Add links to the Bugzilla component that's used to track KASAN and KCOV
issues.

Link: https://lkml.kernel.org/r/20241012225524.117871-1-andrey.konovalov@linux.devSigned-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We (or rather, readahead logic :) ) might be allocating a THP in the
pagecache and then try mapping it into a process that explicitly disabled
THP: we might end up installing PMD mappings.

This is a problem for s390x KVM, which explicitly remaps all PMD-mapped
THPs to be PTE-mapped in s390_enable_sie()->thp_split_mm(), before
starting the VM.

For example, starting a VM backed on a file system with large folios
supported makes the VM crash when the VM tries accessing such a mapping
using KVM.

Is it also a problem when the HW disabled THP using
TRANSPARENT_HUGEPAGE_UNSUPPORTED?  At least on x86 this would be the case
without X86_FEATURE_PSE.

In the future, we might be able to do better on s390x and only disallow
PMD mappings -- what s390x and likely TRANSPARENT_HUGEPAGE_UNSUPPORTED
really wants.  For now, fix it by essentially performing the same check as
would be done in __thp_vma_allowable_orders() or in shmem code, where this
works as expected, and disallow PMD mappings, making us fallback to PTE
mappings.

Link: https://lkml.kernel.org/r/20241011102445.934409-3-david@redhat.com
Fixes: 793917d9 ("mm/readahead: Add large folio readahead")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Leo Fu <bfu@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "mm: don't install PMD mappings when THPs are disabled by the
hw/process/vma".

During testing, it was found that we can get PMD mappings in processes
where THP (and more precisely, PMD mappings) are supposed to be disabled. 
While it works as expected for anon+shmem, the pagecache is the
problematic bit.

For s390 KVM this currently means that a VM backed by a file located on
filesystem with large folio support can crash when KVM tries accessing the
problematic page, because the readahead logic might decide to use a
PMD-sized THP and faulting it into the page tables will install a PMD
mapping, something that s390 KVM cannot tolerate.

This might also be a problem with HW that does not support PMD mappings,
but I did not try reproducing it.

Fix it by respecting the ways to disable THPs when deciding whether we can
install a PMD mapping.  khugepaged should already be taking care of not
collapsing if THPs are effectively disabled for the hw/process/vma.


This patch (of 2):

Add vma_thp_disabled() and thp_disabled_by_hw() helpers to be shared by
shmem_allowable_huge_orders() and __thp_vma_allowable_orders().

[david@redhat.com: rename to vma_thp_disabled(), split out thp_disabled_by_hw() ]
Link: https://lkml.kernel.org/r/20241011102445.934409-2-david@redhat.com
Fixes: 793917d9 ("mm/readahead: Add large folio readahead")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Leo Fu <bfu@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Boqiao Fu <bfu@redhat.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

DAMON GitHub repos have moved from awslabs GitHub org to damonitor org[1].
Following the change, URLs on documents are also updated[2].  However,
commit 2e9b3d6e ("Docs/damon/maintainer-profile: add links in place"),
which was added just after the update, was using the deprecated GitHub
URLs.  Update those to use damonitor GitHub URLs instead.

[1] https://lore.kernel.org/20240813232158.83903-1-sj@kernel.org
[2] https://lore.kernel.org/20240826015741.80707-2-sj@kernel.org

Link: https://lkml.kernel.org/r/20241011170154.70651-3-sj@kernel.org
Fixes: 2e9b3d6e ("Docs/damon/maintainer-profile: add links in place")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Docs/damon/maintainer-profile: a couple of minor hotfixes".

DAMON maintainer-profile.rst file patches[1] that were merged into the
v6.12-rc1 have a couple of minor mistakes.  Fix those.

[1] https://lore.kernel.org/20240826015741.80707-1-sj@kernel.org


This patch (of 2):

Links to external web pages on DAMON's maintainer-profile.rst are missing
'_' suffixes.  As a result, rendered document is having only verbose URLs
that cannot be clicked.  Fix those.

Also, update the link texts for git trees to contain the names of the
trees, for better readability and avoiding below Sphinx warning.

    maintainer-profile.rst:4: WARNING: Duplicate explicit target name: "tree".

Link: https://lkml.kernel.org/r/20241011170154.70651-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20241011170154.70651-2-sj@kernel.org
Fixes: 2e9b3d6e ("Docs/damon/maintainer-profile: add links in place")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

It is possible for a bulk operation (MA_STATE_BULK is set) to enter the
new_end < mt_min_slots[type] case and set wr_rebalance as a store type. 
This is incorrect as bulk stores do not rebalance per write, but rather
after the all of the writes are done through the mas_bulk_rebalance()
path.  Therefore, add a check to make sure MA_STATE_BULK is not set before
we return wr_rebalance as the store type.

Also add a test to make sure wr_rebalance is never the store type when
doing bulk operations via mas_expected_entries()

This is a hotfix for this rc however it has no userspace effects as there
are no users of the bulk insertion mode.

Link: https://lkml.kernel.org/r/20241011214451.7286-1-sidhartha.kumar@oracle.com
Fixes: 5d659bbb ("maple_tree: introduce mas_wr_store_type()")
Suggested-by: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Sidhartha <sidhartha.kumar@oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The "addr" and "is_shmem" arguments have different order in TP_PROTO and
TP_ARGS.  This resulted in the incorrect trace result:

text-hugepage-644429 [276] 392092.878683: mm_khugepaged_collapse_file:
mm=0xffff20025d52c440, hpage_pfn=0x200678c00, index=512, addr=1, is_shmem=0,
filename=text-hugepage, nr=512, result=failed

The value of "addr" is wrong because it was treated as bool value, the
type of is_shmem.

Fix the order in TP_PROTO to keep "addr" is before "is_shmem" since the
original patch review suggested this order to achieve best packing.

And use "lx" for "addr" instead of "ld" in TP_printk because address is
typically shown in hex.

After the fix, the trace result looks correct:

text-hugepage-7291  [004]   128.627251: mm_khugepaged_collapse_file:
mm=0xffff0001328f9500, hpage_pfn=0x20016ea00, index=512, addr=0x400000,
is_shmem=0, filename=text-hugepage, nr=512, result=failed

Link: https://lkml.kernel.org/r/20241012011702.1084846-1-yang@os.amperecomputing.com
Fixes: 4c9473e8 ("mm/khugepaged: add tracepoint to collapse_file()")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Cc: Gautam Menghani <gautammenghani201@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>    [6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The sysfs_target->regions allocated in damon_sysfs_regions_alloc() is not
freed in damon_sysfs_test_add_targets(), which cause the following memory
leak, free it to fix it.

	unreferenced object 0xffffff80c2a8db80 (size 96):
	  comm "kunit_try_catch", pid 187, jiffies 4294894363
	  hex dump (first 32 bytes):
	    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
	    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
	  backtrace (crc 0):
	    [<0000000001e3714d>] kmemleak_alloc+0x34/0x40
	    [<000000008e6835c1>] __kmalloc_cache_noprof+0x26c/0x2f4
	    [<000000001286d9f8>] damon_sysfs_test_add_targets+0x1cc/0x738
	    [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac
	    [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec
	    [<00000000adf936cf>] kthread+0x2e8/0x374
	    [<0000000041bb1628>] ret_from_fork+0x10/0x20

Link: https://lkml.kernel.org/r/20241010125323.3127187-1-ruanjinjie@huawei.com
Fixes: b8ee5575 ("mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When can_swapin_thp() is unused, it prevents kernel builds with clang,
`make W=1` and CONFIG_WERROR=y:

mm/memory.c:4184:20: error: unused function 'can_swapin_thp' [-Werror,-Wunused-function]

Fix this by removing the unused stub.

See also commit 6863f564 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").

Link: https://lkml.kernel.org/r/20241008191329.2332346-1-andriy.shevchenko@linux.intel.com
Fixes: 242d12c9 ("mm: support large folios swap-in for sync io devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Barry Song <baohua@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Map my outdated addresses within mailmap.

Link: https://lkml.kernel.org/r/20241009144934.43027-1-andybnac@gmail.comSigned-off-by: Andy Chiu <andybnac@gmail.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Leon Chien <leonchien@synology.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add myself and Liam as co-maintainers of the memory mapping and VMA code
alongside Andrew as we are heavily involved in its implementation and
maintenance.

Link: https://lkml.kernel.org/r/20241009201032.6130-1-lorenzo.stoakes@oracle.comSigned-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show show_smap_vma_flags() has been a using misspelled initializer in
mnemonics[] - it needed to initialize 2 element array of char and it used
NUL-padded 2 character string literals (i.e.  3-element initializer).

This has been spotted by gcc-15[*]; prior to that gcc quietly dropped the
3rd eleemnt of initializers.  To fix this we are increasing the size of
mnemonics[] (from mnemonics[BITS_PER_LONG][2] to
mnemonics[BITS_PER_LONG][3]) to accomodate the NUL-padded string literals.

This also helps us in simplyfying the logic for printing of the flags as
instead of printing each character from the mnemonics[], we can just print
the mnemonics[] using seq_printf.

[*]: fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
  917 |                 [0 ... (BITS_PER_LONG-1)] = "??",
      |                                                 ^~~~
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
fs/proc/task_mmu.c:917:49: error: initializer-string for array of `char' is too long [-Werror=unterminate d-string-initialization]
...


Stephen pointed out:

: The C standard explicitly allows for a string initializer to be too long
: due to the NUL byte at the end ...  so this warning may be overzealous.

but let's make the warning go away anwyay.

Link: https://lkml.kernel.org/r/20241005063700.2241027-1-brahmajit.xyz@gmail.com
Link: https://lkml.kernel.org/r/20241003093040.47c08382@canb.auug.org.auSigned-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Ben Greear reports following splat:
 ------------[ cut here ]------------
 net/netfilter/nf_nat_core.c:1114 module nf_nat func:nf_nat_register_fn has 256 allocated at module unload
 WARNING: CPU: 1 PID: 10421 at lib/alloc_tag.c:168 alloc_tag_module_unload+0x22b/0x3f0
 Modules linked in: nf_nat(-) btrfs ufs qnx4 hfsplus hfs minix vfat msdos fat
...
 Hardware name: Default string Default string/SKYBAY, BIOS 5.12 08/04/2020
 RIP: 0010:alloc_tag_module_unload+0x22b/0x3f0
  codetag_unload_module+0x19b/0x2a0
  ? codetag_load_module+0x80/0x80

nf_nat module exit calls kfree_rcu on those addresses, but the free
operation is likely still pending by the time alloc_tag checks for leaks.

Wait for outstanding kfree_rcu operations to complete before checking
resolves this warning.

Reproducer:
unshare -n iptables-nft -t nat -A PREROUTING -p tcp
grep nf_nat /proc/allocinfo # will list 4 allocations
rmmod nft_chain_nat
rmmod nf_nat                # will WARN.

[akpm@linux-foundation.org: add comment]
Link: https://lkml.kernel.org/r/20241007205236.11847-1-fw@strlen.de
Fixes: a4735739 ("lib: code tagging module support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reported-by: Ben Greear <greearb@candelatech.com>
Closes: https://lore.kernel.org/netdev/bdaaef9d-4364-4171-b82b-bcfc12e207eb@candelatech.com/
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In mremap(), move_page_tables() looks at the type of the PMD entry and the
specified address range to figure out by which method the next chunk of
page table entries should be moved.

At that point, the mmap_lock is held in write mode, but no rmap locks are
held yet.  For PMD entries that point to page tables and are fully covered
by the source address range, move_pgt_entry(NORMAL_PMD, ...) is called,
which first takes rmap locks, then does move_normal_pmd(). 
move_normal_pmd() takes the necessary page table locks at source and
destination, then moves an entire page table from the source to the
destination.

The problem is: The rmap locks, which protect against concurrent page
table removal by retract_page_tables() in the THP code, are only taken
after the PMD entry has been read and it has been decided how to move it. 
So we can race as follows (with two processes that have mappings of the
same tmpfs file that is stored on a tmpfs mount with huge=advise); note
that process A accesses page tables through the MM while process B does it
through the file rmap:

process A                      process B
=========                      =========
mremap
  mremap_to
    move_vma
      move_page_tables
        get_old_pmd
        alloc_new_pmd
                      *** PREEMPT ***
                               madvise(MADV_COLLAPSE)
                                 do_madvise
                                   madvise_walk_vmas
                                     madvise_vma_behavior
                                       madvise_collapse
                                         hpage_collapse_scan_file
                                           collapse_file
                                             retract_page_tables
                                               i_mmap_lock_read(mapping)
                                               pmdp_collapse_flush
                                               i_mmap_unlock_read(mapping)
        move_pgt_entry(NORMAL_PMD, ...)
          take_rmap_locks
          move_normal_pmd
          drop_rmap_locks

When this happens, move_normal_pmd() can end up creating bogus PMD entries
in the line `pmd_populate(mm, new_pmd, pmd_pgtable(pmd))`.  The effect
depends on arch-specific and machine-specific details; on x86, you can end
up with physical page 0 mapped as a page table, which is likely
exploitable for user->kernel privilege escalation.

Fix the race by letting process B recheck that the PMD still points to a
page table after the rmap locks have been taken.  Otherwise, we bail and
let the caller fall back to the PTE-level copying path, which will then
bail immediately at the pmd_none() check.

Bug reachability: Reaching this bug requires that you can create
shmem/file THP mappings - anonymous THP uses different code that doesn't
zap stuff under rmap locks.  File THP is gated on an experimental config
flag (CONFIG_READ_ONLY_THP_FOR_FS), so on normal distro kernels you need
shmem THP to hit this bug.  As far as I know, getting shmem THP normally
requires that you can mount your own tmpfs with the right mount flags,
which would require creating your own user+mount namespace; though I don't
know if some distros maybe enable shmem THP by default or something like
that.

Bug impact: This issue can likely be used for user->kernel privilege
escalation when it is reachable.

Link: https://lkml.kernel.org/r/20241007-move_normal_pmd-vs-collapse-fix-2-v1-1-5ead9631f2ea@google.com
Fixes: 1d65b771 ("mm/khugepaged: retract_page_tables() without mmap or vma lock")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Closes: https://project-zero.issues.chromium.org/371047675Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Arnd reported a build failure due to the BUILD_BUG_ON() statement in
alloc_kmem_cache_cpus().  The test

  PERCPU_DYNAMIC_EARLY_SIZE < NR_KMALLOC_TYPES * KMALLOC_SHIFT_HIGH * sizeof(struct kmem_cache_cpu)

The factors that increase the right side of the equation:
- PAGE_SIZE > 4KiB increases KMALLOC_SHIFT_HIGH
- For the local_lock_t in kmem_cache_cpu:
  - PREEMPT_RT adds an actual lock.
  - LOCKDEP increases the size of the lock.
  - LOCK_STAT adds additional bytes plus padding to the lockdep
    structure.

The net difference with and without PREEMPT_RT is 88 bytes for the
lock_lock_t, 96 bytes for kmem_cache_cpu due to additional padding.  This
is enough to exceed the 80KiB limit with 16KiB page size - the 8KiB page
size is fine.

Increase PERCPU_DYNAMIC_SIZE_SHIFT to 13 on configs with PAGE_SIZE larger
than 4KiB and LOCKDEP enabled.

Link: https://lkml.kernel.org/r/20241007143049.gyMpEu89@linutronix.de
Fixes: d8fccd9c ("arm64: Allow to enable PREEMPT_RT.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410020326.iaZIteIx-lkp@intel.com/Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/20241004095702.637528-1-arnd@kernel.orgAcked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

On Android with arm, there is some synchronization needed to avoid a
deadlock when forking after pthread_create.

Link: https://lkml.kernel.org/r/20241003211716.371786-3-edliaw@google.com
Fixes: cff29458 ("selftests/mm: extend and rename uffd pagemap test")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "selftests/mm: fix deadlock after pthread_create".

On Android arm, pthread_create followed by a fork caused a deadlock in the
case where the fork required work to be completed by the created thread.

Update the synchronization primitive to use pthread_barrier instead of
atomic_bool.

Apply the same fix to the wp-fork-with-event test.


This patch (of 2):

Swap synchronization primitive with pthread_barrier, so that stdatomic.h
does not need to be included.

The synchronization is needed on Android ARM64; we see a deadlock with
pthread_create when the parent thread races forward before the child has a
chance to start doing work.

Link: https://lkml.kernel.org/r/20241003211716.371786-1-edliaw@google.com
Link: https://lkml.kernel.org/r/20241003211716.371786-2-edliaw@google.com
Fixes: cff29458 ("selftests/mm: extend and rename uffd pagemap test")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

syszbot produced this with a corrupted fs image.  In theory, however an IO
error would trigger this also.

This affects just an error report, so should not be a serious error.

Link: https://lkml.kernel.org/r/87r08wjsnh.fsf@mail.parknet.co.jp
Link: https://lkml.kernel.org/r/66ff2c95.050a0220.49194.03e9.GAE@google.comSigned-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: syzbot+ef0d7bc412553291aa86@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Syzbot reported that a task hang occurs in vcs_open() during a fuzzing
test for nilfs2.

The root cause of this problem is that in nilfs_find_entry(), which
searches for directory entries, ignores errors when loading a directory
page/folio via nilfs_get_folio() fails.

If the filesystem images is corrupted, and the i_size of the directory
inode is large, and the directory page/folio is successfully read but
fails the sanity check, for example when it is zero-filled,
nilfs_check_folio() may continue to spit out error messages in bursts.

Fix this issue by propagating the error to the callers when loading a
page/folio fails in nilfs_find_entry().

The current interface of nilfs_find_entry() and its callers is outdated
and cannot propagate error codes such as -EIO and -ENOMEM returned via
nilfs_find_entry(), so fix it together.

Link: https://lkml.kernel.org/r/20241004033640.6841-1-konishi.ryusuke@gmail.com
Fixes: 2ba466d7 ("nilfs2: directory entry operations")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Lizhi Xu <lizhi.xu@windriver.com>
Closes: https://lkml.kernel.org/r/20240927013806.3577931-1-lizhi.xu@windriver.com
Reported-by: syzbot+8a192e8d090fa9a31135@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a192e8d090fa9a31135
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Commit f8d112a4 ("mm/mmap: avoid zeroing vma tree in mmap_region()")
changed how error handling is performed in mmap_region().

The error value defaults to -ENOMEM, but then gets reassigned immediately
to the result of vms_gather_munmap_vmas() if we are performing a MAP_FIXED
mapping over existing VMAs (and thus unmapping them).

This overwrites the error value, potentially clearing it.

After this, we invoke may_expand_vm() and possibly vm_area_alloc(), and
check to see if they failed. If they do so, then we perform error-handling
logic, but importantly, we do NOT update the error code.

This means that, if vms_gather_munmap_vmas() succeeds, but one of these
calls does not, the function will return indicating no error, but rather an
address value of zero, which is entirely incorrect.

Correct this and avoid future confusion by strictly setting error on each
and every occasion we jump to the error handling logic, and set the error
code immediately prior to doing so.

This way we can see at a glance that the error code is always correct.

Many thanks to Vegard Nossum who spotted this issue in discussion around
this problem.

Link: https://lkml.kernel.org/r/20241002073932.13482-1-lorenzo.stoakes@oracle.com
Fixes: f8d112a4 ("mm/mmap: avoid zeroing vma tree in mmap_region()")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull smb client fixes from Steve French:
 "Two fixes for Windows symlink handling"

* tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix creating native symlinks pointing to current or parent directory
  cifs: Improve creating native symlinks pointing to directory

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for some reported problems for 6.12-rc3.
  Include in here is:

   - fix for yurex driver that was caused in -rc1

   - build error fix for usbg network filesystem code

   - onboard_usb_dev build fix

   - dwc3 driver fixes for reported errors

   - gadget driver fix

   - new USB storage driver quirk

   - xhci resume bugfix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  net/9p/usbg: Fix build error
  USB: yurex: kill needless initialization in yurex_read
  Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant"
  usb: xhci: Fix problem with xhci resume from suspend
  usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support
  usb: dwc3: core: Stop processing of pending events if controller is halted
  usb: dwc3: re-enable runtime PM after failed resume
  usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip
  usb: gadget: core: force synchronous registration

Merge tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here is a single driver core fix, and a .mailmap update.

  The fix is for the rust driver core bindings, turned out that the
  from_raw binding wasn't a good idea (don't want to pass a pointer to a
  reference counted object without actually incrementing the pointer.)
  So this change fixes it up as the from_raw binding came in in -rc1.

  The other change is a .mailmap update.

  Both have been in linux-next for a while with no reported issues"

* tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  mailmap: update mail for Fiona Behrens
  rust: device: change the from_raw() function

Pull powerpc fix from Michael Ellerman:

 - Fix crash in memcpy on 8xx due to dcbz workaround since recent
   changes

Thanks to Christophe Leroy.

* tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/8xx: Fix kernel DTLB miss on dcbz

Pull SCSI fixes from James Bottomley:
 "Four small fixes, three in drivers and one in the FC transport class
  to add idempotence to state setting"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_transport_fc: Allow setting rport state to current state
  scsi: wd33c93: Don't use stale scsi_pointer value
  scsi: fnic: Move flush_work initialization out of if block
  scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()

Merge tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Add missing dependencies on REGMAP_I2C for several drivers

 - Fix memory leak in adt7475 driver

 - Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon
   driver to match other sensor labels

* tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (max1668) Add missing dependency on REGMAP_I2C
  hwmon: (ltc2991) Add missing dependency on REGMAP_I2C
  hwmon: (adt7470) Add missing dependency on REGMAP_I2C
  hwmon: (adm9240) Add missing dependency on REGMAP_I2C
  hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C
  hwmon: (tmp513) Add missing dependency on REGMAP_I2C
  hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config()
  hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature

Merge tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Fixes for build, run-time errors, and reporting errors:

   - ftrace: regression test for a kernel crash when running function
     graph tracing and then enabling function profiler.

   - rseq: fix for mm_cid test failure.

   - vDSO:
      - fixes to reporting skip and other error conditions
      - changes unconditionally build chacha and getrandom tests on all
        architectures to make it easier for them to run in CIs
      - build error when sched.h to bring in CLONE_NEWTIME define"

* tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  ftrace/selftest: Test combination of function_graph tracer and function profiler
  selftests/rseq: Fix mm_cid test failure
  selftests: vDSO: Explicitly include sched.h
  selftests: vDSO: improve getrandom and chacha error messages
  selftests: vDSO: unconditionally build getrandom test
  selftests: vDSO: unconditionally build chacha test

Pull devicetree fixes from Rob Herring:

 - Disable kunit tests for arm64+ACPI

 - Fix refcount issue in kunit tests

 - Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq

 - Drop type ref on 'msi-parent in fsl,qoriq-mc binding

 - Move elgin,jg10309-01 to its own binding from trivial-devices

* tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: Skip kunit tests when arm64+ACPI doesn't populate root node
  of: Fix unbalanced of node refcount and memory leaks
  dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
  dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent
  dt-bindings: display: elgin,jg10309-01: Add own binding

Pull fbdev platform driver fix from Helge Deller:
 "Switch fbdev drivers back to struct platform_driver::remove()

  Now that 'remove()' has been converted to the sane new API, there's
  no reason for the 'remove_new()' use, so this converts back to the
  traditional and simpler name.

  See commits

     5c5a7680 ("platform: Provide a remove callback that returns no value")
     0edb555a ("platform: Make platform_driver::remove() return void")

  for background to this all"

* tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: Switch back to struct platform_driver::remove()

Pull gpio fixes from Bartosz Golaszewski:

 - fix clock handle leak in probe() error path in gpio-aspeed

 - add a dummy register read to ensure the write actually completed

* tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: aspeed: Use devm_clk api to manage clock source
  gpio: aspeed: Add the flush write to ensure the write complete.

Pull NFS client fixes from Anna Schumaker:
 "Localio Bugfixes:
   - remove duplicated include in localio.c
   - fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
   - fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
   - fix nfsd_file tracepoints to handle NULL rqstp pointers

  Other Bugfixes:
   - fix program selection loop in svc_process_common
   - fix integer overflow in decode_rc_list()
   - prevent NULL-pointer dereference in nfs42_complete_copies()
   - fix CB_RECALL performance issues when using a large number of
     delegations"

* tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: remove revoked delegation from server's delegation list
  nfsd/localio: fix nfsd_file tracepoints to handle NULL rqstp
  nfs_common: fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
  nfs_common: fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
  NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
  SUNRPC: Fix integer overflow in decode_rc_list()
  sunrpc: fix prog selection loop in svc_process_common
  nfs: Remove duplicated include in localio.c

Pull RCU fix from Neeraj Upadhyay:
 "Fix rcuog kthread wakeup invocation from softirq context on a CPU
  which has been marked offline.

  This can happen when new callbacks are enqueued from a softirq on an
  offline CPU before it calls rcutree_report_cpu_dead(). When this
  happens on NOCB configuration, the rcuog wake-up is deferred through
  an IPI to an online CPU. This is done to avoid call into the scheduler
  which can risk arming the RT-bandwidth after hrtimers have been
  migrated out and disabled.

  However, doing IPI call from softirq is not allowed: Fix this by
  forcing deferred rcuog wakeup through the NOCB timer when the CPU is
  offline"

* tag 'rcu.fixes.6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
  rcu/nocb: Fix rcuog wake-up from offline softirq

Pull xen fix from Juergen Gross:
 "A fix for topology information of Xen PV guests"

* tag 'for-linus-6.12a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: mark boot CPU of PV guest in MSR_IA32_APICBASE

Masami reported a bug when running function graph tracing then the
function profiler. The following commands would cause a kernel crash:

  # cd /sys/kernel/tracing/
  # echo function_graph > current_tracer
  # echo 1 > function_profile_enabled

In that order. Create a test to test this two to make sure this does not
come back as a regression.

Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2

Link: https://lore.kernel.org/all/20241010165235.35122877@gandalf.local.home/Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by:

glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)")

Without this fix, rseq selftests for mm_cid fail:

./run_param_test.sh
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running mm_cid test spinlock
Error: cpu id getter unavailable

Fixes: 18c23558 ("selftests/rseq: Implement rseq mm_cid field support")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
CC: Carlos O'Donell <carlos@redhat.com>
CC: Florian Weimer <fweimer@redhat.com>
CC: linux-kselftest@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Pull io_uring fixes from Jens Axboe:

 - Explicitly have a mshot_finished condition for IORING_OP_RECV in
   multishot mode, similarly to what IORING_OP_RECVMSG has. This doesn't
   fix a bug right now, but it makes it harder to actually have a bug
   here if a request takes multiple iterations to finish.

 - Fix handling of retry of read/write of !FMODE_NOWAIT files. If they
   are pollable, that's all we need.

* tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux:
  io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT
  io_uring/rw: fix cflags posting for single issue multishot read

Pull power management fixes from Rafael Wysocki:
 "These address two issues in the TPMI module of the Intel RAPL power
  capping driver and one issue in the processor part of the Intel
  int340x thermal driver, update a CPU ID list and register definitions
  needed for RAPL PL4 support and remove some unused code.

  Specifics:

   - Fix the TPMI_RAPL_REG_DOMAIN_INFO register offset in the TPMI part
     of the Intel RAPL power capping driver, make it ignore minor
     hardware version mismatches (which only indicate exposing
     additional features) and update register definitions in it to
     enable PL4 support (Zhang Rui)

   - Add Arrow Lake-U to the list of processors supporting PL4 in the
     MSR part of the Intel RAPL power capping driver (Sumeet Pawnikar)

   - Remove excess pci_disable_device() calls from the processor part of
     the int340x thermal driver to address a warning triggered during
     module unload and remove unused CPU hotplug code related to RAPL
     support from it (Zhang Rui)"

* tag 'pm-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: int340x: processor: Add MMIO RAPL PL4 support
  thermal: intel: int340x: processor: Remove MMIO RAPL CPU hotplug support
  powercap: intel_rapl_msr: Add PL4 support for Arrowlake-U
  powercap: intel_rapl_tpmi: Ignore minor version change
  thermal: intel: int340x: processor: Fix warning during module unload
  powercap: intel_rapl_tpmi: Fix bogus register reading

Pull thermal control fixes from Rafael Wysocki:
 "Address possible use-after-free scenarios during the processing of
  thermal netlink commands and during thermal zone removal (Rafael
  Wysocki)"

* tag 'thermal-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Free tzp copy along with the thermal zone
  thermal: core: Reference count the zone in thermal_zone_get_by_id()

Pull ACPI fixes from Rafael Wysocki:
 "Reduce the number of ACPI IRQ override DMI quirks by combining quirks
  that cover similar systems while making them cover additional models
  at the same time (Hans de Goede)"

* tag 'acpi-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Fold Asus Vivobook Pro N6506M* DMI quirks together
  ACPI: resource: Fold Asus ExpertBook B1402C* and B1502C* DMI quirks together
  ACPI: resource: Make Asus ExpertBook B2502 matches cover more models
  ACPI: resource: Make Asus ExpertBook B2402 matches cover more models