- 05 May, 2014 34 commits
-
-
Eric Whitney authored
commit c0634493 upstream. Commit 9cb00419, which enables hole punching for bigalloc file systems, exposed a bug introduced by commit 6ae06ff5 in an earlier release. When run on a bigalloc file system, xfstests generic/013, 068, 075, 083, 091, 100, 112, 127, 263, 269, and 270 fail with e2fsck errors or cause kernel error messages indicating that previously freed blocks are being freed again. The latter commit optimizes the selection of the starting extent in ext4_ext_rm_leaf() when hole punching by beginning with the extent supplied in the path argument rather than with the last extent in the leaf node (as is still done when truncating). However, the code in rm_leaf that initially sets partial_cluster to track cluster sharing on extent boundaries is only guaranteed to run if rm_leaf starts with the last node in the leaf. Consequently, partial_cluster is not correctly initialized when hole punching, and a cluster on the boundary of a punched region that should be retained may instead be deallocated. Signed-off-by:
Eric Whitney <enwlinux@gmail.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Eric Whitney authored
commit ce37c429 upstream. Commit 37794732 breaks the return of error codes from ext4_ext_handle_uninitialized_extents() in ext4_ext_map_blocks(). A portion of the patch assigns that function's signed integer return value to an unsigned int. Consequently, negatively valued error codes are lost and can be treated as a bogus allocated block count. Signed-off-by:
-
Josef Bacik authored
commit 3bbb24b2 upstream. Zach found this deadlock that would happen like this btrfs_end_transaction <- reduce trans->use_count to 0 btrfs_run_delayed_refs btrfs_cow_block find_free_extent btrfs_start_transaction <- increase trans->use_count to 1 allocate chunk btrfs_end_transaction <- decrease trans->use_count to 0 btrfs_run_delayed_refs lock tree block we are cowing above ^^ We need to only decrease trans->use_count if it is above 1, otherwise leave it alone. This will make nested trans be the only ones who decrease their added ref, and will let us get rid of the trans->use_count++ hack if we have to commit the transaction. Thanks, Reported-by:
Zach Brown <zab@redhat.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Tested-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Hidetoshi Seto authored
commit f88ba6a2 upstream. I got an error on v3.13: BTRFS error (device sdf1) in write_all_supers:3378: errno=-5 IO failure (errors while submitting device barriers.) how to reproduce: > mkfs.btrfs -f -d raid1 /dev/sdf1 /dev/sdf2 > wipefs -a /dev/sdf2 > mount -o degraded /dev/sdf1 /mnt > btrfs balance start -f -sconvert=single -mconvert=single -dconvert=single /mnt The reason of the error is that barrier_all_devices() failed to submit barrier to the missing device. However it is clear that we cannot do anything on missing device, and also it is not necessary to care chunks on the missing device. This patch stops sending/waiting barrier if device is missing. Signed-off-by:
Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by:
-
Mark Tinguely authored
commit c88547a8 upstream. Commit f5ea1100 ("xfs: add CRCs to dir2/da node blocks") introduced in 3.10 incorrectly converted the btree hash index array pointer in xfs_da3_fixhashpath(). It resulted in the the current hash always being compared against the first entry in the btree rather than the current block index into the btree block's hash entry array. As a result, it was comparing the wrong hashes, and so could misorder the entries in the btree. For most cases, this doesn't cause any problems as it requires hash collisions to expose the ordering problem. However, when there are hash collisions within a directory there is a very good probability that the entries will be ordered incorrectly and that actually matters when duplicate hashes are placed into or removed from the btree block hash entry array. This bug results in an on-disk directory corruption and that results in directory verifier functions throwing corruption warnings into the logs. While no data or directory entries are lost, access to them may be compromised, and attempts to remove entries from a directory that has suffered from this corruption may result in a filesystem shutdown. xfs_repair will fix the directory hash ordering without data loss occuring. [dchinner: wrote useful a commit message] Reported-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Mark Tinguely <tinguely@sgi.com> Reviewed-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Claudio Takahasi authored
commit 5981a882 upstream. This patch fixes authentication failure on LE link re-connection when BlueZ acts as slave (peripheral). LTK is removed from the internal list after its first use causing PIN or Key missing reply when re-connecting the link. The LE Long Term Key Request event indicates that the master is attempting to encrypt or re-encrypt the link. Pre-condition: BlueZ host paired and running as slave. How to reproduce(master): 1) Establish an ACL LE encrypted link 2) Disconnect the link 3) Try to re-establish the ACL LE encrypted link (fails) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18 Handle: 64 Long term key: 2aa531db2fce9f00a0569c7d23d17409 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Reply (0x08|0x001a) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 64 Encryption: Enabled with AES-CCM (0x01) ... @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 3 < HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1 Advertising: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertise Enable (0x08|0x000a) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 64 Role: Slave (0x01) ... @ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000 > HCI Event: LE Meta Event (0x3e) plen 13 LE Long Term Key Request (0x05) Handle: 64 Random number: 875be18439d9aa37 Encryption diversifier: 0x76ed < HCI Command: LE Long Term Key Request Neg Reply (0x08|0x001b) plen 2 Handle: 64 > HCI Event: Command Complete (0x0e) plen 6 LE Long Term Key Request Neg Reply (0x08|0x001b) ncmd 1 Status: Success (0x00) Handle: 64 > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 64 Reason: Authentication Failure (0x05) @ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 0 Signed-off-by:
Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Oleg Nesterov authored
commit d2308225 upstream. pidns_get()->get_pid_ns() can hit ns == NULL. This task_struct can't go away, but task_active_pid_ns(task) is NULL if release_task(task) was already called. Alternatively we could change get_pid_ns(ns) to check ns != NULL, but it seems that other callers are fine. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman ebiederm@xmission.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Hurley authored
commit a9c3f68f upstream. The user-settable knob, low_latency, has been the source of several BUG reports which stem from flush_to_ldisc() running in interrupt context. Since 3.12, which added several sleeping locks (termios_rwsem and buf->lock) to the input processing path, the frequency of these BUG reports has increased. Note that changes in 3.12 did not introduce this regression; sleeping locks were first added to the input processing path with the removal of the BKL from N_TTY in commit a88a69c9, 'n_tty: Fix loss of echoed characters and remove bkl from n_tty' and later in commit 38db8979, 'tty: throttling race fix'. Since those changes, executing flush_to_ldisc() in interrupt_context (ie, low_latency set), is unsafe. However, since most devices do not validate if the low_latency setting is appropriate for the context (process or interrupt) in which they receive data, some reports are due to misconfiguration. Further, serial dma devices for which dma fails, resort to interrupt receiving as a backup without resetting low_latency. Historically, low_latency was used to force wake-up the reading process rather than wait for the next scheduler tick. The effect was to trim multiple milliseconds of latency from when the process would receive new data. Recent tests [1] have shown that the reading process now receives data with only 10's of microseconds latency without low_latency set. Remove the low_latency rx steering from tty_flip_buffer_push(); however, leave the knob as an optional hint to drivers that can tune their rx fifos and such like. Cleanup stale code comments regarding low_latency. [1] https://lkml.org/lkml/2014/2/20/434 "Yay.. thats an annoying historical pain in the butt gone." -- Alan Cox Reported-by:
Beat Bolli <bbolli@ewanet.ch> Reported-by:
Pavel Roskin <proski@gnu.org> Acked-by:
David Sterba <dsterba@suse.cz> Cc: Grant Edwards <grant.b.edwards@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Hal Murray <murray+fedora@ip-64-139-1-69.sjc.megapath.net> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Hannes Reinecke authored
commit 723abd87 upstream. The 'active' sysfs attribute should refer to the currently active tty devices the console is running on, not the currently active console. The console structure doesn't refer to any device in sysfs, only the tty the console is running on has. So we need to print out the tty names in 'active', not the console names. There is one special-case, which is tty0. If the console is directed to it, we want 'tty0' to show up in the file, so user-space knows that the messages get forwarded to the active VT. The ->device() callback would resolve tty0, though. Hence, treat it special and don't call into the VT layer to resolve it (plymouth is known to depend on it). Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Werner Fink <werner@suse.de> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Ian Abbott authored
commit 268d1e79 upstream. According to National Instruments' PCI-DIO-96/PXI-6508/PCI-6503 User Manual, the physical address in PCI BAR1 needs to be OR'ed with 0x80 and written to register offset 0xC0 in the "MITE" registers (BAR0). Do so during initialization of the National Instruments boards handled by the "8255_pci" driver. The boards were previously handled by the "ni_pcidio" driver, where the initialization was done by `mite_setup()` in the "mite" module. The "mite" module comes with too much extra baggage for the "8255_pci" driver to deal with so use a local, simpler initialization function. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Lan Tianyu authored
commit 0bf6368e upstream. Commit 1696d9dc (ACPI: Remove the old /proc/acpi/event interface) removed ACPI Button event which originally was sent to userspace via /proc/acpi/event. This caused ACPI shutdown regression on gentoo in VirtualBox. Now ACPI events are sent to userspace via netlink, so add ACPI Button event back via netlink routine. References: https://bugzilla.kernel.org/show_bug.cgi?id=71721Reported-and-tested-by:
Richard Musil <richard.musil@gmail.com> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mohit Kumar authored
commit 017fcdc3 upstream. This patch corrects iATU programming for cfg1, io and mem viewport. Enable ATU only after configuring it. Signed-off-by:
Mohit Kumar <mohit.kumar@st.com> Signed-off-by:
Ajay Khandelwal <ajay.khandelwal@st.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Mohit Kumar authored
commit dbffdd68 upstream. The Synopsys PCIe core provides one pair of 32-bit BARs (BAR 0 and BAR 1). The BARs can be configured as follows: - One 64-bit BAR: BARs 0 and 1 are combined to form a single 64-bit BAR - Two 32-bit BARs: BARs 0 and 1 are two independent 32-bit BARs This patch corrects 64-bit, non-prefetchable memory BAR configuration implemented in dw driver. Signed-off-by:
-
Neil Horman authored
commit 6f8a1b33 upstream. Commit 03bbcb2e (iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets) properly disables irq remapping on the 5500/5520 chipsets that don't correctly perform that feature. However, when I wrote it, I followed the errata sheet linked in that commit too closely, and explicitly tied the activation of the quirk to revision 0x13 of the chip, under the assumption that earlier revisions were not in the field. Recently a system was reported to be suffering from this remap bug and the quirk hadn't triggered, because the revision id register read at a lower value that 0x13, so the quirk test failed improperly. Given this, it seems only prudent to adjust this quirk so that any revision less than 0x13 has the quirk asserted. [ tglx: Removed the 0x12 comparison of pci id 3405 as this is covered by the <= 0x13 check already ] Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1394649873-14913-1-git-send-email-nhorman@tuxdriver.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Mikulas Patocka authored
commit e79323bd upstream. smp_read_barrier_depends() can be used if there is data dependency between the readers - i.e. if the read operation after the barrier uses address that was obtained from the read operation before the barrier. In this file, there is only control dependency, no data dependecy, so the use of smp_read_barrier_depends() is incorrect. The code could fail in the following way: * the cpu predicts that idx < entries is true and starts executing the body of the for loop * the cpu fetches map->extent[0].first and map->extent[0].count * the cpu fetches map->nr_extents * the cpu verifies that idx < extents is true, so it commits the instructions in the body of the for loop The problem is that in this scenario, the cpu read map->extent[0].first and map->nr_extents in the wrong order. We need a full read memory barrier to prevent it. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Oliver Neukum authored
commit 5c551e62 upstream. Some BIOSes change hardware based on the state of a laptop's lid. If the lid is closed, the touchpad is disabled and the checksum changes. Windows 8 no longer aborts resume if the checksum has changed. Signed-off-by:
Oliver Neukum <oneukum@suse.de> [rjw: Use pr_crit() for the message and don't break the string] Signed-off-by:
-
LEROY Christophe authored
commit ae2163be upstream. Commit beb2dc0a breaks the MPC8xx which seems to not support using mfspr SPRN_TBRx instead of mftb/mftbu despite what is written in the reference manual. This patch reverts to the use of mftb/mftbu when CONFIG_8xx is selected. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Helge Deller authored
commit ab3e55b1 upstream. This bug was detected with the libio-epoll-perl debian package where the test case IO-Ppoll-compat.t failed. Signed-off-by:
Helge Deller <deller@gmx.de> CC: stable@kernel.org # 3.0+ Signed-off-by:
-
Wang, Xiaoming authored
commit b04c4619 upstream. Plug a group_info refcount leak in ping_init. group_info is only needed during initialization and the code failed to release the reference on exit. While here move grabbing the reference to a place where it is actually needed. Signed-off-by:
Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by:
Zhang Dongxing <dongxing.zhang@intel.com> Signed-off-by:
xiaoming wang <xiaoming.wang@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Paolo Bonzini authored
commit 5678de3f upstream. QE reported that they got the BUG_ON in ioapic_service to trigger. I cannot reproduce it, but there are two reasons why this could happen. The less likely but also easiest one, is when kvm_irq_delivery_to_apic does not deliver to any APIC and returns -1. Because irqe.shorthand == 0, the kvm_for_each_vcpu loop in that function is never reached. However, you can target the similar loop in kvm_irq_delivery_to_apic_fast; just program a zero logical destination address into the IOAPIC, or an out-of-range physical destination address. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Bodo Stroesser authored
commit 48e8ac29 upstream. With recent changes it is possible for the timer handler to detect an idle interface and not start the timer, but the thread to start an operation at the same time. The thread will not start the timer in that instance, resulting in the timer not running. Instead, move all timer operations under the lock and start the timer in the thread if it detect non-idle and the timer is not already running. Moving under locks allows the last timeout to be set in both the thread and the timer. 'Timer is not running' means that the timer is not pending and smi_timeout() is not running. So we need a flag to detect this correctly. Also fix a few other timeout bugs: setting the last timeout when the interrupt has to be disabled and the timer started, and setting the last timeout in check_start_timer_thread possibly racing with the timer Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
-
Rusty Russell authored
commit 1f74ef0f upstream. When adding or removing 100G from a balloon: BUG: soft lockup - CPU#0 stuck for 22s! [vballoon:367] We have a wait_event_interruptible(), but the condition is always true (more ballooning to do) so we don't ever sleep. We also have a wait_event() for the host to ack, but that is also always true as QEMU is synchronous for balloon operations. Reported-by:
Gopesh Kumar Chaudhary <gopchaud@in.ibm.com> Cc: stable@kernel.org Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Jan Kara authored
commit 5acda9d1 upstream. After commit 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue") when device is removed while we are writing to it we crash in bdi_writeback_workfn() -> set_worker_desc() because bdi->dev is NULL. This can happen because even though bdi_unregister() cancels all pending flushing work, nothing really prevents new ones from being queued from balance_dirty_pages() or other places. Fix the problem by clearing BDI_registered bit in bdi_unregister() and checking it before scheduling of any flushing work. Fixes: 839a8e86Reviewed-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Derek Basehore <dbasehore@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Derek Basehore authored
commit 6ca738d6 upstream. bdi_wakeup_thread_delayed() used the mod_delayed_work() function to schedule work to writeback dirty inodes. The problem with this is that it can delay work that is scheduled for immediate execution, such as the work from sync_inodes_sb(). This can happen since mod_delayed_work() can now steal work from a work_queue. This fixes the problem by using queue_delayed_work() instead. This is a regression caused by commit 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue"). The reason that this causes a problem is that laptop-mode will change the delay, dirty_writeback_centisecs, to 60000 (10 minutes) by default. In the case that bdi_wakeup_thread_delayed() races with sync_inodes_sb(), sync will be stopped for 10 minutes and trigger a hung task. Even if dirty_writeback_centisecs is not long enough to cause a hung task, we still don't want to delay sync for that long. We fix the problem by using queue_delayed_work() when we want to schedule writeback sometime in future. This function doesn't change the timer if it is already armed. For the same reason, we also change bdi_writeback_workfn() to immediately queue the work again in the case that the work_list is not empty. The same problem can happen if the sync work is run on the rescue worker. [jack@suse.cz: update changelog, add comment, use bdi_wakeup_thread_delayed()] Signed-off-by:
Derek Basehore <dbasehore@chromium.org> Reviewed-by:
-
Aravind Gopalakrishnan authored
commit 9d0e8d83 upstream. Update current channel selection logic to include F15h, M30h memory controllers. Refer F15 M30h BKDG D18F2x110[7:6] (DRAM Controller Select Low) (Link:http://support.amd.com/TechDocs/49125_15h_Models_30h-3Fh_BKDG.pdf) Signed-off-by:
Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/1390338216-3873-1-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Aravind Gopalakrishnan authored
commit fb53a1ab upstream. The workaround for this Erratum is included in AGESA. But BIOSes spun only after Jan2014 will have the fix (atleast server versions of the chip). The erratum affects both embedded and server platforms and since we cannot say with certainity that ALL BIOSes on systems out in the field will have the fix, we should probably insulate ourselves in case BIOS does not do the right thing or someone is using old BIOSes. Refer to Revision Guide for AMD F16h models 00h-0fh, document 51810 Rev. 3.04, November2013 for details on the Erratum. Tested the patch on Fam16h server platform and it works fine. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Sergey Dyasly authored
commit 3159f372 upstream. With LPAE enabled, physical address space is larger than 4GB. Allow mapping any part of it via /dev/mem by using PHYS_MASK to determine valid range. PHYS_MASK covers 40 bits with LPAE enabled and 32 bits otherwise. Reported-by:
Vassili Karpov <av1474@comtv.ru> Signed-off-by:
Sergey Dyasly <dserrg@gmail.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Kieran Clancy authored
commit 3eba563e upstream. Address a regression caused by commit ad332c8a: (ACPI / EC: Clear stale EC events on Samsung systems) After the earlier patch, there was found to be a race condition on some earlier Samsung systems (N150/N210/N220). The function acpi_ec_clear was sometimes discarding a new EC event before its GPE was triggered by the system. In the case of these systems, this meant that the "lid open" event was not registered on resume if that was the cause of the wake, leading to problems when attempting to close the lid to suspend again. After testing on a number of Samsung systems, both those affected by the previous EC bug and those affected by the race condition, it seemed that the best course of action was to process rather than discard the events. On Samsung systems which accumulate stale EC events, there does not seem to be any adverse side-effects of running the associated _Q methods. This patch adds an argument to the static function acpi_ec_sync_query so that it may be used within the acpi_ec_clear loop in place of acpi_ec_query_unlocked which was used previously. With thanks to Stefan Biereigel for reporting the issue, and for all the people who helped test the new patch on affected systems. Fixes: ad332c8a (ACPI / EC: Clear stale EC events on Samsung systems) References: https://lkml.kernel.org/r/532FE3B2.9060808@biereigel-wb.de References: https://bugzilla.kernel.org/show_bug.cgi?id=44161#c173Reported-by:
Stefan Biereigel <stefan@biereigel.de> Signed-off-by:
Kieran Clancy <clancy.kieran@gmail.com> Tested-by:
Dennis Jansen <dennis.jansen@web.de> Tested-by:
Nicolas Porcel <nicolasporcel06@gmail.com> Tested-by:
Maurizio D'Addona <mauritiusdadd@gmail.com> Tested-by:
Juan Manuel Cabo <juanmanuel.cabo@gmail.com> Tested-by:
Giannis Koutsou <giannis.koutsou@gmail.com> Tested-by:
-
David Ertman authored
commit b20a7744 upstream. In commit da1e2046, the flow for enabling/disabling an Si errata workaround (e1000_lv_jumbo_workaround_ich8lan) was changed to fix a problem with iAMT connections dropping on interface down with jumbo frames set. Part of this change was to move the function call disabling the workaround to e1000e_down() from the e1000_setup_rctl() function. The mechanic for disabling of this workaround involves writing several MAC and PHY registers back to hardware defaults. After this commit, when the driver is loaded with the cable out, the PHY registers are not programmed with the correct default values. This causes the device to be capable of transmitting packets, but is unable to recieve them until this workaround is called. The flow of e1000e's open code relies upon calling the above workaround to expicitly program these registers either with jumbo frame appropriate settings or h/w defaults on 82579 and newer hardware. Fix this issue by adding logic to e1000_setup_rctl() that not only calls e1000_lv_jumbo_workaround_ich8lan() when jumbo frames are set, to enable the workaround, but also calls this function to explicitly disable the workaround in the case that jumbo frames are not set. Signed-off-by:
Dave Ertman <davidx.m.ertman@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Chew, Kean ho authored
commit 1b31e9b7 upstream. Add Device ID of Intel BayTrail SMBus Controller. Signed-off-by:
Chew, Kean ho <kean.ho.chew@intel.com> Signed-off-by:
Chew, Chiau Ee <chiau.ee.chew@intel.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Al Viro authored
commit f6500801 upstream. * we need to save the starting point for restarts * reject pathologically short buffers outright Spotted-by:
Denys Vlasenko <dvlasenk@redhat.com> Spotted-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Mikulas Patocka authored
We need to restore all variables including error (as it is done in the upstream kernel). The variable error was errorneously not restored when backporting the patch ede4cebc (prepend_path() needs to reinitialize dentry/vfsmount/mnt on restarts). This should be applied only to the 3.12 series. Signed-off-by:
-
Joe Perches authored
commit 29fc2bc7 upstream. pr_debug_ratelimited should be coded similarly to dev_dbg_ratelimited to reduce the "callbacks suppressed" messages. Add #include <linux/dynamic_debug.h> to printk.h. Unfortunately, this new #include must be after the prototype/declaration of function printk. It may be better to split out these _ratelimited declarations into a separate file one day. Any use of these pr_<foo>_ratelimited functions must also have another specific #include <ratelimited.h>. Most users have this done indirectly via #include <linux/kernel.h> printk.h may not #include <linux/ratelimit.h> as it causes circular dependencies and compilation failures. Signed-off-by:
Joe Perches <joe@perches.com> Tested-by:
Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Joe Perches authored
commit 32e24930 upstream. Fix atm_dbg to use normal pr_debug not dynamic_pr_debug because dynamic_pr_debug may not be compiled in at all. Signed-off-by:
-
- 25 Apr, 2014 6 commits
-
-
Jay Cornwall authored
commit e8d2d82d upstream. This patch corrects the PASID format in the INVALIDATE_IOTLB_PAGES command, which was caused by incorrect information in the AMD IOMMU Architectural Specification v2.01 document. Incorrect format: cmd->data[0][16:23] = PASID[7:0] cmd->data[1][16:27] = PASID[19:8] Correct format: cmd->data[0][16:23] = PASID[15:8] cmd->data[1][16:23] = PASID[7:0] However, this does not affect the IOMMUv2 hardware implementation, and has been corrected since version 2.02 of the specification (available through AMD NDA). Signed-off-by:
Jay Cornwall <jay.cornwall@amd.com> Reviewed-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Tedd Ho-Jeong An authored
commit ef4e5e4a upstream. This patch adds support for new Intel Bluetooth device. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0a2a Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Ingo Molnar authored
commit c321f7d7 upstream. Otherwise the device is not completely shut down. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Petr Tesarik authored
commit 08d2d00b upstream. The loff_t type may be wider than phys_addr_t (e.g. on 32-bit systems). Consequently, the file offset may be truncated in the assignment. Currently, /dev/mem wraps around, which may cause applications to read or write incorrect regions of memory by accident. Let's follow POSIX file semantics here and return 0 when reading from and -EFBIG when writing to an offset that cannot be represented by a phys_addr_t. Note that the conditional is optimized out by the compiler if loff_t has the same size as phys_addr_t. Signed-off-by:
Petr Tesarik <ptesarik@suse.cz> Signed-off-by:
-
Emil Goode authored
commit 8fc1e8c2 upstream. When brcm80211 firmware is not installed networking hangs. A deadlock happens because we call ieee80211_unregister_hw() from the .start callback of struct ieee80211_ops. When .start is called we are under rtnl lock and ieee80211_unregister_hw() tries to take it again. Function call stack: dev_change_flags() __dev_change_flags() __dev_open() ASSERT_RTNL() <-- Assert rtnl lock ops->ndo_open() .ndo_open = ieee80211_open, ieee80211_open() ieee80211_do_open() drv_start() local->ops->start() .start = brcms_ops_start, brcms_ops_start() brcms_remove() ieee80211_unregister_hw() rtnl_lock() <-- Here we deadlock Introduced by: commit 25b5632f ("brcmsmac: request firmware in .start() callback") This patch fixes the bug by removing the call to brcms_remove() and moves the brcms_request_fw() call to the top of the .start callback to not initiate anything unless firmware is installed. Signed-off-by:
Emil Goode <emilgoode@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Alexei Starovoitov authored
commit b07c2651 upstream. The combination of two commits: commit 8e4e1713 ("openvswitch: Simplify datapath locking.") commit 2537b4dd ("openvswitch:: link upper device for port devices") introduced a bug where upper_dev wasn't unlinked upon netdev_unregister notification The following steps: modprobe openvswitch ovs-dpctl add-dp test ip tuntap add dev tap1 mode tap ovs-dpctl add-if test tap1 ip tuntap del dev tap1 mode tap are causing multiple warnings: [ 62.747557] gre: GRE over IPv4 demultiplexor driver [ 62.749579] openvswitch: Open vSwitch switching datapath [ 62.755087] device test entered promiscuous mode [ 62.765911] device tap1 entered promiscuous mode [ 62.766033] IPv6: ADDRCONF(NETDEV_UP): tap1: link is not ready [ 62.769017] ------------[ cut here ]------------ [ 62.769022] WARNING: CPU: 1 PID: 3267 at net/core/dev.c:5501 rollback_registered_many+0x20f/0x240() [ 62.769023] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video [ 62.769051] CPU: 1 PID: 3267 Comm: ip Not tainted 3.12.0-rc3+ #60 [ 62.769052] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 62.769053] 0000000000000009 ffff8807f25cbd28 ffffffff8175e575 0000000000000006 [ 62.769055] 0000000000000000 ffff8807f25cbd68 ffffffff8105314c ffff8807f25cbd58 [ 62.769057] ffff8807f2634000 ffff8807f25cbdc8 ffff8807f25cbd88 ffff8807f25cbdc8 [ 62.769059] Call Trace: [ 62.769062] [<ffffffff8175e575>] dump_stack+0x55/0x76 [ 62.769065] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0 [ 62.769067] [<ffffffff8105319a>] warn_slowpath_null+0x1a/0x20 [ 62.769069] [<ffffffff8162a04f>] rollback_registered_many+0x20f/0x240 [ 62.769071] [<ffffffff8162a101>] rollback_registered+0x31/0x40 [ 62.769073] [<ffffffff8162a488>] unregister_netdevice_queue+0x58/0x90 [ 62.769075] [<ffffffff8154f900>] __tun_detach+0x140/0x340 [ 62.769077] [<ffffffff8154fb36>] tun_chr_close+0x36/0x60 [ 62.769080] [<ffffffff811bddaf>] __fput+0xff/0x260 [ 62.769082] [<ffffffff811bdf5e>] ____fput+0xe/0x10 [ 62.769084] [<ffffffff8107b515>] task_work_run+0xb5/0xe0 [ 62.769087] [<ffffffff810029b9>] do_notify_resume+0x59/0x80 [ 62.769089] [<ffffffff813a41fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 62.769091] [<ffffffff81770f5a>] int_signal+0x12/0x17 [ 62.769093] ---[ end trace 838756c62e156ffb ]--- [ 62.769481] ------------[ cut here ]------------ [ 62.769485] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0() [ 62.769486] sysfs: can not remove 'master', no directory [ 62.769486] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video [ 62.769514] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G W 3.12.0-rc3+ #60 [ 62.769515] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 62.769518] Workqueue: events ovs_dp_notify_wq [openvswitch] [ 62.769519] 0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006 [ 62.769521] ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b28 [ 62.769523] 0000000000000000 ffffffff81a87a1f ffff8807f2634000 ffff880037038500 [ 62.769525] Call Trace: [ 62.769528] [<ffffffff8175e575>] dump_stack+0x55/0x76 [ 62.769529] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0 [ 62.769531] [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50 [ 62.769533] [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0 [ 62.769535] [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30 [ 62.769538] [<ffffffff81631ef7>] __netdev_adjacent_dev_remove+0xf7/0x150 [ 62.769540] [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50 [ 62.769542] [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50 [ 62.769544] [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140 [ 62.769548] [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch] [ 62.769550] [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch] [ 62.769552] [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch] [ 62.769555] [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch] [ 62.769557] [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0 [ 62.769559] [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0 [ 62.769562] [<ffffffff8107659b>] worker_thread+0x11b/0x370 [ 62.769564] [<ffffffff81076480>] ? rescuer_thread+0x350/0x350 [ 62.769566] [<ffffffff8107f44a>] kthread+0xea/0xf0 [ 62.769568] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769570] [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0 [ 62.769572] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769573] ---[ end trace 838756c62e156ffc ]--- [ 62.769574] ------------[ cut here ]------------ [ 62.769576] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0() [ 62.769577] sysfs: can not remove 'upper_test', no directory [ 62.769577] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video [ 62.769603] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G W 3.12.0-rc3+ #60 [ 62.769604] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 62.769606] Workqueue: events ovs_dp_notify_wq [openvswitch] [ 62.769607] 0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006 [ 62.769609] ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b58 [ 62.769611] 0000000000000000 ffff880807ad3bd9 ffff8807f2634000 ffff880037038500 [ 62.769613] Call Trace: [ 62.769615] [<ffffffff8175e575>] dump_stack+0x55/0x76 [ 62.769617] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0 [ 62.769619] [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50 [ 62.769621] [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0 [ 62.769622] [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30 [ 62.769624] [<ffffffff81631f22>] __netdev_adjacent_dev_remove+0x122/0x150 [ 62.769627] [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50 [ 62.769629] [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50 [ 62.769631] [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140 [ 62.769633] [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch] [ 62.769636] [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch] [ 62.769638] [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch] [ 62.769640] [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch] [ 62.769642] [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0 [ 62.769644] [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0 [ 62.769646] [<ffffffff8107659b>] worker_thread+0x11b/0x370 [ 62.769648] [<ffffffff81076480>] ? rescuer_thread+0x350/0x350 [ 62.769650] [<ffffffff8107f44a>] kthread+0xea/0xf0 [ 62.769652] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769654] [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0 [ 62.769656] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150 [ 62.769657] ---[ end trace 838756c62e156ffd ]--- [ 62.769724] device tap1 left promiscuous mode This patch also affects moving devices between net namespaces. OVS used to ignore netns move notifications which caused problems. Like: ovs-dpctl add-if test tap1 ip link set tap1 netns 3512 and then removing tap1 inside the namespace will cause hang on missing dev_put. With this patch OVS will detach dev upon receiving netns move event. Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
Jesse Gross <jesse@nicira.com> Signed-off-by:
-
