1. 22 Sep, 2016 40 commits
    • Sean Wang's avatar
      net: ethernet: mediatek: use phydev from struct net_device · 2364c5c5
      Sean Wang authored
      reuse phydev already in struct net_device instead of creating
      another new one in private structure.
      Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2364c5c5
    • David S. Miller's avatar
      Merge branch 'mediatek-trgmii' · 4fa01af4
      David S. Miller authored
      Sean Wang says:
      
      ====================
      mediatek: add support for RGMII on GMAC0 through TRGMII hardware module
      
      By default, GMAC0 is connected to built-in switch called
      MT7530 through the proprietary interface called Turbo RGMII
      (TRGMII). TRGMII also supports well for RGMII as generic external
      PHY uses but requires some slight changes to the setup of TRGMII
      and doesn't have well support on current driver.
      
      So this patchset
      1) provides the slight changes of the setup for RGMII can work
         through TRGMII
      2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII
         about phy-mode on device tree to make GMAC0 distinguish which
         mode it runs
      3) changes dynamically source clock, TX/RX delay and interface
         mode on TRGMII for adapting various link
      
      Changes since v1:
      - fixed the style of comment which doesn't have a space at
         the beginning and end of comment lines
      - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII
         into linux/phy.h
      - enhance the Documentation about device tree binding for trgmii
        which is applicable only for GMAC0 which uses fixed-link
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4fa01af4
    • Sean Wang's avatar
      net: ethernet: mediatek: add the dts property to set if TRGMII supported on GMAC0 · b8853965
      Sean Wang authored
      Add the dts property for the capability if TRGMII supported on GAMC0
      Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b8853965
    • Sean Wang's avatar
      net: ethernet: mediatek: add support for GMAC0 connecting with external PHY through TRGMII · f430dea7
      Sean Wang authored
      Changing dynamically source clock, TX/RX delay and interface mode
      used by TRGMII hardware module inside PHY capability polling routine
      for adapting to the various speed of RGMII used by external PHY for
      GMAC0.
      Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f430dea7
    • Sean Wang's avatar
      net: ethernet: mediatek: add extension of phy-mode for TRGMII · 572de608
      Sean Wang authored
      adds PHY-mode "trgmii" as an extension for the operation
      mode of the PHY interface for PHY_INTERFACE_MODE_TRGMII.
      and adds a variable trgmii inside mtk_mac as the indication
      to make the difference between the MAC connected to internal
      switch or connected to external PHY by the given configuration
      on the board and then to perform the corresponding setup on
      TRGMII hardware module.
      Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      572de608
    • David S. Miller's avatar
      Merge tag 'rxrpc-rewrite-20160922-v2' of... · 60cd6e63
      David S. Miller authored
      Merge tag 'rxrpc-rewrite-20160922-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
      
      David Howells says:
      
      ====================
      rxrpc: Preparation for slow-start algorithm [ver #2]
      
      Here are some patches that prepare for improvements in ACK generation and
      for the implementation of the slow-start part of the protocol:
      
       (1) Stop storing the protocol header in the Tx socket buffers, but rather
           generate it on the fly.  This potentially saves a little space and
           makes it easier to alter the header just before transmission (the
           flags may get altered and the serial number has to be changed).
      
       (2) Mask off the Tx buffer annotations and add a flag to record which ones
           have already been resent.
      
       (3) Track RTT on a per-peer basis for use in future changes.  Tracepoints
           are added to log this.
      
       (4) Send PING ACKs in response to incoming calls to elicit a PING-RESPONSE
           ACK from which RTT data can be calculated.  The response also carries
           other useful information.
      
       (5) Expedite PING-RESPONSE ACK generation from sendmsg.  If we're actively
           using sendmsg, this allows us, under some circumstances, to avoid
           having to rely on the background work item to run to generate this
           ACK.
      
           This requires ktime_sub_ms() to be added.
      
       (6) Set the REQUEST-ACK flag on some DATA packets to elicit ACK-REQUESTED
           ACKs from which RTT data can be calculated.
      
       (7) Limit the use of pings and ACK requests for RTT determination.
      
      Changes:
      
       (V2) Don't use the C division operator for 64-bit division.  One instance
            should use do_div() and the other should be using nsecs_to_jiffies().
      
            The last two patches got transposed, leading to an undefined symbol
            in one of them.
      Reported-by: default avatarkbuild test robot <lkp@intel.com>
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      60cd6e63
    • David Howells's avatar
      rxrpc: Reduce the number of PING ACKs sent · fc943f67
      David Howells authored
      We don't want to send a PING ACK for every new incoming call as that just
      adds to the network traffic.  Instead, we send a PING ACK to the first
      three that we receive and then once per second thereafter.
      
      This could probably be made adjustable in future.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      fc943f67
    • David Howells's avatar
      rxrpc: Reduce the number of ACK-Requests sent · 0d4b103c
      David Howells authored
      Reduce the number of ACK-Requests we set on DATA packets that we're sending
      to reduce network traffic.  We set the flag on odd-numbered DATA packets to
      start off the RTT cache until we have at least three entries in it and then
      probe once per second thereafter to keep it topped up.
      
      This could be made tunable in future.
      
      Note that from this point, the RXRPC_REQUEST_ACK flag is set on DATA
      packets as we transmit them and not stored statically in the sk_buff.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      0d4b103c
    • David S. Miller's avatar
      Merge branch 'ftgmac100-ast2500-support' · cdd0766d
      David S. Miller authored
      Joel Stanley says:
      
      ====================
      ftgmac100 support for ast2500
      
      This series adds support to the ftgmac100 driver for the Aspeed ast2400 and
      ast2500 SoCs. In particular, they ensure the driver works correctly on the
      ast2500 where the MAC block has seen some changes in register layout.
      
      They have been tested on ast2400 and ast2500 systems with the NCSI stack and
      with a directly attached PHY.
      
      V2 reworks the two patches relating to PHYSTS_CHG into the one patch that
      disables the interrupt instead of playing with interrupt sensitivity. I kept
      patch 4 'net/faraday: Clear stale interrupts' which was first introduced to
      clear the stale PHYSTS_CHG interrupt, as it helps keep us safe from unhygienic
      (vendor) bootloaders.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cdd0766d
    • Joel Stanley's avatar
      net/faraday: Mask out PHYSTS_CHG interrupt · edcd692f
      Joel Stanley authored
      The PHYSTS_CHG (the ftgmac100's PHY IRQ) is telling the system to go
      look at the PHY registers for a link status change.
      
      The interrupt was causing issues on Aspeed SoC where some board designs
      had an active high configuration, some active low, and in some cases
      repurposed for other functions. When misconfigured Linux would chew 100%
      of CPU cycles servicing interrupts:
      
       [   20.280000] ftgmac100 1e660000.ethernet eth0: [ISR] = 0x200: PHYSTS_CHG
       [   20.280000] ftgmac100 1e660000.ethernet eth0: [ISR] = 0x200: PHYSTS_CHG
       [   20.280000] ftgmac100 1e660000.ethernet eth0: [ISR] = 0x200: PHYSTS_CHG
       [   20.300000] ftgmac100 1e660000.ethernet eth0: [ISR] = 0x200: PHYSTS_CHG
      
      While in the ftgmac100 IP can be configured for high, low and edge
      sensitivity the current driver always polls the PHY, so we chose to mask
      out the interrupt.
      
      See https://patchwork.ozlabs.org/patch/672099/ for more discussion.
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      edcd692f
    • Joel Stanley's avatar
      net/faraday: Configure old MDIO interface on Aspeed SoCs · e07dc63b
      Joel Stanley authored
      The Aspeed SoCs have a new MDIO interface as an option in the G4 and G5
      SoCs. The old one is still available, so select it in order to remain
      compatible with the ftgmac100 driver.
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e07dc63b
    • Gavin Shan's avatar
      net/faraday: Clear stale interrupts · 08c9c126
      Gavin Shan authored
      There is stale interrupt (PHYSTS_CHG in ISR, bit#6 in 0x0) from
      the bootloader (uboot) when enabling the MAC. The stale interrupts
      aren't part of kernel and should be cleared.
      
      This clears the stale interrupts in ISR (0x0) when enabling the MAC.
      Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      08c9c126
    • Joel Stanley's avatar
      net/faraday: Adapt for Aspeed SoCs · 2a0ab8eb
      Joel Stanley authored
      The RXDES and TXDES registers bits in the ftgmac100 indicates EDO{R,T}R
      at bit position 15 for the Faraday Tech IP. However, the version of this
      IP present in the Aspeed SoCs has these bits at position 30 in the
      registers.
      
      It appers that ast2400 SoCs support both positions, with the 15th bit
      marked as reserved but still functional. In the ast2500 this bit is
      reused for another function, so we need a work around.
      
      This was confirmed with engineers from Aspeed that using bit 30 is
      correct for both the ast2400 and ast2500 SoCs.
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2a0ab8eb
    • Andrew Jeffery's avatar
      net/faraday: Make EDO{R,T}R bits configurable · 7906a4da
      Andrew Jeffery authored
      These bits are #defined at a fixed location. In order to support future
      hardware that has chosen to move these bits around move the bits into a
      member of the struct ftgmac100.
      Signed-off-by: default avatarAndrew Jeffery <andrew@aj.id.au>
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7906a4da
    • Andrew Jeffery's avatar
      net/faraday: Separate rx page storage from rxdesc · ada66b54
      Andrew Jeffery authored
      The ftgmac100 hardware revision in e.g. the Aspeed AST2500 no longer
      reserves all bits in RXDES#2 but instead uses the bottom 16 bits to
      store MAC frame metadata. Avoid corruption by shifting struct page
      pointers out to their own member in struct ftgmac100.
      Signed-off-by: default avatarAndrew Jeffery <andrew@aj.id.au>
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ada66b54
    • David Howells's avatar
      rxrpc: Obtain RTT data by requesting ACKs on DATA packets · 50235c4b
      David Howells authored
      In addition to sending a PING ACK to gain RTT data, we can set the
      RXRPC_REQUEST_ACK flag on a DATA packet and get a REQUESTED-ACK ACK.  The
      ACK packet contains the serial number of the packet it is in response to,
      so we can look through the Tx buffer for a matching DATA packet.
      
      This requires that the data packets be stamped with the time of
      transmission as a ktime rather than having the resend_at time in jiffies.
      
      This further requires the resend code to do the resend determination in
      ktimes and convert to jiffies to set the timer.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      50235c4b
    • David Howells's avatar
      rxrpc: Add ktime_sub_ms() · 77f2efcb
      David Howells authored
      Add a ktime_sub_ms() to go with ktime_add_ms() and co. for use in AF_RXRPC
      RTT determination.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      77f2efcb
    • David Howells's avatar
      rxrpc: Expedite ping response transmission · 7aa51da7
      David Howells authored
      Expedite the transmission of a response to a PING ACK by sending it from
      sendmsg if one is pending.  We're most likely to see a PING ACK during the
      client call Tx phase as the other side may use it to determine a number of
      parameters, such as the client's receive window size, the RTT and whether
      the client is doing slow start (similar to RFC5681).
      
      If we don't expedite it, it's left to the background processing thread to
      transmit.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      7aa51da7
    • David Howells's avatar
      rxrpc: Send pings to get RTT data · 8e83134d
      David Howells authored
      Send a PING ACK packet to the peer when we get a new incoming call from a
      peer we don't have a record for.  The PING RESPONSE ACK packet will tell us
      the following about the peer:
      
       (1) its receive window size
      
       (2) its MTU sizes
      
       (3) its support for jumbo DATA packets
      
       (4) if it supports slow start (similar to RFC 5681)
      
       (5) an estimate of the RTT
      
      This is necessary because the peer won't normally send us an ACK until it
      gets to the Rx phase and we send it a packet, but we would like to know
      some of this information before we start sending packets.
      
      A pair of tracepoints are added so that RTT determination can be observed.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      8e83134d
    • Wei Yongjun's avatar
      cxgb4: Convert to use simple_open() · 524605e5
      Wei Yongjun authored
      Remove an open coded simple_open() function and replace file
      operations references to the function with simple_open()
      instead.
      
      Generated by: scripts/coccinelle/api/simple_open.cocci
      Signed-off-by: default avatarWei Yongjun <weiyongjun1@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      524605e5
    • Wei Yongjun's avatar
      net: dsa: qca8k: use mdio_module_driver to simplify the code · a084ab33
      Wei Yongjun authored
      mdio_module_driver() makes the code simpler by eliminating
      boilerplate code.
      Signed-off-by: default avatarWei Yongjun <weiyongjun1@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a084ab33
    • Wei Yongjun's avatar
      net: dsa: qca8k: fix non static symbol warning · fcfbfd68
      Wei Yongjun authored
      Fixes the following sparse warning:
      
      drivers/net/dsa/qca8k.c:259:22: warning:
       symbol 'qca8k_regmap_config' was not declared. Should it be static?
      Signed-off-by: default avatarWei Yongjun <weiyongjun1@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fcfbfd68
    • David S. Miller's avatar
      Merge branch 'sctp-align' · 9ba62f95
      David S. Miller authored
      Marcelo Ricardo Leitner says:
      
      ====================
      Rename WORD_TRUNC/ROUND macros and use them
      
      This patchset aims to rename these macros to a non-confusing name, as
      reported by David Laight and David Miller, and to update all remaining
      places to make use of it, which was 1 last remaining spot.
      
      v3:
      - Name it SCTP_PAD4 instead of SCTP_ALIGN4, as suggested by David Laight
      v2:
      - fixed 2nd patch summary
      
      Details on the specific changelogs.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9ba62f95
    • Marcelo Ricardo Leitner's avatar
      sctp: make use of SCTP_TRUNC4 macro · 4a225ce3
      Marcelo Ricardo Leitner authored
      And avoid the usage of '&~3'. This is the last place still not using
      the macro.
      Also break the line to make it easier to read.
      Signed-off-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4a225ce3
    • Marcelo Ricardo Leitner's avatar
      sctp: rename WORD_TRUNC/ROUND macros · e2f036a9
      Marcelo Ricardo Leitner authored
      To something more meaningful these days, specially because this is
      working on packet headers or lengths and which are not tied to any CPU
      arch but to the protocol itself.
      
      So, WORD_TRUNC becomes SCTP_TRUNC4 and WORD_ROUND becomes SCTP_PAD4.
      Reported-by: default avatarDavid Laight <David.Laight@ACULAB.COM>
      Reported-by: default avatarDavid Miller <davem@davemloft.net>
      Signed-off-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e2f036a9
    • David S. Miller's avatar
      Merge branch 'mlx5e-xdp' · b80b8d7a
      David S. Miller authored
      Tariq Toukan says:
      
      ====================
      mlx5e XDP support
      
      This series adds XDP support in mlx5e driver.
      This includes the use cases: XDP_DROP, XDP_PASS, and XDP_TX.
      
      Single stream performance tests show 16.5 Mpps for XDP_DROP,
      and 12.4 Mpps for XDP_TX, with nice scalability for multiple streams/rings.
      
      This rate of XDP_DROP is lower than the 32 Mpps we got in previous
      implementation, when Striding RQ was used.
      
      We moved to non-Striding RQ, as some XDP_TX requirements (like headroom,
      packet-per-page) cannot be satisfied with the current Striding RQ HW,
      and we decided to fully support both DROP/TX.
      
      Few directions are considered in order to enable the faster rate for XDP_DROP,
      e.g a possibility for users to enable Striding RQ so they choose optimized
      XDP_DROP on the price of partial XDP_TX functionality, or some HW changes.
      
      Series generated against net-next commit:
      cf714ac1 'ipvlan: Fix dependency issue'
      
      Thanks,
      Tariq
      
      V2:
      * patch 8:
       - when XDP_TX fails, call mlx5e_page_release and drop the packet.
       - update xdp_tx counter within mlx5e_xmit_xdp_frame.
         (mlx5e_xmit_xdp_frame return value becomes obsolete, change it to void)
       - drop the packet for unknown XDP return code.
      * patch 9:
       - use a boolean for xdp_doorbell in SQ struct, instead of dragging it
         throughout the functions calls.
       - handle doorbell and counters within mlx5e_xmit_xdp_frame.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b80b8d7a
    • Saeed Mahameed's avatar
      net/mlx5e: XDP TX xmit more · 35b510e2
      Saeed Mahameed authored
      Previously we rang XDP SQ doorbell on every forwarded XDP packet.
      
      Here we introduce a xmit more like mechanism that will queue up more
      than one packet into SQ (up to RX napi budget) w/o notifying the hardware.
      
      Once RX napi budget is consumed and we exit napi RX loop, we will
      flush (doorbell) all XDP looped packets in case there are such.
      
      XDP forward packet rate:
      
      Comparing XDP with and w/o xmit more (bulk transmit):
      
      RX Cores    XDP TX       XDP TX (xmit more)
      ---------------------------------------------------
      1           6.5Mpps      12.4Mpps
      2          13.2Mpps      24.2Mpps
      4          25.2Mpps      36.3Mpps*
      8          36.3Mpps*     36.3Mpps*
      
      *My xmitter was limited to 36.3Mpps, so it is the bottleneck.
      It seems that receive side can handle more.
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      35b510e2
    • Saeed Mahameed's avatar
      net/mlx5e: XDP TX forwarding support · b5503b99
      Saeed Mahameed authored
      Adding support for XDP_TX forwarding from xdp program.
      Using XDP, now user can loop packets out of the same port.
      
      We create a dedicated TX SQ for each channel that will serve
      XDP programs that return XDP_TX action to loop packets back to
      the wire directly from the channel RQ RX path.
      
      For that RX pages will now need to be mapped bi-directionally,
      and on XDP_TX action we will sync the page back to device then
      queue it into SQ for transmission.  The XDP xmit frame function will
      report back to the RX path if the page was consumed (transmitted), if so,
      RX path will forget about that page as if it were released to the stack.
      Later on, on XDP TX completion, the page will be released back to the
      page cache.
      
      For simplicity this patch will hit a doorbell on every XDP TX packet.
      
      Next patch will introduce a xmit more like mechanism that will
      queue up more than one packet into SQ w/o notifying the hardware,
      once RX napi loop is done we will hit doorbell once for all XDP TX
      packets form the previous loop.  This should drastically improve
      XDP TX performance.
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b5503b99
    • Saeed Mahameed's avatar
      net/mlx5e: Have a clear separation between different SQ types · f10b7cc7
      Saeed Mahameed authored
      Make a clear separate between Regular SQ (TXQ) and ICO SQ creation,
      destruction and union their mutual information structures.
      
      Don't allocate redundant TXQ skb/wqe_info/dma_fifo arrays for ICO SQ.
      And have a different SQ edge for ICO SQ than TXQ SQ, to be more
      accurate.
      
      In preparation for XDP TX support.
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f10b7cc7
    • Rana Shahout's avatar
      net/mlx5e: XDP fast RX drop bpf programs support · 86994156
      Rana Shahout authored
      Add support for the BPF_PROG_TYPE_PHYS_DEV hook in mlx5e driver.
      
      When XDP is on we make sure to change channels RQs type to
      MLX5_WQ_TYPE_LINKED_LIST rather than "striding RQ" type to
      ensure "page per packet".
      
      On XDP set, we fail if HW LRO is set and request from user to turn it
      off.  Since on ConnectX4-LX HW LRO is always on by default, this will be
      annoying, but we prefer not to enforce LRO off from XDP set function.
      
      Full channels reset (close/open) is required only when setting XDP
      on/off.
      
      When XDP set is called just to exchange programs, we will update
      each RQ xdp program on the fly and for synchronization with current
      data path RX activity of that RQ, we temporally disable that RQ and
      ensure RX path is not running, quickly update and re-enable that RQ,
      for that we do:
      	- rq.state = disabled
      	- napi_synnchronize
      	- xchg(rq->xdp_prg)
      	- rq.state = enabled
      	- napi_schedule // Just in case we've missed an IRQ
      
      Packet rate performance testing was done with pktgen 64B packets and on
      TX side and, TC drop action on RX side compared to XDP fast drop.
      
      CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
      
      Comparison is done between:
      	1. Baseline, Before this patch with TC drop action
      	2. This patch with TC drop action
      	3. This patch with XDP RX fast drop
      
      RX Cores  Baseline(TC drop)    TC drop    XDP fast Drop
      --------------------------------------------------------------
      1            5.3Mpps           5.3Mpps     16.5Mpps
      2           10.2Mpps          10.2Mpps     31.3Mpps
      4           20.5Mpps          19.9Mpps     36.3Mpps*
      
      *My xmitter was limited to 36.3Mpps, so it is the bottleneck.
      It seems that receive side can handle more.
      Signed-off-by: default avatarRana Shahout <ranas@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      86994156
    • Saeed Mahameed's avatar
      net/mlx5e: Dynamic RQ type infrastructure · 2fc4bfb7
      Saeed Mahameed authored
      Add two helper functions to allow dynamic changes of RQ type.
      
      mlx5e_set_rq_priv_params and mlx5e_set_rq_type_params will be
      used on netdev creation to determine the default RQ type.
      
      This will be needed later for downstream patches of XDP support.
      When enabling XDP we will dynamically move from striding RQ to
      linked list RQ type.
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2fc4bfb7
    • Saeed Mahameed's avatar
      net/mlx5e: Slightly reduce hardware LRO size · e4b85508
      Saeed Mahameed authored
      Before this patch LRO size was 64K, now with build_skb requires
      extra room, headroom + sizeof(skb_shared_info) added to the data
      buffer will make  wqe size or page_frag_size slightly larger than
      64K which will demand order 5 page instead of order 4 in 4K page systems.
      
      We take those extra bytes from hardware LRO data size in order to not
      increase the required page order for when hardware LRO is enabled.
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e4b85508
    • Saeed Mahameed's avatar
      net/mlx5e: Union RQ RX info per RQ type · 21c59685
      Saeed Mahameed authored
      We have two types of RX RQs, and they use two separate sets of
      info arrays and structures in RX data path function.  Today those
      structures are mutually exclusive per RQ type, hence one kind is
      allocated on RQ creation according to the RQ type.
      
      For better cache locality and to minimalize the
      sizeof(struct mlx5e_rq), in this patch we define them as a union.
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      21c59685
    • Saeed Mahameed's avatar
      net/mlx5e: Build RX SKB on demand · 1bfecfca
      Saeed Mahameed authored
      For non-striding RQ configuration before this patch we had a ring
      with pre-allocated SKBs and mapped the SKB->data buffers for
      device.
      
      For robustness and better RX data buffers management, we allocate a
      page per packet and build_skb around it.
      
      This patch (which is a prerequisite for XDP) will actually reduce
      performance for normal stack usage, because we are now hitting a bottleneck
      in the page allocator. We use the page-cache to restore or even improve
      performance in comparison to the old RX scheme.
      
      Packet rate performance testing was done with pktgen 64B packets on xmit
      side and TC ingress dropping action on RX side.
      
      CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
      
      Comparison is done between:
       1.Baseline, before 'net/mlx5e: Build RX SKB on demand'
       2.Build SKB with RX page cache (This patch)
      
      RX Cores  Baseline    Build SKB+page-cache    Improvement
      -----------------------------------------------------------
      1          4.16Mpps       5.33Mpps                28%
      2          7.16Mpps      10.24Mpps                43%
      4         13.61Mpps      20.51Mpps                51%
      8         25.32Mpps      32.00Mpps                26%
      
      All respective cores were 100% utilized.
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1bfecfca
    • Eric Dumazet's avatar
      tcp: implement TSQ for retransmits · f9616c35
      Eric Dumazet authored
      We saw sch_fq drops caused by the per flow limit of 100 packets and TCP
      when dealing with large cwnd and bursts of retransmits.
      
      Even after increasing the limit to 1000, and even after commit
      10d3be56 ("tcp-tso: do not split TSO packets at retransmit time"),
      we can still have these drops.
      
      Under certain conditions, TCP can spend a considerable amount of
      time queuing thousands of skbs in a single tcp_xmit_retransmit_queue()
      invocation, incurring latency spikes and stalls of other softirq
      handlers.
      
      This patch implements TSQ for retransmits, limiting number of packets
      and giving more chance for scheduling packets in both ways.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f9616c35
    • David S. Miller's avatar
      Merge branch 'mv88e6390-prep' · 0f1100c1
      David S. Miller authored
      Andrew Lunn says:
      
      ====================
      Preparation for mv88e6390
      
      These two patches are a couple of preparation steps for supporting the
      the MV88E6390 family of chips. This is a new generation from Marvell,
      and will need more feature flags than are currently available in an
      unsigned long. Expand to an unsigned long long. The MV88E6390 also
      places its port registers somewhere else, so add a wrapper around port
      register access.
      
      v2:
       Rework wrappers to use mv88e6xxx_{read|write}
       Simpliy some (err < ) to (err)
      Add Reviewed by tag.
      
      v3::
       reg = reg & foo -> reg &= foo
       Fix over zealous s/ret/err
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0f1100c1
    • Andrew Lunn's avatar
      net: dsa: mv88e6xxx: Convert flag bits to unsigned long long · d6b1023a
      Andrew Lunn authored
      We are soon going to run out of flag bits on 32bit systems. Convert to
      unsigned long long.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Reviewed-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d6b1023a
    • Andrew Lunn's avatar
      net: dsa: mv88e6xxx: Add helper for accessing port registers · 0e7b9925
      Andrew Lunn authored
      There is a device coming soon which places its port registers
      somewhere different to all other Marvell switches supported so far.
      Add helper functions for reading/writing port registers, making it
      easier to handle this new device.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Reviewed-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0e7b9925
    • Nicolas Pitre's avatar
      ptp_clock: future-proofing drivers against PTP subsystem becoming optional · efee95f4
      Nicolas Pitre authored
      Drivers must be ready to accept NULL from ptp_clock_register() if the
      PTP clock subsystem is configured out.
      
      This patch documents that and ensures that all drivers cope well
      with a NULL return.
      Signed-off-by: default avatarNicolas Pitre <nico@linaro.org>
      Reviewed-by: default avatarEugenia Emantayev <eugenia@mellanox.com>
      Acked-by: default avatarRichard Cochran <richardcochran@gmail.com>
      Acked-by: default avatarEdward Cree <ecree@solarflare.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      efee95f4
    • Philippe Reynes's avatar
      net: ethernet: hisilicon: hns: use new api ethtool_{get|set}_link_ksettings · d270f76c
      Philippe Reynes authored
      The ethtool api {get|set}_settings is deprecated.
      We move this driver to new api {get|set}_link_ksettings.
      Signed-off-by: default avatarPhilippe Reynes <tremyfr@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d270f76c