If blk_init_queue fails, we do not call put_disk on the current dr
(dr is decremented first in the error handling loop).

Cc: stable@vger.kernel.org
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Since commit 070ad7e7 ("floppy: convert to delayed work and single-thread
wq"), we end up calling alloc_ordered_workqueue multiple times inside
the loop, which shouldn't be intended. Besides the leak, other side
effect in the current code is if blk_init_queue fails, we would end up
calling unregister_blkdev even if we didn't call yet register_blkdev.

Just moved the allocation of floppy_wq before the loop, and adjusted the
code accordingly.

Cc: stable@vger.kernel.org # 3.5+
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drivers/block/xen-blkback/xenbus.c:260:5: warning: symbol 'xenvbd_sysfs_addif' was not declared. Should it be static?
drivers/block/xen-blkback/xenbus.c:284:6: warning: symbol 'xenvbd_sysfs_delif' was not declared. Should it be static?
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

My workload is a raid5 which had 16 disks. And used our filesystem to
write using direct-io mode.

I used the blktrace to find those message:
8,16   0     6647     2.453665504  2579  M   W 7493152 + 8 [md0_raid5]
8,16   0     6648     2.453672411  2579  Q   W 7493160 + 8 [md0_raid5]
8,16   0     6649     2.453672606  2579  M   W 7493160 + 8 [md0_raid5]
8,16   0     6650     2.453679255  2579  Q   W 7493168 + 8 [md0_raid5]
8,16   0     6651     2.453679441  2579  M   W 7493168 + 8 [md0_raid5]
8,16   0     6652     2.453685948  2579  Q   W 7493176 + 8 [md0_raid5]
8,16   0     6653     2.453686149  2579  M   W 7493176 + 8 [md0_raid5]
8,16   0     6654     2.453693074  2579  Q   W 7493184 + 8 [md0_raid5]
8,16   0     6655     2.453693254  2579  M   W 7493184 + 8 [md0_raid5]
8,16   0     6656     2.453704290  2579  Q   W 7493192 + 8 [md0_raid5]
8,16   0     6657     2.453704482  2579  M   W 7493192 + 8 [md0_raid5]
8,16   0     6658     2.453715016  2579  Q   W 7493200 + 8 [md0_raid5]
8,16   0     6659     2.453715247  2579  M   W 7493200 + 8 [md0_raid5]
8,16   0     6660     2.453721730  2579  Q   W 7493208 + 8 [md0_raid5]
8,16   0     6661     2.453721974  2579  M   W 7493208 + 8 [md0_raid5]
8,16   0     6662     2.453728202  2579  Q   W 7493216 + 8 [md0_raid5]
8,16   0     6663     2.453728436  2579  M   W 7493216 + 8 [md0_raid5]
8,16   0     6664     2.453734782  2579  Q   W 7493224 + 8 [md0_raid5]
8,16   0     6665     2.453735019  2579  M   W 7493224 + 8 [md0_raid5]
8,16   0     6666     2.453741401  2579  Q   W 7493232 + 8 [md0_raid5]
8,16   0     6667     2.453741632  2579  M   W 7493232 + 8 [md0_raid5]
8,16   0     6668     2.453748148  2579  Q   W 7493240 + 8 [md0_raid5]
8,16   0     6669     2.453748386  2579  M   W 7493240 + 8 [md0_raid5]
8,16   0     6670     2.453851843  2579  I   W 7493144 + 104 [md0_raid5]
8,16   0        0     2.453853661     0  m   N cfq2579 insert_request
8,16   0     6671     2.453854064  2579  I   W 7493120 + 24 [md0_raid5]
8,16   0        0     2.453854439     0  m   N cfq2579 insert_request
8,16   0     6672     2.453854793  2579  U   N [md0_raid5] 2
8,16   0        0     2.453855513     0  m   N cfq2579 Not idling.st->count:1
8,16   0        0     2.453855927     0  m   N cfq2579 dispatch_insert
8,16   0        0     2.453861771     0  m   N cfq2579 dispatched a request
8,16   0        0     2.453862248     0  m   N cfq2579 activate rq,drv=1
8,16   0     6673     2.453862332  2579  D   W 7493120 + 24 [md0_raid5]
8,16   0        0     2.453865957     0  m   N cfq2579 Not idling.st->count:1
8,16   0        0     2.453866269     0  m   N cfq2579 dispatch_insert
8,16   0        0     2.453866707     0  m   N cfq2579 dispatched a request
8,16   0        0     2.453867061     0  m   N cfq2579 activate rq,drv=2
8,16   0     6674     2.453867145  2579  D   W 7493144 + 104 [md0_raid5]
8,16   0     6675     2.454147608     0  C   W 7493120 + 24 [0]
8,16   0        0     2.454149357     0  m   N cfq2579 complete rqnoidle 0
8,16   0     6676     2.454791505     0  C   W 7493144 + 104 [0]
8,16   0        0     2.454794803     0  m   N cfq2579 complete rqnoidle 0
8,16   0        0     2.454795160     0  m   N cfq schedule dispatch

From above messages,we can find rq[W 7493144 + 104] and rq[W
7493120 + 24] do not merge.
Because the bio order is:
  8,16   0     6638     2.453619407  2579  Q   W 7493144 + 8 [md0_raid5]
  8,16   0     6639     2.453620460  2579  G   W 7493144 + 8 [md0_raid5]
  8,16   0     6640     2.453639311  2579  Q   W 7493120 + 8 [md0_raid5]
  8,16   0     6641     2.453639842  2579  G   W 7493120 + 8 [md0_raid5]
The bio(7493144) first and bio(7493120) later.So the subsequent
bios will be divided into two parts.
When flushing plug-list,because elv_attempt_insert_merge only support
backmerge,not supporting frontmerge.
So rq[7493120 + 24] can't merge with rq[7493144 + 104].

From my test,i found those situation can count 25% in our system.
Using this patch, there is no this situation.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
CC:Shaohua Li <shli@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Asai Thambi S P <asamymuthupa@micron.com>
CC: Pete Zaitcev <zaitcev@redhat.com>
CC: Cong Wang <xiyou.wangcong@gmail.com>
CC: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

CC: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Without the patch, bio_slab_max, representing bio_slabs capacity, is increased before krealloc() of bio_slabs. If krealloc() fails, bio_slab_max is too high. Fix that by only updating bio_slab_max if krealloc() is successful.
Signed-off-by: Anna Leuschner <anna.m.leuschner@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

__blk_queue_next_rl() finds next request list based on blkg_list
while skipping root_blkg in the list.
OTOH, root_rl is special as it may exist even without root_blkg.

Though the later part of the function handles such a case correctly,
exiting early is good for readability of the code.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk_put_rl() does not call blkg_put() for q->root_rl because we
don't take request list reference on q->root_blkg.
However, if root_blkg is once attached then detached (freed),
blk_put_rl() is confused by the bogus pointer in q->root_blkg.

For example, with !CONFIG_BLK_DEV_THROTTLING &&
CONFIG_CFQ_GROUP_IOSCHED,
switching IO scheduler from cfq to deadline will cause system stall
after the following warning with 3.6:

> WARNING: at /work/build/linux/block/blk-cgroup.h:250
> blk_put_rl+0x4d/0x95()
> Modules linked in: bridge stp llc sunrpc acpi_cpufreq freq_table mperf
> ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4
> Pid: 0, comm: swapper/0 Not tainted 3.6.0 #1
> Call Trace:
>  <IRQ>  [<ffffffff810453bd>] warn_slowpath_common+0x85/0x9d
>  [<ffffffff810453ef>] warn_slowpath_null+0x1a/0x1c
>  [<ffffffff811d5f8d>] blk_put_rl+0x4d/0x95
>  [<ffffffff811d614a>] __blk_put_request+0xc3/0xcb
>  [<ffffffff811d71a3>] blk_finish_request+0x232/0x23f
>  [<ffffffff811d76c3>] ? blk_end_bidi_request+0x34/0x5d
>  [<ffffffff811d76d1>] blk_end_bidi_request+0x42/0x5d
>  [<ffffffff811d7728>] blk_end_request+0x10/0x12
>  [<ffffffff812cdf16>] scsi_io_completion+0x207/0x4d5
>  [<ffffffff812c6fcf>] scsi_finish_command+0xfa/0x103
>  [<ffffffff812ce2f8>] scsi_softirq_done+0xff/0x108
>  [<ffffffff811dcea5>] blk_done_softirq+0x8d/0xa1
>  [<ffffffff810915d5>] ?
>  generic_smp_call_function_single_interrupt+0x9f/0xd7
>  [<ffffffff8104cf5b>] __do_softirq+0x102/0x213
>  [<ffffffff8108a5ec>] ? lock_release_holdtime+0xb6/0xbb
>  [<ffffffff8104d2b4>] ? raise_softirq_irqoff+0x9/0x3d
>  [<ffffffff81424dfc>] call_softirq+0x1c/0x30
>  [<ffffffff81011beb>] do_softirq+0x4b/0xa3
>  [<ffffffff8104cdb0>] irq_exit+0x53/0xd5
>  [<ffffffff8102d865>] smp_call_function_single_interrupt+0x34/0x36
>  [<ffffffff8142486f>] call_function_single_interrupt+0x6f/0x80
>  <EOI>  [<ffffffff8101800b>] ? mwait_idle+0x94/0xcd
>  [<ffffffff81018002>] ? mwait_idle+0x8b/0xcd
>  [<ffffffff81017811>] cpu_idle+0xbb/0x114
>  [<ffffffff81401fbd>] rest_init+0xc1/0xc8
>  [<ffffffff81401efc>] ? csum_partial_copy_generic+0x16c/0x16c
>  [<ffffffff81cdbd3d>] start_kernel+0x3d4/0x3e1
>  [<ffffffff81cdb79e>] ? kernel_init+0x1f7/0x1f7
>  [<ffffffff81cdb2dd>] x86_64_start_reservations+0xb8/0xbd
>  [<ffffffff81cdb3e3>] x86_64_start_kernel+0x101/0x110

This patch clears q->root_blkg and q->root_rl.blkg when root blkg
is destroyed.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Fix the warning:

  kernel/module_signing.c:195:2: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t'

by using the proper 'z' modifier for printing a size_t.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull m68k updates from Geert Uytterhoeven:
 "Just the expected UAPI disintegration and the "new" kcmp syscall."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Wire up kcmp
  m68k: Remove empty #ifdef/#else/#endif block
  UAPI: (Scripted) Disintegrate arch/m68k/include/asm

Commit 7f8d4cad ("Input: extend the number of event (and other)
devices") made evdev, joydev and mousedev to embed struct cdev into
their respective structures representing input devices.

Unfortunately character device structure may outlive the parent
structure unless we do not set it up as parent of character device so
that it will stay pinned until character device is freed.

Also, now that parent structure is pinned while character device exists
we do not need to pin and unpin it every time user opens or closes it.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In certain cases (for example when a cdev structure is embedded into
another object whose lifetime is controlled by a separate kobject) it is
beneficial to tie lifetime of another object to the lifetime of
character device so that related object is not freed until after
char_dev object is freed.

To achieve this let's pin kobject's parent when doing cdev_add() and
unpin when last reference to cdev structure is being released.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull arm64 fixes from Catalin Marinas:
 "Main changes:
   - AArch64 Linux compilation fixes following 3.7-rc1 changes
     (MODULES_USE_ELF_RELA, update_vsyscall() prototype)
   - Unnecessary register setting in start_thread() (thanks to Al Viro)
   - ptrace fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: fix alignment padding in assembly code
  arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints
  arm64: ptrace: make structure padding explicit for debug registers
  arm64: No need to set the x0-x2 registers in start_thread()
  arm64: Ignore memory blocks below PHYS_OFFSET
  arm64: Fix the update_vsyscall() prototype
  arm64: Select MODULES_USE_ELF_RELA
  arm64: Remove duplicate inclusion of mmu_context.h in smp.c

An interesting effect of using the generic version of linkage.h
is that the padding is defined in terms of x86 NOPs, which can have
even more interesting effects when the assembly code looks like this:

ENTRY(func1)
	mov	x0, xzr
ENDPROC(func1)
	// fall through
ENTRY(func2)
	mov	x0, #1
	ret
ENDPROC(func2)

Admittedly, the code is not very nice. But having code from another
architecture doesn't look completely sane either.

The fix is to add arm64's version of linkage.h, which causes the insertion
of proper AArch64 NOPs.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The min/max call needed to have explicit types on some architectures
(e.g. mn10300). Use clamp_t instead to avoid the warning:

  kernel/sys.c: In function 'override_release':
  kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default]
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fixes from Ingo Molnar:
 "Assorted small fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf python: Properly link with libtraceevent
  perf hists browser: Add back callchain folding symbol
  perf tools: Fix build on sparc.
  perf python: Link with libtraceevent
  perf python: Initialize 'page_size' variable
  tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter
  lib tools traceevent: Add back pevent assignment in __pevent_parse_format()
  perf hists browser: Fix off-by-two bug on the first column
  perf tools: Remove warnings on JIT samples for srcline sort key
  perf tools: Fix segfault when using srcline sort key
  perf: Require exclude_guest to use PEBS - kernel side enforcement
  perf tool: Precise mode requires exclude_guest

Namhyung Kim reported that the build fails with:

  GEN python/perf.so
  gcc: error: python_ext_build/tmp//../../libtraceevent.a: No such file or directory
  error: command 'gcc' failed with exit status 1
  cp: cannot stat `python_ext_build/lib/perf.so': No such file or directory
  make: *** [python/perf.so] Error 1

We need to propagate the TE_PATH variable to the setup.py file.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-8umiPbm4sxpknKivbjgykhut@git.kernel.org
[ Fixed superfluous variable build error. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

* The python binding needs to link with libtraceevent and to initialize
  the 'page_size' variable so that mmaping works again.

* The callchain folding character that appears on the TUI just before
  the overhead had disappeared due to recent changes, add it back.

* Intel PEBS in VT-x context uses the DS address as a guest linear address,
  even though its programmed by the host as a host linear address. This either
  results in guest memory corruption and or the hardware faulting and 'crashing'
  the virtual machine.  Therefore we have to disable PEBS on VT-x enter and
  re-enable on VT-x exit, enforcing a strict exclude_guest.

  Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern.

* Fix build on sparc due to UAPI, fix from David Miller.

* Fixes for the srclike sort key for unresolved symbols and when processing
  samples in JITted code, where we don't have an ELF file, just an special
  symbol table, fixes from Namhyung Kim.

* Fix some leaks in libtraceevent, from Steven Rostedt.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull ARM soc fixes from Olof Johansson:
 "A set of fixes and some minor cleanups for -rc2:

   - A series from Arnd that fixes warnings in drivers and other code
     included by ARM defconfigs.  Most have been acked by corresponding
     maintainers (and seem quite hard to argue not picking up anyway in
     the few exception cases).
   - A few misc patches from the list for integrator/vt8500/i.MX
   - A batch of fixes to OMAP platforms, fixing:
     - boot problems on beaglebone,
     - regression fixes for local timers
     - clockdomain locking fixes
     - a few boot/sparse warnings
   - For Tegra:
     - Clock rate calculation overflow fix
     - Revert a change that removed timer clocks and a fix for symbol
       name clashes
   - For Renesas:
     - IO accessor / annotation cleanups to remove warnings
   - For Kirkwood/Dove/mvebu:
     - Fixes for device trees for Dove (some minor cleanups, some fixes)
     - Fixes for the mvebu gpio driver
     - Fix build problem for Feroceon due to missing ifdefs
     - Fix lsxl DTS files"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  ARM: kirkwood: fix buttons on lsxl boards
  ARM: kirkwood: fix LEDs names for lsxl boards
  ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2
  gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type
  ARM: dove: Add crypto engine to DT
  ARM: dove: Remove watchdog from DT
  ARM: dove: Restructure SoC device tree descriptor
  ARM: dove: Fix clock names of sata and gbe
  ARM: dove: Fix tauros2 device tree init
  ARM: dove: Add pcie clock support
  ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory
  ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable
  ARM: s3c: mark s3c2440_clk_add as __init_refok
  spi/s3c64xx: use correct dma_transfer_direction type
  ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message
  ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck
  ARM: OMAP: resolve sparse warning concerning debug_card_init()
  ARM: OMAP4: Fix twd_local_timer_register regression
  ARM: tegra: add tegra_timer clock
  ARM: tegra: rename tegra system timer
  ...

Emit the magic string that indicates a module has a signature after the
signature data instead of before it.  This allows module_sig_check() to
be made simpler and faster by the elimination of the search for the
magic string.  Instead we just need to do a single memcmp().

This works because at the end of the signature data there is the
fixed-length signature information block.  This block then falls
immediately prior to the magic number.

From the contents of the information block, it is trivial to calculate
the size of the signature data and thus the size of the actual module
data.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

From Jason Cooper:
 - improve #ifdef logic to prevent linker errors with CACHE_FEROCEON_L2
 - lsxl board dts fixes

* tag 'kirkwood_fixes_for_v3.7' of git://git.infradead.org/users/jcooper/linux:
  ARM: kirkwood: fix buttons on lsxl boards
  ARM: kirkwood: fix LEDs names for lsxl boards
  ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2

The module build process no longer creates intermediate files for module
signing, so remove them from .gitignore.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Turn sign-file into perl and merge in x509keyid.  The latter doesn't
need to be a separate script as it doesn't actually need to work out the
SHA1 sum of the X.509 certificate itself, since it can get that from the
X.509 certificate.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into fixes

A collection of warning fixes on non-ARM code from Arnd Bergmann:

* 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: s3c: mark s3c2440_clk_add as __init_refok
  spi/s3c64xx: use correct dma_transfer_direction type
  pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops
  USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit
  mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN
  SCSI: ARM: make fas216_dumpinfo function conditional
  SCSI: ARM: ncr5380/oak uses no interrupts

  /proc/<pid>/numa_maps scans vma and show mempolicy under
  mmap_sem. It sometimes accesses task->mempolicy which can
  be freed without mmap_sem and numa_maps can show some
  garbage while scanning.

This patch tries to take reference count of task->mempolicy at reading
numa_maps before calling get_vma_policy(). By this, task->mempolicy
will not be freed until numa_maps reaches its end.

V2->v3
  -  updated comments to be more verbose.
  -  removed task_lock() in numa_maps code.
V1->V2
  -  access task->mempolicy only once and remember it.  Becase kernel/exit.c
     can overwrite it.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull miscellaneous x86 fixes from Peter Anvin:
 "The biggest ones are fixing suspend/resume breakage on 32 bits, and an
  interrim fix for mapping over holes that allows AMD kit with more than
  1 TB.

  A final solution for the latter is in the works, but involves some
  fairly invasive changes that will probably mean it will only be
  appropriate for 3.8."

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, MCE: Remove bios_cmci_threshold sysfs attribute
  x86, amd, mce: Avoid NULL pointer reference on CPU northbridge lookup
  x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping.
  x86/cache_info: Use ARRAY_SIZE() in amd_l3_attrs()
  x86/reboot: Remove quirk entry for SBC FITPC
  x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID

Merge misc fixes from Andrew Morton:
 "Seven fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (7 patches)
  lib/dma-debug.c: fix __hash_bucket_find()
  mm: compaction: correct the nr_strict va isolated check for CMA
  firmware/memmap: avoid type conflicts with the generic memmap_init()
  pidns: remove recursion from free_pid_ns()
  drivers/video/backlight/lm3639_bl.c: return proper error in lm3639_bled_mode_store() error paths
  kernel/sys.c: fix stack memory content leak via UNAME26
  linux/coredump.h needs asm/siginfo.h

If there is only one match, the unique matched entry should be returned.

Without the fix, the upcoming dma debug interfaces ("dma-debug: new
interfaces to debug dma mapping errors") can't work reliably because
only device and dma_addr are passed to dma_mapping_error().
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Tested-by: Shuah Khan <shuah.khan@hp.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Thierry reported that the "iron out" patch for isolate_freepages_block()
had problems due to the strict check being too strict with "mm:
compaction: Iron out isolate_freepages_block() and
isolate_freepages_range() -fix1".  It's possible that more pages than
necessary are isolated but the check still fails and I missed that this
fix was not picked up before RC1.  This same problem has been identified
in 3.7-RC1 by Tony Prisk and should be addressed by the following patch.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Tony Prisk <linux@prisktech.co.nz>
Reported-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Richard Davies <richard@arachsys.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix this build error:

  drivers/firmware/memmap.c:240:19: error: conflicting types for 'memmap_init'
  arch/ia64/include/asm/pgtable.h:565:17: note: previous declaration of 'memmap_init' was here
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

free_pid_ns() operates in a recursive fashion:

free_pid_ns(parent)
  put_pid_ns(parent)
    kref_put(&ns->kref, free_pid_ns);
      free_pid_ns

thus if there was a huge nesting of namespaces the userspace may trigger
avalanche calling of free_pid_ns leading to kernel stack exhausting and a
panic eventually.

This patch turns the recursion into an iterative loop.

Based on a patch by Andrew Vagin.

[akpm@linux-foundation.org: export put_pid_ns() to modules]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Calling uname() with the UNAME26 personality set allows a leak of kernel
stack contents.  This fixes it by defensively calculating the length of
copy_to_user() call, making the len argument unsigned, and initializing
the stack buffer to zero (now technically unneeded, but hey, overkill).

CVE-2012-0957
Reported-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 5ab1c309 ("coredump: pass siginfo_t* to do_coredump() and
below, not merely signr") added siginfo_t to linux/coredump.h but forgot
to include asm/siginfo.h.  This breaks the build for UML/i386.  (And any
other arch where asm/siginfo.h is not magically preincluded...)

  In file included from arch/x86/um/elfcore.c:2:0: include/linux/coredump.h:15:25: error: unknown type name 'siginfo_t'
  make[1]: *** [arch/x86/um/elfcore.o] Error 1
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: "Jonathan M. Foote" <jmfoote@cert.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit 0b173bc4 ("mm: kill vma flag VM_CAN_NONLINEAR") we
replaced the VM_CAN_NONLINEAR test with checking whether the mapping has
a '->remap_pages()' vm operation, but there is no guarantee that there
it even has a vm_ops pointer at all.

Add the appropriate test for NULL vm_ops.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Xtensa patchset from Chris Zankel:
 "These are all limited to the xtensa subtree and include some important
  changes (adding long missing system calls for newer libc versions and
  other fixes) and the UAPI changes"

* tag 'xtensa-next-20121018' of git://github.com/czankel/xtensa-linux:
  xtensa: add missing system calls to the syscall table
  xtensa: minor compiler warning fix
  xtensa: Use Kbuild infrastructure to handle asm-generic headers
  UAPI: (Scripted) Disintegrate arch/xtensa/include/asm
  xtensa: fix unaligned usermode access
  xtensa: reorganize SR referencing
  xtensa: fix boot parameters parsing
  xtensa: fix missing return in do_page_fault for SIGBUS case
  xtensa: copy_thread with CLONE_VM must not copy live parent AR windows
  xtensa: fix memmove(), bcopy(), and memcpy().
  xtensa: ISS: fix rs_put_char
  xtensa: ISS: fix specific simcalls

Rusty had clearly not actually tested his module signing changes that I
(trustingly) applied as commit e2a666d5 ("kbuild: sign the modules
at install time"). That commit had multiple bugs:

 - using "${#VARIABLE}" to get the number of characters in a shell
   variable may look clever, but it's locale-dependent: it returns the
   number of *characters*, not bytes. And we do need bytes.

   So don't use "${#..}" expansion, do the stupid "wc -c" thing instead
   (where "c" stands for "bytes", not "characters", despite the letter.

 - Rusty had confused "siglen" and "signerlen", and his conversion
   didn't set "signerlen" at all, and incorrectly set "siglen" to the
   size of the signer, not the size of the signature.

End result: the modified sign-file script did create something that
superficially *looked* like a signature, but didn't actually work at
all, and would fail the signature check. Oops.

Tssk, tssk, Rusty.

But Rusty was definitely right that this whole thing should be rewritten
in perl by somebody who has the perl-fu to do so.  That is not me,
though - I'm just doing an emergency fix for the shell script.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit cb6b6df1 ("xen/pv-on-hvm kexec: add quirk for Xen 3.4 and
shutdown watches.") added the xen_strict_xenbus_quirk() function with an
old K&R-style declaration without proper typing, causing gcc to rightly
complain:

  drivers/xen/xenbus/xenbus_xs.c:628:13: warning: function declaration isn’t a prototype [-Wstrict-prototypes]

because we really don't live in caves using stone-age tools any more,
and the kernel has always used properly typed ANSI C function
declarations.

So if a function doesn't take arguments, we tell the compiler so
explicitly by adding the proper "void" in the prototype.

I'm sure there are tons of other examples of this kind of stuff in the
tree, but this is the one that hits my workstation config, so..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>