NULL on failure, it never returns an error pointer. Signed-off-by:
-
Bart Van Assche authored
At least LID reassignment can trigger a race condition in the SRP initiator driver, namely the receive completion handler trying to post a request on a QP during or after QP destruction and before the CQ's have been destroyed. Avoid this race by modifying a QP into the error state and by waiting until all receive completions have been processed before destroying a QP. Reported-by:
Max Gurtuvoy <maxg@mellanox.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
Improve performance by using multiple RDMA/RC channels per SCSI host for communication with an SRP target. About the implementation: - Introduce a loop over all channels in the code that uses target->ch. - Set the SRP_MULTICHAN_MULTI flag during login for the creation of the second and subsequent channels. - RDMA completion vectors are chosen such that RDMA completion interrupts are handled by the CPU socket that submitted the I/O request. As one can see in this patch it has been assumed if a system contains n CPU sockets and m RDMA completion vectors have been assigned to an RDMA HCA that IRQ affinity has been configured such that completion vectors [i*m/n..(i+1)*m/n) are bound to CPU socket i with 0 <= i < n. - Modify srp_free_ch_ib() and srp_free_req_data() such that it becomes safe to invoke these functions after the corresponding allocation function failed. - Add a ch_count sysfs attribute per target port. Signed-off-by:
-
Bart Van Assche authored
Since the block layer already contains functionality to assign a tag to each request, use that functionality instead of reimplementing that functionality in the SRP initiator driver. This change makes the free_reqs list superfluous. Hence remove that list. [hch: updated to use .use_blk_tags instead scsi_activate_tcq] Signed-off-by:
-
Bart Van Assche authored
Changes in this patch: - Move channel variables into a new structure (struct srp_rdma_ch). - Add an srp_target_port pointer, 'lock' and 'comp_vector' members in struct srp_rdma_ch. - Add code to initialize these three new member variables. - Many boring "target->" into "ch->" changes. - The cm_id and completion handler context pointers are now of type srp_rdma_ch * instead of srp_target_port *. - Three kzalloc(a * b, f) calls have been changed into kcalloc(a, b, f) to avoid that this patch would trigger a checkpatch warning. - Two casts from u64 into unsigned long long have been left out because these are superfluous. Since considerable time u64 is defined as unsigned long long for all architectures supported by the Linux kernel. Signed-off-by:
-
Bart Van Assche authored
Introduce the srp_target_port member variables 'sgid' and 'pkey'. Change the type of 'orig_dgid' from __be16[8] into union ib_gid. This patch does not change any functionality but makes the "Separate target and channel variables" patch easier to verify. Signed-off-by:
-
Bart Van Assche authored
If a cable is pulled during LUN scanning it can happen that the SRP rport and the SCSI host have been created but no LUNs have been added to the SCSI host. Since multipathd only sends SCSI commands to a SCSI target if one or more SCSI devices are present and since there is no keepalive mechanism for IB queue pairs this means that after a LUN scan failed and after a reconnect has succeeded no data will be sent over the QP and hence that a subsequent cable pull will not be detected. Avoid this by not creating an rport or SCSI host if a cable is pulled during a SCSI LUN scan. Note: so far the above behavior has only been observed with the kernel module parameter ch_count set to a value >= 2. Signed-off-by:
-
Bart Van Assche authored
Attempting to connect three times may be insufficient after an initiator system tries to relogin, especially if the relogin attempt occurs before the SRP target service ID has been registered. Since the srp_daemon retries a failed login attempt anyway, remove the stale connection retry mechanism. Signed-off-by:
-
