This clarifies the rules for min()/max()/clamp() type checking and makes
them a much more efficient macro expansion.

In particular, we now look at the type and range of the inputs to see
whether they work together, generating a mask of acceptable comparisons,
and then just verifying that the inputs have a shared case:

 - an expression with a signed type can be used for
    (1) signed comparisons
    (2) unsigned comparisons if it is statically known to have a
        non-negative value

 - an expression with an unsigned type can be used for
    (3) unsigned comparison
    (4) signed comparisons if the type is smaller than 'int' and thus
        the C integer promotion rules will make it signed anyway

Here rule (1) and (3) are obvious, and rule (2) is important in order to
allow obvious trivial constants to be used together with unsigned
values.

Rule (4) is not necessarily a good idea, but matches what we used to do,
and we have extant cases of this situation in the kernel.  Notably with
bcachefs having an expression like

	min(bch2_bucket_sectors_dirty(a), ca->mi.bucket_size)

where bch2_bucket_sectors_dirty() returns an 's64', and
'ca->mi.bucket_size' is of type 'u16'.

Technically that bcachefs comparison is clearly sensible on a C type
level, because the 'u16' will go through the normal C integer promotion,
and become 'int', and then we're comparing two signed values and
everything looks sane.

However, it's not entirely clear that a 'min(s64,u16)' operation makes a
lot of conceptual sense, and it's possible that we will remove rule (4).
After all, the _reason_ we have these complicated type checks is exactly
that the C type promotion rules are not very intuitive.

But at least for now the rule is in place for backwards compatibility.

Also note that rule (2) existed before, but is hugely relaxed by this
commit.  It used to be true only for the simplest compile-time
non-negative integer constants.  The new macro model will allow cases
where the compiler can trivially see that an expression is non-negative
even if it isn't necessarily a constant.

For example, the amdgpu driver does

	min_t(size_t, sizeof(fru_info->serial), pia[addr] & 0x3F));

because our old 'min()' macro would see that 'pia[addr] & 0x3F' is of
type 'int' and clearly not a C constant expression, so doing a 'min()'
with a 'size_t' is a signedness violation.

Our new 'min()' macro still sees that 'pia[addr] & 0x3F' is of type
'int', but is smart enough to also see that it is clearly non-negative,
and thus would allow that case without any complaints.

Cc: Arnd Bergmann <arnd@kernel.org>
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For some reason I didn't see this issue on my arm64 or x86-64 builds,
but Stephen Rothwell reports that commit 2accfdb7 ("profiling:
attempt to remove per-cpu profile flip buffer") left these static
variables around, and the powerpc build is unhappy about them:

  kernel/profile.c:52:28: warning: 'cpu_profile_flip' defined but not used [-Wunused-variable]
     52 | static DEFINE_PER_CPU(int, cpu_profile_flip);
        |                            ^~~~~~~~~~~~~~~~
  ..

So remove these stale left-over remnants too.

Fixes: 2accfdb7 ("profiling: attempt to remove per-cpu profile flip buffer")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull HID fixes from Benjamin Tissoires:

 - fixes for HID-BPF after the merge with the bpf tree (Arnd Bergmann
   and Benjamin Tissoires)

 - some tool type fix for the Wacom driver (Tatsunosuke Tobita)

 - a reorder of the sensor discovery to ensure the HID AMD SFH is
   removed when no sensors are available (Basavaraj Natikar)

* tag 'for-linus-2024072901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  selftests/hid: add test for attaching multiple time the same struct_ops
  HID: bpf: prevent the same struct_ops to be attached more than once
  selftests/hid: disable struct_ops auto-attach
  selftests/hid: fix bpf_wq new API
  HID: amd_sfh: Move sensor discovery before HID device initialization
  hid: bpf: add BPF_JIT dependency
  HID: wacom: more appropriate tool type categorization
  HID: wacom: Modify pen IDs

Pull virtio fixes from Michael Tsirkin:
 "The biggest thing here is the adminq change - but it looks like the
  only way to avoid headq blocking causing indefinite stalls.

  This fixes three issues:

   - Prevent admin commands on one VF blocking another.

     This prevents a bad VF from blocking a good one, as well as fixing
     a scalability issue with large # of VFs

   - Correctly return error on command failure on octeon. We used to
     treat failed commands as a success.

   - Fix modpost warning when building virtio_dma_buf. Harmless, but the
     fix is trivial"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_pci_modern: remove admin queue serialization lock
  virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result
  virtio_pci_modern: pass cmd as an identification token
  virtio_pci_modern: create admin queue of queried size
  virtio: create admin queues alongside other virtqueues
  virtio_pci: pass vq info as an argument to vp_setup_vq()
  virtio: push out code to vp_avq_index()
  virtio_pci_modern: treat vp_dev->admin_vq.info.vq pointer as static
  virtio_pci: introduce vector allocation fallback for slow path virtqueues
  virtio_pci: pass vector policy enum to vp_find_one_vq_msix()
  virtio_pci: pass vector policy enum to vp_find_vqs_msix()
  virtio_pci: simplify vp_request_msix_vectors() call a bit
  virtio_pci: push out single vq find code to vp_find_one_vq_msix()
  vdpa/octeon_ep: Fix error code in octep_process_mbox()
  virtio: add missing MODULE_DESCRIPTION() macro

The TWA_NMI_CURRENT handling very much depends on IRQ_WORK, but that
isn't universally enabled everywhere.

Maybe the IRQ_WORK infrastructure should just be unconditional - x86
ends up indirectly enabling it through unconditionally enabling
PERF_EVENTS, for example.  But it also gets enabled by having SMP
support, or even if you just have PRINTK enabled.

But in the meantime TWA_NMI_CURRENT causes tons of build failures on
various odd minimal configs.  Which did show up in linux-next, but
despite that nobody bothered to fix it or even inform me until -rc1 was
out.

Fixes: 466e4d80 ("task_work: Add TWA_NMI_CURRENT as an additional notify mode")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the really old legacy kernel profiling code, which has long
since been obviated by "real profiling" (ie 'prof' and company), and
mainly remains as a source of syzbot reports.

There are anecdotal reports that people still use it for boot-time
profiling, but it's unlikely that such use would care about the old NUMA
optimizations in this code from 2004 (commit ad02973d: "profile: 512x
Altix timer interrupt livelock fix" in the BK import archive at [1])

So in order to head off future syzbot reports, let's try to simplify
this code and get rid of the per-cpu profile buffers that are quite a
large portion of the complexity footprint of this thing (including CPU
hotplug callbacks etc).

It's unlikely anybody will actually notice, or possibly, as Thomas put
it: "Only people who indulge in nostalgia will notice :)".

That said, if it turns out that this code is actually actively used by
somebody, we can always revert this removal.  Thus the "attempt" in the
summary line.

[ Note: in a small nod to "the profiling code can cause NUMA problems",
  this also removes the "increment the last entry in the profiling array
  on any unknown hits" logic. That would account any program counter in
  a module to that single counter location, and might exacerbate any
  NUMA cacheline bouncing issues ]

Link: https://lore.kernel.org/all/CAHk-=wgs52BxT4Zjmjz8aNvHWKxf5_ThBY4bYL1Y6CTaNL2dTw@mail.gmail.com/
Link:  https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1]
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

syzbot is reporting uninit-value at profile_hits(), for there is a race
window between

  if (!alloc_cpumask_var(&prof_cpu_mask, GFP_KERNEL))
    return -ENOMEM;
  cpumask_copy(prof_cpu_mask, cpu_possible_mask);

in profile_init() and

  cpumask_available(prof_cpu_mask) &&
  cpumask_test_cpu(smp_processor_id(), prof_cpu_mask))

in profile_tick(); prof_cpu_mask remains uninitialzed until cpumask_copy()
completes while cpumask_available(prof_cpu_mask) returns true as soon as
alloc_cpumask_var(&prof_cpu_mask) completes.

We could replace alloc_cpumask_var() with zalloc_cpumask_var() and
call cpumask_copy() from create_proc_profile() on only UP kernels, for
profile_online_cpu() calls cpumask_set_cpu() as needed via
cpuhp_setup_state(CPUHP_AP_ONLINE_DYN) on SMP kernels. But this patch
removes prof_cpu_mask because it seems unnecessary.

The cpumask_test_cpu(smp_processor_id(), prof_cpu_mask) test
in profile_tick() is likely always true due to

  a CPU cannot call profile_tick() if that CPU is offline

and

  cpumask_set_cpu(cpu, prof_cpu_mask) is called when that CPU becomes
  online and cpumask_clear_cpu(cpu, prof_cpu_mask) is called when that
  CPU becomes offline

. This test could be false during transition between online and offline.

But according to include/linux/cpuhotplug.h , CPUHP_PROFILE_PREPARE
belongs to PREPARE section, which means that the CPU subjected to
profile_dead_cpu() cannot be inside profile_tick() (i.e. no risk of
use-after-free bug) because interrupt for that CPU is disabled during
PREPARE section. Therefore, this test is guaranteed to be true, and
can be removed. (Since profile_hits() checks prof_buffer != NULL, we
don't need to check prof_buffer != NULL here unless get_irq_regs() or
user_mode() is such slow that we want to avoid when prof_buffer == NULL).

do_profile_hits() is called from profile_tick() from timer interrupt
only if cpumask_test_cpu(smp_processor_id(), prof_cpu_mask) is true and
prof_buffer is not NULL. But syzbot is also reporting that sometimes
do_profile_hits() is called while current thread is still doing vzalloc(),
where prof_buffer must be NULL at this moment. This indicates that multiple
threads concurrently tried to write to /sys/kernel/profiling interface,
which caused that somebody else try to re-allocate prof_buffer despite
somebody has already allocated prof_buffer. Fix this by using
serialization.
Reported-by: syzbot <syzbot+b1a83ab2a9eb9321fbdd@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=b1a83ab2a9eb9321fbddSigned-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+b1a83ab2a9eb9321fbdd@syzkaller.appspotmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

syzbot is reporting too large allocation at input_mt_init_slots(), for
num_slots is supplied from userspace using ioctl(UI_DEV_CREATE).

Since nobody knows possible max slots, this patch chose 1024.
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM updates from Russell King:

 - ftrace: don't assume stack frames are contiguous in memory

 - remove unused mod_inwind_map structure

 - spelling fixes

 - allow use of LD dead code/data elimination

 - fix callchain_trace() return value

 - add support for stackleak gcc plugin

 - correct some reset asm function prototypes for CFI

[ Missed the merge window because Russell forgot to push out ]

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
  ARM: 9408/1: mm: CFI: Fix some erroneous reset prototypes
  ARM: 9407/1: Add support for STACKLEAK gcc plugin
  ARM: 9406/1: Fix callchain_trace() return value
  ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
  ARM: 9403/1: Alpine: Spelling s/initialiing/initializing/
  ARM: 9402/1: Kconfig: Spelling s/Cortex A-/Cortex-A/
  ARM: 9400/1: Remove unused struct 'mod_unwind_map'

Now that we no longer have any C constant expression contexts (ie array
size declarations or static initializers) that use min() or max(), we
can simpify the implementation by not having to worry about the result
staying as a C constant expression.

So now we can unconditionally just use temporary variables of the right
type, and get rid of the excessive expansion that used to come from the
use of

   __builtin_choose_expr(__is_constexpr(...), ..

to pick the specialized code for constant expressions.

Another expansion simplification is to pass the temporary variables (in
addition to the original expression) to our __types_ok() macro.  That
may superficially look like it complicates the macro, but when we only
want the type of the expression, expanding the temporary variable names
is much simpler and smaller than expanding the potentially complicated
original expression.

As a result, on my machine, doing a

  $ time make drivers/staging/media/atomisp/pci/isp/kernels/ynr/ynr_1.0/ia_css_ynr.host.i

goes from

	real	0m16.621s
	user	0m15.360s
	sys	0m1.221s

to

	real	0m2.532s
	user	0m2.091s
	sys	0m0.452s

because the token expansion goes down dramatically.

In particular, the longest line expansion (which was line 71 of that
'ia_css_ynr.host.c' file) shrinks from 23,338kB (yes, 23MB for one
single line) to "just" 1,444kB (now "only" 1.4MB).

And yes, that line is still the line from hell, because it's doing
multiple levels of "min()/max()" expansion thanks to some of them being
hidden inside the uDIGIT_FITTING() macro.

Lorenzo has a nice cleanup patch that makes that driver use inline
functions instead of macros for sDIGIT_FITTING() and uDIGIT_FITTING(),
which will fix that line once and for all, but the 16-fold reduction in
this case does show why we need to simplify these helpers.

Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We only had a couple of array[] declarations, and changing them to just
use 'MAX()' instead of 'max()' fixes the issue.

This will allow us to simplify our min/max macros enormously, since they
can now unconditionally use temporary variables to avoid using the
argument values multiple times.

Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While working on simplifying the minmax functions, and avoiding
excessive macro expansion, it turns out that the sr.c use of the
'clamp()' macro has the arguments the wrong way around.

The clamp logic is

	val = clamp(in, low, high);

and it returns the input clamped to the low/high limits. But sr.c ddid

	speed = clamp(0, speed, 0xffff / 177);

which clamps the value '0' to the range '[speed, 0xffff / 177]' and ends
up being nonsensical.

Happily, I don't think anybody ever cared.

Fixes: 9fad9d56 ("scsi: sr: Fix unintentional arithmetic wraparound")
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics.  The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.

These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:

 - trivial duplicated macro definitions have been removed

   Note that 'trivial' here means that it's obviously kernel code that
   already included all the major kernel headers, and thus gets the new
   generic MIN/MAX macros automatically.

 - non-trivial duplicated macro definitions are guarded with #ifndef

   This is the "yes, they define their own versions, but no, the include
   situation is not entirely obvious, and maybe they don't get the
   generic version automatically" case.

 - strange use case #1

   A couple of drivers decided that the way they want to describe their
   versioning is with

	#define MAJ 1
	#define MIN 2
	#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)

   which adds zero value and I just did my Alexander the Great
   impersonation, and rewrote that pointless Gordian knot as

	#define DRV_VERSION "1.2"

   instead.

 - strange use case #2

   A couple of drivers thought that it's a good idea to have a random
   'MIN' or 'MAX' define for a value or index into a table, rather than
   the traditional macro that takes arguments.

   These values were re-written as C enum's instead. The new
   function-line macros only expand when followed by an open
   parenthesis, and thus don't clash with enum use.

Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.

Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix RPM package build error caused by an incorrect locale setup

 - Mark modules.weakdep as ghost in RPM package

 - Fix the odd combination of -S and -c in stack protector scripts,
   which is an error with the latest Clang

* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Fix '-S -c' in x86 stack protector scripts
  kbuild: rpm-pkg: ghost modules.weakdep file
  kbuild: rpm-pkg: Fix C locale setup

This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.

That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.

Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3a7e02c0 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.

The complexity of those macros stems from two issues:

 (a) trying to use them in situations that require a C constant
     expression (in static initializers and for array sizes)

 (b) the type sanity checking

and MIN_T/MAX_T avoids both of these issues.

Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.

But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.

However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.

This does exactly that.

Which in turn will then allow for much simpler implementations of
min_t()/max_t().  All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.

We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.

Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs

Pull UBI and UBIFS updates from Richard Weinberger:

 - Many fixes for power-cut issues by Zhihao Cheng

 - Another ubiblock error path fix

 - ubiblock section mismatch fix

 - Misc fixes all over the place

* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: Fix ubi_init() ubiblock_exit() section mismatch
  ubifs: add check for crypto_shash_tfm_digest
  ubifs: Fix inconsistent inode size when powercut happens during appendant writing
  ubi: block: fix null-pointer-dereference in ubiblock_create()
  ubifs: fix kernel-doc warnings
  ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
  mtd: ubi: Restore missing cleanup on ubi_init() failure path
  ubifs: dbg_orphan_check: Fix missed key type checking
  ubifs: Fix unattached inode when powercut happens in creating
  ubifs: Fix space leak when powercut happens in linking tmpfile
  ubifs: Move ui->data initialization after initializing security
  ubifs: Fix adding orphan entry twice for the same inode
  ubifs: Remove insert_dead_orphan from replaying orphan process
  Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
  ubifs: Don't add xattr inode into orphan area
  ubifs: Fix unattached xattr inode if powercut happens after deleting
  mtd: ubi: avoid expensive do_div() on 32-bit machines
  mtd: ubi: make ubi_class constant
  ubi: eba: properly rollback inside self_check_eba

After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:

  $ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
  clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]

This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.

'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.

All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.

Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317f ("x86: implement x86_32 stack protector")
Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Since ubiblock_exit() is now called from an init function,
the __exit section no longer makes sense.

Cc: Ben Hutchings <bwh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407131403.wZJpd8n2-lkp@intel.com/Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>

Pull turbostat updates from Len Brown:

 - Enable turbostat extensions to add both perf and PMT (Intel
   Platform Monitoring Technology) counters via the cmdline

 - Demonstrate PMT access with built-in support for Meteor Lake's
   Die C6 counter

* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: version 2024.07.26
  tools/power turbostat: Include umask=%x in perf counter's config
  tools/power turbostat: Document PMT in turbostat.8
  tools/power turbostat: Add MTL's PMT DC6 builtin counter
  tools/power turbostat: Add early support for PMT counters
  tools/power turbostat: Add selftests for added perf counters
  tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
  tools/power turbostat: Move verbose counter messages to level 2
  tools/power turbostat: Move debug prints from stdout to stderr
  tools/power turbostat: Fix typo in turbostat.8
  tools/power turbostat: Add perf added counter example to turbostat.8
  tools/power turbostat: Fix formatting in turbostat.8
  tools/power turbostat: Extend --add option with perf counters
  tools/power turbostat: Group SMI counter with APERF and MPERF
  tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
  tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
  tools/power turbostat: Remove anonymous union from rapl_counter_info_t
  tools/power/turbostat: Switch to new Intel CPU model defines

Pull CXL updates from Dave Jiang:
 "Core:

   - A CXL maturity map has been added to the documentation to detail
     the current state of CXL enabling.

     It provides the status of the current state of various CXL features
     to inform current and future contributors of where things are and
     which areas need contribution.

   - A notifier handler has been added in order for a newly created CXL
     memory region to trigger the abstract distance metrics calculation.

     This should bring parity for CXL memory to the same level vs
     hotplugged DRAM for NUMA abstract distance calculation. The
     abstract distance reflects relative performance used for memory
     tiering handling.

   - An addition for XOR math has been added to address the CXL DPA to
     SPA translation.

     CXL address translation did not support address interleave math
     with XOR prior to this change.

  Fixes:

   - Fix to address race condition in the CXL memory hotplug notifier

   - Add missing MODULE_DESCRIPTION() for CXL modules

   - Fix incorrect vendor debug UUID define

  Misc:

   - A warning has been added to inform users of an unsupported
     configuration when mixing CXL VH and RCH/RCD hierarchies

   - The ENXIO error code has been replaced with EBUSY for inject poison
     limit reached via debugfs and cxl-test support

   - Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
     unnecessary PCI config reads

   - A refactor to a common struct for DRAM and general media CXL
     events"

* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/core/pci: Move reading of control register to immediately before usage
  cxl: Remove defunct code calculating host bridge target positions
  cxl/region: Verify target positions using the ordered target list
  cxl: Restore XOR'd position bits during address translation
  cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
  cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
  cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
  cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
  cxl/core: Fix incorrect vendor debug UUID define
  Documentation: CXL Maturity Map
  cxl/region: Simplify cxl_region_nid()
  cxl/region: Support to calculate memory tier abstract distance
  cxl/region: Fix a race condition in memory hotplug notifier
  cxl: add missing MODULE_DESCRIPTION() macros
  cxl/events: Use a common struct for DRAM and General Media events

Pull unicode update from Gabriel Krisman Bertazi:
 "Two small fixes to silence the compiler and static analyzers tools
  from Ben Dooks and Jeff Johnson"

* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
  unicode: add MODULE_DESCRIPTION() macros
  unicode: make utf8 test count static

In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull more smb client updates from Steve French:

 - fix for potential null pointer use in init cifs

 - additional dynamic trace points to improve debugging of some common
   scenarios

 - two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
   mount parsing error)

* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: add dynamic trace point for session setup key expired failures
  smb3: add four dynamic tracepoints for copy_file_range and reflink
  smb3: add dynamic tracepoint for reflink errors
  cifs: mount with "unix" mount option for SMB1 incorrectly handled
  cifs: fix reconnect with SMB1 UNIX Extensions
  cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
     - Fix request without payloads cleanup  (Leon)
     - Use new protection information format (Francis)
     - Improved debug message for lost pci link (Bart)
     - Another apst quirk (Wang)
     - Use appropriate sysfs api for printing chars (Markus)

 - ublk async device deletion fix (Ming)

 - drbd kerneldoc fixups (Simon)

 - Fix deadlock between sd removal and release (Yang)

* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
  nvme-pci: add missing condition check for existence of mapped data
  ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
  block: fix deadlock between sd_remove & sd_release
  drbd: Add peer_device to Kernel doc
  nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
  nvme-pci: Fix the instructions for disabling power management
  nvme: remove redundant bdev local variable
  nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
  nvme/pci: Add APST quirk for Lenovo N60z laptop

Pull io_uring fixes from Jens Axboe:

 - Fix a syzbot issue for the msg ring cache added in this release. No
   ill effects from this one, but it did make KMSAN unhappy (me)

 - Sanitize the NAPI timeout handling, by unifying the value handling
   into all ktime_t rather than converting back and forth (Pavel)

 - Fail NAPI registration for IOPOLL rings, it's not supported (Pavel)

 - Fix a theoretical issue with ring polling and cancelations (Pavel)

 - Various little cleanups and fixes (Pavel)

* tag 'io_uring-6.11-20240726' of git://git.kernel.dk/linux:
  io_uring/napi: pass ktime to io_napi_adjust_timeout
  io_uring/napi: use ktime in busy polling
  io_uring/msg_ring: fix uninitialized use of target_req->flags
  io_uring: align iowq and task request error handling
  io_uring: kill REQ_F_CANCEL_SEQ
  io_uring: simplify io_uring_cmd return
  io_uring: fix io_match_task must_hold
  io_uring: don't allow netpolling with SETUP_IOPOLL
  io_uring: tighten task exit cancellations

Pull vfs fixes from Christian Brauner:
 "This contains two fixes for this merge window:

  VFS:

   - I noticed that it is possible for a privileged user to mount most
     filesystems with a non-initial user namespace in sb->s_user_ns.

     When fsopen() is called in a non-init namespace the caller's
     namespace is recorded in fs_context->user_ns. If the returned file
     descriptor is then passed to a process privileged in init_user_ns,
     that process can call fsconfig(fd_fs, FSCONFIG_CMD_CREATE*),
     creating a new superblock with sb->s_user_ns set to the namespace
     of the process which called fsopen().

     This is problematic as only filesystems that raise FS_USERNS_MOUNT
     are known to be able to support a non-initial s_user_ns. Others may
     suffer security issues, on-disk corruption or outright crash the
     kernel. Prevent that by restricting such delegation to filesystems
     that allow FS_USERNS_MOUNT.

     Note, that this delegation requires a privileged process to
     actually create the superblock so either the privileged process is
     cooperaing or someone must have tricked a privileged process into
     operating on a fscontext file descriptor whose origin it doesn't
     know (a stupid idea).

     The bug dates back to about 5 years afaict.

  Misc:

   - Fix hostfs parsing when the mount request comes in via the legacy
     mount api.

     In the legacy mount api hostfs allows to specify the host directory
     mount without any key.

     Restore that behavior"

* tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  hostfs: fix the host directory parse when mounting.
  fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT

Pull Rust updates from Miguel Ojeda:
 "The highlight is the establishment of a minimum version for the Rust
  toolchain, including 'rustc' (and bundled tools) and 'bindgen'.

  The initial minimum will be the pinned version we currently have, i.e.
  we are just widening the allowed versions. That covers three stable
  Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
  plus beta, plus nightly.

  This should already be enough for kernel developers in distributions
  that provide recent Rust compiler versions routinely, such as Arch
  Linux, Debian Unstable (outside the freeze period), Fedora Linux,
  Gentoo Linux (especially the testing channel), Nix (unstable) and
  openSUSE Slowroll and Tumbleweed.

  In addition, the kernel is now being built-tested by Rust's pre-merge
  CI. That is, every change that is attempting to land into the Rust
  compiler is tested against the kernel, and it is merged only if it
  passes. Similarly, the bindgen tool has agreed to build the kernel in
  their CI too.

  Thus, with the pre-merge CI in place, both projects hope to avoid
  unintentional changes to Rust that break the kernel. This means that,
  in general, apart from intentional changes on their side (that we will
  need to workaround conditionally on our side), the upcoming Rust
  compiler versions should generally work.

  In addition, the Rust project has proposed getting the kernel into
  stable Rust (at least solving the main blockers) as one of its three
  flagship goals for 2024H2 [1].

  I would like to thank Niko, Sid, Emilio et al. for their help
  promoting the collaboration between Rust and the kernel.

  Toolchain and infrastructure:

   - Support several Rust toolchain versions.

   - Support several bindgen versions.

   - Remove 'cargo' requirement and simplify 'rusttest', thanks to
     'alloc' having been dropped last cycle.

   - Provide proper error reporting for the 'rust-analyzer' target.

  'kernel' crate:

   - Add 'uaccess' module with a safe userspace pointers abstraction.

   - Add 'page' module with a 'struct page' abstraction.

   - Support more complex generics in workqueue's 'impl_has_work!'
     macro.

  'macros' crate:

   - Add 'firmware' field support to the 'module!' macro.

   - Improve 'module!' macro documentation.

  Documentation:

   - Provide instructions on what packages should be installed to build
     the kernel in some popular Linux distributions.

   - Introduce the new kernel.org LLVM+Rust toolchains.

   - Explain '#[no_std]'.

  And a few other small bits"

Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals [1]

* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
  docs: rust: quick-start: add section on Linux distributions
  rust: warn about `bindgen` versions 0.66.0 and 0.66.1
  rust: start supporting several `bindgen` versions
  rust: work around `bindgen` 0.69.0 issue
  rust: avoid assuming a particular `bindgen` build
  rust: start supporting several compiler versions
  rust: simplify Clippy warning flags set
  rust: relax most deny-level lints to warnings
  rust: allow `dead_code` for never constructed bindings
  rust: init: simplify from `map_err` to `inspect_err`
  rust: macros: indent list item in `paste!`'s docs
  rust: add abstraction for `struct page`
  rust: uaccess: add typed accessors for userspace pointers
  uaccess: always export _copy_[from|to]_user with CONFIG_RUST
  rust: uaccess: add userspace pointers
  kbuild: rust-analyzer: improve comment documentation
  kbuild: rust-analyzer: better error handling
  docs: rust: no_std is used
  rust: alloc: add __GFP_HIGHMEM flag
  rust: alloc: fix typo in docs for GFP_NOWAIT
  ...

Merge tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "Cleanups
   - optimization: try to avoid refing the label in apparmor_file_open
   - remove useless static inline function is_deleted
   - use kvfree_sensitive to free data->data
   - fix typo in kernel doc

  Bug fixes:
   - unpack transition table if dfa is not present
   - test: add MODULE_DESCRIPTION()
   - take nosymfollow flag into account
   - fix possible NULL pointer dereference
   - fix null pointer deref when receiving skb during sock creation"

* tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: unpack transition table if dfa is not present
  apparmor: try to avoid refing the label in apparmor_file_open
  apparmor: test: add MODULE_DESCRIPTION()
  apparmor: take nosymfollow flag into account
  apparmor: fix possible NULL pointer dereference
  apparmor: fix typo in kernel doc
  apparmor: remove useless static inline function is_deleted
  apparmor: use kvfree_sensitive to free data->data
  apparmor: Fix null pointer deref when receiving skb during sock creation

Merge tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux

Pull landlock fix from Mickaël Salaün:
 "Jann Horn reported a sandbox bypass for Landlock. This includes the
  fix and new tests. This should be backported"

* tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Add cred_transfer test
  landlock: Don't lose track of restrictions on cred_transfer

Pull gpio fix from Bartosz Golaszewski:

 - don't use sprintf() with non-constant format string

* tag 'gpio-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: virtuser: avoid non-constant format string

Pull more devicetree updates from Rob Herring:
 "Most of this is a treewide change to of_property_for_each_u32() which
  was small enough to do in one go before rc1 and avoids the need to
  create of_property_for_each_u32_some_new_name().

   - Treewide conversion of of_property_for_each_u32() to drop internal
     arguments making struct property opaque

   - Add binding for Amlogic A4 SoC watchdog

   - Fix constraints for AD7192 'single-channel' property"

* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
  of: remove internal arguments from of_property_for_each_u32()
  dt-bindings: watchdog: add support for Amlogic A4 SoCs

Pull iommu fixes from Will Deacon:
 "We're still resolving a regression with the handling of unexpected
  page faults on SMMUv3, but we're not quite there with a fix yet.

   - Fix NULL dereference when freeing domain in Unisoc SPRD driver

   - Separate assignment statements with semicolons in AMD page-table
     code

   - Fix Tegra erratum workaround when the CPU is using 16KiB pages"

* tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
  iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappings
  iommu/amd: Convert comma to semicolon
  iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en

Merge tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "The recent integration of compiler collections introduced the
  technology to check flexible array length at runtime by providing
  proper annotations. In v6.10 kernel, a patch was merged into firewire
  subsystem to utilize it, however the annotation was inadequate.

  There is also the related change for the flexible array in sound
  subsystem, but it causes a regression where the data in the payload of
  isochronous packet is incorrect for some devices. These bugs are now
  fixed"

* tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
  Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"

Pull spi fixes from Mark Brown:
 "The bulk of this is a series of fixes for the microchip-core driver
  mostly originating from one of their customers, I also applied an
  additional patch adding support for controlling the word size which
  came along with it since it's still the merge window and clearly had a
  bunch of fairly thorough testing.

  We also have a fix for the compatible used to bind spidev to the
  BH2228FV"

* tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spidev: add correct compatible for Rohm BH2228FV
  dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
  spi: microchip-core: add support for word sizes of 1 to 32 bits
  spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
  spi: microchip-core: fix init function not setting the master and motorola modes
  spi: microchip-core: only disable SPI controller when register value change requires it
  spi: microchip-core: defer asserting chip select until just before write to TX FIFO
  spi: microchip-core: fix the issues in the isr

Merge tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "These two commits clean up the excessively loose dependencies for the
  RZG2L USB VBCTRL regulator driver, ensuring it shouldn't prompt for
  people who can't use it"

* tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Further restrict RZG2L USB VBCTRL regulator dependencies
  regulator: renesas-usb-vbus-regulator: Update the default

Merge tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
 "Arnd sent a workaround for a false positive warning which was showing
  up with GCC 14.1"

* tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: maple: work around gcc-14.1 false-positive warning

Pull clk fixes from Stephen Boyd:
 "A few clk driver fixes for the merge window to fix the build and boot
  on some SoCs.

   - Initialize struct clk_init_data in the TI da8xx-cfgchip driver so
     that stack contents aren't used for things like clk flags leading
     to unexpected behavior

   - Don't leak stack contents in a debug print in the new Sophgo clk
     driver

   - Disable the new T-Head clk driver on 32-bit targets to fix the
     build due to a division

   - Fix Samsung Exynos4 fin_pll wreckage from the clkdev rework done
     last cycle by using a struct clk_hw directly instead of a struct
     clk consumer"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: samsung: fix getting Exynos4 fin_pll rate from external clocks
  clk: T-Head: Disable on 32-bit Targets
  clk: sophgo: clk-sg2042-pll: Fix uninitialized variable in debug output
  clk: davinci: da8xx-cfgchip: Initialize clk_init_data before use

Pull i3c updates from Alexandre Belloni:
 "This cycle, there are new features for the Designware controller and
  fixes for the other IPs:

   - dw: optional apb clock and power management support, IBI handling
     fixes

   - mipi-i3c-hci: IBI handling fixes

   - svc: a few fixes"

* tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  dt-bindings: i3c: add header for generic I3C flags
  i3c: master: svc: Fix error code in svc_i3c_master_do_daa_locked()
  i3c: master: Enhance i3c_bus_type visibility for device searching & event monitoring
  i3c: dw: Add power management support
  i3c: dw: Add some functions for reusability
  i3c: dw: Save timing registers and other values
  i3c: master: svc: Improve DAA STOP handle code logic
  i3c: dw: Add optional apb clock
  i3c: dw: Use new *_enabled clk API
  dt-bindings: i3c: dw: Add apb clock binding
  i3c: master: svc: Convert comma to semicolon
  i3c: mipi-i3c-hci: Round IBI data chunk size to HW supported value
  i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
  i3c: mipi-i3c-hci: Set IBI Status and Data Ring base addresses
  i3c: mipi-i3c-hci: Switch to lower_32_bits()/upper_32_bits() helpers
  i3c: dw: Remove ibi_capable property
  i3c: dw: Fix IBI intr programming
  i3c: dw: Fix clearing queue thld
  i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1
  i3c: master: svc: resend target address when get NACK