Skip to content

L
linux
Switch branch/tag
  1. 13 Nov, 2015 31 commits
  3. 12 Nov, 2015 3 commits
  5. 30 Oct, 2015 1 commit
  7. 28 Oct, 2015 1 commit
    • Filipe Manana's avatar
      Btrfs: update fix for read corruption of compressed and shared extents · df1cdc0e
      Filipe Manana authored 
      commit 808f80b4 upstream.

My previous fix in commit 005efedf ("Btrfs: fix read corruption of
compressed and shared extents") was effective only if the compressed
extents cover a file range with a length that is not a multiple of 16
pages. That's because the detection of when we reached a different range
of the file that shares the same compressed extent as the previously
processed range was done at extent_io.c:__do_contiguous_readpages(),
which covers subranges with a length up to 16 pages, because
extent_readpages() groups the pages in clusters no larger than 16 pages.
So fix this by tracking the start of the previously processed file
range's extent map at extent_readpages().

The following test case for fstests reproduces the issue:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_cloner

  rm -f $seqres.full

  test_clone_and_read_compressed_extent()
  {
      local mount_opts=$1

      _scratch_mkfs >>$seqres.full 2>&1
      _scratch_mount $mount_opts

      # Create our test file with a single extent of 64Kb that is going to
      # be compressed no matter which compression algo is used (zlib/lzo).
      $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 64K" \
          $SCRATCH_MNT/foo | _filter_xfs_io

      # Now clone the compressed extent into an adjacent file offset.
      $CLONER_PROG -s 0 -d $((64 * 1024)) -l $((64 * 1024)) \
          $SCRATCH_MNT/foo $SCRATCH_MNT/foo

      echo "File digest before unmount:"
      md5sum $SCRATCH_MNT/foo | _filter_scratch

      # Remount the fs or clear the page cache to trigger the bug in
      # btrfs. Because the extent has an uncompressed length that is a
      # multiple of 16 pages, all the pages belonging to the second range
      # of the file (64K to 128K), which points to the same extent as the
      # first range (0K to 64K), had their contents full of zeroes instead
      # of the byte 0xaa. This was a bug exclusively in the read path of
      # compressed extents, the correct data was stored on disk, btrfs
      # just failed to fill in the pages correctly.
      _scratch_remount

      echo "File digest after remount:"
      # Must match the digest we got before.
      md5sum $SCRATCH_MNT/foo | _filter_scratch
  }

  echo -e "\nTesting with zlib compression..."
  test_clone_and_read_compressed_extent "-o compress=zlib"

  _scratch_unmount

  echo -e "\nTesting with lzo compression..."
  test_clone_and_read_compressed_extent "-o compress=lzo"

  status=0
  exit
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Tested-by: default avatarTimofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      df1cdc0e
  9. 27 Oct, 2015 4 commits
    • Wilson Kok's avatar
      fib_rules: fix fib rule dumps across multiple skbs · 41913c42
      Wilson Kok authored 
      [ Upstream commit 41fc0143 ]

dump_rules returns skb length and not error.
But when family == AF_UNSPEC, the caller of dump_rules
assumes that it returns an error. Hence, when family == AF_UNSPEC,
we continue trying to dump on -EMSGSIZE errors resulting in
incorrect dump idx carried between skbs belonging to the same dump.
This results in fib rule dump always only dumping rules that fit
into the first skb.

This patch fixes dump_rules to return error so that we exit correctly
and idx is correctly maintained between skbs that are part of the
same dump.
Signed-off-by: default avatarWilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      41913c42
    • Jesse Gross's avatar
      openvswitch: Zero flows on allocation. · 670207f0
      Jesse Gross authored 
      [ Upstream commit ae5f2fb1 ]

When support for megaflows was introduced, OVS needed to start
installing flows with a mask applied to them. Since masking is an
expensive operation, OVS also had an optimization that would only
take the parts of the flow keys that were covered by a non-zero
mask. The values stored in the remaining pieces should not matter
because they are masked out.

While this works fine for the purposes of matching (which must always
look at the mask), serialization to netlink can be problematic. Since
the flow and the mask are serialized separately, the uninitialized
portions of the flow can be encoded with whatever values happen to be
present.

In terms of functionality, this has little effect since these fields
will be masked out by definition. However, it leaks kernel memory to
userspace, which is a potential security vulnerability. It is also
possible that other code paths could look at the masked key and get
uninitialized data, although this does not currently appear to be an
issue in practice.

This removes the mask optimization for flows that are being installed.
This was always intended to be the case as the mask optimizations were
really targetting per-packet flow operations.

Fixes: 03f0d916 ("openvswitch: Mega flow implementation")
Signed-off-by: default avatarJesse Gross <jesse@nicira.com>
Acked-by: default avatarPravin B Shelar <pshelar@nicira.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      670207f0
    • Daniel Borkmann's avatar
      netlink, mmap: transform mmap skb into full skb on taps · 8bdaf157
      Daniel Borkmann authored 
      [ Upstream commit 1853c949 ]

Ken-ichirou reported that running netlink in mmap mode for receive in
combination with nlmon will throw a NULL pointer dereference in
__kfree_skb() on nlmon_xmit(), in my case I can also trigger an "unable
to handle kernel paging request". The problem is the skb_clone() in
__netlink_deliver_tap_skb() for skbs that are mmaped.

I.e. the cloned skb doesn't have a destructor, whereas the mmap netlink
skb has it pointed to netlink_skb_destructor(), set in the handler
netlink_ring_setup_skb(). There, skb->head is being set to NULL, so
that in such cases, __kfree_skb() doesn't perform a skb_release_data()
via skb_release_all(), where skb->head is possibly being freed through
kfree(head) into slab allocator, although netlink mmap skb->head points
to the mmap buffer. Similarly, the same has to be done also for large
netlink skbs where the data area is vmalloced. Therefore, as discussed,
make a copy for these rather rare cases for now. This fixes the issue
on my and Ken-ichirou's test-cases.

Reference: http://thread.gmane.org/gmane.linux.network/371129
Fixes: bcbde0d4 ("net: netlink: virtual tap device management")
Reported-by: default avatarKen-ichirou MATSUZAWA <chamaken@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Tested-by: default avatarKen-ichirou MATSUZAWA <chamaken@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      8bdaf157
    • Richard Laing's avatar
      net/ipv6: Correct PIM6 mrt_lock handling · f4eceb16
      Richard Laing authored 
      [ Upstream commit 25b4a44c ]

In the IPv6 multicast routing code the mrt_lock was not being released
correctly in the MFC iterator, as a result adding or deleting a MIF would
cause a hang because the mrt_lock could not be acquired.

This fix is a copy of the code for the IPv4 case and ensures that the lock
is released correctly.
Signed-off-by: default avatarRichard Laing <richard.laing@alliedtelesis.co.nz>
Acked-by: default avatarCong Wang <cwang@twopensource.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
      f4eceb16
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7