- 30 Sep, 2010 5 commits
-
-
Andres Salomon authored
This comment about killing power to the backlight is ancient, and incorrect (the code that follows actually does the opposite of what the comment says). This was due to hardware changes; the comment was for the original OLPC GX2 boards, but when the OLPC LX boards came out, the code was updated for that hardware. Signed-off-by:
Andres Salomon <dilinger@queued.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Andres Salomon authored
Add and populate a TODO file for the olpc_dcon driver. Signed-off-by:
-
Andres Salomon authored
The vx855 stuff isn't upstream yet; for now, drop support for XO-1.5. This will come back once the 1.5 code is in place (and will be in a form that allows both 1.0 and 1.5 support to be compiled in at the same time), but for now just remove it. This is necessary to get the driver building. Signed-off-by:
-
Andres Salomon authored
...Rather than macros that don't exist. Necessary for building the driver. Signed-off-by:
-
Andres Salomon authored
This adds DCON support for the OLPC XO. The DCON is found in XO-1 and XO-1.5 hardware. The XO-1 has a CS5536 southbridge, while the XO-1.5 has a Via chipset; the GPIO magic that's necessary to communicate with the DCON chip is unfortunately different across both platforms. This driver supports both. This driver is in bad state atm, so I'm requesting its inclusion into staging so it can be cleaned up while staying in the kernel tree. Original driver by Dave Woodhouse, and modified extensively by Jordan Crouse, myself, Deepak Saxena, Paul Fox, Daniel Drake, and probably others that I've missed. Signed-off-by:
-
- 27 Sep, 2010 3 commits
-
-
Justin P. Mattock authored
The below patch, is a simple fix to a broken web address not using a period in it's name. Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Signed-off-by:
-
Henry Ptasinski authored
Temporary fix until utils get cleaned up. Signed-off-by:
Henry Ptasinski <henryp@broadcom.com> Signed-off-by:
-
Henry Ptasinski authored
Signed-off-by:
-
- 23 Sep, 2010 2 commits
-
-
Greg Kroah-Hartman authored
A single driver shouldn't be overriding the kernel-wide -W options. This removes them from the Makefile. Bonus is that the code at least now will build on a 64bit platform. Problem is that both drivers can't be built at the same time right now or bad things happen when linking. Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Nohee Ko <noheek@broadcom.com> Cc: jason <jason@lakedaemon.net> Signed-off-by: -
Greg Kroah-Hartman authored
Change to use the proper ccflags-y option, as well as splitting the options out one-per-line so that we can see what is needed to be cleaned up and removed over time. Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Nohee Ko <noheek@broadcom.com> Cc: jason <jason@lakedaemon.net> Signed-off-by:
-
- 22 Sep, 2010 5 commits
-
-
Greg Kroah-Hartman authored
The driver hasn't been updated since the .30 kernel release and will not build due to pcmcia api changes. Mark it broken for now so no one hits it in their build accidentally. Cc: Marek Belisko <marek.belisko@gmail.com> Signed-off-by: -
Greg Kroah-Hartman authored
It should not be executable. Cc: Marek Belisko <marek.belisko@gmail.com> Signed-off-by: -
Greg Kroah-Hartman authored
Lots of trailing whitespace was removed Cc: Marek Belisko <marek.belisko@gmail.com> Signed-off-by: -
Greg Kroah-Hartman authored
This fixes the build for the ft100-usb driver so it builds properly. Cc: Marek Belisko <marek.belisko@gmail.com> Signed-off-by: -
Marek Belisko authored
This drivers add support for following devices: (usb)-> Qleadtek FLASH-OFDM USB Modem [LR7F04] -> Qleadtek Express Card -> Leadtek Multi-band modem HSDPA Sources for usb: https://sourceforge.net/projects/ft1000/files/ft1000_usb/ft1000_usb_v01.04.tar.gz/download (pcmcia) -> Multimedia Net Card Sources for pcmcia : https://sourceforge.net/projects/ft1000/files/ft1000_pcmcia_2.6.30-2.6.31.tgz/download More informations (in Slovak language): http://ft1000.qintec.sk/home.htmlSigned-off-by:Marek Belisko <marek.belisko@gmail.com> Signed-off-by:
-
- 21 Sep, 2010 25 commits
-
-
Greg Kroah-Hartman authored
This fixes up all of the remaining coding style issues that make any sense to make in the line6 driver. Cc: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: -
Greg Kroah-Hartman authored
These symbols don't need to be exported as nothing uses them, so don't. Cc: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by: -
Greg Kroah-Hartman authored
As there are symbols that conflict with the in-kernel usb-storage module, we can't build this into the kernel. Reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Al Cho <acho@novell.com> Signed-off-by:
-
Max Vozeler authored
The way the event handler works can cause it to delay events until eventual wakeup for another event. For example, on device detach (vhci): - Write to sysfs detach file -> usbip_event_add(VDEV_EVENT_DOWN) -> wakeup() #define VDEV_EVENT_DOWN (USBIP_EH_SHUTDOWN | USBIP_EH_RESET). - Event thread wakes up and passes the event to event_handler() to process. - It processes and clears the USBIP_EH_SHUTDOWN flag then returns. - The outer event loop (event_handler_loop()) calls wait_event_interruptible(). The processing of the second flag which is part of VDEV_EVENT_DOWN (USBIP_EH_RESET) did not happen yet. It is delayed until the next event. This means the ->reset callback may not happen for a long time (if ever), leaving the usbip port in a weird state which prevents its reuse. This patch changes the handler to process all flags before waiting for another wakeup. I have verified this change to fix a problem which prevented reattach of a usbip device. It also helps for socket errors which missed the RESET as well. The delayed event processing also affects the stub side of usbip and the error handling there. Signed-off-by:Max Vozeler <mvz@vozeler.com> Reported-by:
Marco Lancione <marco@optikam.com> Tested-by:
Luc Jalbert <ljalbert@optikam.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Max Vozeler authored
This patch changes vhci to behave like dummy and other hcds when disconnecting a device. Previously detaching a device from the root hub did not notify the usb core of the disconnect and left the device visible. Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
Mike McCormack <mikem@ring3k.org> Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Tracey Dent authored
Fixed numerous coding style issues using checkpatch.pl Signed-off-by:
Tracey Dent <tdent48227@gmail.com> Signed-off-by:
-
Tracey Dent authored
Fixed numerous coding style issues using checkpatch.pl Signed-off-by:
-
Tracey Dent authored
Fixed numerous coding style issues using checkpatch.pl Signed-off-by:
-
Tracey Dent authored
Fixed numerous coding style issues using checkpatch.pl Signed-off-by:
-
Tracey Dent authored
Fixed numerous coding style issues Signed-off-by:
-
Victor Rosales authored
Just fixed all checkpatch's errors but not the warinings. Signed-off-by:
Victor Rosales <victorhrosales@gmail.com> Signed-off-by:
-
Pekka Enberg authored
The w35und uses atomics such as "ThreadCount" and "FireCount" to emulate locking in the TX paths, for example. Document this bug in the TODO list. Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Pekka Enberg authored
The wbsoft_tx() function is a simple wrapper on top of MLMESendFrame() so inline the latter to the former. Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Pekka Enberg authored
This patch changes MLMESendFrame to return NETDEV_TX_BUSY if MLME frame is in use so that wbsoft_tx() doesn't blindly return NETDEV_TX_OK in that case. Cc: Sandro Bonazzola <sandro.bonazzola@gmail.com> Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
Pekka Enberg authored
This patch removes unused fields from "struct wbsoft_priv". Cc: Lars Lindley <lindley@coyote.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua> Signed-off-by:
-
