- 15 Apr, 2020 28 commits
-
-
Sam Ravnborg authored
Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Rob Herring <robh@kernel.org> Cc: Peter Rosin <peda@axentia.se> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-33-sam@ravnborg.org
-
Sam Ravnborg authored
v2: - Add min/maxItems to mode-gpios (Rob) - Fix bug in description, mode is up to three gpios (Rob) Signed-off-by:
-
Sam Ravnborg authored
The txt binding specified the property "power-supply". But the example and the actual implementation in the linux-kernel uses "avdd-supply". So the binding is adjusted to use avdd-supply as this seems to be the correct choice. There are no DT files in the linux kernel to check. Signed-off-by:
-
Sam Ravnborg authored
There are no more references to simple-panel.txt. Delete it. Signed-off-by:
-
Sam Ravnborg authored
v2: - dropped use of spi-slave.yaml (Maxime) - added unevaluatedProperties (Maxime) Signed-off-by: -
Sam Ravnborg authored
v2: - drop use of spi-slave.yaml (Maxime) - add unevaluatedProperties (Maxime) - rename node in example to panel (Rob) Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
-
Sam Ravnborg authored
Signed-off-by:
-
Sam Ravnborg authored
v2: - dropped use of spi-slave.yaml (Maxime) - added unevaluatedProperties (Maxime) Signed-off-by:
-
Sam Ravnborg authored
v2: - drop use of spi-slave.yaml (Maxime) - added unevaluatedProperties (Maxime) - added type to width/height properties (Rob) Signed-off-by:
-
Sam Ravnborg authored
Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Sam Ravnborg authored
For samsung there was two AMOLED panels with the same description. Collect them in one binding file. Signed-off-by:
-
Sam Ravnborg authored
v2: - Fix entry in MAINTAINERS - Add reg number to node name (Rob) - Fix stray spaces Signed-off-by:
-
Sam Ravnborg authored
osddisplays,osd101t2587-53ts is compatible with panel-simple-dsi binding, so list the compatible in the panel-simple-dsi binding file. v2: - It is a DSI panel, move to -dsi binding (Tomi) Signed-off-by:
-
Sam Ravnborg authored
v2: - Dropped spi-slave (Maxime) - Added unevaluatedProperties (Maxime) - Deleted needless compatible from example (Rob) Signed-off-by:
Heiko Schocher <hs@denx.de> Reviewed-by:
-
Sam Ravnborg authored
Add the lg panels that matches the panel-simple binding to panel-simple.yaml Signed-off-by:
Brian Masney <masneyb@onstation.org> Reviewed-by:
-
Sam Ravnborg authored
kingdisplay,kd097d04 matches the panel-simple-dsi binding. The only difference is that enable-gpios is now an optional property. Signed-off-by:
-
Sam Ravnborg authored
v2: - Drop use of spi-slave.yaml (Maxime) - Introduce unevaluatedProperties (Maxime) Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reviewed-by:
-
Sam Ravnborg authored
v2: - drop address in dsi node in example (Rob) Signed-off-by:
Vinay Simha BN <simhavcs@gmail.com> Reviewed-by:
-
Sam Ravnborg authored
v3: - Fix stray spaces Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Sam Ravnborg authored
Signed-off-by:
-
Sam Ravnborg authored
Updating this binding identified an issue in the example in the allwinner,sun6i-a31-mipi-dsi binding. Fix the example so no new warnings are introduced. v2: - fix example in allwinner,sun6i-a31-mipi-dsi (Rob) Signed-off-by:
-
Sam Ravnborg authored
The .txt binding explains: " The following optional properties only apply to RGB and YUV input modes and can be omitted for BT.656 input modes: " This constraint is not implmented in the DT Schema. The original binding from the .txt file referenced properties that is included in panel-timing.yaml. The properties in question are: - pixelclk-active - de-active - hsync-active - vsync-active These properties was dropped in the conversion as they are not relevant. v2: - drop properties from panel-timing (Linus) - drop use of spi-slave.yaml (Maxime) - introduce unevaluatedProperties (Maxime) - dropped unused properties (Linus) - delete stray spaces Signed-off-by: -
Sam Ravnborg authored
v2: - Fix entry in MAINTAINERS v3: - Fix panel@0 in example (Rob) Signed-off-by:
-
Sam Ravnborg authored
v2: - Fix entry in MAINTAINERS Signed-off-by:
-
Sam Ravnborg authored
The binding for this panel is a SPI slave. v2: - Drop use of spi-slave (Maxime) - Introude unevaluatedProperties (Maxime) - Drop reg entry in example (Rob) Signed-off-by:
-
Sam Ravnborg authored
Several bindings specifies a "te-gpios" for tearing effect signal. Add this to panel-common so we have a shared definition. Signed-off-by:
-
Sam Ravnborg authored
Rob wrote: Uhhh, it's looking for dsi-controller(@.*)? which is not the common case found in dts files. We should fix that to dsi(@.*)?. See: https://lore.kernel.org/dri-devel/20200319032222.GK29911@bogus/ Fix it. Signed-off-by: -
Colin Ian King authored
There is a spelling mistake in a DRM_DEBUG_KMS debug message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200415083420.366279-1-colin.king@canonical.com
-
- 14 Apr, 2020 4 commits
-
-
Daniel Vetter authored
We've had lots of conversions to embeddeding, but didn't stop using ->dev_private. Which defeats the point of this. Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200403135828.2542770-4-daniel.vetter@ffwll.ch
-
Sam Ravnborg authored
Both port and ports names may be used in a panel-lvds binding port - for a single port ports - if there is more than one port in sub-nodes Fixes the following warning: advantech,idk-2121wr.example.dt.yaml: panel-lvds: 'port' is a required property advantech,idk-2121wr.yaml needs several ports, so uses a ports node. v2: - Use oneOf - makes the logic more obvious (Rob) - Added Fixes tag - Added port: true, ports:true v3: - Indent port/ports in required two spaces (Rob) Signed-off-by:
-
Bogdan Togorean authored
ADV7511 support sample rates up to 192kHz. CTS and N parameters should be computed accordingly so this commit extend the list up to maximum supported sample rate. Signed-off-by:
Bogdan Togorean <bogdan.togorean@analog.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Bogdan Togorean authored
ADV7511 support I2S or SPDIF as audio input interfaces. This commit enable support for SPDIF. Signed-off-by:
-
- 13 Apr, 2020 1 commit
-
-
John Stultz authored
Daniel noted[1] that commit d606dc9a ("drm: kirin: Add register connect helper functions in drm init") was unnecessary and incorrect, as drm_dev_register does register connectors for us. Thus, this patch reverts the change as suggested by Daniel. [1]: https://lore.kernel.org/lkml/CAKMK7uHr5U-pPsxdQ4MpfK5v8iLjphDFug_3VTiUAf06nhS=yQ@mail.gmail.com/ Cc: Xu YiPing <xuyiping@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel <dri-devel@lists.freedesktop.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Reviewed-by:
Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by:
-
- 12 Apr, 2020 1 commit
-
-
Sam Ravnborg authored
Laurent Pinchart <laurent.pinchart@ideasonboard.com> and Jani Nikula <jani.nikula@intel.com> both suggested to make the pointer to struct ipu_di_signal_cfg const. Fix this. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Enrico Weigelt <info@metux.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200408182926.GA21997@ravnborg.org
-
- 09 Apr, 2020 6 commits
-
-
Chris Wilson authored
A few very simple testcases to exercise the dma-fence-chain API. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200409110101.18400-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Whenever we walk along the dma-fence-chain, we prune signaled links to keep the chain nice and tidy. This leads to situations where we can prune a link and report the earlier fence as the target seqno -- violating our own consistency checks that the seqno is not more advanced than the last element in a dma-fence-chain. Report a NULL fence and success if the seqno has already been signaled. Signed-off-by:
-
Chris Wilson authored
Inside dma-fence-chain, we use a cmpxchg on an RCU-protected pointer. To avoid the sparse warning for using the RCU pointer directly, we have to cast away the __rcu annotation. However, we don't need to use void* everywhere and can stick to the dma_fence*. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200409110101.18400-1-chris@chris-wilson.co.uk
-
Lyude Paul authored
Although it's not unexpected for drm_dp_check_act_status() to fail due to DPCD read failures (as the hub may have just been unplugged suddenly), timeouts are a bit more worrying as they either mean we need a longer timeout value, or we aren't setting up payload allocations properly. So, let's start printing errors on timeouts. Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: Sean Paul <sean@poorly.run> Reviewed-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-5-lyude@redhat.com
-
Lyude Paul authored
Currently we only poll for an ACT up to 30 times, with a busy-wait delay of 100µs between each attempt - giving us a timeout of 2900µs. While this might seem sensible, it would appear that in certain scenarios it can take dramatically longer then that for us to receive an ACT. On one of the EVGA MST hubs that I have available, I observed said hub sometimes taking longer then a second before signalling the ACT. These delays mostly seem to occur when previous sideband messages we've sent are NAKd by the hub, however it wouldn't be particularly surprising if it's possible to reproduce times like this simply by introducing branch devices with large LCTs since payload allocations have to take effect on every downstream device up to the payload's target. So, instead of just retrying 30 times we poll for the ACT for up to 3ms, and additionally use usleep_range() to avoid a very long and rude busy-wait. Note that the previous retry count of 30 appears to have been arbitrarily chosen, as I can't find any mention of a recommended timeout or retry count for ACTs in the DisplayPort 2.0 specification. This also goes for the range we were previously using for udelay(), although I suspect that was just copied from the recommended delay for link training on SST devices. Changes since v1: * Use readx_poll_timeout() instead of open-coding timeout loop - Sean Paul Changes since v2: * Increase poll interval to 200us - Sean Paul * Print status in hex when we timeout waiting for ACT - Sean Paul Signed-off-by:
-
Lyude Paul authored
Just add a bit more line wrapping, get rid of some extraneous whitespace, remove an unneeded goto label, and move around some variable declarations. No functional changes here. Signed-off-by:
-
