The ftrace samples need per-architecture trampoline implementations to
save and restore argument registers around the calls to my_direct_func*
and to restore polluted registers (e.g: ra).
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Select the HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS to provide the
register_ftrace_direct[_multi] interfaces allowing users to register
the customed trampoline (direct_caller) as the mcount for one or more
target functions. And modify_ftrace_direct[_multi] are also provided
for modifying direct_caller.

There are a few cases to distinguish:
- If a direct call ops is the only one tracing a function AND the direct
  called trampoline is within the reach of a 'bl' instruction
  -> the ftrace patchsite jumps to the trampoline
- Else
  -> the ftrace patchsite jumps to the ftrace_regs_caller trampoline points
     to ftrace_list_ops so it iterates over all registered ftrace ops,
     including the direct call ops and calls its call_direct_funcs handler
     which stores the direct called trampoline's address in the ftrace_regs
     and the ftrace_regs_caller trampoline will return to that address
     instead of returning to the traced function
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

In the module processing functions, the same logic can be reused by
implementing ftrace_find_callable_addr().
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

We can see the following build error if CONFIG_DYNAMIC_FTRACE_WITH_REGS
is not set on LoongArch:

arch/loongarch/kernel/ftrace_dyn.c: In function ‘ftrace_make_call’:
arch/loongarch/kernel/ftrace_dyn.c:167:23: error: implicit declaration of function ‘__get_mod’
  167 |                 ret = __get_mod(&mod, pc);
      |                       ^~~~~~~~~
arch/loongarch/kernel/ftrace_dyn.c:171:24: error: implicit declaration of function ‘get_plt_addr’
  171 |                 addr = get_plt_addr(mod, addr);
      |                        ^~~~~~~~~~~~

The reason is that the __get_mod() and get_plt_addr() may be called in
ftrace_make_{call,nop}.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add new ftrace_regs_{get,set}_*() helpers which can be used to manipulate
ftrace_regs. When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y, these can always
be used on any ftrace_regs, and when CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
=n these can be used when regs are available.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Inspired by the commit 42d038c4 ("arm64: Add support for function
error injection") and the commit ee55ff80 ("riscv: Add support for
function error injection"), this patch supports function error injection
for LoongArch.

Mainly implement two functions:
(1) regs_set_return_value() which is used to overwrite the return value,
(2) override_function_with_return() which is used to override the probed
function returning and jump to its caller.

Here is a simple test under CONFIG_FUNCTION_ERROR_INJECTION and
CONFIG_FAIL_FUNCTION:

  # echo sys_clone > /sys/kernel/debug/fail_function/inject
  # echo 100 > /sys/kernel/debug/fail_function/probability
  # dmesg
  bash: fork: Invalid argument
  # dmesg
  ...
  FAULT_INJECTION: forcing a failure.
  name fail_function, interval 1, probability 100, space 0, times 1
  ...
  Call Trace:
  [<90000000002238f4>] show_stack+0x5c/0x180
  [<90000000012e384c>] dump_stack_lvl+0x60/0x88
  [<9000000000b1879c>] should_fail_ex+0x1b0/0x1f4
  [<900000000032ead4>] fei_kprobe_handler+0x28/0x6c
  [<9000000000230970>] kprobe_breakpoint_handler+0xf0/0x118
  [<90000000012e3e60>] do_bp+0x2c4/0x358
  [<9000000002241924>] exception_handlers+0x1924/0x10000
  [<900000000023b7d0>] sys_clone+0x0/0x4
  [<90000000012e4744>] do_syscall+0x7c/0x94
  [<9000000000221e44>] handle_syscall+0xc4/0x160
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

FORTIFY_SOURCE could detect various overflows at compile and run time.
ARCH_HAS_FORTIFY_SOURCE means that the architecture can be built and run
with CONFIG_FORTIFY_SOURCE. So select it in LoongArch.

See more about this feature from commit 6974f0c4 ("include/linux/
string.h: add the option of fortified string.h functions").
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

With a blatant copy of some MIPS bits we introduce the crc32 and crc32c
hw accelerated module to LoongArch.

LoongArch has provided these instructions to calculate crc32 and crc32c:
        * crc.w.b.w    crcc.w.b.w
        * crc.w.h.w    crcc.w.h.w
        * crc.w.w.w    crcc.w.w.w
        * crc.w.d.w    crcc.w.d.w

So we can make use of these instructions to improve the performance of
calculation for crc32(c) checksums.

As can be seen from the following test results, crc32(c) instructions
can improve the performance by 58%.

                  Software implemention    Hardware acceleration
  Buffer size     time cost (seconds)      time cost (seconds)    Accel.
   100 KB                0.000845                 0.000534        59.1%
     1 MB                0.007758                 0.004836        59.4%
    10 MB                0.076593                 0.047682        59.4%
   100 MB                0.756734                 0.479126        58.5%
  1000 MB                7.563841                 4.778266        58.5%
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch platform is 64-bit system, which supports 8-bytes memory
accessing, but generic checksum functions use 4-byte memory access.
So add 8-bytes memory access optimization for checksum functions on
LoongArch. And the code comes from arm64 system.

When network hw checksum is disabled, iperf performance improves about
10% with this patch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

To optimize memset()/memcpy()/memmove() and so on, we use a jump table
to dispatch cases for short data lengths; and for long data lengths, we
split the destination into head part (first 8 bytes), tail part (last 8
bytes) and middle part. The head part and tail part may be at unaligned
addresses, while the middle part is always aligned (the middle part is
allowed to overlap the head/tail part). In this way, the first and last
8 bytes may be unaligned accesses, but we can make sure the data in the
middle is processed at an aligned destination address.

We have tested micro-bench[1] on a Loongson-3C5000 16-core machine (2.2GHz):

1. memset

| length | src offset | dst offset | speed before | speed after | %       |
|--------|------------|------------|--------------|-------------|---------|
| 8      | 0          | 0          | 696.191      | 1518.785    | 118.16% |
| 8      | 0          | 1          | 696.325      | 1518.937    | 118.14% |
| 50     | 0          | 0          | 969.976      | 8053.902    | 730.32% |
| 50     | 0          | 1          | 970.034      | 8058.475    | 730.74% |
| 300    | 0          | 0          | 5876.612     | 16544.703   | 181.53% |
| 300    | 0          | 1          | 5030.849     | 16549.011   | 228.95% |
| 1200   | 0          | 0          | 11797.077    | 16752.137   | 42.00%  |
| 1200   | 0          | 1          | 5687.141     | 16645.233   | 192.68% |
| 4000   | 0          | 0          | 15723.27     | 16761.557   | 6.60%   |
| 4000   | 0          | 1          | 5906.114     | 16732.316   | 183.30% |
| 8000   | 0          | 0          | 16751.403    | 16770.002   | 0.11%   |
| 8000   | 0          | 1          | 5995.449     | 16754.07    | 179.45% |

2. memcpy

| length | src offset | dst offset | speed before | speed after | %       |
|--------|------------|------------|--------------|-------------|---------|
| 8      | 0          | 0          | 696.2        | 1670.605    | 139.96% |
| 8      | 0          | 1          | 696.325      | 1671.138    | 139.99% |
| 50     | 0          | 0          | 969.974      | 8724.999    | 799.51% |
| 50     | 0          | 1          | 970.032      | 8730.138    | 799.98% |
| 300    | 0          | 0          | 5564.662     | 16272.652   | 192.43% |
| 300    | 0          | 1          | 4670.436     | 14972.842   | 220.59% |
| 1200   | 0          | 0          | 10740.23     | 16751.728   | 55.97%  |
| 1200   | 0          | 1          | 5027.741     | 14874.564   | 195.85% |
| 4000   | 0          | 0          | 15122.367    | 16737.642   | 10.68%  |
| 4000   | 0          | 1          | 5536.918     | 14890.397   | 168.93% |
| 8000   | 0          | 0          | 16505.453    | 16553.543   | 0.29%   |
| 8000   | 0          | 1          | 5821.619     | 14841.804   | 154.94% |

3. memmove

| length | src offset | dst offset | speed before | speed after | %       |
|--------|------------|------------|--------------|-------------|---------|
| 8      | 0          | 0          | 982.693      | 1670.568    | 70.00%  |
| 8      | 0          | 1          | 983.023      | 1671.174    | 70.00%  |
| 50     | 0          | 0          | 1230.87      | 8727.625    | 609.06% |
| 50     | 0          | 1          | 1232.515     | 8730.138    | 608.32% |
| 300    | 0          | 0          | 6490.375     | 16296.993   | 151.09% |
| 300    | 0          | 1          | 4282.687     | 14972.842   | 249.61% |
| 1200   | 0          | 0          | 11742.755    | 16752.546   | 42.66%  |
| 1200   | 0          | 1          | 5039.338     | 14872.951   | 195.14% |
| 4000   | 0          | 0          | 15467.786    | 16737.09    | 8.21%   |
| 4000   | 0          | 1          | 5009.905     | 14890.542   | 197.22% |
| 8000   | 0          | 0          | 16489.664    | 16553.273   | 0.39%   |
| 8000   | 0          | 1          | 5823.786     | 14858.646   | 155.14% |

* speed: MB/s
* length: byte

[1] https://github.com/heiher/mem-benchSigned-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Provide kernel_fpu_begin()/kernel_fpu_end() to allow the kernel itself
to use fpu. They can be used by some other kernel components, e.g., the
AMDGPU graphic driver for DCN.
Reported-by: WANG Xuerui <kernel@xen0n.name>
Tested-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

SEGV_BNDERR was introduced initially for supporting the Intel MPX, but
fell into disuse after the MPX support was removed. The LoongArch
bounds-checking instructions behave very differently than MPX, but
overall the interface is still kind of suitable for conveying the
information to userland when bounds-checking assertions trigger, so we
wouldn't have to invent more UAPI. Specifically, when the BCE triggers,
a SEGV_BNDERR is sent to userland, with si_addr set to the out-of-bounds
address or value (in asrt{gt,le}'s case), and one of si_lower or
si_upper set to the configured bound depending on the faulting
instruction. The other bound is set to either 0 or ULONG_MAX to resemble
a range with both lower and upper bounds.

Note that it is possible to have si_addr == si_lower in case of a
failing asrtgt or {ld,st}gt, because those instructions test for strict
greater-than relationship. This should not pose a problem for userland,
though, because the faulting PC is available for the application to
associate back to the exact instruction for figuring out the
expectation.

Example exception context generated by a faulting `asrtgt.d t0, t1`
(assert t0 > t1 or BCE) with t0=100 and t1=200:

> pc 00005555558206a4 ra 00007ffff2d854fc tp 00007ffff2f2f180 sp 00007ffffbf9fb80
> a0 0000000000000002 a1 00007ffffbf9fce8 a2 00007ffffbf9fd00 a3 00007ffff2ed4558
> a4 0000000000000000 a5 00007ffff2f044c8 a6 00007ffffbf9fce0 a7 fffffffffffff000
> t0 0000000000000064 t1 00000000000000c8 t2 00007ffffbfa2d5e t3 00007ffff2f12aa0
> t4 00007ffff2ed6158 t5 00007ffff2ed6158 t6 000000000000002e t7 0000000003d8f538
> t8 0000000000000005 u0 0000000000000000 s9 0000000000000000 s0 00007ffffbf9fce8
> s1 0000000000000002 s2 0000000000000000 s3 00007ffff2f2c038 s4 0000555555820610
> s5 00007ffff2ed5000 s6 0000555555827e38 s7 00007ffffbf9fd00 s8 0000555555827e38
>    ra: 00007ffff2d854fc
>   ERA: 00005555558206a4
>  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
>  PRMD: 00000007 (PPLV3 +PIE -PWE)
>  EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
>  ECFG: 0007181c (LIE=2-4,11-12 VS=7)
> ESTAT: 000a0000 [BCE] (IS= ECode=10 EsubCode=0)
>  PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Use ISA manual names for BADV and CPUCFG.PRID lines in show_regs(), for
stylistic consistency with the other lines already touched.

While at it, also include current CPU's full name in show_regs() output.
It may be more helpful for developers looking at the resulting dumps,
because multiple distinct CPU models may share the same PRID. Not having
this info available may hide problems only found on some but not all of
the models sharing one specific PRID.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Example output looks like:

[   xx.xxxxxx] ESTAT: 00001000 [INT] (IS=12 ECode=0 EsubCode=0)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Example output looks like:

[   xx.xxxxxx]  ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Example output looks like:

[   xx.xxxxxx]  EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Example output looks like:

[   xx.xxxxxx]  PRMD: 00000004 (PPLV0 +PIE -PWE)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Example output looks like:

[   xx.xxxxxx]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)

Some initial machinery for this pretty-printing format has been included
in this patch as well.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Use uppercase CSR names throughout for consistency with the manual
wording, and right-align the keys. The "CSR" part is inferrable from
context, hence dropped for more horizontal space.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Otherwise the addresses wouldn't make sense at all.

While at it, align the "map keys" to maintain right-alignment with the
"estat:" line too; also swap the ERA and ra lines so all CSRs are shown
together.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Show PC (CSR.ERA) in place of $zero, and also show the syscall restart
flag (conveniently stuffed in regs[0]) if non-zero.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Define them according to the ISA manual, in order to enable matching the
sub-exceptions for humanization purposes later.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

While interrupts are assigned ECodes `64 + interrupt number`, all
existing use sites of interrupt numbers want the 64 subtracted.
Re-arrange the definitions so that the actual interrupt number is used
everywhere, and make EXCCODE_INT_END inclusive as it is more intuitive
that way.

While at it, according to the asm/loongarch.h definitions, the total
number of architectural interrupts should be 14, but various other
places indicate otherwise (13 or 15). Those places have been adjusted
to 14 as well for consistency.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch architecture changes for 6.4 depend on the irq changes
to work on "dual-bridge" systems, so merge them to create a base.

We started disabling '-Warray-bounds' for gcc-12 originally on s390,
because it resulted in some warnings that weren't realistically fixable
(commit 8b202ee2: "s390: disable -Warray-bounds").

That s390-specific issue was then found to be less common elsewhere, but
generic (see f0be87c4: "gcc-12: disable '-Warray-bounds' universally
for now"), and then later expanded the version check was expanded to
gcc-11 (5a41237a: "gcc: disable -Warray-bounds for gcc-11 too").

And it turns out that I was much too optimistic in thinking that it's
all going to go away, and here we are with gcc-13 showing all the same
issues.  So instead of expanding this one version at a time, let's just
disable it for gcc-11+, and put an end limit to it only when we actually
find a solution.

Yes, I'm sure some of this is because the kernel just does odd things
(like our "container_of()" use, but also knowingly playing games with
things like linker tables and array layouts).

And yes, some of the warnings are likely signs of real bugs, but when
there are hundreds of false positives, that doesn't really help.

Oh well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the prefix in the kernel source tarball

 - Fix a typo in the copyright file in Debian package

* tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: use proper prefix for tarballs to fix rpm-pkg build error
  kbuild: deb-pkg: Fix a spell typo in mkdebian script

Pull irq fix from Borislav Petkov:

 - Remove an over-zealous sanity check of the array of MSI-X vectors to
   be allocated for a device

* tag 'irq_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI/MSI: Remove over-zealous hardware size check in pci_msix_validate_entries()

Pull x86 fix from Borislav Petkov

 - Fix for older binutils which do not support C-syntax constant
   suffixes

* tag 'x86_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Do not use integer constant suffixes in inline asm

Pull input fixes from Dmitry Torokhov:

 - a check in pegasus-notetaker driver to validate the type of pipe when
   probing a new device

 - a fix for Cypress touch controller to correctly parse maximum number
   of touches.

* tag 'input-for-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cyttsp5 - fix sensing configuration data structure
  Input: pegasus-notetaker - check pipe type when probing

Since commit f8d94c4e ("kbuild: do not create intermediate *.tar
for source tarballs"), 'make rpm-pkg' fails because the prefix of the
source tarball is 'linux.tar/' instead of 'linux/'. $(basename $@)
strips only '.gz' from the filename linux.tar.gz.

You need to strip two suffixes from compressed tarballs and one suffix
from uncompressed tarballs (for example 'perf-6.3.0.tar' generated by
'make perf-tar-src-pkg').

One tricky fix might be --prefix=$(firstword $(subst .tar, ,$@))/
but I think it is better to hard-code the prefix.

Fixes: f8d94c4e ("kbuild: do not create intermediate *.tar for source tarballs")
Reported-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

Signed-off-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull MIPS fix from Thomas Bogendoerfer:
 "Fix for link errors"

* tag 'mips-fixes_6.3_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Define RUNTIME_DISCARD_EXIT in LD script

Pull kvm fixes from Paolo Bonzini:
 "Two serious ARM fixes:

   - Plug a buffer overflow due to the use of the user-provided register
     width for firmware regs. Outright reject accesses where the user
     register width does not match the kernel representation.

   - Protect non-atomic RMW operations on vCPU flags against preemption,
     as an update to the flags by an intervening preemption could be
     lost"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()
  KVM: arm64: Make vcpu flag updates non-preemptible

Pull cifs fixes from Steve French:
 "Three small smb3 client fixes:

   - two important fixes for unbuffered read regression with the
     iov_iter changes (e.g. read soon after mount in some multichannel
     scenarios)

   - DFS prefix path fix (also for stable)"

* tag '6.3-rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Reapply lost fix from commit 30b2b219
  cifs: Fix unbuffered read
  cifs: avoid dup prefix path in dfs_get_automount_devname()

Merge tag 'kvmarm-fixes-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.3, part #4

 - Plug a buffer overflow due to the use of the user-provided register
   width for firmware regs. Outright reject accesses where the
   user register width does not match the kernel representation.

 - Protect non-atomic RMW operations on vCPU flags against preemption,
   as an update to the flags by an intervening preemption could be lost.

MIPS's exit sections are discarded at runtime as well.

Fixes link error:
`.exit.text' referenced in section `__jump_table' of fs/fuse/inode.o:
defined in discarded section `.exit.text' of fs/fuse/inode.o

Fixes: 99cb0d91 ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This reverts commit 5c62d5aa.

This broke wake-on-lan for multiple people, and for much too long.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217069
Link: https://lore.kernel.org/all/754225a2-95a9-2c36-1886-7da1a78308c2@loongson.cn/
Link: https://github.com/acpica/acpica/pull/866
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jianmin Lv <lvjianmin@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Bob Moore <robert.moore@intel.com>
Cc: stable@kernel.org # 6.2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull btrfs fixes from David Sterba:
 "Two patches fixing the problem with aync discard.

  The default settings had a low IOPS limit and processing a large batch
  to discard would take a long time. On laptops this can cause increased
  power consumption due to disk activity.

  As async discard has been on by default since 6.2 this likely affects
  a lot of users.

  Summary:

   - increase the default IOPS limit 10x which reportedly helped

   - setting the sysfs IOPS value to 0 now does not throttle anymore
     allowing the discards to be processed at full speed. Previously
     there was an arbitrary 6 hour target for processing the pending
     batch"

* tag 'for-6.3-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: reinterpret async discard iops_limit=0 as no delay
  btrfs: set default discard iops_limit to 1000

Pull block fix from Jens Axboe:
 "Just a single revert of a patch from the 6.3 series"

* tag 'block-6.3-2023-04-21' of git://git.kernel.dk/linux:
  Revert "block: Merge bio before checking ->cached_rq"