wb_kupdate() function has a bug on linux-2.6.30-rc5.  This bug causes
generic_sync_sb_inodes() to start to write inodes back much earlier than
our expectations because it miscalculates oldest_jif in wb_kupdate().

This bug was introduced in 704503d8
('mm: fix proc_dointvec_userhz_jiffies "breakage"').
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: padlock - Revert aes-all alias to aes
  crypto: api - Fix algorithm module auto-loading
  crypto: eseqiv - Fix IV generation for sync algorithms
  crypto: ixp4xx - check firmware for crypto support

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: check sysdev_suspend(PMSG_FREEZE) return value

This adds CONFIG_REISERFS_FS_XATTR protection from reiserfs_permission.

This is needed to avoid warnings during file deletions and chowns with
xattrs disabled.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This avoids an Oops in open_xa_root that can occur when deleting a file
with xattrs disabled.  It assumes that the xattr root will be there, and
that is not guaranteed.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With xattr cleanup even with xattrs disabled, much of the initial setup
is still performed.  Some #ifdefs are just not needed since the options
they protect wouldn't be available anyway.

This cleans those up.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  mm: SLOB fix reclaim_state
  mm: SLUB fix reclaim_state
  slub: add Documentation/ABI/testing/sysfs-kernel-slab
  slub: enforce MAX_ORDER

Ian Campbell noticed that since "Eliminate thousands of warnings with
gcc 3.2 build" (commit 57adc4d2) all
WARN_ON()'s currently appear to come from warn_slowpath_null(), eg:

  WARNING: at kernel/softirq.c:143 warn_slowpath_null+0x1c/0x20()

because now that warn_slowpath_null() is in the call path, the
__builtin_return_address(0) returns that, rather than the place that
caused the warning.

Fix this by splitting up the warn_slowpath_null/fmt cases differently,
using a common helper function, and getting the return address in the
right place.  This also happens to avoid the unnecessary stack usage for
the non-stdargs case, and just generally cleans things up.

Make the function name printout use %pS while at it.

Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  piix: The Sony TZ90 needs the cable type hardcoding
  icside: register second channel of version 6 PCB
  ide-tape: remove back-to-back REQUEST_SENSE detection

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Idle C-states disabled by max_cstate should not disable the TSC
  ACPI: idle: fix init-time TSC check regression
  ACPI processor: reset the throttling state once it's invalid
  ACPI processor: introduce module parameter processor.ignore_tpc
  ACPI, i915: build fix
  ACPI: suspend: restore BM_RLD on resume
  ACPI: resume: re-enable SCI-enable workaround
  thermal: fix off-by-1 error in trip point trigger condition
  eeepc-laptop: unregister_rfkill_notifier on failure
  asus-laptop: fix input keycode
  eeepc-laptop: support for super hybrid engine (SHE)
  eeepc-laptop: Work around rfkill firmware bug
  eeepc-laptop: report brightness control events via the input layer
  eeepc-laptop: fix wlan rfkill state change during init
  ACPI: suspend: don't let device _PS3 failure prevent suspend
  ACPI: power: update error message
  ACPI: video: DMI workaround another broken Acer BIOS enabling display brightness
  ACPICA: use acpi.* modparam namespace
  ACPI video: dmi check for broken _BQC on Acer Aspire 5720

The Sony TZ90 needs the cable type hardcoding. See bug #12734
Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Jonathan E. Snow <jesnow@uh.edu>
[bart: port it from ata_piix to piix and give reporter the proper credit]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The second IDE channel of version 6 PCB is not being registered anymore since
the commit 48c3c107 (ide: add struct ide_host
(take 3)).
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Impact: fix an oops which always triggers

ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when
checking for back-to-back request sense issues but drive->pc can be
NULL and even when it's not NULL, it's not safe to dereference it once
the previous command is complete because pc could have been freed or
was on stack.  Kill back-to-back REQUEST_SENSE detection.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', 'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release

Processor idle power states C2 and C3 stop the TSC on many machines.
Linux recognizes this situation and marks the TSC as unstable:

Marking TSC unstable due to TSC halts in idle

But if those same machines are booted with "processor.max_cstate=1",
then there is no need to validate C2 and C3, and no need to
disable the TSC, which can be reliably used as a clocksource.
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

A previous 2.6.30 patch, a71e4917,
(ACPI: idle: mark_tsc_unstable() at init-time, not run-time)
erroneously disabled the TSC on systems that did not actually
have valid deep C-states.

Move the check after the deep-C-states are validated,
via new helper, tsc_check_state(), hich replaces tsc_halts_in_c().
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Frans Pop <elendil@planet.nl>

If the BIOS hands us an invalid throttling state,
write a valid state.

http://bugzilla.kernel.org/show_bug.cgi?id=13259Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Introduce module parameter processor.ignore_tpc.

Some laptops are shipped with buggy _TPC,
this module parameter is used to to disable the buggy support.

http://bugzilla.kernel.org/show_bug.cgi?id=13259Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

drivers/built-in.o: In function `intel_opregion_init':
(.text+0x9d540): undefined reference to `acpi_video_register'

http://bugzilla.kernel.org/show_bug.cgi?id=13165Signed-off-by: Len Brown <len.brown@intel.com>

In 2.6.29,
31878dd8
"ACPI: remove BM_RLD access from idle entry path"
moved BM_RLD initialization to init-time from run time.

But we discovered that some BIOS do not restore BM_RLD
after suspend, causing device errors on C3 and C4
after resume.  So now the kernel restores BM_RLD.

http://bugzilla.kernel.org/show_bug.cgi?id=13032Signed-off-by: Len Brown <len.brown@intel.com>

The BIOS bug workaround mistakenly got disabled
when we followed the ACPI specification more closely
by ignoring OS updates to that bit.

(The BIOS is supposed to update SCI_EN, not the OS)

http://bugzilla.kernel.org/show_bug.cgi?id=13289Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI MSI: Fix MSI-X with NIU cards
  PCI: Fix pci-e port driver slot_reset bad default return value

Check the return value of sysdev_suspend().  I think this was a typo.
Without this change, the following "if" check is always false.
I also changed the error message so it's distinguishable from the
similar message a few lines above.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

* git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6:
  Bluetooth: Don't trigger disconnect timeout for security mode 3 pairing
  Bluetooth: Don't use hci_acl_connect_cancel() for incoming connections
  Bluetooth: Fix wrong module refcount when connection setup fails

Another case of me handling the fallout from Davem's unfortunate
addiction to shuffleboard.

Won't anybody think of the children? Join the anti-shuffleboard league
today!

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.
  drm/i915: Set HDMI hot plug interrupt enable for only the output in question.
  drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS.
  drm/i915: Use the GM45 VGA hotplug workaround on G45 as well.
  drm/i915: ignore LVDS on intel graphics systems that lie about having it
  drm/i915: sanity check IER at wait_request time
  drm/i915: workaround IGD i2c bus issue in kernel side (v2)
  drm/i915: Don't allow binding objects into the last page of the aperture.
  drm/i915: save/restore fence registers across suspend/resume
  drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.

* 'upstream-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: Media rotation rate and form factor heuristics
  libata: Report disk alignment and physical block size
  sata_fsl: Fix the command description of FSL SATA controller
  sata_fsl: Fix compile warnings
  [libata] sata_sx4: fixup interrupt handling
  [libata] sata_sx4: convert to new exception handling methods

* git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6:
  iwlwifi: fix device id registration for 6000 series 2x2 devices
  ath5k: update channel in sw state after stopping RX and TX
  rtl8187: use DMA-aware buffers with usb_control_msg
  mac80211: avoid NULL ptr deref when finding max_rates in PID and minstrel
  airo: airo_get_encode{,ext} potential buffer overflow

Pulled directly by Linus because Davem is off playing shuffle-board at
some Alaskan cruise, and the NULL ptr deref issue hits people and should
get merged sooner rather than later.

David - make us proud on the shuffle-board tournament!

This patch provides new heuristics for parsing both the form factor and
media rotation rate ATA IDENFITY words.

The reported ATA version must be 7 or greater and the device must return
values defined as valid in the standard.  Only then are the
characteristics reported to SCSI via the VPD B1 page.

This seems like a reasonable compromise to me considering that we have
been shipping several kernel releases that key off the rotation rate bit
without any version checking whatsoever.  With no complaints so far.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

For disks with 4KB sectors, report the correct block size and alignment
when filling out the READ CAPACITY(16) response.

This patch is based upon code from Matthew Wilcox' 4KB ATA tree.  I
fixed the bug I reported a while back caused by ATA and SCSI using
different approaches to describing the alignment.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The bit 11 of command description is reserved bit in Freescale
SATA controller and needs to be set to '1'.  This is needed to
make sure the last write from the controller to the buffer
descriptor is seen before an interrupt is raised.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

We we build with dma_addr_t as a 64-bit quantity we get:

drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg':
drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t'
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Issuing ATA_CMD_SET_FEATURES (0xef) times out because
pdc20621_interrupt ignores command completion since
ATA_TFLAG_POLLING flag is set.

This has already been fixed for sata_promise:

commit 51b94d2a
Author: Tejun Heo <htejun@gmail.com>
Date:   Fri Jun 8 13:46:55 2007 -0700

    sata_promise: use TF interface for polling NODATA commands

Also, this patch includes Mikael's original patches:

http://marc.info/?l=linux-ide&m=121135828227724&w=2
http://marc.info/?l=linux-ide&m=121144512109826&w=2Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Fix race in ext4_inode_info.i_cached_extent
  ext4: Clear the unwritten buffer_head flag after the extent is initialized
  ext4: Use a fake block number for delayed new buffer_head
  ext4: Fix sub-block zeroing for writes into preallocated extents

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: DaVinci EVM board support buildfixes
  ASoC: DaVinci I2S updates
  ASoC: davinci-pcm buildfixes
  ALSA: pcsp: fix printk format warning
  ALSA: riptide: postfix increment and off by one
  pxa2xx-ac97: fix reset gpio mode setting
  ASoC: soc-core: fix crash when removing not instantiated card

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: gdb documentation fix
  kgdb,i386: use address that SP register points to in the exception frame
  sysrq, intel_fb: fix sysrq g collision

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "mm: add /proc controls for pdflush threads"
  viocd: needs to depend on BLOCK
  block: fix the bio_vec array index out-of-bounds test

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix PCI ROM access
  powerpc/pseries: Really fix the oprofile CPU type on pseries
  serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.
  powerpc/cell: Make ptcal more reliable
  powerpc: Allow mem=x cmdline to work with 4G+
  powerpc/mpic: Fix incorrect allocation of interrupt rev-map
  powerpc: Fix oprofile sampling of marked events on POWER7
  powerpc/iseries: Fix pci breakage due to bad dma_data initialization
  powerpc: Fix mktree build error on Mac OS X host
  powerpc/virtex: Fix duplicate level irq events.
  powerpc/virtex: Add uImage to the default images list
  powerpc/boot: add simpleImage.* to clean-files list
  powerpc/8xx: Update defconfigs
  powerpc/embedded6xx: Update defconfigs
  powerpc/86xx: Update defconfigs
  powerpc/85xx: Update defconfigs
  powerpc/83xx: Update defconfigs
  powerpc/fsl_soc: Remove mpc83xx_wdt_init, again

devpts_get_sb() calls memset(0) to clear mount options and calls
parse_mount_options() if user specified any mount options.

The memset(0) is bogus since the 'mode' and 'ptmxmode' options are
non-zero by default.  parse_mount_options() restores options to default
anyway and can properly deal with NULL mount options.

So in devpts_get_sb() remove memset(0) and call parse_mount_options() even
for NULL mount options.

Bug reported by Eric Paris: http://lkml.org/lkml/2009/5/7/448.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
Reported-by: Eric Paris <eparis@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Reviewed-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>